buy & sell, new & used machinery, machine tools & equipment

<Prev | 123 | 124 | 125 | 126 | 127 | 128 | 129 | 130 | 131 | 132 | Next>
Refine: Viewing 13001 - 13100 of 20816 matches
Sort by:
Items Per Page:  20 |  50 |  100
SHUSTER 600V WIRE STRAIGHTENER
$RFQ
SHUSTER 600V WIRE STRAIGHTENER
MODEL: 600V MACHINE CAPACITY: 3/32" MILD STEEL TO .192" SPRING WIRE STOCK FEED: 20 TO 200 FPM (1) STRAIGHTENING HEAD NO MATERIAL INFEED STRAIGHTER APPROX. CUT LENGTH: 40" MAXIMUM (ADJUSTABLE) CUT-OFF
Salvagnini P4 Panel Bender
$RFQ
Salvagnini P4 Panel Bender
MODEL: P4 YEAR: 1995 MAXIMUM LENGTH OF INCOMING SHEET: 98" MAXIMUM WIDTH OF INCOMING SHEET: 59.1" MAX. DIAGONAL THAT CAN BE ROTATED: 98.4" MAXIMUM BEND LENGTH: 88.6" MAXIMUM BEND HEIGHT: 8"
REGAL Model 10,000-24 SRNP COIL REEL
$RFQ
REGAL Model 10,000-24 SRNP COIL REEL
MODEL: MODEL 10,000-24 SRNP CAPACITY 10,000 LBS. WIDTH CAPACITY 24" ADJUSTABLE I.D. 20" TO 24" MAX. O.D. 60" EQUIPPED WITH: PNEUMATIC EXPANSION AIR BRAKE NO KEEPERS CONDITION: GOOD.
Drawer slide
$1
Drawer slide
Undermount drawer slides; various sizes from 10" - 15"
7-1/2" x 24T Carbide tipped saw blade by Irwin
$10
7-1/2" x 24T Carbide tipped saw blade by Irwin
7-1/2" x 24T Carbide tipped saw blade by Irwin. Price per each.
Electrician's Step Drill Bit; 3/4" to 1-3/8" by 16ths
$50
Electrician's Step Drill Bit; 3/4" to 1-3/8" by 16ths
MK Morse Electrician's Step Drill Bit; 3/4" to 1-3/8" by 16ths.
Motor Cover for PM2000 table saw
$58
Motor Cover for PM2000 table saw
Motor Cover for PM2000 table saw
Dust Connection for Delta 2000 Contractor's Saw
$34
Dust Connection for Delta 2000 Contractor's Saw
Dust Connection for Delta 2000 Contractor's Saw
REED Model 462 PLATE ROLL
$RFQ
REED Model 462 PLATE ROLL
MODEL 462 5' X 14 GA REED INITIAL-TYPE PLATE BENDING ROLL EQUIPPED WITH: AIR DROP END MANUAL REAR-ROLL ADJUSTMENT MANUAL BOTTOM-ROLL ADJUSTMENT TOP-ROLL DIAMETER 4.25" BOTTOM-ROL
Mori Seiki NLX-2500SY LATHE
$RFQ
Mori Seiki NLX-2500SY LATHE
CAPACITY: SWING / SWING OVER CROSS SLIDE 36.37" / 29.72" MAXIMUM TURNING DIAMETER / MAXIMUM TURNING LENGTH 14.01" / 27.75" DISTANCE BETWEEN CENTERS 20" MAIN SPINDLE: SPINDLE SPEEDS MINIMUM - M
Max-O 612 Surface Grinder
$RFQ
Max-O 612 Surface Grinder
MODEL: 612 SPECIFICATIONS WIDTH & LENGTH GROUND 6" X 12" LONGITUDINAL TRAVEL 12-3/4" CROSS FEED TRAVEL 6-3/4" VERT. WORK. HGHT UNDER 7" WHEEL 12" MAXIMUM GRINDING WHEEL DIAMETER 8&
Madision 1748 Surface Grinder
$RFQ
Madision 1748 Surface Grinder
MODEL: 1748 SPECIFICATIONS TABLE SIZE 16" X 48" LONGITUDINAL TABLE TRAVEL 50" CROSS SADDLE TRAVEL 18" MAX VERTICAL CLEARANCE UNDER WHEEL 24" TABLE SPEEDS (VARIABLE) TO 125 FPM CROSS FEED
JM Montgomery Model 7216 PLATE ROLL
$RFQ
JM Montgomery Model 7216 PLATE ROLL
MODEL: MODEL 7216 JM MONTGOMERY 6' X 16GA CAPACITY 72" X 16 GA, 3 ROLLS POWER DRIVEN, MANUAL RATCHET ADJUSTMENTS ON BOTTOM 2 ROLLS FRONT/BACK ON BOTH ENDS, GROOVES ON ALL 3 ROLLS 1/4" - 3/8" - 1/2
J.M. MONTGOMERY MDL 72-16 PINCH PINCH ROLL
$RFQ
J.M. MONTGOMERY MDL 72-16 PINCH PINCH ROLL
MODEL: MDL 72-16 PINCH YEAR: 1999 J.M. MONTGOMERY RATED CAPACITY,,,,,,,,,,,6' X 16 GA DIAMETER ROLLS,,,,,,,,,,, 3" HYDRAULIC DRIVE HYDRAULIC DROP END HYDRAULIC POWER ADJUSTMENT OF REAR BENDING ROLL MOTO
Heller EH-320D Bending Roll
$RFQ
Heller EH-320D Bending Roll
MODEL: EH-320D YEAR: 1996 HYDRAULIC (4) ROLL PLATE BENDING ROLL MATERIAL CAPACITY: 3/4" (MILD STEEL) OVERALL LENGTH OF ROLLS: 120" PRE BEND: 5/8" TOP ROLL DIAMETER: 13.78" CENTER ROLL DIAMETER:
Haas VF-3 Vertical Machining Center
$RFQ
Haas VF-3 Vertical Machining Center
MODEL: VF-3 TABLE SIZE 48"X18" TRAVELS X-AXIS 40" Y-AXIS 20" HEAD TRAVEL Z-AXIS 25" SPINDLE SPEED 7500 RPM SPINDLE TAPER #40 TOOL CHANGER 20 ATC DIMENSIONS 8'X8'X8.5' WEIGHT
FARMHAM 2015-EXXXX STRECH FORMING ROLL
$RFQ
FARMHAM 2015-EXXXX STRECH FORMING ROLL
60,000 P.S.I. ROLL DIAMETER: TOP ROLL . 2-11/16” BOTTOM ROLL 3-5/16” TOP ROLL LIFT MOTORS GEARED MOTOR TO SCREW LOCATED ON EACH END. WITH MANUAL OVERRIDE ADJUSTMENT MECHANICAL COUNTER FOR EACH END OF TOP ROLL BO
C&G CHALLANGER OXY PLASMA CUTTER
$RFQ
C&G CHALLANGER OXY PLASMA CUTTER
YEAR: 2000 SPECIFICATIONS ONE OXY-FUEL TORCH, ONE PLASMA TORCH WORK CUTTING CAPACITY: 10' X 30' MACHINE FOOTPRINT - 13'-6" X 39'-0" TRACK - 39' WATER TABLE - 11'-0" X 30'
BENCHMASTER 910 STRAIGHTENER 10 1/2''
$RFQ
BENCHMASTER 910 STRAIGHTENER 10 1/2''
MODEL: 910 SERIAL: 24839 BENCHMASTER 910 STRAIGHTENER 10 1/2'' CAPACITY: 10 1/2'' WIDE 7 ROLL ELECTRIC: 3/60/44
AMERECON INITIAL PINCH PLATE ROLLS
$RFQ
AMERECON INITIAL PINCH PLATE ROLLS
YEAR: 1999 1/4" X 5' AMERECON INITIAL PINCH PLATE ROLLS W/ POWER RR ADJUST SPECIFICATIONS: CAPACITY 5' X 1/4" MILD STEEL ROLL DIAMETER 6.7" ON ALL 3 ROLLS SPEED 12.5 F.P.M MAIN DRIVE MOTOR
AMADA TOGU III Tool sharpener
$RFQ
AMADA TOGU III Tool sharpener
SPECIFICATIONS: MODEL: TOGU III YEAR: 2000 SPECIFICATIONS MAXIMUM GRINDING AMOUNT: 0.099" MAXIMUM/MINIMUM TOOL DIAMETER: 6.299 (TYPE E, 4.5" DIE) 0.059" MAXIMUM/MINIMUM TOOL HEIGHT: 5.906"
Amada MP-1012 Loader
$RFQ
Amada MP-1012 Loader
SPECIFICATIONS: MODEL: MP-1012 LOADER 40" X 50" SHEET SIZE
AMADA CSW-250 CORNER NOTCHER
$RFQ
AMADA CSW-250 CORNER NOTCHER
MODEL: CSW-250 YEAR: 1988 DESCRIPTION MAX SHEET THICKNESS .125" MILD STEEL NOTCHING DIMENSIONS 9.84 X 9.84 (250 X250MM) STROKE LENGTH .94 (24MM) STROKE PER MINUTE 42 MAX TONNAGE 10 (11) WEIGHT
AMADA CSW-220 NOTCHER /COPING MACHINE COMBO
$RFQ
AMADA CSW-220 NOTCHER /COPING MACHINE COMBO
MODEL: CSW-220 AMADA CSW-220 8 5/8” X 8 5/8” HYDRAULIC CORNER NOTCHER / 2” X 4” COPING NOTCHER COMBO STRI CAPCITY, A 4” X 2” COPING C MAX NOTCHING SIZE 8-5/8” X 8-5/8”.
4 PRE 7 ROLL STRAIGHTENER
$RFQ
4 PRE 7 ROLL STRAIGHTENER
4 PRE FEEDER NS 25 WHIT 7ROLL STRAIGHTENER, MOUNTIN​G BRACKET AND LEG STAND LOW USE STROKE 1 EACH 6"-8"-12"-24"
Aida THX-L2-600-370-185 SSDC Press
$RFQ
Aida THX-L2-600-370-185 SSDC Press
SPECIFICATIONS: MODEL: THX-L2-600-370-185 YEAR: 1988 660 TON AIDA LINK DRIVE STRAIGHT SIDE PRESS 16″ STROKE 48.3″ SHUT HEIGHT 15.98″ POWER RAM ADJUSTMENT 20-45 SPM 145.6″ X 72.8″ BED AND RAM AREA 27.55″ THICK RO
Bystronic BYSMALL 2512-2 LASER
$RFQ
Bystronic BYSMALL 2512-2 LASER
SPECIFICATIONS: MODEL: BYSMALL 2512-2 YEAR: 1994 RESONATOR WATTAGE: 1500 MAXIMUM SHEET SIZE: 4X8 DUST COLLECTOR LOADER UNDER POWER
4' X 13-3/4" H. CEGIELSKI (TOOLMEX) MODEL #WRA40 RADIAL ARM DRILL
$RFQ
4' X 13-3/4" H. CEGIELSKI (TOOLMEX) MODEL #WRA40 RADIAL ARM DRILL
4' X 13-3/4" H. CEGIELSKI (TOOLMEX) MODEL #WRA40 RADIAL ARM DRILL MODEL WRA40/1.25 MANUFACTURED 1978 RACO Stock Number R018001 LENGTH OF ARM ------------------------------- 48" DIAMETER OF COLUMN ---
  • Arm length: 4'
  • Column diameter: 13.75"
    40.15" x 236.22" Microcut CNC Lathe
    $RFQ
    40.15" x 236.22" Microcut CNC Lathe
    Reference #24725 40.15" x 236.22" Microcut CNC Lathe FEATURES: Fanuc 0iTF CNC Control with 10.4" LCD and Manual Guide i Baruffaldi TB-200 VDI50/8T 8 Pos. Front Mounted Turret 1.96" to 11.81&qu
    • Swing: 40.15"
    • Centers: 236.22"
      5.12" Microcut CNC T-Type Horizontal Boring Mill
      $RFQ
      5.12" Microcut CNC T-Type Horizontal Boring Mill
      Reference #21897 5.12" Microcut CNC T-Type Horizontal Boring Mill Age: New 2015 Model: HBM-5T FANUC 31imB CNC Control 60 Station Automatic Tool Changer Spindle Diameter....................... 5.12&
      • Spindle diameter: 5.12"
      • X axis travel: 137.79"
        5.12" Microcut CNC T-Type Horizontal Boring Mill
        $RFQ
        5.12" Microcut CNC T-Type Horizontal Boring Mill
        Reference #21985 5.12" Microcut CNC T-Type Horizontal Boring Mill Age: New Model: HBM-4T Fanuc 31i MB CNC Control 60 Station ATC Spindle Diameter....................... 5.12" Spindle Taper......
        • Spindle diameter: 5.12"
        • X axis travel: 118.11"
          4.33" Microcut HBM-4 CNC Table Type Horizontal Boring Mill
          $RFQ
          4.33" Microcut HBM-4 CNC Table Type Horizontal Boring Mill
          Reference #24723 Microcut 4.33" CNC Table Type Horizontal Boring Mill FEATURES: Fanuc 31i MB CNC Control Through Spindle Coolant 60 Station Automatic Tool Changer CAPACITY: Spindle Diameter.............
          • Spindle diameter: 4.33"
          • X axis travel: 86.61"
            Di-Acra/Strippit Hydra Power #17T-14-98-2 Press Brake
            $3,295
            Di-Acra/Strippit Hydra Power #17T-14-98-2 Press Brake
            Year: 1998? Make: Di-Acra/strippit Model: hydra power # 17T-14-98-2 Condition: Good Electrical: 460/3Phase Serial #: On Request Machine Status: Can be powered up Shipping Info: We can load Weight: 1500 Dimensi
            • Tonnage: 17T
              10 A Used Jones & Lamson Saddle TypeTurret Lathe
              $RFQ
              10 A Used Jones & Lamson Saddle TypeTurret Lathe
              Swing Over Bed Ways 32" Swing Over Cross Slide Carriage 22" Center Distance 70" Spindle Hole 6-1/2" Spindle Speeds 12 To 600 Rpm's Spindle Nose A-11 Chuck Size 18" 3- Jaw With 2 Piece J
              5 A Used Warner & Swasey Square Head Saddle TypeTurret Lathe
              $RFQ
              5 A Used Warner & Swasey Square Head Saddle TypeTurret Lathe
              Swing Over Bed Ways 36" Center Distance 108" Swing Over Cross Slide Carriage 32-3/4" Spindle Hole 12-1/2" Spindle Speeds 10 To 281 Rpm's Spindle Nose A-20 Chuck Size 32" 4 Jaw Feeds Cr
              4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              $RFQ
              4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              Swing Over Ways 28-1/4" Swing Over Cross Slide Carriage 22" Spindle Hole 12-1/2 Center Distance 62" Spindle Speeds 20 To 526 Rpm's Spindle Nose A-15 Chuck Size (New Heavy Duty) 24" 4 Jaw New
              4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              $RFQ
              4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              Swing Over Bed Ways 28-1/4" Swing Over Cross Slide Carriage 22" Spindle Hole 12-1/2 Center Distance 62" Spindle Speeds 20 To 526 Rpm's Spindle Nose A-15 Chuck Size (New Heavy Duty) 24" 4 Jaw
              4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              $RFQ
              4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              Swing Over Bed Ways 28-1/4" Swing Over Cross Slide Carriage 22" Spindle Hole 12-1/2" Center Distance 144" Spindle Speeds 10 To 526 Rpm's Spindle Nose A-20 Chuck Size With 12-1/2" Thru H
              4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              $RFQ
              4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              Swing Over Bed Ways 28-1/4" Swing Over Cross Slide Carriage 22" Center Distance 62" Spindle Hole 9-1/4" Spindle Speeds 20 To 526 Rpm's Spindle Nose A-15 Chuck Size (New Heavy Duty) 24"
              Pacific Hydraulic Shear 3/8 x 16 ft
              $28,000
              Pacific Hydraulic Shear 3/8 x 16 ft
              Pacific Hydraulic Shear 3/8 x 16 ft Model 375R16 Serial S10584 Unit was in good operating shape when removed from service We can load on your truck at our warehouse Feel free to call with any questions
              4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              $RFQ
              4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              Swing Over Bed Ways 28-1/4" Swing Over Cross Slide Carriage 22" Center Distance 62" Spindle Hole 9-1/4" Spindle Speeds 20 To 526 Rpm's Spindle Nose A-15 Chuck Size (New Heavy Duty) 24"
              4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              $RFQ
              4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              Swing Over Bed Ways 28-1/4" Swing Over Cross Slide Carriage 22" Spindle Hole 9-1/4" Center Distance 62" Spindle Speeds 20 To 526 Rpm's Spindle Nose A-15 Chuck Size (New Heavy Duty) 24"
              4 A Used Warner & Swasey Lever Head Saddle Type Turret Lathe
              $RFQ
              4 A Used Warner & Swasey Lever Head Saddle Type Turret Lathe
              Swing Over Bed Ways 28-1/4" Swing Over Cross Slide Carriage 22" Center Distance 62" Spindle Hole 12-1/4" Spindle Speeds 10 To 210 Rpm's Spindle Nose A-20 Chuck Size 28" 3-Jaw Feeds Cro
              3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              $RFQ
              3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              Swing Over Bed Ways 23-1/2" Swing Over Cross Slide Carriage 18" Center Distance 43" Spindle Hole 6-1/4" Spindle Speeds 12 To 851Rpm's Spindle Nose A-15 Chuck Size New Gator 21" 4- Jaw
              3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              $RFQ
              3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              Swing Over Bed Ways 23-1/2" Swing Over Cross Slide Carriage 18" Center Distance 43" Spindle Hole 6-1/4" Spindle Speeds 24 To 851 Rpm's Spindle Nose A-15 Chuck Size No Feeds Cross .0025 To .
              3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              $RFQ
              3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              Swing Over Bed Ways 23-1/2" Swing Over Cross Slide Carriage 18" Center Distance 43" Spindle Hole 4-3/4" Spindle Speeds 12 To 851 Rpm's Spindle Nose A-11 Chuck Size (Not Pictured) 21" 4
              3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              $RFQ
              3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              Swing Over Bed Ways 23-1/2" Swing Over Cross Slide Carriage 18" Center Distance 43" Spindle Hole 6-1/4" Spindle Speeds 24 To 851Rpm's Spindle Nose A-15 Chuck Size 21" 3-Jaw Feeds Cross
              3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              $RFQ
              3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              Swing Over Bed Ways 23-1/2" Swing Over Cross Slide Carriage 18" Center Distance 43" Spindle Hole 6-1/4" Spindle Speeds 24 To 851Rpm's Spindle Nose A-15 Chuck Size ( New Heavy Duty) 20"
              3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              $RFQ
              3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              Swing Over Bed Ways 23-1/2" Swing Over Cross Slide Carriage 18" Center Distance 43" Spindle Hole 6-1/4" Spindle Speeds 24 To 851 Rpm's Spindle Nose A-15 Chuck Size 21" 4-Jaw New Feeds
              3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              $RFQ
              3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
              Swing Over Bed Ways 23-1/2" Swing Over Cross Slide Carriage 18" Center Distance 43" Spindle Hole 4-3/4" Spindle Speeds 12 To 829 Rpm's Spindle Nose A-15 Chuck Size 21" 3 - Jaw Feeds Cr
              34" X 100" Used Broadbent Hollow Spindle Engine Lathe
              $RFQ
              34" X 100" Used Broadbent Hollow Spindle Engine Lathe
              Swing Over Bed Ways 34" Swing Over Cross Slide 20" Bedway Width 24" Center Distance 100" Spindle Hole 16" Spindle Speeds 4 To 350 Rpm's Spindle Nose Chuck Size With 16-1/4" Hole
              40" X 204" Used Monarch Engine Lathe
              $RFQ
              40" X 204" Used Monarch Engine Lathe
              Swing Over Bed Ways 40.5 Swing Over Cross Slide 24" Spindle Hole 2-1/4" Center Distance 204" Spindle Speeds 10 To 505 Rpm's Spindle Nose D1-11 Chuck Size 32" 4 Jaws Feeds .006 To .363 Thre
              80" Dorries VCE 180 CNC Vertical Boring Mill
              $RFQ
              80" Dorries VCE 180 CNC Vertical Boring Mill
              Reference #25307 80" Dorries VCE 180 CNC Vertical Boring Mill Model: VCE 180 Age: 1986/2005 FEATURES: Complete Renovation and Retrofit in 2005 Siemens 840 C CNC Control Live Spindle C-Axis Table
              • Swing: 86.6"
                Cat 247B track skid loader
                $23,675
                Cat 247B track skid loader
                Here is a 2005 track machine with low 1446 hrs , has like new tracks and the overall machine is in really good condition please contact Joe at 330-473-8955 for more info
                23" X 168" Used Leblond Engine Lathe
                $RFQ
                23" X 168" Used Leblond Engine Lathe
                Swing Over Bed Ways 23" Swing Over Cross Slide 15" Center Distance 168" Spindle Hole 2-1/8" Spindle Speeds 12 To 528 Rpm's Chuck Size Front And Rear 21" 4 Jaw Feeds .004 To .500 Thread
                20" X 100" Used American Pacemaker Engine Lathe
                $RFQ
                20" X 100" Used American Pacemaker Engine Lathe
                Swing Over Bed Ways 30" Swing Over Cross Slide 20" Compound Travel 4" Carriage Length On Bed 26-3/4" Center Distance 100" Spindle Hole 2" Spindle Speeds (27) 26 To 1,600 Rpm's Spi
                Used Magerle Tool & Cutter Grinder
                $RFQ
                Used Magerle Tool & Cutter Grinder
                T-Slotted Table Size 4" X 26" Table Swivel Right To Left Of O 15 Degrees Table Travel 8 Grinding Spindle Cross Travel 10" Grinding Spindle Up & Down 11" Grinding Spindle Speeds 100 To5,600 Rp
                16" X 48" Used Grand Rapids Automatic Horizontal Surface Grinder
                $RFQ
                16" X 48" Used Grand Rapids Automatic Horizontal Surface Grinder
                Table Size 17-3/4" X 59-1/2" Magnetic Chuck Size 16" X 48" Longitudinal 59-1/2' Cross Travel 17-3/4' Vertical Movement Of Wheel Head 19" Vertical Working Height With 14" Wheel 1
                Used Southbend Ibrarmia Geared Head Drill
                $RFQ
                Used Southbend Ibrarmia Geared Head Drill
                Table Size 26" X 31" Vertical Travel Of Table 24" Spindle Travel 10.25" Spindle Taper #5 Morse Spindle Speeds 62 To 1,120 Rpm's Spindle Feeds .0039 To .0236 IPR. Center Of Spindle To Box Col
                52" Used King Vertical Turret Lathe
                $RFQ
                52" Used King Vertical Turret Lathe
                Specification Description Face Plate Size 52" Boring Mill Jaws 4 (Not Pictured) Swing Side Head Above Table 47.5" Height Under Rail 44" Cross Rail Travel 25" Table Speed 3 To 96 Rpm's Feeds
                24 HP QUINCY AIR COOLED 2 STAGE, 4 CYL. PRESSURE LUBRICATED AIR COMPRESSOR
                $RFQ
                24 HP QUINCY AIR COOLED 2 STAGE, 4 CYL. PRESSURE LUBRICATED AIR COMPRESSOR
                24 HP QUINCY AIR COOLED 2 STAGE, 4 CYLINDER PRESSURE LUBRICATED AIR COMPRESSOR MANUFACTURED 1986 RACO Stock Number R018016 MAXIMUM OPERATING PRESSURE ---------------- 200 PSI NUMBER OF STAGES --------------------
                24" x 24" x 24" GRIEVE ELECTRIC UNIVERSAL BATCH OVEN WITH ST
                $RFQ
                24" x 24" x 24" GRIEVE ELECTRIC UNIVERSAL BATCH OVEN WITH ST
                24" x 24" x 24" GRIEVE ELECTRIC UNIVERSAL BATCH OVEN WITH STAND MODEL AA 550 MANUFACTURED 2011 RACO Stock Number R018004 TEMPERATURE RANGE UP TO ------------------ 550 DEG.F. EFFECTIVE WORKING DIME
                • Chamber width: 24"
                • Chamber length: 24"
                  30 TON USM TRAVELLING HEAD DIE CUTTING PRESS, SERIES GTH MODEL 2065
                  $RFQ
                  30 TON USM TRAVELLING HEAD DIE CUTTING PRESS, SERIES GTH MODEL 2065
                  30 TON USM TRAVELLING HEAD DIE CUTTING PRESS SERIES GTH MODEL 2065 MANUFACTURED 1996 RACO Stock Number R018010 CUTTING FORCE ----------------------------------- 30 TONS DISTANCE BETWEEN HOUSINGS -----------------
                  • Tonnage: 30T
                  • Stroke: 2"
                    TIMESAVER MODEL 137-1 HDMW BELT GRINDER
                    $RFQ
                    TIMESAVER MODEL 137-1 HDMW BELT GRINDER
                    TIMESAVER MODEL 137-1 HDMW BELT GRINDER MANUFACTURED 1995 RACO Stock Number R018009 GRINDING WIDTH ---------------------------- 37" FEED SPEED ---------------------------------- 15 TO 45 FPM ABRASIVE BELT SP
                    • Belt width: 36"
                      MAZAK AJV-32/404 DOUBLE COLUMN BRIDGE TYPE VERTICAL MACHINING CENTER
                      $RFQ
                      MAZAK AJV-32/404 DOUBLE COLUMN BRIDGE TYPE VERTICAL MACHINING CENTER
                      MAZAK AJV-32/404 DOUBLE COLUMN BRIDGE TYPE VERTICAL MACHINING CENTER MANUFACTURED 1989 RACO Stock Number R080137 TABLE SIZE --------------------------------- 25.9" X 48.5" X-AXIS TRAVEL -----------------
                      • X axis: 39.37"
                      • Y axis: 27.56"
                        36" Used King Vertical Turret Lathe
                        $RFQ
                        36" Used King Vertical Turret Lathe
                        Table Size 36" 3-Jaw Swing Side Head Above Table 40" Swing Side Head Below Table 42" Height Under Rail 30" Table Speed 8.2 To 245 Rpm's Feeds .003 To .125 I.P.R. Fines Regular .10 To .500 I.
                        36" Used Bullard (Cut Master ) Vertical Turret Lathe
                        $RFQ
                        36" Used Bullard (Cut Master ) Vertical Turret Lathe
                        Face Plate 36" Boring Mill Jaws 4 New Swing Side Head Above Table 36" Height Under Rail 30" Swing Side Head Below Table 38" Table Speed 4.9 TO 180 Rpm's Feeds .004 To .500 I.P.R. Feeds .003
                        46" Bullard Dyna-Au-Tape CNC Vertical Boring Mill
                        $RFQ
                        46" Bullard Dyna-Au-Tape CNC Vertical Boring Mill
                        Specification Description Retro - Fitted Fanuc 16 T Table Size 46" Maximum Swing 58" Maximum Height Under Ram 54" Ram Stroke 46" Table Speeds Low 0 To 100 Rpm's Table Speeds High 0 To
                        LEWIS MACHINE WIRE STRAIGHTENER R
                        $RFQ
                        LEWIS MACHINE WIRE STRAIGHTENER R
                        WEIGHT ....................... 420 LBS. O.A. DIM. ................... 28" X 23" X 38" EQUIPPED WITH MOUNTED CONTROLS
                        LEWIS 7D STRAIGHT AND CUT
                        $RFQ
                        LEWIS 7D STRAIGHT AND CUT
                        LEWIS 7D STRAIGHTEN AND CUT Manufacturer: LEWIS Model: 7D S/N: 146 Condition: GOOD Specifications: WIRE DIAMETER RANGE .062" - .187" (1/16" - 3/16" MAX LENGTH 8' SPEED RANGE 105 FPM
                        FASTENER ENGINEERS STRAIGHTENER / FEEDER
                        $RFQ
                        FASTENER ENGINEERS STRAIGHTENER / FEEDER
                        CAPACITY ................... 5/8" - 1" DIA. JOG SPEED .................. 10 FPM FEED ROLL DIA. ............. 8" STRAIGHTENER ROLL DIA. ..... 7" WEIGHT ..................... 6675 LBS. O.A. DIM
                        TORRINGTON No. W-11 COIL SPRING WINDER
                        $RFQ
                        TORRINGTON No. W-11 COIL SPRING WINDER
                        WIRE DIA............................ .015" - .072" LENGTH ............................. 0" - 42" COIL I.D. .......................... 1" WEIGHT ............................. 1,045 LBS/
                        TORIN No. W-11 COIL SPRING WINDER
                        $RFQ
                        TORIN No. W-11 COIL SPRING WINDER
                        WIRE DIAMETER ..................... .0317" - .112" COIL O.D. ......................... 5/32" - 2-1/8" WIRE LENGTH PER SPRING: STANDARD ......................... 0" - 48" - .112" MAX
                        ADTECH MDL. GH-CNC50 COILING SPRING MACHINE
                        $RFQ
                        ADTECH MDL. GH-CNC50 COILING SPRING MACHINE
                        Technical Paremeters for 3-axis CNC Compression Spring Machine GH-CNC580: Model: GH-CNC580 Axes Number: 2 axes Wire Diameter: 3-8mm Max. Diameter: 150MM Max. Feeding Length: unlimited Max. Production Speed: 30p
                        US BAIRD PUNCH PRESS W/ CUTOFF DIE PALM BUTTONS
                        $RFQ
                        US BAIRD PUNCH PRESS W/ CUTOFF DIE PALM BUTTONS
                        #NAME?
                        US BAIRD FOUR SLIDE MACHINE
                        $RFQ
                        US BAIRD FOUR SLIDE MACHINE
                        #NAME?
                        US BAIRD FOUR SLIDE
                        $RFQ
                        US BAIRD FOUR SLIDE
                        -------------------------------------------------------------------------------
                        NILSON #S2F FOUR SLIDE MACHINE WITH PRESS ATTACHMENT
                        $RFQ
                        NILSON #S2F FOUR SLIDE MACHINE WITH PRESS ATTACHMENT
                        MACHINE No. ............ S2F MAXIMUM WIRE DIAMETER ............... 3/32" MAXIMUMWIDTH STRIP METAL ............ 1" STANDARD FEED LENGTH ................ 8" EQUIPPED WITH: PRESS ATTACHMENT 1 HP 4
                        BAIRD Model# 3-24 FOUR SLIDE MACHINE
                        $RFQ
                        BAIRD Model# 3-24 FOUR SLIDE MACHINE
                        MACHINE No. ............... 3-24 MAX DIA. STEEL WIRE ....... 3/16"+ STD. WIDTH RIBBON METAL ... 1-1/8"+ ROLL STRAIGHTENER ......... 4-14"+ MAX FEED W/ STOPS ......... 24" MAX FEED W/O STOPS ...
                        NILSON Mdl# 700L FOUR SLIDE WIRE FORMING MACHINE
                        $RFQ
                        NILSON Mdl# 700L FOUR SLIDE WIRE FORMING MACHINE
                        1/32" NILSON 700-L FOURSLIDE WIRE FORMING MACHINE, MFG. 1981 MANUFACTURER - NILSON MODEL - 700-L YEAR - 1981 WIRE DIAMETER - 1/32" MAX STRIP WIDTH - 3/4" STRAIGHTENER FEED LENGTH - 4" STROKE
                        BAIRD No. 3-24 FOUR SLIDE WIRE FORMIMG MACHINE
                        $RFQ
                        BAIRD No. 3-24 FOUR SLIDE WIRE FORMIMG MACHINE
                        MAX DIA. WIRE .................. 3/16" STAN. WIDTH RIBON METAL ........ 1-1/8" ROLL STRAIGHTENER .............. 4" MAX. FEED LENGTH USING STOPS ... 24" MAX. FEED WITHOUT STOPS ........ 26-1/2' MA
                        BAIRD Model# 2 FOUR SLIDE MACHINE
                        $RFQ
                        BAIRD Model# 2 FOUR SLIDE MACHINE
                        MACHINE No. ............... 2 MAX DIA. STEEL WIRE ....... 1/8" STD. WIDTH RIBBON METAL ... 1" ROLL STRAIGHTENER ......... 3-14" MAX FEED W/ STOPS ......... 8" MAX FEED W/O STOPS ........ 9-1/2&
                        RMG M# 1011-2566-73 WIRE DRAWER
                        $RFQ
                        RMG M# 1011-2566-73 WIRE DRAWER
                        CAPSTAN .................. 44" MAX. WIRE DIA. ........... .687" MAX/ A;;OY WIRE DIA. ..... .630" DRAW FORCE ............... 16,000 LBS. WEIGHT ................... 9535 LBS. O.A. DIM. ..............
                        48" VAUGHN SIZING BULL BLOCK
                        $RFQ
                        48" VAUGHN SIZING BULL BLOCK
                        PLEASE CALL OUR OFFICE FOR DETAILED INFORMATION AND PRICING IN THIS MACHINE -----------------------------------------------------------------------------
                        FASTENER ENGINEERS PF4000-08 PREFEED UNCOILER
                        $RFQ
                        FASTENER ENGINEERS PF4000-08 PREFEED UNCOILER
                        MANDREL ....................... 59" X 8" DIA. EQUIPPD WITH: MOUNTED CONTROLS FORWARD, REVERSING AND JOG 2 & 1-1/2 230/460 VOLTS 60 HZ 1740 RPM WEIGHT ........................ 3590 LBS, O.A. DIM.
                        10,000# SAMCO MDL #SU-10,000-DE DOUBLE END UNCOILER
                        $RFQ
                        10,000# SAMCO MDL #SU-10,000-DE DOUBLE END UNCOILER
                        Manufacturer - Samco Model - SU-10,000-DE Capacity - 10,000 Min. ID. 17.5" Max. ID. 20.5" Max. Coil Width 24" Max Coil OD. 60" Brake Air Mandrel Expansion Hydraulic Swivel Base MANDRELS
                        2" KUSAKABE TUBE CUTOFF
                        $RFQ
                        2" KUSAKABE TUBE CUTOFF
                        2" CAPACITY EQUIPPED WITH:- SWING ARM TYPE -SINGLE CUT TUBE GUIDE END STOP SNUBBER GUARDS DISC BRAKE LUBRICATOR MOTOR DC DRIVE WITH COOLING FAN O.D. 8'L X 76"W X 78"H
                        1-3/4" BERTOLETTE MODEL #315 TUBE CUTOFF MACHINE
                        $RFQ
                        1-3/4" BERTOLETTE MODEL #315 TUBE CUTOFF MACHINE
                        TUBE CAPACITY: 1/8" - 1-3/4" O.D. x .065" WALL MAXIMUM CAPACITY STAINLESS STEEL & INCALLOY TO 1/2" O.D. MAX FEED LENGTH IN ONE STROKE 36", UP TO 4 STROKES ROTARY CUT AND PULL ROTARY CUT
                        VAUGHN #2308 TUBE LEVEL WIND LINE
                        $RFQ
                        VAUGHN #2308 TUBE LEVEL WIND LINE
                        SPECIFICATIONS: MANUFACTURER: VAUGHN MACHINERY CORP TYPE: TUBE LEVEL WIND LINE CAPACITY: MAXIMUM TUBE O.D.: 5/8" (16mm) O.D. MINIMUM TUBE O.D.: 1/4" (6.35mm) O.D. LINE SPEED: 0 - 500 FPM (152 m/MIN.
                        POONGSAN TUBE LEVEL WIND LINE
                        $RFQ
                        POONGSAN TUBE LEVEL WIND LINE
                        YEAR: 1997 #4 MINIMUM TUBE OD ......................... 6mm MAXIMUM TUBE OD ......................... 22.2mm MINIMUM TUBE WALL ....................... 0.35mm MAXIMUM TUBE WALL ....................... 1.0mm
                        14mm SASPI Mdl# GV4 THREAD ROLLER
                        $RFQ
                        14mm SASPI Mdl# GV4 THREAD ROLLER
                        Min/Max Thread Diameter: 6-14mm (1/4"-9/16") Max Thread Length: 100mm (3-15/16") Max Length Blank: 120mm (4-3/4") Max Height under Head: 60mm (2-3/4") Speed: 65-80-130-160 ppm weight .... 5,
                        1/4" WATERBURY FARREL No. 10 WITH VIBRATORY BOWL FEEDER WITH STAND
                        $RFQ
                        1/4" WATERBURY FARREL No. 10 WITH VIBRATORY BOWL FEEDER WITH STAND
                        MAXUMUM WIRE DIAMETER ................. 0.25" MAXIMUM LENGTH OF THREAD .............. 2" PIECES ERP MINUTE ..................... 150 WEIGHT ................................ 3,295 LBS. O.A. DIM/ ..........
                        REED No. B111 THREAD ROLLER
                        $RFQ
                        REED No. B111 THREAD ROLLER
                        WORK DIAMETERS ......... INFEED TO 2" THRU FEED TO 3/4" THREAD LENGTHS ......... INFEED TO 1-7/8" THRU FEED NO LIMIT PRODUCTION RATES ....... IN FEED 8 - 35 PPM THRU FEED 450 PPM WEIGHT ...........
                        SHIMAZU M# SUPER 2F TWIN SPINDLE NUT TAPPER
                        $RFQ
                        SHIMAZU M# SUPER 2F TWIN SPINDLE NUT TAPPER
                        Shimazu Model Super 2 Twin Spindle Nut Tapper, Serial No 2191, 1990 #10-1/4" Product Range ( Tap Size) 170, 190 Pieces per Minute 185mm x 25mm R Bent Tap Hopper AC Motor and Control Weight 1500 Lbs.
                        SHIMAZU M# SUPER 4 TWIN SPINDLE NUT TAPPER
                        $RFQ
                        SHIMAZU M# SUPER 4 TWIN SPINDLE NUT TAPPER
                        Shimazu Model Super 4 Twin Spindle Nut Tapper 5/16"-1/2" Product Range ( Tap Size) 245mm x 30mm R Bent Tap 80-140 Pieces per Minute AC Motor and Controls Weight 2000 Lbs.
                        SHIMAZU M# 3F TWIN SPINDLE NUT TAPPER
                        $RFQ
                        SHIMAZU M# 3F TWIN SPINDLE NUT TAPPER
                        Shimazu Model 3F Twin Spindle Nut Tapper, Serial No 1422 3/16"-3/8" Product Range ( Tap Size) 80-100 Pieces per Minute 250mm x 30mm R Bent Tap Hopper AC Motor and Controls Weight 1500 Lbs.
                        SHIMAZU M# 3F TWIN SPINDLE NUT TAPPER
                        $RFQ
                        SHIMAZU M# 3F TWIN SPINDLE NUT TAPPER
                        Shimazu Model 3F Twin Spindle Nut Tapper, Serial No 1423 3/16"-3/8" Product Range ( Tap Size) 80-100 Pieces per Minute 250mm x 30mm R Bent Tap Hopper AC Motor and Controls Weight 1500 Lbs.
                        SHIMAZU M# 3F TWIN SPINDLE NUT TAPPER
                        $RFQ
                        SHIMAZU M# 3F TWIN SPINDLE NUT TAPPER
                        Shimazu Model 3F Twin Spindle Nut Tapper, Serial No 1419 3/16"-3/8" Product Range ( Tap Size) 80-100 Pieces per Minute 250mm x 30mm R Bent Tap Hopper AC Motor and Controls Weight 1500 Lbs.
                        SHIMAZU M# 3F TWIN SPINDLE NUT TAPPER
                        $RFQ
                        SHIMAZU M# 3F TWIN SPINDLE NUT TAPPER
                        Shimazu Model 3F Twin Spindle Nut Tapper, Serial No 1744 3/16"-3/8" Product Range ( Tap Size) 80-100 Pieces per Minute 250mm x 30mm R Bent Tap Hopper AC Motor and Controls Weight 1500 Lbs.
                        SHIMAZU M# 3F TWIN SPINDLE NUT TAPPER
                        $RFQ
                        SHIMAZU M# 3F TWIN SPINDLE NUT TAPPER
                        Shimazu Model 3F Twin Spindle Nut Tapper, Serial No 1743 3/16"-3/8" Product Range ( Tap Size) 80-100 Pieces per Minute 250mm x 30mm R Bent Tap Hopper AC Motor and Controls Weight 1500 Lbs.
                        Categories:
                        Condition:
                        Manufacturer:
                        Location:
                        Price:
                        •  to 
                        <Prev | 123 | 124 | 125 | 126 | 127 | 128 | 129 | 130 | 131 | 132 | Next>