buy & sell, new & used machinery, machine tools & equipment

<Prev | 131 | 132 | 133 | 134 | 135 | 136 | 137 | 138 | 139 | 140 | Next>
Refine: Viewing 13101 - 13200 of 20811 matches
Sort by:
Items Per Page:  20 |  50 |  100
5/16" NUTAP M# MAS-8 TWIN SPINDLE NUT TAPPER
$RFQ
5/16" NUTAP M# MAS-8 TWIN SPINDLE NUT TAPPER
5/16" Nutap Model MAS-8 Twin Spindle Nut Tapper, Serial No 7669 4mm-8mm Product Range ( Tap Size) 15,000-21,000 PPH Hopper AC Motor and Controls Weight 2000 Lbs.
SHIMAZU SUPER 6 TAPPER
$RFQ
SHIMAZU SUPER 6 TAPPER
EQUIPPED WITH: 200 LITER HYD. TANK CAPACITY 3.7 KW 480 VOLT MOTOR WEIGHT .......................... 2250 LBS. O.A. DIM. ....................... 65" X 45" X 69"
SNOW Mdl# NT-1 TAPPER
$RFQ
SNOW Mdl# NT-1 TAPPER
#0-#10 Tap Size Range Mild Steel 2" Tap Head Stroke 6000 RPM Note - Set up for Vibe Feed with Platform but requires Feeder Bowl AC Motor and Control Weight 6500 Lbs
3/4" KANE & ROACH MDL# 2075 2-ROLL TUBE & BAR STRAIGHTENER
$RFQ
3/4" KANE & ROACH MDL# 2075 2-ROLL TUBE & BAR STRAIGHTENER
MANUFACTURER - KANE & ROACH SERIAL NUMBER - 207525 JOB NUMBER - 7420 MODEL NUMBER - 2075-ROT NUMBER OF ROLLS - 2 CAPACITY - 1/4"-3/4" OVERALL DIMENSIONS - 86" X 43" X 68" APPROXIMATE WEIG
1/4" x 12', CINCINNATI #1812 POWER SQUARING SHEAR
$RFQ
1/4" x 12', CINCINNATI #1812 POWER SQUARING SHEAR
CAPACITY..................... 1/4" LENGTH ...................... 12' EQUIPPED WITH: POWER BACK GAUGE SQUARING ARM (2) FRONT SUPPORTS 25 HP 220/440 VOLT 1680 AMPS 72/36 AMP MOTOR AND CONTROLS
1/4" x 10' CINCINNATI MODEL #2CC10 POWER SQUARING SHEAR
$RFQ
1/4" x 10' CINCINNATI MODEL #2CC10 POWER SQUARING SHEAR
YEAR OF MANUFACTURE....... 1980 CAPACITY ................. 1/4" MILD STEEL BED ...................... 10'7" L WIDTH BETWEEN HOUSINGS ... 10'3" SQUARING ARM ............. 10' SUPPORT ARM ..............
RWF SKIN PASS MILL
$RFQ
RWF SKIN PASS MILL
Year of Commissioning: 1960 Width: 250-840mm Gauge Range: 0.25 - 4mm Max Coil Weight: 12ton Entry Coiler ID: 500mm Max Entry Coil OD: 1700mm Exit Coiler ID: 500mm Max Exit Coil OD: 1700mm Maximum Line S
SZ 1 INNOCENTI ZR 22 32 SENDZIMIR MILL
$RFQ
SZ 1 INNOCENTI ZR 22 32 SENDZIMIR MILL
Year of Commissioning: 1960 Width: 300-822mm Input gauge range: max 3.2mm Output Gauge Range: min 0.1mm Maximum Speed: 600m/min Maximum Tension: 192kN Maximum Load: 400ton Coolant Type: Mineral Oil, 350
SZ 2 Innocenti ZR 22S 32 Sendzimir Mill
$RFQ
SZ 2 Innocenti ZR 22S 32 Sendzimir Mill
Year of Commissioning: 1971 Width: 300-822mm Input gauge range: max 5mm Output Gauge Range: min 0.25mm Maximum Speed: 450m/min Maximum Tension: 275kN Maximum Load: 400ton Coolant Type: Mineral Oil, 5000 l
DMS No. ZR 22BBS52 SENDZIMIR ROLLING MILL
$RFQ
DMS No. ZR 22BBS52 SENDZIMIR ROLLING MILL
Manufacturer : DMS (France) Commissioning date : 1992 Yearly production capacity : 250,000 t nominal Max speed : 2500 FPM Input materials : 0.250 " thick sheet x 52" max. width Output products range : 0.00
52" (1320mm) WATERBURY FARREL TYPE ZR-22B-52 COMPLETE REVERSING COLD ROLLING
$RFQ
52" (1320mm) WATERBURY FARREL TYPE ZR-22B-52 COMPLETE REVERSING COLD ROLLING
Mill Section: ZR-22B-52 Mill Type: Cold reversing mill Material: Silicon, Stainless Strip Width: 52" (1300mm) Entry Gauge Max.: 0.145" (3.7mm) Exit Gauge Min.: 0.0028" (0.1mm) Max. Coil Size (win
BOLDRINI Mdl#PSI-3650X152, 6" X 12' 3-ROLL PLATE BENDING ROLL
$RFQ
BOLDRINI Mdl#PSI-3650X152, 6" X 12' 3-ROLL PLATE BENDING ROLL
SPECIFICATIONS: SERIAL NO .3656 CAPACITY: PRE-BEND ROLLING CAPACITY 6" X 144" OVERALL LENGTH OF ROLLS 156" TOP ROLL DIAMTER 48" BOTTOM ROLL DIAMETER 45.85"
IHI 1600 TON + KOBE 1000 TON + KOBE 1000 TON TANDEM PRESS LINE
$RFQ
IHI 1600 TON + KOBE 1000 TON + KOBE 1000 TON TANDEM PRESS LINE
1. IHI 1600ton (Top Drive Link Press) Year of manufactured : 1984. April 16 spm Stroke : 850mm Die height : 1400mm Slide adjustment : 500mm 2. KOBE 1000ton Year of manufactured : 1966. April 20 spm Stroke : 65
IHI 1500 TON + KOBE 1200 TON + KOBE 600 TON TANDEM PRESS LINE
$RFQ
IHI 1500 TON + KOBE 1200 TON + KOBE 600 TON TANDEM PRESS LINE
IHI 1500ton + KOBE 1200ton + KOBE 600ton Press Line 1. IHI 1500ton (Top Drive 4P Link Press) Model : SL4-1500 Year of manufactured : 1977. July 16 spm Stroke : 800mm Die height : 1300mm Slide adjustment : 600mm
200 TON MINSTER STRAIGHT SIDE SINGLE CRANK PRESS
$RFQ
200 TON MINSTER STRAIGHT SIDE SINGLE CRANK PRESS
STROKE ............................ 10" RATED CAPACITY .................... 200 TONS BED AREA .......................... 36" F-B X 31-1/2" L-R (NO BOLSTER) WINDOW ............................ 18&#
200 TON ERIE TRIM STRAIGHT SIDE SINGLE CRANK PRESS
$RFQ
200 TON ERIE TRIM STRAIGHT SIDE SINGLE CRANK PRESS
RATED CAPACITY ............... 200 TONS BOLSTER AREA ................. 30" L-R X 36" F-B X 1-7/8" THICK BED OPENING .................. 30" L-R X 36" F-B WINDOW ....................... 20
150 TON DREIS & KRUMP (CHICAGO) #SS150-42-96 STRAIGHT SIDE DOUBLE CRANK PRESS
$RFQ
150 TON DREIS & KRUMP (CHICAGO) #SS150-42-96 STRAIGHT SIDE DOUBLE CRANK PRESS
Rated Capacity ............................... 150 Tons Bed Area ...............(l-r x f-b)........... 102" x 42" Ram Area ...............(l-r x f-b)........... 96" x 42" Bolster Area ...........(l
60 TON MINSTER PULSAR STAMPING PRESS
$RFQ
60 TON MINSTER PULSAR STAMPING PRESS
CAPACITY .............. 60 TON LENGTH OF STROKE ....... 1.25" SHUT HEIGHT ........... 9.38" - 11.12" BOLSTER .............. 36" X 23" ADJUSTMENT ............ 1.75" RAM PLATE .........
30 TON MINSTER PULSAR STAMPING PRESS
$RFQ
30 TON MINSTER PULSAR STAMPING PRESS
CAPACITY .............. 30 TON LENGTH OF STROKE ....... 1.25" SPM ............... 0 - 600 SHUT HEIGHT ........... 7.25" - 9" BOLSTER .............. 30" X 21" ADJUSTMENT ............ 1.75&#
30 TON MINSTER Mdl# TR2-30 PULSAR STAMPING PRESS
$RFQ
30 TON MINSTER Mdl# TR2-30 PULSAR STAMPING PRESS
CAPACITY .............. 30 TON LENGTH OF STROKE ....... 1.25" SPM ............... 0 - 600 SHUTSHIGHT ............ 7.25" - 9" BOLSTER .............. 30" X 21" ADJUSTMENT ............ 1.75&#
75 TON DAKE HYDRAULIC PRESS
$RFQ
75 TON DAKE HYDRAULIC PRESS
4 post downstroke type Floor standing Distance between 4" dia. posts: 63" L-R x 32" F-B Area of bed (nominal): 60" L-R x 45" F-B Overall dimensions of bed: 75" L-R x 45" F-B Bed
60 Ton BRUDERER Mdl# BSTA 60 II HL HIGH SPEED PRODUCTION PRESS
$RFQ
60 Ton BRUDERER Mdl# BSTA 60 II HL HIGH SPEED PRODUCTION PRESS
ADJUSTABLE STROKE .......... 5/8"- 2" 16mm - 51mm RAM ADJUSTMENT ............. 0- 64 mm RAM AREA ................... 810 x 420 mm BOLSTER .................... 940mm x 650mm (T slotted Tool Clampin
BAIRD Mdl#3-25 TRANSFER PRESS
$RFQ
BAIRD Mdl#3-25 TRANSFER PRESS
Tonnage: 25 Stroke: 2" Ram Stroke Transfer Stroke: 2" Die Set 11 Station - serial # 31108 295 1st Station Pull Down 5 Punch Stripping 3 Bottom Knock Ups - 5 stations Bijur Lube Pu
ROBERTSON-HARTFORD MODEL #2000 POINT FORMER
$RFQ
ROBERTSON-HARTFORD MODEL #2000 POINT FORMER
Blank Diameter Capacity ........................ #2 (.070) thru 5/16" Blank Length ................................... 3/16" to 2" Production Rate (w/stepless adjustment) ........ 325 to 700 Die Size ..
NATIONAL Mdl# 625 S3, UT II, 5 DIE COLD FORMER
$RFQ
NATIONAL Mdl# 625 S3, UT II, 5 DIE COLD FORMER
PPM ..................... 120 MAX LENGTH OF BLANK ..... 2-1/2" MAX DIE KNOCKOUT ........ 3" MOTOR.................... 40 HP 3 PHASE 50 CYCLE 220/ 440 116/67 AMPS FLOOR SPACE ............. 95" X 19'
5/16" NATIONAL M# S-2 COLD NUT FORMER
$RFQ
5/16" NATIONAL M# S-2 COLD NUT FORMER
5/16" National S-2 Cold Nut Former, Serial No 43737, 1972 1/2" Cutoff Diameter 9/16" Cutoff Length 3/4" Die KO 200 Pieces per Minute Equipped with: Bushing Cutoff and Bed Frame arranged for
5/16" NATIONAL M# S-2 COLD NUT FORMER
$RFQ
5/16" NATIONAL M# S-2 COLD NUT FORMER
5/16" National S-2 Cold Nut Former, Serial No 43734, 1971 1/2" Cutoff Diameter 9/16" Cutoff Length 3/4" Die KO 200 Pieces per Minute Equipped with: Bushing Cutoff and Bed Frame arranged for
HAAS M# VF-4 VERTICAL MACHINING CENTER
$RFQ
HAAS M# VF-4 VERTICAL MACHINING CENTER
SPECIFICATIONS: X-AXIS TRAVELS ........................... 50" 1.270mm Y-AXIS TRAVELS ........................... 20" 508mm Z AXIS TRAVEL ............................ 25" 635mm TABLE SIZE .......
WATERBURY FIVE ROLL PLATE LEVELER
$RFQ
WATERBURY FIVE ROLL PLATE LEVELER
6" Dia. Roll x 30" Wide Waterbury 5-Roll Plate Leveler Number of Rolls - 5 Configuration - 2 over 3 Max Width Opening - 30" Diameter of Rolls - 6" Motor - 15 HP, 860 RPM, Motor Frame 404 220/
2000 WATTS MAZAK MDL. SUPER TURBO - X510 HI-PRO-SUPERCHARGED LASER
$RFQ
2000 WATTS MAZAK MDL. SUPER TURBO - X510 HI-PRO-SUPERCHARGED LASER
* 2000 watt laser * Model - Super Turbo - X510 Hi-PRO-Supercharged * CO2 Laser YB-L200B 7M * Controller - Mazak L Plus * 5'x10' bed * December 1997 model * Upgraded non-contact cutting head - breakaway design * Up
1000 WATT MAZAK MDL. NEW TURBO-X510 CHAMPION LASER
$RFQ
1000 WATT MAZAK MDL. NEW TURBO-X510 CHAMPION LASER
* 1000 watt laser * Model - New Turbo-X510 Champion * CO2 Laser YB-L100B 7M * Controller - Mazatrol L-32B * 5'x10' bed * June 1997 model * Upgraded non-contact cutting head * Upgraded hydraulic sheet clamping * C
PELTZER & EHERLS MODEL# GB-20-4, 4 DIE, 5 STATION BOLTMASTER
$RFQ
PELTZER & EHERLS MODEL# GB-20-4, 4 DIE, 5 STATION BOLTMASTER
MAX WIRE STOCK DIA. ............... 20mm MAX CUT OFF LENGTH ................ 155mm DIE KNOCK-OUT STROKE MAX .......... 135mm PUNCH KNOCK OUT STROKE MAX ........ 22mm MACHINE CAPACITY .................. 2000 KN DIA
CHUN ZU Model# CBF-204L, 4 DIE PROGRESSIVE HEADER
$RFQ
CHUN ZU Model# CBF-204L, 4 DIE PROGRESSIVE HEADER
Specifications: 23mm Cutoff Diameter @ 85,000 PSI 30-240mm Cutoff Length 25-220mm Die Kickout 240mm Transferable Length 46mm PKO Stroke 45-80 Pieces per Minute 350,000 Kn Foge Tonnage Weight - 140,000 Lbs.
5/16" WATERBURY-FARREL Mdl# 11 ODDS HAND FEED OPEN DIE SGL STROKE RE HEADER
$RFQ
5/16" WATERBURY-FARREL Mdl# 11 ODDS HAND FEED OPEN DIE SGL STROKE RE HEADER
5/16" Maximum Wire Diameter 5 1/2" Open Die Cavity Note this machine does not have a feed box. It was designed to hand feed special long parts and double end parts with upgraded electrics and motor/
3/8" WATERBURY FARREL No. 22 DBL STROKE, OPEN DIE, SUPER LONG STROKE COLD HEADER
$RFQ
3/8" WATERBURY FARREL No. 22 DBL STROKE, OPEN DIE, SUPER LONG STROKE COLD HEADER
MAXIMU CUTOFF DIAMETER .............. 3/8" LENGTH UNDER HEAD ................... 10" 10" Length Under Head PIECES PER MINUTE ................... 40 - 50 Equipped with: DUAL FED ROLLS LEWIS ROT
5/8" NATIONAL DOUBLE STROKE COLD HEADER
$RFQ
5/8" NATIONAL DOUBLE STROKE COLD HEADER
SPEED (R.P.M.) ............... 140 PIECES PER MINUTE ............ 70 MAX LENGTH OF BLANK .......... 6" MIN LENGTH OF BLANK .......... 1-1/4" MAX LENGTH UNDER THE HEAD .... 5-1/2" MOTOR ..........
14" (355mm) CM FURNACES NARROW STRIP CONTINUOUS HYDROGEN ANNEALING FURNACE
$RFQ
14" (355mm) CM FURNACES NARROW STRIP CONTINUOUS HYDROGEN ANNEALING FURNACE
CM FURNACES NARROW STRIP ELECTRIC, CONTINUOUS ANNEALING LINE, ATMOSPHERE CONTROLLED SPECIFICATIONS MODEL: 5214-36-3z (C) Serial #: 0100052 Mfg date, 2001 Power Rating: 13 KVA Supply Line Voltage: 240 Supply
60" x 16 Ga ENGEL Mdl# 5-16 CUT-TO-LENGTH LINE
$RFQ
60" x 16 Ga ENGEL Mdl# 5-16 CUT-TO-LENGTH LINE
MAX WIDTH OF MATERIALS ................ 60" MAX THICK OF MATERIALS ................ 16 Ga. MS MOTOR ................................. 30 HP AC 3/60/230 EQUIPPED WITH: 5 DROP IN UNCOILERS - 10,000 # CAP. POWERE
72" X .250" 60,000# CINCINNATI/HERR VOSS CUT TO LENGTH LINE
$RFQ
72" X .250" 60,000# CINCINNATI/HERR VOSS CUT TO LENGTH LINE
Coil Thickness: .078" - .250" Material Width: 24" - 72" Weight Capacity: 60,000Lb Coil ID: 20" - 24" Coil OD: 72" Direction: Right to Left Entry L-Type Coil Car Hydraulic Li
1-1/2" X .094" HAVEN RE-CUT TUBE CUT OFF
$RFQ
1-1/2" X .094" HAVEN RE-CUT TUBE CUT OFF
Manufacturer: Haven Model: 871 Serial: 3140 Year: 1992 Max Tube Diameter: 1-1/2" Wall Thickness: .094" Hand of operation : left to right COMPLETE WITH: 20' Bundle loader / unscrambler Feed roll
72" x 10000# STAMCO BANDING LINE
$RFQ
72" x 10000# STAMCO BANDING LINE
4 Arm Exit Turnstile Power Rotation Power Push-Off Downlayer with Side Discharge 30' Powered Conveyor (Approx) 76" Roll Face Photo electric Eyes for Coil Positioning Banding Table Signode Banding Head
50,000 # X 60" BRADLEY COIL LIFTER
$RFQ
50,000 # X 60" BRADLEY COIL LIFTER
-50,000# Capacity -Motorized open/close -20" Min. - 60" Max. Width -Arms open to 65" max. -16" Min. ID -72" Max. OD -240 V DC Motor -Stand included -Shipping Weight: 3365 lb. (without
ChugaiRo Vertical Bright Annealing Line
$RFQ
ChugaiRo Vertical Bright Annealing Line
Year of Commissioning: 2007. Width: 500-1100mm Input gauge range: max 1.5mm Output Gauge Range: min 0.1mm Maximum Line Speed: 70m/min Maximum Coil Weight: 22ton Coil Dimension OD: 2200mm DeCoiler Mandrel
INGERSOL RAND #SSR-EP50SE AIR COMPRESSOR
$RFQ
INGERSOL RAND #SSR-EP50SE AIR COMPRESSOR
CAPACITY ........................ 194 CFM RATED OPERATING PRESSURE ........ 125 PSIG MAXIMUM DISCHARGE PRESSURE ...... 128 PSIG MAXIMUM MODULATE PRESSURE ....... 128 PSIG EQUIPPED WITH: 3HP COOLANT FAN MO
INGERSOL AIR COMPRESSOR MODEL #242-ON5, 80 GALLON VETICAL
$RFQ
INGERSOL AIR COMPRESSOR MODEL #242-ON5, 80 GALLON VETICAL
MODEL 242-ON5 80 GAL VERTICAL TANK 5 HP 1725/1425 RPM 230/460 VOLT 14/7-11/5.5 AMPS MOTOR TWO STAGE PISTON 175 PSI 16.8 CFM WEIGHT 520 LBS.
INGERSOL AIR COMPRESSOR MODEL #242-ON5, 80 GALLON VERTICAL
$RFQ
INGERSOL AIR COMPRESSOR MODEL #242-ON5, 80 GALLON VERTICAL
MODEL #242-ON5 80 GAL VERTICAL TANK TWO STAGE PISTON 5HP 1725/1425 RPM 230/160 VOLTS 14/7-11/5.5 AMPS MOTOR 175 PSI 16.8 CFM WEIGHT 530 LBS.
1985 MULTIPRESS MODEL FH20-20H HYDRAULIC PRESS, 20 TON
$RFQ
1985 MULTIPRESS MODEL FH20-20H HYDRAULIC PRESS, 20 TON
SPECIFICATIONS RATED CAPACITY 20 TONS STROKE (ADJUSTABLE): 12" THROAT: 10" DAYLIGHT: 21" BED SIZE: 26” X 17” RAM SPEED, CLOSING: 550 IPM RAM SPEED, PRESSING: 250
  • Tonnage: 20T
  • Stroke: 12"
    YASNAC MOTOMAN, 1995,
    $RFQ
    YASNAC MOTOMAN, 1995,
    EQUIPPED WITH: Motoman ENCM-RM 6015 Robot Yasnac Motoman MRC KG Control Miller Welder Axcess 675 675 Amps 16" Chuck
    NTC MODEL NV-4G,TWIN PALLET- 18 X 21
    $RFQ
    NTC MODEL NV-4G,TWIN PALLET- 18 X 21
    EQUIPPED WITH: Fanuc 21i-M Control 180 Degree Rotary Pallet Changer 21" x 18" Hydraulic Clamping 4-Axis Pulse Generator 40 ATC Auto Tool Length Measurement Inch/Metric Conversion Custom Macro B Ad
    MODEL S60 STUDER CNC CYLINDRICAL GRINDER
    $RFQ
    MODEL S60 STUDER CNC CYLINDRICAL GRINDER
    EQUIPPED WITH: Fanuc 16T Control Pendant Hand Control Coolant System w/Paper and Mag Seperator Headstock Tailstock w/Center Dresser Work Rest Isolation Transformer Aercology Mist Collector Foot Pedal Work Li
    12" x 28", TSCHUDIN, No. PL66,
    $RFQ
    12" x 28", TSCHUDIN, No. PL66,
    EQUIPPED WITH: Fanuc 16TB 2-Work Rests Pulse Generator Marposs Gauge P-5 SBS 4500 Balancer Barnes Chip Seperator w/Mag & Paper Filtration 460V/60Phase Coolant w/Mag Paper Light Curtain Mist Collector "Ae
    FELLOWS 20M REDLINER
    $RFQ
    FELLOWS 20M REDLINER
    EQUIPPED WITH: Recorder Pen Chart Paper Head and Tailstock Center SPECIFICATIONS: Max. Pitch Diameter: 18" Max. Centers: 28" Net Weight, Approximate: 1,600# Dimensions (LxWxH): 48" x 18"
    NO. GCU-12 NATIONAL BROACH, 12" CAP., CROWNING, UPFEED HEAD & TAILSTOCK
    $RFQ
    NO. GCU-12 NATIONAL BROACH, 12" CAP., CROWNING, UPFEED HEAD & TAILSTOCK
    IMMEDIATE DELIVERY EQUIPPED WITH: Crowning Diagonal Shaving 9" Cutter Head Power Headstock & Tailstock Auto Upfeed Trabon Tube New Splash Guard Feed & Speed Gears 220 - 440 - 480V 3 Phase 110V Pus
    MODEL 516 GLEASON GEAR LAPPER
    $RFQ
    MODEL 516 GLEASON GEAR LAPPER
    EQUIPPED WITH: Hydraulic Chucking Lapping System Drawbar Work Holding SPECIFICATIONS: Capacity: Diameter of Gear (Max): 24" Diameter of Pinion (Max): 12" Offset of Gear Spindle Above or Belo
    TYPE "A" BARBER COLMAN GEAR HOBBER
    $RFQ
    TYPE "A" BARBER COLMAN GEAR HOBBER
    SPECIFICATIONS: Max. Dia. Gear: 12" Max. Dia. Pitch: 4 dp
    MODEL 22 GLEASON HYPOID GEAR GENERATOR ROUGHER
    $RFQ
    MODEL 22 GLEASON HYPOID GEAR GENERATOR ROUGHER
    center> EQUIPPED WITH: Hydraulic Chucking Coolant Index Plates Gears SPECIFICATIONS: Machine Capacity: Longest Cone Distance:11" Largest Pitch Angle: 90 deg. Smallest Pitch Angle (without chamfer
    MODEL 22 GLEASON HYPOID GEAR GENERATOR FINISHER
    $RFQ
    MODEL 22 GLEASON HYPOID GEAR GENERATOR FINISHER
    center> EQUIPPED WITH: Stock Divider Hydraulic Chucking Lube Coolant Index Plates Change Gears SPECIFICATIONS: Machine Capacity: Longest Cone Distance:11" Largest Pitch Angle: 90 deg. Smallest
    MILLER #CP-300TS, 300A, mig, Millermatic wire feeder, gun, cart (984)
    $RFQ
    MILLER #CP-300TS, 300A, mig, Millermatic wire feeder, gun, cart (984)
    Model number CP-300TS SPECIFICATIONS: Primary: 208/230/460/3/60 Secondary: 300A @ 100% duty at 35 volts Maximum o
    12 Ga. x 52", NATIONAL, No. NH5212, hydraulic, 3 HP, 25 spm, NEW
    $RFQ
    12 Ga. x 52", NATIONAL, No. NH5212, hydraulic, 3 HP, 25 spm, NEW
    OPTIONAL ACCESSORIES: Powered back gauge with digital readout, model NBG52. . . . . . . . $ 5,916.00 57" squaring arm, model NSA 52. . . . . . . . . . . . . . . . . . . 704.00 FEATURES: National heavy duty
    12 Ga. x 52", NATIONAL, No. NA5212, air, NEW
    $RFQ
    12 Ga. x 52", NATIONAL, No. NA5212, air, NEW
    OPTIONAL ACCESSORIES: 57" squaring arm, model NSA 52 . . . . . . . . . . . . . . . . . . . $ 704.00 FEATURES: National offers three heavy duty air shears with cast iron side frames, all steel cutter heads and
    12 Ga. x 52", GMC, No. HS-0412MD, hydraulic, 3 HP, NEW
    $RFQ
    12 Ga. x 52", GMC, No. HS-0412MD, hydraulic, 3 HP, NEW
    SPECIFICATIONS: Maximum cutting length 52" Maximum thickness--mild steel 12 gauge Maximum thickness--stainless steel 16 gauge Strokes per minute--adjustable
    12 Ga. x 36", NATIONAL, No. NH3612, hydraulic, 3 HP, 40 spm, NEW
    $RFQ
    12 Ga. x 36", NATIONAL, No. NH3612, hydraulic, 3 HP, 40 spm, NEW
    OPTIONAL ACCESSORIES: Powered back gauge with digital readout, model NBG36. . . . . . . . $ 5,930.00 57" squaring arm, model NSA 36. . . . . . . . . . . . . . . . . . . 704.00 FEATURES: National heavy duty
    12 Ga. x 36", NATIONAL, No. NA3612, air, NEW
    $RFQ
    12 Ga. x 36", NATIONAL, No. NA3612, air, NEW
    OPTIONAL ACCESSORIES: 57" squaring arm, model NSA 36 . . . . . . . . . . . . . . . . . . . 704.00 FEATURES: National offers three heavy duty air shears with cast iron side frames, all steel cutter heads and
    10 Ga. x 80", BIRMINGHAM, No. H-8010, hydraulic, 5 HP, NEW
    $RFQ
    10 Ga. x 80", BIRMINGHAM, No. H-8010, hydraulic, 5 HP, NEW
    SPECIFICATIONS: Maximum cutting length 80" Maximum thickness--mild steel 10 gauge Maximum thickness--stainless steel 13 gauge Strokes per minute
    10 Ga. x 60", BIRMINGHAM, No. H-6010, hydraulic, 5 HP, NEW
    $RFQ
    10 Ga. x 60", BIRMINGHAM, No. H-6010, hydraulic, 5 HP, NEW
    SPECIFICATIONS: Maximum cutting length 60" Maximum thickness--mild steel 10 gauge Maximum thickness--stainless steel 13 gauge Strokes per minute
    18" x 22", MARVEL, Series 8 Mark III, tilting column, 1.25" blade, New
    $RFQ
    18" x 22", MARVEL, Series 8 Mark III, tilting column, 1.25" blade, New
    OPTIONAL ACCESSORIES: Powered column tilt, #M3M . . . . . . . . . . . . . . . . . . . . . $ 2,675.00 Second standard vise--complete, #E4 . . . . . . . . . . . . . . . . 820.00 In-bound freight to Miami, FL (stock
    10" x 16", WELLSAW, No. 1016, miter, manual (new)
    $RFQ
    10" x 16", WELLSAW, No. 1016, miter, manual (new)
    OPTIONAL ACCESSORIES: Infinitely variable band speed drive . . . . . . . . . . . . . . 737.00 Blade break / stall switch . . . . . . . . . . . . . . . . . . . 747.00 Powered vise (air power, manual control) .
    6' x .250, BENDMAK, #CYL-ST 190/20, 7.48" rolls, 15 fpm, 5.5 HP, NEW
    $RFQ
    6' x .250, BENDMAK, #CYL-ST 190/20, 7.48" rolls, 15 fpm, 5.5 HP, NEW
    STANDARD FEATURES: Top and pinch rolls driven via electric motor Forward and reverse rotation controlled by foot pedal Top rolls release for ease of part removal complete with electric interlock Powered adjustment
    5' x .282", BENDMAK, #CYL-ST 170/15, 6.69" rolls, 15 fpm, 5.5 HP, NEW
    $RFQ
    5' x .282", BENDMAK, #CYL-ST 170/15, 6.69" rolls, 15 fpm, 5.5 HP, NEW
    STANDARD FEATURES: Top and pinch rolls driven via electric motor Forward and reverse rotation controlled by foot pedal Top rolls release for ease of part removal complete with electric interlock Powered adjustment
    48" x 16 ga., NATIONAL, No. NR4816, powered, 3" rolls, 1 HP, New
    $RFQ
    48" x 16 ga., NATIONAL, No. NR4816, powered, 3" rolls, 1 HP, New
    OPTIONAL ACCESSORIES: Wire groove, 3/8", 1/2" or 5/8" . . . . . . . . . . . . . . . . . . $ 680.00 FEATURES: National's 3" power rolls are designed for simple operation. Standard with forward a
    3' x 9/32", EAGLE, No. A314-10/7, 5.9" rolls, 13 fpm, 6 HP, NEW
    $RFQ
    3' x 9/32", EAGLE, No. A314-10/7, 5.9" rolls, 13 fpm, 6 HP, NEW
    OPTIONAL ACCESSORIES: Cone bending device . . . . . . . . . . . . . . . . . . . . . . . . $ 700.00 Induction hardened rolls. . . . . . . . . . . . . . . . . . . . . . 880.00 Shaft extension for section bending r
    3' x 1/4", EAGLE, No. TSI 3/1, 5.35" rolls, 14 fpm, 4 HP, NEW
    $RFQ
    3' x 1/4", EAGLE, No. TSI 3/1, 5.35" rolls, 14 fpm, 4 HP, NEW
    TSI 3/1 STD, 3' x 1/4" equipped with cone device, extended shafts and oil tank full . . . . . . . . . . . . . . . . . . . $17,100.00 TSI 3/1 EXP, 3' x 1/4" equipped with mobile console with push buttons, co
    EAGLE, 2 1/4" X 2 1/4" X 1/4", CPS-50-REV, hydraulic, 3 rolls driven vari s
    $RFQ
    EAGLE, 2 1/4" X 2 1/4" X 1/4", CPS-50-REV, hydraulic, 3 rolls driven vari s
    OPTIONAL ACCESSORIES: Rolls for sch 40 pipe--2" . . . . . . . . . . . . . . . . . . . POR Inland freight from Stapleton, AL . . . . . . . . . . . . . . 800.00 Rolls for angle iron leg out/in . . . .
    BENDMAK, 4" x 4" x 3/8", PRO-100, hyd, 3 rolls driven, 15 HP, DP design, NE
    $RFQ
    BENDMAK, 4" x 4" x 3/8", PRO-100, hyd, 3 rolls driven, 15 HP, DP design, NE
    OPTIONAL ACCESSORIES: Digital readout indicating position of adjustment top roll. . . N/C Manually operated, four directional guide rolls including leg-in angle attachment. . . . . . . . . . . . . . . . . . $
    BENDMAK, 3" x 3" x 3/8", PRO-80, hyd, 3 rolls driven, 7.5. DP design, NEW
    $RFQ
    BENDMAK, 3" x 3" x 3/8", PRO-80, hyd, 3 rolls driven, 7.5. DP design, NEW
    OPTIONAL ACCESSORIES: Digital readout indicating position of adjustment top roll. . . N/C Manually operated, four directional guide rolls including leg-in angle attachment. . . . . . . . . . . . . . . . . . $
    BENDMAK, 2" x 2" x 1/4", PRO-60, hyd, 3 rolls driven, 5 HP, DP design, NEW
    $RFQ
    BENDMAK, 2" x 2" x 1/4", PRO-60, hyd, 3 rolls driven, 5 HP, DP design, NEW
    OPTIONAL ACCESSORIES: Digital readout indicating position of adjustment top roll. . . N/C Manually operated, four directional guide rolls including leg-in angle attachment. . . . . . . . . . . . . . . . . . $
    BENDMAK, 2" x 2" x 1/4", PRO-55, hyd, 3 rolls driven, 3 HP, DP design, NEW
    $RFQ
    BENDMAK, 2" x 2" x 1/4", PRO-55, hyd, 3 rolls driven, 3 HP, DP design, NEW
    OPTIONAL ACCESSORIES: Digital readout indicating position of adjustment top roll. . . N/C Manually operated, four directional guide rolls including leg-in angle attachment. . . . . . . . . . . . . . . . . . $
    BENDMAK, 2" x 2" x 3/16", PRO-50, hyd, 3 rolls driven, 3 HP motor, NEW
    $RFQ
    BENDMAK, 2" x 2" x 3/16", PRO-50, hyd, 3 rolls driven, 3 HP motor, NEW
    OPTIONAL ACCESSORIES: Digital readout indicating position of adjustment top roll. . . N/C TECHNICAL SPECIFICATIONS: Shaft diameters--top 2" (50mm) --lower 1.6&
    EDWARDS 60 Ton Ironworker, NEW
    $RFQ
    EDWARDS 60 Ton Ironworker, NEW
    OPTIONAL ACCCESSORIES: 5 HP, 3450 RPM motor wired for 220/1/60 operation . . . . . . . . . $ 300.00 5 HP, 3450 RPM motor wired for 440/3/60 electrics . . . . . . . . . 120.00 Auto cut. . . . . . . . . . . . . .
    42"X, 24"Y, 25.6"Z, KASUGA, Q-1000VS, #50, 40 ATC, 30 HP, 12K, Fanuc 18iMB,
    $RFQ
    42"X, 24"Y, 25.6"Z, KASUGA, Q-1000VS, #50, 40 ATC, 30 HP, 12K, Fanuc 18iMB,
    Model number Quantum Q-1000VS Year of manufacture 2001 SPECIFICATIONS: Table size 55" X 23.6" Maximum long. X-axis
    SUMMIT 30-6 x 120" Engine Lathe, NEW
    $RFQ
    SUMMIT 30-6 x 120" Engine Lathe, NEW
    STANDARD ACCESSORIES: Thread dial, Steady rest, Follow rest, Coolant, Taper attachment, 16" dia. 3 jaw chuck with top two piece jaws, 20" dia. 4 jaw chuck with solid reversible jaws, Four (4) way rapid tra
    ACER 29" Series Lathes
    $RFQ
    ACER 29" Series Lathes
    Dynamic 2960G. . . $ 33,100.00 Dynamic 29120G $ 38,100.00 Dynamic 2980G. . . $ 34,900.00 Dynamic 29160G $ 42,300.00 OPTIONAL ACCESSORIES: 24" 4 jaw independent chuck, D1-11, with back
    DEWALT, #DW758, 8" wheel, 1" wide, 3/4 HP, 3 phase, 3600 rpm, like new
    $RFQ
    DEWALT, #DW758, 8" wheel, 1" wide, 3/4 HP, 3 phase, 3600 rpm, like new
    Model number DW758 SPECIFICATIONS: Maximum wheel size (OD x bore x width) 8" x 5/8" x 1" Motor power 3/4 HP Motor speed
    35 Ton, ADIRA, No. QH-3020, upacting, 80"OA, Hurco CNC, 1985
    $RFQ
    35 Ton, ADIRA, No. QH-3020, upacting, 80"OA, Hurco CNC, 1985
    Model number QH-3020 Year of manufacture 1985 SPECIFICATIONS: Capacity at bottom stroke 35 tons Overall bending length 8
    14 Ga. x 10', GMC, #BB-1014-6HD, heavy duty box & pan brake with 6" box depth
    $RFQ
    14 Ga. x 10', GMC, #BB-1014-6HD, heavy duty box & pan brake with 6" box depth
    FEATURES: ISO 9002 certified Large 1-9/16" beam opening, adjustable 1" beam adjustment (front and back) Standard 2", 3", 4", 5" and 6" fingers Stop rods for repeat bends All steel
    10 Ga. x 4', BIRMINGHAM, No. VH-410-6, Hydraulic, 5 HP, New
    $RFQ
    10 Ga. x 4', BIRMINGHAM, No. VH-410-6, Hydraulic, 5 HP, New
    SPECIFICATIONS: Bending length 48" (1200mm) Gauge capacity--mild steel 10 ga. (3.2mm) --stainless steel 12 ga. (2.65mm) Bending angle range
    22 Ga. x 30", PEXTO, No. 100, bar folder
    $RFQ
    22 Ga. x 30", PEXTO, No. 100, bar folder
    SPECIFICATIONS: Folding length 30" Capacity, mild steel 22 ga.
    18 Ga. x 144", NATIONAL, No. N14418, hand brake, NEW
    $RFQ
    18 Ga. x 144", NATIONAL, No. N14418, hand brake, NEW
    FEATURES: National offers these hand brakes with a great deal of pride. A simple, utmost strength with a long life of dependable service. Streamline designed for fast, accurate bending--even for the inexperienced wor
    5 HP, SPEEDAIRE, #3Z492A, 70 gallon tank (horz)
    $RFQ
    5 HP, SPEEDAIRE, #3Z492A, 70 gallon tank (horz)
    Model number 3Z492A SPECIFICATIONS: Tank size, horizontal 70 gallons Mian motor 5 HP Motor speed
    3 HP, SPEEDAIRE, #3Z492A, 55 gallon tank (horz)
    $RFQ
    3 HP, SPEEDAIRE, #3Z492A, 55 gallon tank (horz)
    Model number 3Z492A SPECIFICATIONS: Tank size, horizontal 55 gallons Mian motor 3 HP Motor speed
    2.5 HP, SPEEDAIRE, max. pressure 135 psi, 20 gallon tank (horizontal), #L2/1/99
    $RFQ
    2.5 HP, SPEEDAIRE, max. pressure 135 psi, 20 gallon tank (horizontal), #L2/1/99
    SPECIFICATIONS: Tank size, horizontal 20 gallons Mian motor 2.5 HP Air volume @ 90 psi 5.5 scfm Air volume @ 135 psi
    Trojan Radial Arm Drill Press
    $6,500
    Trojan Radial Arm Drill Press
    Trojan Radial Arm Drill Press This radial arm drill press is in excellent condition. It basically is in unused condition except to learn the machine. We need the space and aren’t doing plate work so it’s a dust collecto
    • Arm length: 4'
    • Column diameter: 9"
      #0 National 0-500 Automated Flat Die Thread Roller
      $RFQ
      #0 National 0-500 Automated Flat Die Thread Roller
      No description providedDiameter.086" - .190" Production250 - 500 PPM Maximum Thread Length2-1/2" Maximum Shank Length3" Approx. Weight2,800 lbs Approx. Floor Size69" L x 56" W
      • Maximum workpiece diameter: 0.187"
      • Maximum workpiece diameter: 0.187"
      • Maximum thread length: 2.5"
        JET J-8201K Metal/Wood Vertical Bandsaw
        $RFQ
        JET J-8201K Metal/Wood Vertical Bandsaw
        CALL 386-304-3720 FOR AVAILABILITY FEATURES: The line of JET Metal/Wood Vertical Bandsaws offers machine and fabrication professionals all the power and precision in a package that meets their individual specific
        • Throat capacity: 13.5"
        • Height capacity: 44"
          20” Rockford Hydraulic Slotter, Model SA, S/N 105 SA 88,
          $13,500
          20” Rockford Hydraulic Slotter, Model SA, S/N 105 SA 88,
          20” Rockford Hydraulic Slotter, Model SA, S/N 105 SA 88, New 1957. Machine Specs: Stroke Min 3” Stroke Max 22” Adjustment of Ram 0 - 10 Degrees Cutting Speeds 25 - 100 FPM Travels Long 26” Cross 26”
          O.K. Tool Radius/ Ball Nose Grinder
          $5,450
          O.K. Tool Radius/ Ball Nose Grinder
          Specifications: Max Length of Flute with Standard Machine: 4 1/2" Max Mill Diameter Over Table: 9 1/2" (with #9 B&S Spindle) Max Mill Diameter in Front of Table: 12" (with #9 B&S Spindle)
          Baird #2 Fourslide
          $RFQ
          Baird #2 Fourslide
          No description providedBasic Wire Diameter1/8" Maximum Strip Width1" Standard Feed Length8" Stroke Per Minute67-200 Motor2 HP With Straightener<br />E-Manual Ava
          Sellers 6GA Drill Grinder
          $2,750
          Sellers 6GA Drill Grinder
          S/N: 62R1050 Specifications: Capacity: 5/16" x 3" Grinding Wheel: 10" Motor: 2 HP 220/440V/3Ph/60Hz Approx weight: 1175 Lbs
          Baird 3-24 Fourslide
          $RFQ
          Baird 3-24 Fourslide
          No description providedMaximum Wire Diameter3/16" Maximum Width Coil Stock1-1/8" Maximum Feed Length24" Strokes Per Minute30 - 90 Front Slide Stroke3" Side Slide Stroke4-1/2" Rear Slide Stroke3" Vertical Motion15/16" Ope
          4" Landis Stationary Die Head Pipe Threading Machine
          $RFQ
          4" Landis Stationary Die Head Pipe Threading Machine
          S/N: Type 4-203-4 Specifications: Die Head 2 1/2" - 4" Capacity Fast Action Front Chuck Rear Chuck Coolant Cut Off Tool Beveling Tool 5 HP 220/440 V
          Categories:
          Condition:
          Manufacturer:
          Location:
          Price:
          •  to 
          <Prev | 131 | 132 | 133 | 134 | 135 | 136 | 137 | 138 | 139 | 140 | Next>