buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 51 - 100 of 20763 matches
Sort by:
Items Per Page:  20 |  50  |  100
1990 - 33 Ton Amada Pega 357 CNC Turret Punch
$RFQ
1990 - 33 Ton Amada Pega 357 CNC Turret Punch
Capacity 33 Tons Maximum Sheet Size 50"X70" (50"X144" with repo) Maximum Punching Capacity 1/4" Maximum Hole Size (10 gauge) 3.5" Maximum Hole Size (1/4") 1.6" Rapid Feedrates
  • Tonnage: 33T
    2019 Case TR310 Compact Track Loader w/ Bucket RTR#5073483-01
    $25,000
    2019 Case TR310 Compact Track Loader w/ Bucket RTR#5073483-01
    Unit located in San Antonio, TX. 2019 Case TR310 Compact Track Loader w/ 68" Bucket, F5H Diesel Engine, Hyd Transmission, Open Cab, Hour Meter Reads: 1,421 (Unverified), S/N: NKM474879 All equipment is sold “As Is
    2016 - 242 Ton x 14' Amada HG-2204 CNC Press Brake
    $RFQ
    2016 - 242 Ton x 14' Amada HG-2204 CNC Press Brake
    Capacity 242 Tons Max Bending Length 169.3" Distance Between End Frames 148" Length of Stroke 9.8" Open Height 20.5" (no holders) Throat Depth 17.7" Table Height 37.4" Approach Speed
    • Tonnage: 242T
      1998 - 33 Ton Amada Vipros 368 King CNC Turret Punch
      $RFQ
      1998 - 33 Ton Amada Vipros 368 King CNC Turret Punch
      Capacity 33 Ton Max Sheet Size 60" x 80" (60" x 160" w/Repo) Turret Speed 25 RPM X and Y Axis Travels 60" x 78.7" Throat Depth 60" Max Hole Diameter 4.5" Hits per Minute 200
      • Tonnage: 33T
        Steelman Walk-in 6'W x 7'H x 12', Class A, 500F
        $RFQ
        Steelman Walk-in 6'W x 7'H x 12', Class A, 500F
        Steelman walk-in oven model 6712 EPC, 72"W x 84"H x 144"L work area, 500F, aluminized steel interior, insulated floor with wheel guide channels, combination air-flow (5HP fan), electric heated, 480V, 3PH,
        • Chamber width: 72"
        • Chamber length: 144"
          Drill Press 20" FM Craftsman
          $799
          Drill Press 20" FM Craftsman
          Drill Press 20" FM Craftsman Model: 137.229200 [Craftsman] S/N: RFP3099 20" Floor Model w/Custom Table, Mobile Base, Fence, 3/4" Chuck; 12 Speed 2Hp; 1Ph; 120Volt
          Dust Collector 1hp 5Micron Jet
          $399
          Dust Collector 1hp 5Micron Jet
          Dust Collector 1hp 5Micron Jet Model: 708621P DC650 [Jet] S/N: 90905127 5 Micron Dust Collector 1Hp; 1Ph; 115/230Volt
          • Motor: 1HP
            Planer 15" 3/1 C/S - Jet
            $1,699
            Planer 15" 3/1 C/S - Jet
            Planer 15" 3/1 C/S - Jet Model: 708529R JWP15CS [Jet] S/N: 9094653 15" Planer 3Hp; 1Ph; 230Volt
            40"W x 39"D x 46"H Thermotron SE-1200-5-5-S, Temp & Humi
            $RFQ
            40"W x 39"D x 46"H Thermotron SE-1200-5-5-S, Temp & Humi
            New - 2000 Serial No. 30881 CATALOG SPECIFICATIONS: Volume............42 Cubic Feet Interior Dimensions............40"W X 39"D X 46"H Temperature Range............-70 to +180 Celcius Humidity Range
            25"W x 15"D x 15"H Thermotron ATS-320-DD-10-705, Hot to 200C
            $RFQ
            25"W x 15"D x 15"H Thermotron ATS-320-DD-10-705, Hot to 200C
            Thermotron thermal shock chamber Double Duty model ATS-320-DD has a cold zone positioned between two hot zones, aligned vertically top and bottom. Products under test are placed in one of two product carriers and transfe
            24”W x 24”D x 24”H Thermotron S-8C, Temperature, -68°C to +177°C
            $RFQ
            24”W x 24”D x 24”H Thermotron S-8C, Temperature, -68°C to +177°C
            New - 1994 Serial No. 23848 SPECIFICATIONS: Workspace Volume............8 CuFt Workspace Dimensions (WxDxH)............24” x 24” x 24” Temperature Control Tolerance............± 0.5°C at steady state con
            24”W x 24”D x 24”H Thermotron S-8C, Temperature, -68°C to +177°C
            $RFQ
            24”W x 24”D x 24”H Thermotron S-8C, Temperature, -68°C to +177°C
            New - 1996 Serial No. 25283 SPECIFICATIONS: Workspace Volume............8 CuFt Workspace Dimensions (WxDxH)............24” x 24” x 24” Temperature Control Tolerance............± 0.5°C at steady state con
            Blue M 25"W x 38"H x 20"L, 662F, stainless int.
            $RFQ
            Blue M 25"W x 38"H x 20"L, 662F, stainless int.
            Blue M SPX cabinet oven model DCW-336-G-F4, 25"W x 38"H x 20"L work area, 662F, type 304 stainless steel interior, horizontal air-flow, Watlow F4 programmable temperature control, solid state relay element
            • Chamber width: 25"
            • Chamber length: 20"
              Rut Manufacturing 36" Mini Excavator Disc Mulch RTR#5053668-03
              $3,000
              Rut Manufacturing 36" Mini Excavator Disc Mulch RTR#5053668-03
              Equipment located in Raleigh, NC. Rut Manufacturing 36" Mini Excavator Disc Mulcher Attachment w/ Coupler, Model: E-MM-36 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be i
              Sunnen SV-10 Cylinder Hone, 9" Stroke, 3/4" - 8" Bore, Sieme
              $RFQ
              Sunnen SV-10 Cylinder Hone, 9" Stroke, 3/4" - 8" Bore, Sieme
              New - 2007 Serial No. 4F1-1189 SPECIFICATIONS: Sunnen Cylinder Hone Length Range: - Standard - Maximum............11" - w/Special Tooling - Maximum............18" Bore Diameter Range............3/4"
              Fanuc α-0iD, 27" x 23" x 10" Part Cap, 14"X, 10"Y,
              $RFQ
              Fanuc α-0iD, 27" x 23" x 10" Part Cap, 14"X, 10"Y,
              Year Built - 2008 Serial No. P082D0280 Type A04B-0319-B001#D5 SPECIFICATIONS: Travels: - X-Axis............14.6" - Y-Axis............10.6" - Z-Axis............10.2" - U/V Axis............2.36&quo
              88T Amada TPL 80SI, 5"Strk, Wet Clutch, 17.9"SH, 40" x 23&qu
              $RFQ
              88T Amada TPL 80SI, 5"Strk, Wet Clutch, 17.9"SH, 40" x 23&qu
              Year Built - 2000 SPECIFICATIONS: Pressing Capacity............88 Tons Stroke............5.1" Shut Height............17.9" Speed............50 - 95 SPM Bolster Area............40.5" x 23.6" B
              8"L x 3"Ø Tru Tech Revolution T93X, 8"Ø Wheel, 3 H
              $RFQ
              8"L x 3"Ø Tru Tech Revolution T93X, 8"Ø Wheel, 3 H
              Year Built - 2016 CATALOG SPECIFICATIONS: Grind Length – Maximum…………8″ Grind Diameter – Maximum…………3″ Grind Diameter – Minimum…………Tooling Dependent X-Axis Travel – Maximum…………16″ Y-Axis Travel – Maximum…………9″
              8" x 18" Mitsui MSG-250H-2AH, 8" x 3/4" Whl, Auto-DwnFd
              $RFQ
              8" x 18" Mitsui MSG-250H-2AH, 8" x 3/4" Whl, Auto-DwnFd
              Serial No. 92023681 Year - 2002 SPECIFICATIONS: Working Surface of Table............8" x 18" Surface Ground - Maximum............9-1/2" x 20" Distance between Table Surface & Spindle Center
              Glebar GT-610G, 8.6"W x 10"Ø Whl, 15HP, Servo Slides & D
              $RFQ
              Glebar GT-610G, 8.6"W x 10"Ø Whl, 15HP, Servo Slides & D
              New - 2017 (Never Put into Production) Serial No. 17-1730 CATALOG SPECIFICATIONS: Grinding capacity............0.002"Ø - 2.0"Ø Work Wheel: - Size............10”Ø x 8.625”W - Speed........
              Walter Helitronic Vision W, 19"X, 12"Y, 27"Z, 200°C-Ax,
              $RFQ
              Walter Helitronic Vision W, 19"X, 12"Y, 27"Z, 200°C-Ax,
              Walter Helitronic Vision-W CNC Tool & Cutter Grinder Year Built - 2011 Cut Time - 30,948 Hours SPECIFICATIONS: X-Axis............18.89" Y-Aixs............12.59" Z-Axis............27.56" Rapid
              United Surface Solutions CPC4000HD, 4 cubic feet, 4 Barrels, 225 RPM, 10HP
              $RFQ
              United Surface Solutions CPC4000HD, 4 cubic feet, 4 Barrels, 225 RPM, 10HP
              United Surface Solutions Model CPC4000HD Fully Automated Centrifugal Barrel Finishing System Year Built - 2019 Installed New - 2021 Serial No. 190802 SPECIFICATIONS: Capacity - Maximum............4 cubic feet B
              16" x 40" Kellenberger 1000U-125, 3-Wheel Design, ID Spindle, Coo
              $RFQ
              16" x 40" Kellenberger 1000U-125, 3-Wheel Design, ID Spindle, Coo
              Serial No. 32462-2429 Year Built - 1990 SPECIFICATIONS: Distance Between Centers............39-3/8" Distance Between Centers w/ Tailstock Overhanging............47-1/4" Height of Centers............7.96&
              Guyson SBP-40, Cyclone Reclaim 75/12, 24"D x 32"W x 19"H Cha
              $RFQ
              Guyson SBP-40, Cyclone Reclaim 75/12, 24"D x 32"W x 19"H Cha
              Year Built - 2003 Serial No. M36010A SPECIFICATIONS: Internal Chamber Size............24"D x 32"W x 19"H Side Door Size............20"W x 9"/17"H Overall Dimensions - Approximate.....
              Guyson SBP-40, Cyclone Reclaim 75/12, 24"D x 32"W x 19"H Cha
              $RFQ
              Guyson SBP-40, Cyclone Reclaim 75/12, 24"D x 32"W x 19"H Cha
              Year Built - 2003 Serial No. M36010 SPECIFICATIONS: Internal Chamber Size............24"D x 32"W x 19"H Side Door Size............20"W x 9"/17"H Overall Dimensions - Approximate......
              Haas Super Mini Mill 2, 40" x 14" Tbl, 20"X, 16"Y, 14&q
              $RFQ
              Haas Super Mini Mill 2, 40" x 14" Tbl, 20"X, 16"Y, 14&q
              New - 2012 Serial No. 1093842 Power On Time - 3772 Hours Cycle Start Time - 1580 Hours Feed Cutting Time - 1371 Hours SPECIFICATIONS: Table Size............40" x 14" Travels: - X-Axis............20&qu
              Haas Super Mini Mill 2, 40" x 14" Tbl, 20"X, 16"Y, 14&q
              $RFQ
              Haas Super Mini Mill 2, 40" x 14" Tbl, 20"X, 16"Y, 14&q
              New - 2012 Serial No. 1094902 SPECIFICATIONS: Table Size............40" x 14" Travels: - X-Axis............20" - Y-Axis............16" - Z-Axis............14" Rapid Feedrate XYZ - Maxim
              Haas Super Mini Mill 2, 40" x 14" Tbl, 20"X, 16"Y, 14&q
              $RFQ
              Haas Super Mini Mill 2, 40" x 14" Tbl, 20"X, 16"Y, 14&q
              New - 2011 Serial No. 1087696 Power On Time - 10214 Hours Cycle Start Time - 390 Hours Feed Cutting Time - 253 Hours SPECIFICATIONS: Table Size............40" x 14" Travels: - X-Axis............20&quo
              16" x 30" Southwestern Industries TRAK 1630HS-SX, SLX Ctrl, 4K RP
              $RFQ
              16" x 30" Southwestern Industries TRAK 1630HS-SX, SLX Ctrl, 4K RP
              Year Built - 2015 SPECIFICATIONS: Height of Centers............8" Swing Over Bed............16" Swing Over Cross Slide............8.6" Swing Over Saddle Wings............16" Distance Between C
              Okuma GENOS M460-VE, 30"X, 18"Y, 18"Z, 25 HP, CAT 40, 32 ATC
              $RFQ
              Okuma GENOS M460-VE, 30"X, 18"Y, 18"Z, 25 HP, CAT 40, 32 ATC
              Year Built - 2010 SPECIFICATIONS: Table Size............39.37" x 18.11" Table Capacity............1,540 Lbs. Travels - Maximum: - X-Axis............30" - Y-Axis............18.11" - Z-Axis...
              Engis LPM-6000, UpTo 6"ID, 6-Spdl +Chamfer, 10-Pos Tbl, Clnt Filt, Mit
              $RFQ
              Engis LPM-6000, UpTo 6"ID, 6-Spdl +Chamfer, 10-Pos Tbl, Clnt Filt, Mit
              New - 2013 Serial No. 2012339 SPECIFICATIONS: Bore diameter range............up to 6" Head travel (Z-Axis) servo feed............25" Spindle nose to table - maximum............29" Able to process.
              Bracker RN-080, 0.15" Cap, 0.08" - 1" Strk, 1640 RPM, 0.12 H
              $RFQ
              Bracker RN-080, 0.15" Cap, 0.08" - 1" Strk, 1640 RPM, 0.12 H
              Serial No. 65568 SPECIFICATIONS: Capacity - Maximum............0.15" Riveting Pressure - Maximum............530 Lbs Riveting Time............0.1 - 5.9 seconds Working Stroke............0.08" - 1.0"
              3 1/2" (89mm) TORRINGTON MODEL 1047 2 DIE ROTARY SWAGING MACHINE (14493)
              $RFQ
              3 1/2" (89mm) TORRINGTON MODEL 1047 2 DIE ROTARY SWAGING MACHINE (14493)
              Capacity, Tubes 3.5 inches Capacity, Solids
              RAFTER TUBE MILL (14539)
              $RFQ
              RAFTER TUBE MILL (14539)
              RAFTER TUBE MILLStock # 14539MANUFACTURER:       RAFTERNUMBER OF STANDS:   4SIZING STANDS:      3DRAWING DIE BOXDRAWING PULL OUT CAPSTAN**T
              14" x 16" STANDARD 2 HIGH ROLLING MILL (14538)
              $RFQ
              14" x 16" STANDARD 2 HIGH ROLLING MILL (14538)
              Max Width Workpiece 16 inches Max Roll Dia.
              8" X 22" X 20" BLISS 4-HIGH ROLLING MILL (14537)
              $RFQ
              8" X 22" X 20" BLISS 4-HIGH ROLLING MILL (14537)
              Max Width Workpiece 20 inches 8" X 22" X 20" BLISS 4 HIGH ROLLING MILLStock # 14537WORK
              12" X 2.625" STANAT S-190 SLITTING LINE W/ SINGLE RECOILER (14536)
              $RFQ
              12" X 2.625" STANAT S-190 SLITTING LINE W/ SINGLE RECOILER (14536)
              Max Width of Workpiece 12 inches 12" X 2.525" STANAT SLITTING LINEStock # 14356Manufact
              Hwacheon HI-TECH 230BL-YSMC CNC Turning Center, 3500 RPM, Live Tooling, 3-Jaw Chuck, 12 Po
              $RFQ
              Hwacheon HI-TECH 230BL-YSMC CNC Turning Center, 3500 RPM, Live Tooling, 3-Jaw Chuck, 12 Po
              CNC Control yes Type of CNC Control Hwac
              GIDDINGS & LEWIS MODEL PC5 CNC HBM WITH SIEMENS 840D CNC CONT, MFG 2003
              $RFQ
              GIDDINGS & LEWIS MODEL PC5 CNC HBM WITH SIEMENS 840D CNC CONT, MFG 2003
              SPECIFICATIONS: SPINDLE SIZE 5.12" X-HORIZ TVL OF TABLE 98.4" Y-VERT TVL OF HEAD 82.7" Z-AXIS TRAVEL 62 in W-SPINDLE TVL. 31.5" SPINDLE TAPER #50 ANSI B5.50 TABLE-W
              • Spindle diameter: 5.12"
              • X axis travel: 98.4"
                2021 Maripak L-Bar Sealer & Heat Tunnel RTR#4073346-01
                $3,500
                2021 Maripak L-Bar Sealer & Heat Tunnel RTR#4073346-01
                Equipment located in Raleigh, NC. 2021 Maripak - LMC Series Semi-Automatic - L-Bar Sealer Model: 80/65 v2, 220v, S/N: 17600, With 2021 Maripak T60-1400 H400 Diamond Heat Tunnel, 220v, S/N: 17299 All equipment is sold “
                TRAK Model VMC2 Vertical Machining Center
                $RFQ
                TRAK Model VMC2 Vertical Machining Center
                TRAK Vertical Machining Center S/N: 211EQ245, Mfg: 2020, Stock No: 87366 Model: VMC2 Table: 18" x 15" Travels: X-Axis 14" Y-Axis 12" Z-Axis 17" Max spindle Speed: 1
                • X axis: 14"
                • Y axis: 12"
                  TRAK Model VMC2 Vertical Machining Center
                  $RFQ
                  TRAK Model VMC2 Vertical Machining Center
                  TRAK Vertical Machining Center S/N: 211EQ199, Mfg: 2020, Stock No: 87365 Model: VMC2 Table: 18" x 15" Travels: X-Axis 14" Y-Axis 12" Z-Axis 17" Max spindle Speed: 1
                  • X axis: 14"
                  • Y axis: 12"
                    TRAK Model VMC2 Vertical Machining Center
                    $RFQ
                    TRAK Model VMC2 Vertical Machining Center
                    TRAK Vertical Machining Center S/N: 211EQ199, Mfg: 2020, Stock No: 87365 Model: VMC2 Table: 18" x 15" Travels: X-Axis 14" Y-Axis 12" Z-Axis 17" Max spindle Speed: 1
                    • X axis: 14"
                    • Y axis: 12"
                      1989 - 60 Ton x 6' Accurpress 7606 Hydraulic Press Brake
                      $RFQ
                      1989 - 60 Ton x 6' Accurpress 7606 Hydraulic Press Brake
                      Capacity 60 Tons Overall Bending Length 72" Distance Between Housings 52" Stroke 8" Throat Depth 8" Open Height 14" Closed Height 6" Power Requirements 230v / 3ph Main Motor 10 HP F
                      • Tonnage: 60T
                        Blue M Truck type 36" x 48"H x 36", 600F 480V.
                        $RFQ
                        Blue M Truck type 36" x 48"H x 36", 600F 480V.
                        Model DC-366-G-PM, 36"W x 48"H x 36"L work area, 600F, horizontal air-flow, type 304 stainless interior, insulated floor with wheel guide channels, (10) shelf supports with (4) removable shelves included,
                        • Chamber width: 36"
                        • Chamber length: 36"
                          Harrop 24" x 30"H x 24", cooling blower, 2200F 480V
                          $RFQ
                          Harrop 24" x 30"H x 24", cooling blower, 2200F 480V
                          Harrop refractory lined box furnace/kiln model MR-BG-24/30/24,  24"W x 30"H x 24"L work area, 2200F, single side-swing door, colied heating elements on side-walls, rear wall, door and floor, Honeywell
                          • Chamber width: 24"
                          • Chamber length: 24"
                            Harrop 24" x 30"H x 24", cooling blower, 2200F 480V
                            $RFQ
                            Harrop 24" x 30"H x 24", cooling blower, 2200F 480V
                            Harrop refractory lined box furnace/kiln model MR-BG-24/30/24,  24"W x 30"H x 24"L work area, 2200F, single side-swing door, colied heating elements on side-walls, rear wall, door and floor, Honeywell
                            • Chamber width: 24"
                            • Chamber length: 24"
                              2024 Pallet Chief Ill Nailer w/ Stacker RTR#5073998-01
                              $45,000
                              2024 Pallet Chief Ill Nailer w/ Stacker RTR#5073998-01
                              Equipment located in O’Fallon, MO. 2024 Pallet Chief Ill Nailer w/ Stacker, 4th Stringer Assembly & (4) Everwin PN70PAL Machine-Mounted 70mm (2-3/4") Wire Coil Nailers All equipment is sold “As Is, Where Is”.
                              Pacific 750 Ton Hydraulic Press Brake
                              $RFQ
                              Pacific 750 Ton Hydraulic Press Brake
                              Pacific 750 Ton Hydraulic Press S/N: A1467, Stock No: 87363 Model: 750 OBL 8/48 Maximum Capacity: 750 Tons Punching Capacity: 500 Tons Bed Size: 48" x 102" Distance Between Side Frame: 108" Stroke:
                              • Tonnage: 750T
                                2023 RAS 62.30-2 Turbo 2 Plus Metal Folder RTR#506329-01
                                $42,000
                                2023 RAS 62.30-2 Turbo 2 Plus Metal Folder RTR#506329-01
                                Equipment located in Phoenix, AZ. 2023 RAS 62.30-2 Turbo 2 Plus Metal Folder w/ Additional Related Accessories, S/N: 14352 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be inspe
                                Categories:
                                Condition:
                                Manufacturer:
                                Location:
                                Price:
                                •  to 
                                1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>