Machine Sales – Buy or Sell New and Used Machinery and Machine Tools at Machine Sales

$18,000

DMG GILDEMEISTER NEF 400 CNC TURNING CENTER Make: DMG Model No.: NEF 400 Serial No.: 01710000221 YOM: 2005 Condition: Excellent Comes with 8" & 6" Chuck, Tailstock, All Original Manuals. All s

Swing: 13.8"

Chino, CA
View Listing

18" X 22" HEM MODEL V100LM3 TILT FRAME VERTICAL BAND SAW

$RFQ

18" X 22" HEM MODEL V100LM3 TILT FRAME VERTICAL BAND SAW S/N 773401 NEW 2001 CAPACITY AT 90 DEGREES -------------------- 18" X 22" CAPACITY AT 45 DEGRE

Throat capacity: 18"
Height capacity: 22"

Des Plaines, IL
View Listing

AMADA FBD-8020E CNC HYDRAULIC PRESS BRAKE, MODEL FBD 8020E

$RFQ

AMADA FBD-8020E CNC HYDRAULIC PRESS BRAKE MODEL FBD 8020E S/N 8200248 NEW 1989 TONNAGE ------------------------------------- 88 TONS OVERALL LENGTH ------------------------

Tonnage: 88T

Des Plaines, IL
View Listing

2010 KOBELCO SK170LC EXCAVATOR

$67,500

4 CYL ENGINE, 24 IN PADS, 36 IN BUCKET, HYDRAULIC THUMB, PATTERN CHANGER, ENCLOSED CAB W/ A/C & HEAT.

Sutherlin, VA
View Listing

T-Slotted Floor Plates (4) 78" x 157" Cast Iron

$RFQ

Reference #27523 T-Slotted Floor Plates (4) 78" x 157" Cast Iron Width ................................. 78.74" Length ................................ 157.48" Thickness ...................

Width: 78.74"
Length: 157.48"

Melville, NY
View Listing

SUPERMAX REBEL 1

$9,950

10 HP, FANUC OM, 25X16X24, CAT 40, 16 ATC, 4000 RPM, UNDER POWER & RUNNING

X axis: 25"
Y axis: 16"

THOUSAND OAKS, CA
View Listing

MIGHTY VIPER 1230

$36,500

50 TAPER, 6000 RPM, 20 HP, 50X25X25, MAGIC PRO 64 CNC CONTROL

THOUSAND OAKS, CA
View Listing

DELTA VERTICAL BAND SAW

$1,450

MODEL 20, S/N: 89C14C14840

THOUSAND OAKS, CA
View Listing

Wysong Mechanical Press Brake, 90 Ton x 12'

$11,750

Mechanical Press Brake Make: Wysong Model: 90-10 Capacity: 90 Ton 12" Distance Between Housing: 10'-6" Ram Stroke: 3" Length Of Bed & Ram: 12' Tonnage: 90 Weight: 16,800 LBS. Ram

Tonnage: 90T

Mooresville, NC
View Listing

RAMCO MODEL 13

$2,950

DRY MACHINE ONLY, AIR TRACKING, S/N: 1903, MANUALS, RUNS GOOD,

Width: 13"

THOUSAND OAKS, CA
View Listing

100 Ton x 118.1" AMADA RG M2 1003 UP-ACTING CNC ,MFG: 2010

$RFQ

100 TON X 118.1" AMADA RGM2 1003 UP-ACTING CNC PRESS BRAKE MFG:2010

Tonnage: 100T

NEW CITY, NY
View Listing

Cincinnati Model 1810 Shear 1/4" x 10ft, Front Arm Support, Power Back

$24,900

Cincinnati Model 1810 Shear 1/4" x 10ft, Front Arm Support, Powered BackGauge Capacity (Mild Steel): 1/4" Max. Cutting Length: 122" Between Housings: 123" Throat Depth:

Elgin, IL
View Listing

Wysong Fab140/144- 140 Ton x 12ft CNC Press Brake w/ BackGauge

$34,500

Wysong Fab140/144- 140 Ton x 12ft CNC Press Brake w/ BackGauge Tonnage: 140 Length Of Bed & Ram: 12' Between Housings: 10' 6" Ram Stroke: 0"- 8" Op

Tonnage: 140T

Elgin, IL
View Listing

1000 lb. American Steel Line #60, single uncoiler, 16"width, 48"O

$RFQ

(419) 872-2364 [email protected] STOCK NO: 1391 MODEL NO: 60 SERIAL NO: 1219 Max Weight: 1,000 Lbs. Max Width: 16" Coil I.D.: 13" – 18" Max OD: 48" Manual Expansion, 3 Arm 3 Outboard Keepers DIMENSIO

Maximum weight capacity: 1000Lb
Maximum coil width: 16"

Perrysburg, OH
View Listing

Machining Table, T-Slotted Riser/Work Table, 108" x 68" x 25&quo

$RFQ

Reference #27832 Machining Table, T-Slotted Riser/Work Table, 108" x 68" x 25" Ht, Cast Iron FEATURES: Heavy Duty Cast Iron T-Slotted In Both Directions SPECIFICATIONS: Length ..................

Width: 68"
Length: 108"

Melville, NY
View Listing

1990 TOS MODEL SU-125 HEAVY DUTY UNIVERSAL CENTER LATHE, 50” X 240”

$RFQ

WORKING CAPACITY SWING OVER BED: 50” SWING OVER THE CROSS SLIDE: 37" WIDTH & HEIGHT OF BED: 31.5” X 24.8” WEIGHT OF WORKPIECE BETWEEN CENTERS: 11,000 LBS WEIGHT OF WORKPIECE SUPPORTED BY REST:

Swing: 50"
Centers: 240"

Bethlehem, PA
View Listing

SPARTAN IW-50 HEAVY DUTY INTEGRATED IRONWORKER, 50 TON

$RFQ

SPECIFICATIONS PUNCH PRESSURE: 50 TON PUNCHING CAPACITY: 1” IN 1/2” THROAT DEPTH: 6-7/8” STROKE LENGTH: 1-3/8” CYCLES PER MINUTE IN 1/2”: 31 PUNCHING STATION WORK HEIGHT: 38-1/4” FLA

Angle L1: 3"
Angle L2: 3"

Bethlehem, PA
View Listing

Kett model AN7000

$2,000

Very lightly used Kett model AN7000. Big enough to cut the heavy stuff. The 3 horsepower, 20 AMP motor will cut 3/8" C.R. mild steel and most grades of stainless to 1/4" at 35" per minute. The SHN is prima

Olmsted Falls, OH
View Listing

1/2"-2" OD BETARAM Double Cut, Cut-Off

$RFQ

(419) 872-2364 STOCK NUMBER: 2310 MODEL NUMBER: OA-3-FD (ASE-4873) SERIAL NUMBER: E-16 Max Tube Dia.: 2" (50.8 mm) Min Tube Dia.: 1/2" (12.7 mm) Max Wall: .125" (3.17 mm) Speed: 50–300 FPM Cuts Per Minute: 50

Maximum workpiece diameter: 2"

Perrysburg, OH
View Listing

1/4" Fastener Engineers DK-02-20 Wire Drawer .250

$RFQ

No description providedMaximum Wire Diameter.250" Feed Speeds (FPM)7-60 FPM Capstan Diameter20" Motor2 HP <p>With Recoil Attachment<br />E-Manual 

Block diameter: 20"
Block diameter: 20"

Ivyland, PA
View Listing

4-3/8" SUPERMILL ( JUARISTI ) TABLE TYPE HORIZONTAL BORING MILL

$RFQ

4-3/8" SUPERMILL (JUARISTI) TABLE TYPE HORIZONTAL BORING MILL MODEL J-MDR-110 S/N 40-110-2 NEW 1981 D

Spindle diameter: 4.375"

Des Plaines, IL
View Listing

CONTINUOUS CASTING FURNACE IECO - DUAL CASTING - 12 HOURS ONLY!!!!!

$20,000

Vertical Continuous Casting Furnance, Brand: IECO With Two Independent Casting Furnance Stations. ONLY 12 metered hours of work. Like new! This Furnance was bought and tested but never used for production. It

San Antonio, TX
View Listing

3115 kN PRESS INDUSTRIAL PRESS SMG PRESSEN

$390,000

INDUSTRIAL PRESS Brand: SMG Model: HZPU-T 315-2400/1000 Fabr. Nr. 7.4067 Year: 1985 Force: 3115 kN Speed train speed 400 mm/s

San Antonio, TX
View Listing

CYLINDRICAL GRINDER - MATRIX - CYLINDRICAL GRINDING MACHINE

$8,900

CYLINDRICAL GRINDING MACHINE Brand: MATRIX Maximum diameter admitted: 7 in. 175mm Maximum length between centres: 9.5 in. 240mm Maximum recommended form diameter: 4 in. 100mm Maximum depth of form: 0.250 in 6.

San Antonio, TX
View Listing

Presicion Centerless Grinder Griding Machine for HIGH PRODUCTION NOMOCO 40

$28,000

Presicion Centerless Grinding High production NOMOCO 40 - Maxinum external diameter 40mm - Clean - Automatic dresser Whell for boot whells - Main Whell 14”X4” - Rotating Whell 14”X4” - Programable timer Au

San Antonio, TX
View Listing

*NEW* 66 Ton x 6.9' Ermak Power-Bend FALCON CNC Press Brake

$RFQ

Specifications: Capacity 66 Tons Overall Bending Length 82.5" Distance Between Columns 67" Throat 16.1" Daylight 20.9" Stroke 10.8" Y Rapid Speed 7.87 IPS Y Working Speed .55 IPS Y Retur

Tonnage: 66T

SANTA ANA, CA
View Listing

4500 lb Humphries 24"W, 11.5"-15"ID, 60" OD, 4-Arm, Mot

$RFQ

(419) 872-2364 - [email protected] STOCK #2789 MANUFACTURER: HUMPHRIES MODEL #AR45-24-DB SERIAL #696 Capacity: 4500 Lbs Coil ID: 11.5" – 15" Max. Width: 24" Max. OD: 60" EQUIPPED WITH: 4-Arm Manual Ex

Maximum weight capacity: 4500Lb
Maximum coil width: 24"

Perrysburg, OH
View Listing

Used Hardinge GD5C2 Indexer with Control Box

$4,450

Specifications: Runout Max (TIR) ................................................................. 0.00002" Backlash .......................................................................... 40 arc-sec Speed .

Schaumburg, IL
View Listing

Ramco Widebelt Metal Sander, 37"

$3,795

Wide Belt Metal Sander Make: Ramco Model: DW 37R Capacity: 37" Electrical: 220/3 phase Max. Sanding Width37" Work Height 0 - 5" Abrasive Belt Size60" x 37" W Main Drive Motor20 HP Conv

Belt width: 37"

Mooresville, NC
View Listing

27"/42" X 96" DEAN SMITH & GRACE HEAVY DUTY MODEL 25 GAP

$RFQ

27"/42" X 96" DEAN SMITH & GRACE HEAVY DUTY MODEL 25 GAP BED LATHE MODEL 25 S/N 33563-4-61 NEW 1961 MAXIMUM SWING OVER

Swing: 27"
Centers: 96"

Des Plaines, IL
View Listing

17"/24" X 60" DEAN SMITH & GRACE MODEL 1709 X 60 GAP BED

$RFQ

17"/24" X 60" DEAN SMITH & GRACE MODEL 1709 X 60 GAP BED LATHE S/N 38193-6-70 NEW 1970 SWING OVER BED ------------------------------- 17" SWING O

Swing: 17"
Centers: 60"

Des Plaines, IL
View Listing

10' X 1/4" SUMMIT HYDRAULIC POWER SQUARING SHEAR

$RFQ

10' X 1/4" SUMMIT HYDRAULIC POWER SQUARING SHEAR S/N 02664 NEW 1990 CAPACITY, MILD STEEL ------------------------ 10' X 1/4" CAPACITY, STAINLESS STEEL ---------

Maximum thickness: 0.25"
Cutting length: 10"

Des Plaines, IL
View Listing

1998 Hardinge Cobra 65 2 Axis CNC Turning Center

$16,900

SPECS: Chuck Size...................................................10” Bar Capacity............................................2.559” Spindle Configuration...........................ANSI A2-8 Axis.................

Schaumburg, IL
View Listing

ARC CNC 048

$26,876

ARC CNC 048 4X8 CNC Plasma table with Hypertherm Powermax 65 Top line Industrial machine All in one software no secondary software needed DRAW, CAM, CUT PARTS True Shape Nesting Raster to Vector to DXF conversion D

Henderson NV, NV
View Listing

Steelmaster Belt/Disc Grinding and Deburring Unit

$RFQ

Specifications: Abrasive Belt Size 38" Working Height 38" Work Piece Thickness up to 4.8" Abrasive Belt Width 38.8" Abrasive Belt Length 78" First Drive Abrasive Belt Drive 12.5/16kW

Belt width: 38"

SANTA ANA, CA
View Listing

*NEW* 33 Ton Ermaksan Servo Driven CNC Turret Punch

$RFQ

Specifications Capacity 33 US Tons Maximum Sheet Size (w/o repo) 59"x98" Maximum Punching Capacity 1/4" Maximum Hole Size 3.5" X-Axis Travel 98" + Repositioning X-Axis Velocity 3149.61 I

Tonnage: 33T

SANTA ANA, CA
View Listing

LISTA SLIDING DOOR SHELF CABINET, W SERIES

$RFQ

LISTA SLIDING DOOR SHELF CABINET DW SERIES CABINET DIMENSIONS ------------------------ 28-1/2" X 56-1/2" X 39" H 2 SLIDING DOORS

Des Plaines, IL
View Listing

LISTA SLIDING DOOR SHELF CABINET DW SERIES

$RFQ

LISTA SLIDING DOOR SHELF CABINET DW SERIES CABINET DIMENSIONS ------------------------ 28-1/2" X 56-1/2" X 39" H 2 SLIDING DOORS

Des Plaines, IL
View Listing

LISTA SLIDING DOOR SHELF CABINET DW SERIES

$RFQ

LISTA SLIDING DOOR SHELF CABINET DW SERIES CABINET DIMENSIONS ------------------------ 28-1/2" X 56-1/2" X 39" H 2 SLIDING DOORS

Des Plaines, IL
View Listing

LISTA SLIDING DOOR SHELF CABINET DW SERIES

$RFQ

LISTA SLIDING DOOR SHELF CABINET DW SERIES CABINET DIMENSIONS ------------------------ 28-1/2" X 56-1/2" X 39" H 2 SLIDING DOORS

Des Plaines, IL
View Listing

#HS-70AM BROTHER CNC WIRE EDM

$RFQ

#HS-70AM BROTHER CNC WIRE EDM S/N 111462 NEW 2006 RATED CUTTING SPEED ------------------- 28" SQ/HR MAXIMUM WORKPIECE DIMENSIIONS ---- 22.8" X 15.3" X 6.7" MAXIMUM WORKPIECE

X axis travel: 16.1"
Y axis travel: 10.2"

Des Plaines, IL
View Listing

8" X 18" MITSUI AUTOMATIC HYDRAULIC SURFACE GRINDER, MODEL MSG 25

$RFQ

8" X 18" MITSUI AUTOMATIC HYDRAULIC SURFACE GRINDER WITH INCREMENTAL DOWNFEED MODEL MSG 250H-2AH S/N 97103955 NEW 1997 FROM PROTOTYPE SHOP

Table width: 8"
Table length: 18"

Des Plaines, IL
View Listing

13" MITUTOYO #PH350 OPTICAL COMPARATOR

$RFQ

13" MITUTOYO #PH350 OPTICAL COMPARATOR S/N 90049 TABLE SIZE ------------------------------------- 16" X 6" STAGE TRAVEL --- ( HORIZONTAL ) ----------- 6" STAGE TRAVEL --- ( V

Screen diameter: 13"

Des Plaines, IL
View Listing

BAILEIGH PH-28HD Power Hammer

$RFQ

CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: The PH-28HD Power Hammer was designed right here in Wisconsin to do one thing, and one thing only.…hit….and hit hard. With a hit up to 75% harder than it’s predec

Port Orange, FL
View Listing

AAF TYPE N ROTOCLONE WET TYPE COLLECTION SYSTEM ( HYDROSATIC PRECIPITATOR)

$RFQ

AAF TYPE N ROTOCLONE WET TYPE COLLECTION SYSTEM ( HYDROSATIC PRECIPITATOR ) S/N N860039 ARRANGEMENT B, SIZE 2.5 CLEANS THE AIR BY THE COM

Des Plaines, IL
View Listing

2012 WACKER NEUSON RTSC2 TRENCH ROLLER

$12,500

3 CYL KOHLER ENGINE, HYDRO-STATIC TRANS, 32 IN PADFOOT SPLIT DRUMS, DRUM DRIVE, 1 SPD HIGH VIBRATION, REMOTE CONTROL

Sutherlin, VA
View Listing

ROTAB 10' DIAMETER TABLE POSITIONER

$14,950

10 TON CAPACITY HYDRAULIC POSITIONER

Weight capacity: 20000Lb

THOUSAND OAKS, CA
View Listing

GROVE MODEL RT58 MOBILE TRUCK CRANE

$14,500

16 TON MOBILE TRUCK CRATE

Lifting capacity: 16T

THOUSAND OAKS, CA
View Listing

5/8" x 14' Cincinnati 5FL14 Hydraulic Squaring Shear

$RFQ

Reference #27659 5/8" x 14' Cincinnati 5FL14 Hydraulic Squaring Shear Age: 1971 Model: 5FL14 Nominal Capacity ..................... 5/8" Capacity @ Increased Rake ............ 3/4" x 14&#

Maximum thickness: 0.625"
Cutting length: 168"

Melville, NY
View Listing

16 B&K Gearboxes and Outboards (Spares)

$2,500

16 B&K Gearboxes and Outboards, Stock# 2944 SPECIFICATIONS: (Per Gearbox) Spindle Diameter: 1-1/2" Roll Space: 12" Spindle Key Size: 1/4" Base Top to Center Lower Spindle: 7-1/4" Vertical Adjustment: 4-1/2" - 7-1

# Stands: #1
Roll diameter: 1.5"

Perrysburg, OH
View Listing

Verson 600 Ton Straight Side Double Crank Mechanical Press

$RFQ

Verson 600 Ton Straight Side Double Crank Mechanical Press S/N: 24770, Stock No: 17951 Model S2-600-120-72T Capacity: 600 Tons Stroke: 10” Speed: 20-40 SPM Shut Height: 46” Ram Adjustment: 12” Bed Size: 120” L-R

Tonnage: 600T
Stroke: 10"

Nashville, TN
View Listing

192" Farrel Fixed Rail 4-Axis CNC Vertical Boring Mill

$RFQ

Reference #27803 192" Farrel Fixed Rail 4-Axis CNC Vertical Boring Mill Rebuilt: 2010 FEATURES: Extended Ram Travel 2-Vertical Rams 125 TON Table Capacity CAPACITY: Table Diameter ..................

Swing: 202"

Melville, NY
View Listing

Niagara E Series 150 Ton OBI Press

$RFQ

Niagara E Series 150 Ton OBI Press S/N: 52221, Mfg: 1984, Stock No: 17946 Model E-150 Capacity: 150 Ton Stroke: 10” Shut Height: 26” SDAU Adjustment: 6” Bed Area: 50” L-R x 30” F-B Ram Area: 34” L-R x 24” F-B x 2

Tonnage: 150T
Stroke: 10"

Nashville, TN
View Listing

42" X 48" X 264 FUTURMILL/INGERSOLL DOUBLE HOUSING PLANER MILL

$RFQ

42" X 48" X 264 FUTURMILL/INGERSOLL DOUBLE HOUSING PLANER MILL FUTURMILL CONVERSION OF INGERSOLL MACHINE, INCLUDING MILLING HEADS, DRIVES, ELECTRICS & CONTROLS

Table width: 42"
Table length: 264"

Des Plaines, IL
View Listing

6” x 18” Manual Abrasive Surface Grinder

$2,500

6” x 18” Manual Abrasive Surface Grinder SPECIFICATIONS & EQUIPMENT: 6” x 12” Permanent Magnetic Chuck (would replace with 6”x18”) Roller ways Manual Lub W/Coolant Volt 220, Phase 3, Cycle 60, AMP 5.18

Rochester, NY
View Listing

Bridgeport, Series I, Vertical Milling Machine S/N: 243872

$6,800

Bridgeport, Series I, Vertical Milling Machine S/N: 243872 Specifications: Table 9” x 48” Spindle R-8 Electrics 2 HP, 220/440 volt 3-phase (now 440) Chrome ways Equipped With: Power drawbar Accurite III 2

Rochester, NY
View Listing

Fosdick 24” Drill SN 20899

$2,250

Fosdick 24” Drill SN 20899 SPECIFICATIONS: Swing 24” Spindle #3MT Electric 220/440/3 phase Manual feed Now Wired 440/3 phase Spindle speeds (6) 55,110,162,325,450 900 rpm Accessories: ¾” Jacobs Supe

Rochester, NY
View Listing

Magnetic Chucks

$0

Magnetic Chucks SPECIFICATIONS & EQUIPMENT: We have an assortment of magnetic chucks from 6”x12” to 20”x60” Both permanent and electromatic CONDITION: Good PRICE: F.O.B. Rochester, "as

Rochester, NY
View Listing

Moore Tool Cabinet

$1,000

Moore Tool Cabinet SPECIFICATIONS & EQUIPMENT: CONDITION: Good Missing keys PRICE: F.O.B. Rochester, "as-inspected" $ 1,000.00 Terms: Payment prior to shipment Delivery: Immedi

Rochester, NY
View Listing

Two Ray Tech Vibratory Tumbler SN: 39897

$500

Two Ray Tech Vibratory Tumbler SN: 39897 SPECIFICATIONS & EQUIPMENT: 17” Opening Tilting bowl 120 volt motor CONDITION: Good Machine can be demonstrated under power PRICE: F.O.B. Roches

Rochester, NY
View Listing

Rotary Tables

$0

Rotary Tables SPECIFICATIONS & EQUIPMENT: We have an assortment of rotary tables from 10” to 22” diameter, manual and powered CONDITION: Good PRICE: F.O.B. Rochester, "as-inspected"

Rochester, NY
View Listing

Summit Tool & Cutter Model: 17T-C SN: 6745

$2,750

Summit Tool & Cutter Model: 17T-C SN: 6745 Specifications: 220 Volts, 3 Ph 5-Collets Index Fixtures Equipped With: Lamp Assorted tooling as shown Condition: Good Machine can be demonstrated un

Rochester, NY
View Listing

Toledo Counting Scale

$1,000

Toledo Counting Scale SPECIFICATIONS & EQUIPMENT: 1:9 and 1:99 ratios 750 lb. Capacity CONDITION: Good Recently calibrated Machine can be demonstrated PRICE: F.O.B. Rochester, "as-ins

Rochester, NY
View Listing

SHARP VERTICAL/HORIZONTAL KNEE TYPE MILL

$RFQ

SHARP MODEL VH-25 COMBINATION VERTICAL/HORIZONTAL KNEE TYPE MILL S/N 85020505 NEW 1997 TABLE SIZE -------------------------------------- 10"

Table width: 10"
Table length: 56"

Des Plaines, IL
View Listing

CNC Murata Wiedemann Turret Punch 22 tons

$12,795

CNC Murata Wiedemann Turret Punch Model: C2500 Capacity: Tons 22 Sheet Size 49" x 49" (49" x 98" w/repo) Hits Per Minute on 1" Centers 200 Number of Turret Stations 22 (2 Auto Index) Max

Tonnage: 22T

Mooresville, NC
View Listing

52" KING VERTICAL BORING & TUNING MACHINE

$RFQ

ONE (1) USED 52" KING VERTICAL BORING & TUNING MACHINE NEW: 1955 SPECIFICATIONS: TABLE DIAMETE

Swing: 60"

Bedford, OH
View Listing

120" Summit Vertical Boring Mill

$RFQ

Reference #27847 120" Summit Vertical Boring Mill Age: 1980 Model: SC3200 FEATURES: Swivel Left Hand Ram Head Swivel Right Hand Turret Right Hand Side Head Full Pendant Control CAPACITIES: Table D

Swing: 129"

Melville, NY
View Listing

2-Roll Weld Pressure Unit

$RFQ

419-872-2364 / [email protected] SPECIFICATIONS: Capacity: 2" O.D. Tube Overall Dimensions: 14" x 22" x 12" Approximate Weight: 250 Lbs. LOCATION: Universal Warehouse, Perrysburg, Ohio

Perrysburg, OH
View Listing

Cincinnati #1 Filmatic Centerless Grinder

$RFQ

No description providedApprox. Weight3,000 lbs Approx. Floor Size5'L x 4'6" W x 5'H <ul> <li>Filmatic Bearings</li> </ul>

Ivyland, PA
View Listing

14" STARTRITE MANUAL CIRCULAR NON FERROUS COLD SAW, MODEL CN350MP

$RFQ

14" STARTRITE MANUAL CIRCULAR NON FERROUS COLD SAW MODEL CN350MP RACO Stock Number R018370 MAXIMUM BLADE SIZE --------------------------- 14" CAPACITY -- ( ROUND, AT 90 DEG. ) ------------ 4-7/18" C

Blade diameter: 14"

Des Plaines, IL
View Listing

Wire Decoiler Wire Mate

$RFQ

No description providedApprox. Weight1,000 lbs Approx. Floor Size5' Square

Ivyland, PA
View Listing

****UNUSED**** Haas 2-Axis Trunion Type Rotary Table, Model No TR210

$RFQ

Table Dimensions 8.3" Platter Dimensions, 200 # Wgt. Capacity, Manufacturer ****UNUSED**** Haas 2-Axis Trunion Type Rotary Table, Model No TR210, Serial No. 906966, Year Mfg. 2016, Part Swing: 23.5", Max Speed:

Elk River, MN
View Listing

JP Balancing Machine PHCW-100 high speed driveshaft balancer (220lb)

$34,000

JP PHCW-100 is a 220lb capacity high speed driveshaft balancer with work piece diameter up to 5" and length up to 78" (additional lengths available). This is a high speed balancer cable of balancing 1, 2 &

Capacity: 220Lb
Length: 78"

West Bloomfield, MI
View Listing

ACCO 5 TON HOIST (BRAND NEW)

$6,950

MODEL C2W05, 20', 230/3PH (NEVER BEEN USED, STILL ON CRATE)

THOUSAND OAKS, CA
View Listing

1982 AMADA RG-100S UPACTING HYDRAULIC PRESS BRAKE, 100 TON X 102"

$RFQ

SPECIFICATIONS CAPACITY: 100 TON MAXIMUM BENDING LENGTH: 102.3” STROKE: 3.94" OPEN HEIGHT: 13.79" THROAT DEPTH: 15.76" DISTANCE BETWEEN HOUSINGS: 80.8” SPEED (RISING): 2.32 IPS SPEED (BENDING):

Tonnage: 100T

Bethlehem, PA
View Listing

SOUTH BEND MODEL 10” HEAVY ENGINE LATHE, 10” X 26”

$RFQ

SPECIFICATIONS SWING: 10” CENTER DISTANCE: 26-7/8” NUMBER SPINDLE SPEEDS WITH BACK GEAR: 1-3/8”” THREADS: 4 – 184 TPI GENERAL DIMENSIONS: 60” LR X 24” FB X54” H ELECTRICS: 110 VOLTS, 1 PH, 60 CY

Swing: 10"
Centers: 26"

Bethlehem, PA
View Listing

CLAUSING COLCHESTER 8050 GEARED HEAD STRAIGHT BED ENGINE LATHE, 17" X

$RFQ

SPECIFICATIONS SWING OVER BED: 17-1/4" SWING OVER SADDLE WINGS: 17-1/4" SWING OVER CROSS SLIDE: 10-1/2" BAR CAPACITY THRU SPINDLE: 3" DISTANCE BETWEEN CENTERS: 60" HEADSTOCK SPINDLE NOSE: D1

Swing: 17"
Centers: 40"

Bethlehem, PA
View Listing

LEBLOND REGAL MODEL 19 INCH/METRIC ENGINE LATHE, 19” X 54”

$RFQ

CAPACITY SWING OVER BED: 19-1/4" SWING OVER CROSS SLIDE: 12-1/4” DISTANCE BETWEEN CENTERS: 54” SIZE OF TOOL – FORGED: 5/8” X 1-1/4” SIZE OF TOOL HOLDER: 5/8” X 1-3/8” HEADSTOCK SPINDLE SPEEDS (12): 40 – 1,6

Swing: 19"
Centers: 54"

Bethlehem, PA
View Listing

KUHLMANN MODEL SU2 TOOL & CUTTER GRINDER

$RFQ

SPECIFICATIONS POWER RATING: 3/4 HP MOTOR SPEED: 2,800 RPM GRINDING SPINDLE SPEED: 5,600 RPM TOOL MOUNT - MAXIMUM TOOL DIAMETER: 0.7" TAPER SHANKS: #1 & #2 MT TOOL MOUNT ADJUSTMENTS LATERAL: 0

Bethlehem, PA
View Listing

SUPERMAX YCM-1-1/2VA 2-AXIS CNC VERTICAL MILL, PROTOTRAK MX2, 9" X 49&

$RFQ

SPECIFICATIONS TABLE TABLE SIZE: 9" X 49" T SLOTS (WIDTH X NO. X DISTANCE): 5/8" X 3 X 2-1/2" TRAVELS LONGITUDINAL: 30" CROSS: 12" VERTICAL: 16" RAM TRAVEL: 12" QUILL

Bethlehem, PA
View Listing

Okuma LB15 CNC Lathe

$RFQ

Chuck Size Microcentric Collet Chuck, Manufacturer Okuma CNC Lathe, Model No. LB15, Serial No. 5912-1959, Year Mfg. , Control OSP5000L, Swing , Specifications: A2-6″ SPINDLE NOSE 2″ SPINDLE BORE OSP 5000 CONTROL 20.47

Centers: 20.47"

Elk River, MN
View Listing

Mazak Model No. MTV-655/80 Vertical Machining Center

$19,900

Mazak Model No. MTV-655/80 VMC, 78.7" x 25.6" x 25.6" Travels, Mazatrol M32, Dual Pallet Shuttle

X axis: 78.7"
Y axis: 25.6"

Elk River, MN
View Listing

JP Vertical balancing Machine PHLD-200 (440lb capacity)

$32,500

JP PHLD-200 is a 440lb capacity hard bearing balancing machine with a work piece diameter up to 39" and height up to 7.75". Standard features include a Windows based touch screen operated measuring system with

Capacity: 440Lb
Length: 7.75"

West Bloomfield, MI
View Listing

JP Balancing Machine PHLD-100 Vertical Balancer (220lb capacity)

$24,500

JP PHLD-100 is a 220lb capacity vertical balancing machine with a work piece diameter up to 39" and height up to 7.75". Standard features include a Windows based touch screen operated measuring system with data

Capacity: 220Lb
Length: 7.75"

West Bloomfield, MI
View Listing

JP Vertical Balancing Machine PHLD-42 (92lb capacity)

$19,500

JP PHLD-42 is a 92lb capacity hard bearing balancing machine with a work piece diameter up to 31.5" and height up to 6". Standard features include a Windows based touch screen operated measuring system with dat

Capacity: 92Lb
Length: 6"

West Bloomfield, MI
View Listing

JP Vertical balancing Machine PHLD-5 (11lb capacity)

$17,500

JP PHLD-5 is a 11lb capacity vertical hard bearing balancing machine with a work piece diameter up to 13.5" and height up to 4.75". Standard features include a Windows based touch screen operated measuring syst

Capacity: 11Lb
Length: 4.75"

West Bloomfield, MI
View Listing

JP Dynamic Balancing Machine PHQ-5 (11lb capacity)

$16,500

JP PHQ-5 is a 11lb capacity horizontal dynamic hard bearing balancing machine with a work piece diameter up to 12" and length up to 19.5". Standard features include a Windows based touch screen operated measuri

Capacity: 11Lb
Length: 19.5"

West Bloomfield, MI
View Listing

JP Dynamic Balancing Machine PHQ-30000 (66000lb capacity)

$RFQ

JP PHQ-30000 is a 66000lb capacity horizontal dynamic hard bearing balancing machine with a work piece diameter up to 138" and length up to 236" (additional lengths available). Standard features include a Windo

Capacity: 66000Lb
Length: 236"

West Bloomfield, MI
View Listing

JP Dynamic Balancing Machine PHQ-18000 (40000lb capacity)

$RFQ

JP PHQ-18000 is a 40,000lb capacity horizontal dynamic hard bearing balancing machine with a work piece diameter up to 110" and length up to 165" (additional lengths available). Standard features include a Wind

Capacity: 40000Lb
Length: 110"

West Bloomfield, MI
View Listing

Doall TF-1418 Tilting Frame Vert. Band Saw, Unused

$RFQ

Please Refer To Machine # 945567 DoAll TF-1418 S0690 Saws - Band Vertical Capacity Manufacturer DoAll Tilting Frame Vertical Band Saw Model No. TF-1418 Serial No. 605-13112 Year Mfg. 2013

Elk River, MN
View Listing

JP Dynamic Balancing Machine PHQ-5000 (11000lb capacity)

$37,500

JP-5000 is a 11000lb capacity horizontal dynamic hard bearing balancing machine with a work piece diameter up to 94.5" and length up to 90" (additional lengths available). Standard features include a Windows ba

Capacity: 11000Lb
Length: 90"

West Bloomfield, MI
View Listing

JP Dynamic Balancing Machine PHQ-3000 (6600lb capacity)

$35,500

JP PHQ-3000 is a 6600lb capacity horizontal dynamic hard bearing balancing Machine with a work piece diameter up to 82.5" and length up to 90" (additional lengths available). Standard features include a Windows

Capacity: 6600Lb
Length: 90"

West Bloomfield, MI
View Listing

JP Dynamic Balancing Machine PHQ-2000 (4400lb capacity)

$30,500

JP PHQ-2000 is a 4400 lb capacity horizontal dynamic hard bearing balancing machine with a work piece diameter up to 71" and length up to 70" (additional lengths available). Standard features include a Windows

Capacity: 4400Lb
Length: 70"

West Bloomfield, MI
View Listing

JP Dynamic Balancing Machine PHQ-1000 (2200lb capacity)

$25,500

JP PHQ-1000 is a 2200lb capacity horizontal dynamic hard bearing balancing machine with a work piece diameter up to 63" and length up to 70" (additional lengths available). Standard features include a Windows b

Capacity: 2200Lb
Length: 70"

West Bloomfield, MI
View Listing

JP Dynamic balancing machine PHQ-500 (1100lb capacity)

$21,500

JP PHQ500 is a 1100lb capacity horizontal dynamic hard bearing balancing machine with a work piece diameter up to 59" and length up to 50" (additional lengths available). Standard features include a Windows bas

Capacity: 1100Lb
Length: 50"

West Bloomfield, MI
View Listing

JP Dynamic Balancing Machine PHQ-300 (660lb capacity)

$19,500

JP PHQ-300 is a 660LB Capacity horizontal dynamic hard bearing balancing machine with a work piece diameter up to 48" and length up to 50" (additional lengths available). Standard features include Windows based

Capacity: 660Lb
Length: 50"

West Bloomfield, MI
View Listing

JP Dynamic Balancing Machine PHQ-160 (350lb capacity)

$18,500

JP PHQ-160 is a 350lb capacity horizontal dynamic balancing machine with a work piece diameter up to 39.5" and length up to 50" (additional lengths available). Standard features include Windows based touch scre

Capacity: 350Lb
Length: 50"

West Bloomfield, MI
View Listing

JP Dynamic Balancing Machine PHQ-50 (110lb capacity)

$17,500

JP PHQ50 is a 110lb capacity horizontal dynamic hard bearing balancing machine with a work piece diameter up to 27" and length up to 27.5" (additional lengths available). Standard features include a Windows bas

Capacity: 110Lb
Length: 27.5"

West Bloomfield, MI
View Listing

1/4" Fastener Engineers DK-02-20 Wire Drawer

$RFQ

No description providedCapstan Diameter20" Production Rates7 - 60 FPM Maximum Wire Diameter.250"

Ivyland, PA
View Listing

ROMI C680 COMBINATION LATHE MFG:2012

$RFQ

ROMI C680, PRO STANDARD CONTROL,MFG:2012

NEW CITY, NY
View Listing

buy & sell, new & used machinery, machine tools & equipment

Machines currently for sale: