buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 801 - 900 of 21108 matches
Sort by:
Items Per Page:  20 |  50 |  100
18" Throat 22" Height Amada/Marvel MODEL VT4555M (8-MARK III) BAND SAW, 5 HP, Po
$54,700
18" Throat 22" Height Amada/Marvel MODEL VT4555M (8-MARK III) BAND SAW, 5 HP, Po
NEW MARVEL TILT FRAME BAND SAW MODEL: SERIES 8 MARK III - VT4555M   SPECIFICATIONS: RECTANGULAR CAPACITY: -CAPACITY NOMINAL ................... 18" X 22" -CAPACITY 45 DEGREES RIGHT .......... 18&quo
Kao Ming 40S, UNIVERSAL TCG, TILT WHEELHEAD TOOL CUTTER GRINDER, ROLLER BEARING TABLE, MA
$RFQ
Kao Ming 40S, UNIVERSAL TCG, TILT WHEELHEAD TOOL CUTTER GRINDER, ROLLER BEARING TABLE, MA
   KAO MING  UNIVERSAL TOOL & CUTTER GRINDER WITH  TILTING WHEELHEAD, FRONT & REAR HANDWEHEELS,  A ROLLER BEARING TABLE, FULL CAST IRON  CONSTRUCTION, AND COMES WITH MANY ACCES
40" X Axis 18" Y Axis Hurco VM2 VERTICAL MACHINING CENTER, Hurco Max Cntrl, 8,00
$22,950
40" X Axis 18" Y Axis Hurco VM2 VERTICAL MACHINING CENTER, Hurco Max Cntrl, 8,00
HURCO VERTICAL MACHINING CENTER MODEL: VM2, S/N: VM2-06006094AEA, NEW: 2005   SPECIFICATIONS:   X-AXIS TRAVEL ......................... 40" Y-AXIS TRAVEL ......................... 18" Z-AXIS T
1500 CFM Hammond DusKolector DK-8 DUST COLLECTOR, 460V/3/60 ELECTRICS
$RFQ
1500 CFM Hammond DusKolector DK-8 DUST COLLECTOR, 460V/3/60 ELECTRICS
 HAMMOND DUST COLLECTOR   MODEL: "DusKolector DK-8"     SERIAL NUMBER: DK-12647   5 H.P. MOTOR 460 VOLTS/3 PH/60 Hz   1500 CFM 8" INLET DIAMETER   **
6" Width 18" Length Brown Sharpe 618 VALUEMASTER, MADE IN JAPAN BY AMADA IN 198
$RFQ
6" Width 18" Length Brown Sharpe 618 VALUEMASTER, MADE IN JAPAN BY AMADA IN 198
6" X 18" BROWN & SHARPE (MADE IN JAPAN BY AMADA Co.) "SUPER-PRECISION" HAND FEED SURFACE GRINDER WITH 2-AXIS DIGITAL READOUT           &nbs
Pexto 3617-C CRIMP BEADING MACHINE
$4,450
Pexto 3617-C CRIMP BEADING MACHINE
  ROPER WHITNEY (PEXTO) Power Beading (Combination) Machine MODEL 3617-C         S/N  423-11-86        NEW 1986   Capacity, up
75 Ton 15" Stroke Denison QA75 HYDRAULIC PRESS
$17,500
75 Ton 15" Stroke Denison QA75 HYDRAULIC PRESS
  DENISON MULTIPRESS 75 TON  C-FRAME HYD. PRESS MODEL QA75C492D52A107A112         S/N 19556         NEW 1966   Capacity .
17" Swing 67" Centers Kingston HJ-1700 ENGINE LATHE
$RFQ
17" Swing 67" Centers Kingston HJ-1700 ENGINE LATHE
NEW KINGSTON HJ SERIES HIGH PRECISION LATHE MODEL: HJ-1700   SPECIFICATIONS: SWING OVER BED: ....................... 17" SWING OVER CROSS SLIDE: ............... 10.6" SWING IN GAP: .................
12.2" W or Dia Haas TR310 4th AXIS CNC ROTARY TABLE, Trunnion Table, 2-Axis Drives C
$22,500
12.2" W or Dia Haas TR310 4th AXIS CNC ROTARY TABLE, Trunnion Table, 2-Axis Drives C
- HAAS CNC TRUNNION TABLE MODEL: TR 310, S/N: 903177, MFG: 2009                           
10" Width 0.139" Cap. Press Room Eqpt PE-MB-10-1-2 STRAIGHTENER
$10,950
10" Width 0.139" Cap. Press Room Eqpt PE-MB-10-1-2 STRAIGHTENER
  10" x .139" PRESS ROOM EQUIPMENT STRAIGHTENER MODEL PR-MD-10-I-2       S/N 1098-063       Year 1999   Capacity .......................
14" MASTER VIEW IV 4.5" X 19.5" TABLE, 10X LENS, PROFILE &am
$RFQ
14" MASTER VIEW IV 4.5" X 19.5" TABLE, 10X LENS, PROFILE &am
Table Size: 4.5” X 19.5” Table Travels: 4” Vertical X 8” Left to Right Screen: Reading to 5 Minutes of Arc with Vernier Length: 47.25” Width: 22.5” Height: 32.5” Weight: 200 Lbs. WITH: Sur
  • Screen diameter: 14"
    Shaper 3/1 3/4"&1-1/4"spndl PM
    $2,999
    Shaper 3/1 3/4"&1-1/4"spndl PM
    Shaper 3/1 3/4"&1-1/4"spndl PM Model: 1280100C PM2700 [Powermatic] S/N: 100227001490 3/4" & 1-1/4" Spindle w/1/2" & 1/4" Router Collet; Freud UC900 Cutter Set 3Hp; 1Ph; 230Vo
    Cab Saw 10x32 3/1 LT PM
    $1,999
    Cab Saw 10x32 3/1 LT PM
    Cab Saw 10x32 3/1 LT PM Model: 1792000K PM2000 [Powermatic] S/N: 1712200010203 Left Tilt Cabinet Saw w/32" Fence; Miter Gauge; Extra Inserts 3Hp; 1Ph; 230Volt
    2001 Amada HFE 100-3
    $RFQ
    2001 Amada HFE 100-3
    Amada HFE 100-3, 110 Ton, Amada Operator Control, Year new: 2001 2001 Amada HFE 100-3 110 ton 10’ brake, 8 axis great for stage and offset bending, powerful control to store programs and tooling info for fast set up
    • Tonnage: 110T
      2008 Trumpf True Bend 3120
      $RFQ
      2008 Trumpf True Bend 3120
      Trumpf True Bend 3120 is a low cost high-end 120 Metric Tons, 10’ brake with 4 axis simple design. Model: Trumpf True Bend 3120 Tonnage: 137 US Tons Max Bend Length: 122” Max Stroke Length: 7.87” Open Height: 15”
      Grieve WTH446-650 Walk-in, 4' x 6'H x 4', 650F UNUSED
      $RFQ
      Grieve WTH446-650 Walk-in, 4' x 6'H x 4', 650F UNUSED
      Grieve walk-in oven model WTH446-650, 48"W x 72"H x 48"L work area, 650F, double door opening, aluminized steel interior, insulated floor with wheel guide channels, horizontal air-flow, 460V, 3PH, 40KW, 2H
      • Chamber width: 48"
      • Chamber length: 48"
        Cab Saw 10x52 3/1 RT Delta
        $1,999
        Cab Saw 10x52 3/1 RT Delta
        Cab Saw 10x52 3/1 RT Delta Model: 36-812 Unisaw [Delta] S/N; 95J90333 10" Right Tilt Cabinet Saw w/52" Fence; Miter Gauge 3Hp; 1Ph; 230Volt
        Planer/Jointer Combo 8.5" MblB
        $999
        Planer/Jointer Combo 8.5" MblB
        Planer/Jointer Combo 8.5" MblB Model: 343.132.01 [Inca] S/N: 3202012410 8-1/2" Planer/Jointer w/Mobile Stand & Extra Knives 3/4Hp; 1Ph; 115/230Volt
        Dust Collector 3hp Cycln Lagna
        $2,499
        Dust Collector 3hp Cycln Lagna
        Dust Collector 3hp Cycln Lagna Model: PFLUX3 [Laguna] S/N: 2129098 Cyclone w/Wheels 3Hp; 1Ph; 220Volt
        • Motor: 3HP
          2012 AMADA Astro 100NTIII
          $RFQ
          2012 AMADA Astro 100NTIII
          Amada Astro 100NT III features Amada’s servo HDS down acting ram with dual robots for loading, unloading and stacking for cost saving unmanned operation of large running jobs. Model: Astro 100NTIII Tonnage: 110 Max
          • Tonnage: 110T
            2016 Amada HD 8025 NT
            $RFQ
            2016 Amada HD 8025 NT
            Model: HD 8025 NT Tonnage: 88 Max Bend Length: 101” Max Stroke Length: 7.87” Open Height: 18.5” Throat Depth: 16.5” Distance Between Frames: 83.5” Control: AMADA AMNC-PC Axis: 7 Machine Height: 84” Machine Leng
            • Tonnage: 88T
              59"W x 47"H x 43"D, Nabertherm N2000/60HA DB200-4, 1112F, El
              $RFQ
              59"W x 47"H x 43"D, Nabertherm N2000/60HA DB200-4, 1112F, El
              New Never Commissioned - 2018 Serial No. - 345806 SPECIFICATIONS: Oven Chamber............59"W x 43.3"D x 47.2"H Work Space............51.2"W x 35.4"D x 39.4"H Oven Chamber Volume....
              Series I, Bridgeport, 9"x48" Tbl, 30"X, 12"Y, 16"Z
              $RFQ
              Series I, Bridgeport, 9"x48" Tbl, 30"X, 12"Y, 16"Z
              Serial No. 12BR118044 New - 1984 SPECIFICATIONS: Table Size............9" x 42" Table Travel - Longitudinal............30" Table Travel - Cross............12" Vertical Travel of Knee........
              13" x 24" Kellenberger 600U, 3-Wheel Design, ID Spindle, Coolant
              $RFQ
              13" x 24" Kellenberger 600U, 3-Wheel Design, ID Spindle, Coolant
              New - 1986 Serial No. 32460-2211 SPECIFICATIONS: Height of Centers, as Presently Configured............9.84" (250 mm) Nominal Swing without Riser Blocks............13" Riser Block Height............2.95&
              Bellaform BSW-135, High Shear, Continuous, Roller type, Up to 110 Lbs./Hr.
              $RFQ
              Bellaform BSW-135, High Shear, Continuous, Roller type, Up to 110 Lbs./Hr.
              High shear mixers like the Bellaform BSW-135 are an excellent option for high-purity, contamination-free, continuous processing of medium to high viscosity feedstocks. They are the best constantly functioning open design
              10" x 40" Kellenberger 1000U-125, 3-Wheel Design, ID Spindle, Coo
              $RFQ
              10" x 40" Kellenberger 1000U-125, 3-Wheel Design, ID Spindle, Coo
              New - 1990 Serial No. 32.467.2911 SPECIFICATIONS: Distance Between Centers............39-3/8" Distance Between Centers w/ Tailstock Overhanging............47-1/4" Height of Centers............4.96"
              Fenn 6F-4, 2.25" Solids, 4.5" Tubing, 6.5"L x4"W x4&quo
              $RFQ
              Fenn 6F-4, 2.25" Solids, 4.5" Tubing, 6.5"L x4"W x4&quo
              Serial No. 52644 Year Built - 2007 SPECIFICATIONS: Capacity: - Solids............2.25" - Tubing............4.5" Die Size: - Width............4" - Height............4" - Length............6.
              Thermotron FM-64-SS-5, Temp & Humidity, 10°C - 90°C, 44"
              $RFQ
              Thermotron FM-64-SS-5, Temp & Humidity, 10°C - 90°C, 44"
              New - 2019 Serial No. 49662 SPECIFICATIONS: Temperature range............10°C - 90°C Humidity range............20% to 95% Interior dimensions............44"(L-R) x 37"(F-B) x 44"(H) Elect
              Thermotron S-1.2C, Temperature, 100°F-356°F, 16"W x 11"
              $RFQ
              Thermotron S-1.2C, Temperature, 100°F-356°F, 16"W x 11"
              New - 1998 Serial No. 28380 SPECIFICATIONS: Temperature range............-73°C to 180°C (-99.4°F to 356°F) Dimensions: - Internal............16"(L-R) x 11"(F-B) x 12"(H) - Exter
              15 Ton, Gasbarre Standard Series, 2.5" Fill, 4.5" Stroke, 12-70 S
              $RFQ
              15 Ton, Gasbarre Standard Series, 2.5" Fill, 4.5" Stroke, 12-70 S
              New - 1985 Serial No. 85213 SPECIFICATIONS: Capacity - maximum............15 Tons Speed range............12 - 70 SPM Drive power............2 HP Capacities: - Die platen............7.5 T - Lower punch..........
              MPE 600 Series 3-Hi Gran-U-Lizer 666 "F", (3) 6" x 8" R
              $RFQ
              MPE 600 Series 3-Hi Gran-U-Lizer 666 "F", (3) 6" x 8" R
              New - 2014 Job No. 10521 SPECIFICATIONS: Roll size............6" x 8" Grinding Sections: - Quantity............3 - Orientation............Stacked Roll Gaps: - First............F2383 Gap range - Secon
              50T Greenerd HCA-50-18R, 0-15" Strk, 18" DLO, 15" Thrt, 42&q
              $RFQ
              50T Greenerd HCA-50-18R, 0-15" Strk, 18" DLO, 15" Thrt, 42&q
              New - 2007 Serial No. 07T6687 SPECIFICATIONS: Tonnage............50 Bed area............42"(L-R) x 24"(F-B) 4-Post guided slide............40"(L-R) x 17"(F-B) Stroke............0 - 15" D
              JenFab Lean Clean 360-1 Rotary Basket Parts Washer
              $RFQ
              JenFab Lean Clean 360-1 Rotary Basket Parts Washer
              SPECIFICATIONS: Load Height 42” Basket Size 11-1/2” x 7-1/2” x 6” Height Tank Volume 50 Gallon Wash/50 Gallon Rinse Wash Pump 3 HP Rinse Pump 3 HP Dry Blower 5HP Electrics 3/60/460V EQUIPPED WITH: Eaton Touch S
              Kitamura MyCenter 3X CNC Vertical Machining Center
              $RFQ
              Kitamura MyCenter 3X CNC Vertical Machining Center
              SPECIFICATIONS: Table Size 16” x 35 1/2” X-axis Travel (Longitudinal) 30” Y-axis Travel (Cross) 18” Z-axis Travel (Vertical) 18” Spindle Nose to Top of Table 5”-23” Spindle Speeds 20-10,000 RPM Spindle Taper CAT4
              Brother Speedio M140X2 5-axis CNC Vertical Drilling, Milling, and Turning C
              $RFQ
              Brother Speedio M140X2 5-axis CNC Vertical Drilling, Milling, and Turning C
              Brother Speedio M140X2 5-axis CNC Vertical Drilling, Milling, and Turning Center SPECIFICATIONS: Maximum Spindle Speed 16,000 RPM Travels: X-axis 7.9” (200mm) Travels: Y-axis 17.3” (440mm) Travels: Z-axis 12” (305
              Brother Speedio M140X2 5-axis CNC Vertical Drilling, Milling, and Turning
              $RFQ
              Brother Speedio M140X2 5-axis CNC Vertical Drilling, Milling, and Turning
              Brother Speedio M140X2 5-axis CNC Vertical Drilling, Milling, and Turning Center SPECIFICATIONS: Maximum Spindle Speed 16,000 RPM Travels: X-axis 7.9” (200mm) Travels: Y-axis 17.3” (440mm) Travels: Z-axis 12” (305
              Brother Speedio M140X2 5-axis CNC Vertical Drilling, Milling, and Turning
              $RFQ
              Brother Speedio M140X2 5-axis CNC Vertical Drilling, Milling, and Turning
              Brother Speedio M140X2 5-axis CNC Vertical Drilling, Milling, and Turning Center SPECIFICATIONS: Maximum Spindle Speed 16,000 RPM Travels: X-axis 7.9” (200mm) Travels: Y-axis 17.3” (440mm) Travels: Z-axis 12” (305
              ULTRASONIC BATH ELECTRIC CABINET ULTRASONIC BATH LAUNDROMAT
              $RFQ
              ULTRASONIC BATH ELECTRIC CABINET ULTRASONIC BATH LAUNDROMAT
              ULTRASONIC BATH ELECTRIC CABINET ULTRASONIC BATH LAUNDROMAT ACCESSORIES ULTRASONIC BATH U42856
              Gould & Eberhardt Model 36H Universal Vertical Gear Hobber
              $RFQ
              Gould & Eberhardt Model 36H Universal Vertical Gear Hobber
              SPECIFICATIONS: Rated Pitch in Steel, Maximum 3 DP Face Capacity-Spur 15” Face Capacity-45° Helical Gear 12” Max. Diameter Spur Gear-w/o Support 36” Max. Diameter Spur Gear w/Support 24” Max Diameter 45°
              Gould & Eberhardt Model 48H Universal Vertical Gear Hobber
              $RFQ
              Gould & Eberhardt Model 48H Universal Vertical Gear Hobber
              SPECIFICATIONS: Rated Pitch in Steel, Maximum 2.5 DP Face Capacity-Spur 16” Face Capacity-45° Helical Gear 12” Max. Diameter Spur Gear-w/o Support 48” Max. Diameter Spur Gear w/Support 32” Max Diameter 45°
              6’ x 15’ Messer MM Plus Metal Master Slagger CNC Plasma Cutting Machine
              $RFQ
              6’ x 15’ Messer MM Plus Metal Master Slagger CNC Plasma Cutting Machine
              SPECIFICATIONS: Cutting Width 6’ Cutting Length 15’ Plasma Power 260 AMP EQUIPPED WITH: 2019 Messer Global Control and IPC Upgrade. Hypertherm 260 Plasma Power Supply. Messer DFT-12 Down Draft Table. Slagger Scrap
              1996 Amada Vipros 367
              $RFQ
              1996 Amada Vipros 367
              Model: Amada Vipros 367 Tonnage: 33 Table Size: 60" x 72" Max Sheet Thickness: .250 Mild Steel Max Hole Diameter: 4.5" Max Sheet Size W/Reposition: 60” X 144” Reposition: Yes Turret: 58 Station 2 Au
              • Tonnage: 33T
                40T Greenerd HCA-40-30R, 0-24" Strk, 36" DLO, 15" Thrt, 26&q
                $RFQ
                40T Greenerd HCA-40-30R, 0-24" Strk, 36" DLO, 15" Thrt, 26&q
                New - 2002 Serial No. 02T6178 SPECIFICATIONS: Tonnage............40 Bed area............26"(L-R) x 15"(F-B) Bed bolster - T-slotted............32"(L-R) x 16"(F-B) x 2"(T) 4-Post guided sl
                40T King Shang Yuan KSY400, 10" Stroke, 16" DLO, 23"x18"
                $RFQ
                40T King Shang Yuan KSY400, 10" Stroke, 16" DLO, 23"x18"
                New - 2007 Serial No. 06114 SPECIFICATIONS: Bed area - approximate............23" L-R x 18" F-B (T-slotted) 4-Post guided slide - approximate............16" L-R x 10" F-B (T-slotted) Stroke -
                40T King Shang Yuan KSY400, 10" Stroke, 16" DLO, 23"x18&quo
                $RFQ
                40T King Shang Yuan KSY400, 10" Stroke, 16" DLO, 23"x18&quo
                New - 2007 Serial No. 06113 SPECIFICATIONS: Bed area - approximate............23" L-R x 18" F-B (T-slotted) 4-Post guided slide - approximate............16" L-R x 10" F-B (T-slotted) Action...
                33"W x 28"D x 60"H TPS Lunaire CEO932-4, Temp & Humidity
                $RFQ
                33"W x 28"D x 60"H TPS Lunaire CEO932-4, Temp & Humidity
                New - 2007 Serial No. 0802000017 SPECIFICATIONS: Capacity............32 CuFt Work space............33"W x 28"D x 60"H Temperature: - Range............0°C - 99°C - Control - after stabili
                AgieCharmilles Drill 20, 11.8"x15.7"Tbl, 11.8"X, 7.8"Y,
                $RFQ
                AgieCharmilles Drill 20, 11.8"x15.7"Tbl, 11.8"X, 7.8"Y,
                New - 2011 SPECIFICATIONS: Electrode Diameter...........0.004 - 0.12" Maximum Drilling Depth...........7.78" Maximum Workpiece Weight...........660 lbs. Travel Paths: X-Axis...........11.8" Y-Axi
                2007 Amada EMK3510NT Punching Cell
                $RFQ
                2007 Amada EMK3510NT Punching Cell
                Amada high production punching system with 6 shelf load system and 5 shelf unload with part stacking for unmanned operation with job scheduling Model: Amada EMK3510NT Punching Cell Tonnage: 33 Table Size: 50” X 100
                • Tonnage: 33T
                  2019 BPI CF1250 Cartoning System w/ Glue Sealer RTR#5033055-01
                  $23,000
                  2019 BPI CF1250 Cartoning System w/ Glue Sealer RTR#5033055-01
                  Equipment located in O’Fallon, MO. 2019 BPI CF1250 Cartoning System, To Include: (1) Carton Forming Machine w/ (1) Robatech Concept Hot Glue Applicator All equipment is sold “As Is, Where Is”. Reasonable offers will b
                  2023 Spark Robotic 4' x 8' RTR 84 CNC Router RTR#5033693-01
                  $10,500
                  2023 Spark Robotic 4' x 8' RTR 84 CNC Router RTR#5033693-01
                  Equipment located in O’Fallon, MO. 2023 Spark Robotic 4' x 8' RTR 84 CNC Router Kit, to include: (1) Heavy Duty Z Axis w/ 4.8hp Spindle, (1) Vacuum Table, (1) Vacuum Pump, (1) Rikon 1hp Dust Collector All equip
                  2022 Bobcat S770 Skid Steer RTR#5021213-01
                  $35,500
                  2022 Bobcat S770 Skid Steer RTR#5021213-01
                  Unit located in Riverside, CA. 2022 Bobcat S770 Skid Steer, Kubota V3800 Turbo Diesel Engine, Hyd Transmission, Power Steering, Brakes, A/C, Heater, Hour Meter Reads: 1,469 (Unverified), S/N: AT5A17950 All equipment is
                  Despatch 48"W x 42"H x 30"L, 850F Class A Solvents
                  $RFQ
                  Despatch 48"W x 42"H x 30"L, 850F Class A Solvents
                  High temperature cabinet oven model VRE2-35-1, 48"W x 42"H x 30"L work area, 850F, horizontal air-flow, Eurotherm 2704 programmable temperature control, chart recorder, 480V, 3PH, 42KW, SCR element power c
                  • Chamber width: 48"
                  • Chamber length: 30"
                    2024 SKA FAB Can-I-Bus Depalletizer w/ Conveyor RTR#5031584-01
                    $20,000
                    2024 SKA FAB Can-I-Bus Depalletizer w/ Conveyor RTR#5031584-01
                    Equipment located in Salem, OR. 2024 SKA FAB Can-I-Bus (Base Trim) Can Depalletizer w/ 2023 SKA FAB Mini S-Grip Conveyor, 200v-240v, Lifting Capacity: 300 lbs., S/N: 0420-876 All equipment is sold “As Is, Where Is”. R
                    1998 - 90 Ton x 8' Cincinnati 90CB2x6 Hydraulic Press Brake
                    $RFQ
                    1998 - 90 Ton x 8' Cincinnati 90CB2x6 Hydraulic Press Brake
                    Capacity 90 Tons Bed Length 96" Distance Between Housings 72" Stroke 14" (Extended) Open Height 15" Closed Height 7" Throat 7" Bending Capacity 5' x 1/4", 6'8" x 3/1
                    • Tonnage: 90T
                      2014 - 22 Ton Amada AE-2510NT CNC Servo Driven Turret Punch
                      $RFQ
                      2014 - 22 Ton Amada AE-2510NT CNC Servo Driven Turret Punch
                      Capacity 22 Tons Max Sheet Size 50" x 196" Throat Depth 50" Travels X Axis 100" Travels Y Axis 50" Stroke 1.45" Turret Style Thick X Axis Speed 3950"/ min Y Axis Speed 3150"
                      • Tonnage: 22T
                        Matsuura H.Plus 630 CNC Horizontal Machining Center
                        $RFQ
                        Matsuura H.Plus 630 CNC Horizontal Machining Center
                        Matsuura H.Plus 630 CNC Horizontal Machining Center Year of Mfg: 2007 Hours as of Apr. 2025: Power On: 55,458 (New Spindle in 2023, 2,000 hours since install) CNC Control: Matsuura G-Tech 30i Pallet Are
                        • X axis: 41.33"
                        • Y axis: 36.22"
                          Jointer 6" 3/4hp Rockwell
                          $499
                          Jointer 6" 3/4hp Rockwell
                          Jointer 6" 3/4hp Rockwell Model: 37-600 [Rockwell] S/N: 12828 6" Jointer Open Stand 3/4Hp; 1Ph; 115/230Volt
                          Band Saw 14" OS w/Fence Rockwl
                          $599
                          Band Saw 14" OS w/Fence Rockwl
                          Band Saw 14" OS w/Fence Rockwl Model: 28-200 [Rockwell] S/N: KX1510 14" Open Stand Band Saw w/Fence 3/4Hp; 1Ph; 115/230Volt
                          Cont Saw 10" RT 24" Fnc Delta
                          $699
                          Cont Saw 10" RT 24" Fnc Delta
                          Cont Saw 10" RT 24" Fnc Delta Model: 34-444 [Delta] S/N: 94C96718 Right Tilt w/24" Fence; Mobile Base; Miter Gauge 1-1/2Hp; 1Ph; 115/230Volt
                          2020 - 3,000 Watt Amada ENSIS 3015-AJ Fiber Laser
                          $RFQ
                          2020 - 3,000 Watt Amada ENSIS 3015-AJ Fiber Laser
                          Resonator Wattage 3000 Watts Table Size 5' x 10' Max Sheet Size 60" x 120" Travels X Axis 121" Travels Y Axis 61" Travels Z Axis 3.93" Max Positioning Speeds 4,724"/ Min. Max
                          • Wattage: 3000W
                          • X axis travel: 10'
                            Est. 2023 Wacker Neuson SM60 Compact Track Load RTR#5014297-01
                            $18,000
                            Est. 2023 Wacker Neuson SM60 Compact Track Load RTR#5014297-01
                            Unit located in Thomaston, GA. Est. 2023 Wacker Neuson SM60 Stand-On Compact Track Loader, Hour Meter Reads: 64.9 (Unverified), S/N: WNMU0103LM0000620 All equipment is sold “As Is, Where Is”. Reasonable offers will be
                            (MUST GO ASAP) Griggio GB 4/8 Edgebander
                            $5,000
                            (MUST GO ASAP) Griggio GB 4/8 Edgebander
                            We’re selling our Griggio GB4/8 edgebander — available immediately. It’s still in production and still produces quality edges for our high-end clientele. This is a solid machine and priced to move quickly ASAP (our new m
                            Milltronics MB20, 54" x 16", 40"X, 20"Y, 24"Z, 60
                            $RFQ
                            Milltronics MB20, 54" x 16", 40"X, 20"Y, 24"Z, 60
                            Serial No. 12965 Year Built - 2015 CATALOG SPECIFICATIONS: Table: - Size............54" x 16" - Weight Capacity............2,500 Lbs. Travels: - Table - X-axis............40" - Saddle - Y-axis...
                            7/32" x 6' WDM 400-6-6, 4-Roll Hardened, Dbl. Pinch, Hydraulic, 5H
                            $RFQ
                            7/32" x 6' WDM 400-6-6, 4-Roll Hardened, Dbl. Pinch, Hydraulic, 5H
                            Serial No. 60590-00 CATALOG SPECIFICATIONS: Rated capacity............7/32"T x 6'L Nominal roll diameter............6" Rolls: - Quantity............4 - Top............6-3/8" - Bottom (3)......
                            3.5" x 3.5" x 3/8" Roundo R4 Angle Bending Roll, Under Power
                            $37,500
                            3.5" x 3.5" x 3/8" Roundo R4 Angle Bending Roll, Under Power
                            . We are pleased to offer for your consideration: (1) 3.5" x 3.5" x 3/8" Roundo Angle Bending Roll Stock Number: 13970 List Price: $37,500 Manufacturer: Roundo Model Number: R-4 Serial Numbe
                            • Length: 3.5"
                            • Width: 0.375"
                              Sparkie II Mini Fusion Welder, Capacitive Discharge, 110V, 1 Phase
                              $RFQ
                              Sparkie II Mini Fusion Welder, Capacitive Discharge, 110V, 1 Phase
                              SPARKIE ii Mini Fusion Welder. Fusion welding has been a mainstay in the jewelry industry for many years. Fusion provides a fast, clean bond between similar and dissimilar metals when using fusion findings. Low temperatu
                              4 Ton Dunkes DF 2, 7.87" Throat, 4.72" Stroke, 0.02mm Graduations
                              $RFQ
                              4 Ton Dunkes DF 2, 7.87" Throat, 4.72" Stroke, 0.02mm Graduations
                              Serial No. P98-7520 SPECIFICATIONS: Pressing Force - Maximum............4 Tons Throat............7.87" Stroke............4.72" Graduations on Stroke Adjustment Thimble............0.02mm Air Requirement.
                              16" DoAll 1612-0, 3/4" Blade, 12" Work Height, Variable Spee
                              $RFQ
                              16" DoAll 1612-0, 3/4" Blade, 12" Work Height, Variable Spee
                              Year Built - 1968 Serial No. 277-68215 SPECIFICATIONS: Throat Size............16" Work Height - Maximum............12" Infinitely Variable Band Speeds - (2) Ranges............50-300 and 850-5,200 FPM Ba
                              Orotig Speedcast 220M, 3.34"Ø Casting Ring, 3.3kW, 150g Capacity,
                              $RFQ
                              Orotig Speedcast 220M, 3.34"Ø Casting Ring, 3.3kW, 150g Capacity,
                              Serial No. SC2200590906 Year Built - 2006 SPECIFICATIONS: Quantity of Metal/Alloy that can be melted............150 g Diameter of Casting Ring - Maximum............3.34" (85mm) Power Absorbed when Melting - M
                              14" x 40" Enterprise EL-2, 1.5" Bore, 8" 3-Jaw Chuck, I
                              $RFQ
                              14" x 40" Enterprise EL-2, 1.5" Bore, 8" 3-Jaw Chuck, I
                              Serial No. 1731 SPECIFICATIONS: Swing Over Bed............14" Swing Over Cross Slide............9" Distance Between Centers............40" Bore Diameter............1.5" Spindle: - # of Speed
                              6" x 12" Mitsui MSG-200MH, Hand Feed, Perm-Mag Chuck, Lube System
                              $RFQ
                              6" x 12" Mitsui MSG-200MH, Hand Feed, Perm-Mag Chuck, Lube System
                              New - 1984 Serial No. 84045073 SPECIFICATIONS: Work Surface of Table............6" x 12" Max. Longitudinal Table Travel............18" Max. Cross Table Travel............8" Max. Height from Ce
                              Feeler FTL-618E, 11" x 18", Inch Threading, 1.25" Bore, 5&qu
                              $RFQ
                              Feeler FTL-618E, 11" x 18", Inch Threading, 1.25" Bore, 5&qu
                              Year Built - 2004 Serial No. 8E109 SPECIFICATIONS: Swing Over Bed............11" Swing Over Cross Slide............6-1/2" Swing Over Carriage............9" Distance Between Centers............18&qu
                              2.9 CuFt OTEC DF70 Drag Finisher, 7"Dia x 9.8"H Part Cap, Wet, Au
                              $RFQ
                              2.9 CuFt OTEC DF70 Drag Finisher, 7"Dia x 9.8"H Part Cap, Wet, Au
                              Year Built - 2006 Serial No. 70/06 0230 SPECIFICATIONS: Process Container (Drum): - Volume............22 Gals. (2.9 CuFt) - Immersion depth - maximum............9.8" - Media fill height (dry) - approximate..
                              2.9 CuFt OTEC DF70 Drag Finisher, 7"Dia x 9.8"H Part Cap, Wet or
                              $RFQ
                              2.9 CuFt OTEC DF70 Drag Finisher, 7"Dia x 9.8"H Part Cap, Wet or
                              Year Built - 2002 Serial No. 70W/02 0001 SPECIFICATIONS: Process Container (Drum): - Volume............22 Gals. (2.9 CuFt) - Immersion depth - maximum............9.8" - Media fill height (dry) - approximate.
                              Hotsy 5735SS, 7.8 GPM, 3000 PSI, NG Heat, Wand, Hose, 2018
                              $RFQ
                              Hotsy 5735SS, 7.8 GPM, 3000 PSI, NG Heat, Wand, Hose, 2018
                              Serial No. 11096560-100465 Hours: 30.9 Year Built- 2018 SPECIFICATIONS: Capacity............8.0 GPM Pressure............3,000 PSI Pump motor: - Power............20 HP - Electrics............460V/21A Heater: -
                              Est. 2023 Biesse Rover A 1232 CNC w/ Vac Pump RTR#5033976-01
                              $48,000
                              Est. 2023 Biesse Rover A 1232 CNC w/ Vac Pump RTR#5033976-01
                              Equipment located in Raleigh, NC. Est. 2023 Biesse Rover A 1232 CNC Machining Center, S/N: 1000057815 w/ Busch Vacuum Pump S/N: DEM122410256 All equipment is sold “As Is, Where Is”. Reasonable offers will be considere
                              Griffin Iron Werks Press Brake 10' 6" RTR#5023614-02
                              $5,000
                              Griffin Iron Werks Press Brake 10' 6" RTR#5023614-02
                              Equipment located in Raleigh, NC. Griffin Iron Werks Press Brake 10' 6" Model: MG 1000, S/N: 202203 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be inspected by appoin
                              Griffin Iron Werks AG Roof Panel Machine RTR#5023614-01
                              $20,000
                              Griffin Iron Werks AG Roof Panel Machine RTR#5023614-01
                              Unit located in Raleigh, NC. Griffin Iron Werks 13 Stand AG Roof Panel Machine 26 & 29 Gauge, S/N: 202101, With 5 Ton Auto Decoiler w/Cart All equipment is sold “As Is, Where Is”. Reasonable offers will be conside
                              Engis SPM Series, 6-Spdl, 8-Pos Rotary Tbl, 0.060" - 1.5" Range,
                              $RFQ
                              Engis SPM Series, 6-Spdl, 8-Pos Rotary Tbl, 0.060" - 1.5" Range,
                              Serial No. 2000122 New - 2002 SPECIFICATIONS: Dial Plate Diameter (Pneumatic Index)............20" Number of Index Stations............8 Able to Process............1-2 Parts/Cycle Single Column Design.......
                              2022 ASV RT-135F Posi-Track Skid Steer RTR#4103176-01
                              $85,000
                              2022 ASV RT-135F Posi-Track Skid Steer RTR#4103176-01
                              Unit located in Pawleys Island, SC. 2022 ASV RT-135F Posi-Track Skid Steer, Cummins Diesel Engine, Hyd Tansmission, Enclosed Cab, A/C, Heater, AM/FM Radio, Hour Meter Reads: 1,007 (Unverified), S/N: ASVRT135LNDF00154 A
                              11.8" Sw x 25.6" CC, Jones & Shipman Suprema 650 Easy M, 3-Wh
                              $RFQ
                              11.8" Sw x 25.6" CC, Jones & Shipman Suprema 650 Easy M, 3-Wh
                              New - 2015 SPECIFICATIONS: Capacities: - Grinding length............25.6" - Swing............11.8" - Weight between centers - maximum............220 Lbs. Table: - Traverse distance............29.5"
                              Sunnen KGM-5000-E, Kross-Grinding, 0.153" - 1.260" Ø Cap., 0
                              $RFQ
                              Sunnen KGM-5000-E, Kross-Grinding, 0.153" - 1.260" Ø Cap., 0
                              Serial No. 3A1-1015 Year - 2002 SPECIFICATIONS: Diameter Range - (I.D.)............0.153" - 1.260" (3.89 - 32 mm) Workpiece Length Range............0.31" - 6" (8 - 150 mm) Workpiece Weight - Ma
                              Barrett 301-E "Spintech", 75 Lb. Load Cap,(6) Baskets, AC Vari Sp
                              $RFQ
                              Barrett 301-E "Spintech", 75 Lb. Load Cap,(6) Baskets, AC Vari Sp
                              New - 2005 Serial No. 3010135-E/SES SPECIFICATIONS: Load Capacity............75 Lbs. Liquid Capacity............5 Gals. Speed Infinitely Variable (AC Drive) to............1200 RPM G-Rating - Maximum............32
                              11" x 18" Hardinge HLV-H, Inch Thrd, Taper, 5C Collet, Compound C
                              $RFQ
                              11" x 18" Hardinge HLV-H, Inch Thrd, Taper, 5C Collet, Compound C
                              Serial No. HLVH-8676T New - 1990 Motor driven with 2-Speed, 3/60/230 volt variable speed drive unit with direct reading spindle speed indicator and controls. Hardinge Super-Precision ball bearing spindle. Hardinge ta
                              11" x 18" Hardinge HLV-H, Inch Thrd, Taper, 5C Collet, Compound C
                              $RFQ
                              11" x 18" Hardinge HLV-H, Inch Thrd, Taper, 5C Collet, Compound C
                              Serial No. HLV-H-11377T Year Built – 1993 Motor driven with 2-Speed, 3Ph/60Hz/460 volt variable speed drive unit with direct reading spindle speed indicator and controls. Hardinge Super-Precision ball bearing spindle
                              230-10 Cincinnati Twin Grip, 1/4" - 4"Ø Cap, 30 HP, 10"
                              $RFQ
                              230-10 Cincinnati Twin Grip, 1/4" - 4"Ø Cap, 30 HP, 10"
                              Serial No. 350800081-0006 SPECIFICATIONS: Capacity............1/4" - 4" dia. Wheels: - Grinding - widths up to 10", 12" hole.............24" dia. - Regulating - widths up to 10",
                              Dust Collector 1hp 30mic Delta
                              $349
                              Dust Collector 1hp 30mic Delta
                              Dust Collector 1hp 30mic Delta Model: AP400 [Delta] S/N: 200802XL002302 30 Micron Dust Collector 1Hp; 1Ph; 120/240Volt
                              • Motor: 1HP
                                Drill Press 17" FM 16Sp CM
                                $349
                                Drill Press 17" FM 16Sp CM
                                Drill Press 17" FM 16Sp CM Model: 43389 [Central Machinery] S/N: 0511040061 17" Floor Mount 16 Speed Drill Press 1Hp; 1Ph; 120Volt
                                1998 Fadal VMC-5020AHT
                                $RFQ
                                1998 Fadal VMC-5020AHT
                                1998 Fadal VMC-5020AHT S|N 9803755 SPECIFICATIONS Max X-Axis Travel: 50" Max Y-Axis Travel: 20" Max Z-Axis Travel: 28" Rapid Traverse Rates: 800 Ip High Torque Spindle Motor Option 22.5 Hp 7
                                2021 Grizzly G0895 4' x 8' CNC Router RTR#5021130-02
                                $8,500
                                2021 Grizzly G0895 4' x 8' CNC Router RTR#5021130-02
                                Equipment located in Phoenix, AZ. 2021 Grizzly G0895 4' x 8' CNC Router, 6 HP, 1 Ph, 30 A, 15 Piece Spring Collet Set w/ Oak Collet Chest, S/N: 202110GZ0129 All equipment is sold “As Is, Where Is”. Reasonable
                                2021 Grizzly 10" Sliding Table Saw RTR#5021130-01
                                $2,100
                                2021 Grizzly 10" Sliding Table Saw RTR#5021130-01
                                Equipment located in Phoenix, AZ. 2021 Grizzly G0623X 10" Sliding Table Saw 5 HP, 1 PH Multi-Box S/N: 21120317 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be inspected by
                                22"/31" x 120" Acra 22120, 19.5" 4-Jaw Ck, 4"Bore,
                                $RFQ
                                22"/31" x 120" Acra 22120, 19.5" 4-Jaw Ck, 4"Bore,
                                Serial No. CH08824 Year Built - 2007 CATALOG SPECIFICATIONS: Swing: - Over bed............22" - Over cross slide............13-3/8" - In gap............31-3/8" Distance between centers............
                                2021 Harben E-180 Sewer Jetter S/A Trailer RTR#5013684-02
                                $31,500
                                2021 Harben E-180 Sewer Jetter S/A Trailer RTR#5013684-02
                                Unit located in Tampa, FL. 2021 Harben E-180 Sewer Jetter S/A Trailer, 4000 PSI, 18 GPM, Diesel Engine, 375 Gallon Tank, Hour Meter Reads: 283 (Unverified), VIN: 1H9X11511MC122074 All equipment is sold “As Is, Where Is
                                2021 Harben E-180 Sewer Jetter S/A Trailer RTR#5013684-01
                                $26,500
                                2021 Harben E-180 Sewer Jetter S/A Trailer RTR#5013684-01
                                Unit located in Tampa, FL. 2021 Harben E-180 Sewer Jetter S/A Trailer, 4000 PSI, 18 GPM, Diesel Engine, 375 Gallon Tank, Hour Meter Reads: 311 (Unverified), VIN: 1H9X1151XMC122073 All equipment is sold “As Is, Where Is
                                130 Ton Accurpress Press Brake, ETS3000 CNC, Wila Crowning/Clamping
                                $RFQ
                                130 Ton Accurpress Press Brake, ETS3000 CNC, Wila Crowning/Clamping
                                . We are pleased to offer for your consideration: (1) 130 ton Accurpress Hydraulic CNC Press Brake Stock Number: 13987 List Price: On Request Manufacturer: Accurpress Model Number: 713010 Serial Number: 715
                                • Tonnage: 130T
                                  Haas VF-3 VMC, 2011 – Side-Mount ATC, High Speed Machining, 15k Spindle
                                  $RFQ
                                  Haas VF-3 VMC, 2011 – Side-Mount ATC, High Speed Machining, 15k Spindle
                                  Haas VF-3 VMC, 2011 – Side-Mount ATC, High Speed Machining, 15k Spindle Table Size 48″ X 18″ Maximum Table Load Capacity 3500 Lbs. Spindle Nose to Table Top 4″ – 29″ X – Axis Travel 40″ Y – Axis Travel 20″ Z – Axis
                                  Haas VF-3 VMC, 2011 – Side-Mount ATC, High Speed Machining, 15k Spindle
                                  $RFQ
                                  Haas VF-3 VMC, 2011 – Side-Mount ATC, High Speed Machining, 15k Spindle
                                  Haas VF-3 VMC, 2011 – Side-Mount ATC, High Speed Machining, 15k Spindle Table Size 48″ X 18″ Maximum Table Load Capacity 3500 Lbs. Spindle Nose to Table Top 4″ – 29″ X – Axis Travel 40″ Y – Axis Travel 20″ Z – Axis
                                  Cincinnati 750HS 3/4" x 10' Hydraulic Plate Shear
                                  $RFQ
                                  Cincinnati 750HS 3/4" x 10' Hydraulic Plate Shear
                                  Cincinnati 750HS 3/4" x 10' Hydraulic Plate Shear Year of Mfg: 1983 Mild Steel Capacity: 3/4" Cutting Length: 122.5" Max. Rake (in./ft.): 3/4" Holddown Force Tons: 32.3 Number o
                                  • Maximum thickness: 0.75"
                                  • Cutting length: 122.5"
                                    1992 - 33 Ton Amada Pega 357 CNC Turret Punch
                                    $RFQ
                                    1992 - 33 Ton Amada Pega 357 CNC Turret Punch
                                    Capacity 33 Tons Maximum Sheet Size 50"X70" (50"X144" with repo) Maximum Punching Capacity 1/4" Maximum Hole Size (10 gauge) 3.5" Maximum Hole Size (1/4") 1.6" Rapid Feedrates
                                    • Tonnage: 33T
                                      6 ton x 18" Haeger HP6-B Hardware Insertion Press
                                      $RFQ
                                      6 ton x 18" Haeger HP6-B Hardware Insertion Press
                                      Capacity 6 Tons Throat Depth 18" RAM Adjustment 3/8" - 8.5" Max Workable Tool Depth 12" RAM Pressure 200 - 12,000 lbs. Overall Dimensions (approx.) 36 x 30 x 67"H Weight (approx) 1,000 lbs.
                                      • Tonnage: 6T
                                      • Throat: 18"
                                        Categories:
                                        Condition:
                                        Manufacturer:
                                        Location:
                                        Price:
                                        •  to 
                                        1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>