Machine Sales – Buy or Sell New and Used Machinery and Machine Tools at Machine Sales

3" Width 3" Stroke Rapid Air C3 PRESS FEED

$950

3" X 3" RAPID AIR SLIDE FEED MODEL C3 S/N 109581 &

Harrison, NJ
View Listing

3" Width 3" Stroke Rapid Air C3 PRESS FEED

$950

3" X 3" RAPID AIR SLIDE FEED MODEL C3 S/N 100122

Harrison, NJ
View Listing

100 KVA x 37" Used Janda Press Type Spot Welder With over $100,000 Upgraded Control S

$34,500

Here is the info on the amazing controller that this machine has been upgraded with. This controller perfoms thousands of checks during the process to ensure peak performance and a high quality weld. https://

South El Monte, CA
View Listing

Mori Seiki SV-503B CNC Vertical Machining Center

$39,600

MORI SEIKI SV-503BCNC VERTICAL MACHINING CENTER SKU: 2277 MAKE: MORI SEIKI MODEL NO.: SV-503B SERIAL NO.: 2570 YEAR : 2000/2001 CONDITION: Very Good CUTTING HOURSN: 9081 Only All specifications are approximat

X axis: 40.16"
Y axis: 20.1"

Chino, CA
View Listing

Haas EC-400 CNC Horizontal Machining Center

$66,600

HAAS EC-400CNC HORIZONTAL MACHINING CENTER MILL SKU: 2296 MAKE: HAAS MODEL NO.: EC-400-4AX SERIAL #51696 YEAR CUTTING TIME: Hours CONDITION: All specifications are approximations and are subject to verificat

X axis: 20"
Y axis: 20"

Chino, CA
View Listing

Doosan Revo 4020 CNC Vertical Machining Center

$36,999

DOOSAN REVO 4020CNC VERTICAL MACHINING CENTER MILL SKU: 2294 MAKE: Doosan MODEL NO.: REVO 4020 SERIAL NO.: 1010 YEAR : 2004/2006 CONDITION: Very Good CUTTING HOURSN: 4410 Only All specifications are approxima

X axis: 40.2"
Y axis: 20.1"

Chino, CA
View Listing

Amada RG-80 CNC Press Brake

$39,600

SKU: 2302 MAKE: AMADA MODEL NO.: RG-80 SERIAL NO.: 810267 YEAR: 1993 CONDITION: Very Good CUTTING HOURS: Only All specifications are approximations and are subject to verification. Comes as shown in the pictures

Tonnage: 80T

Chino, CA
View Listing

Haas GR-712 CNC Gantry Router Bridge Mill

$126,999

HAAS GR-712CNC GANTRY ROUTER BRIDGE MILL SKU: 2299 MAKE: Haas MODEL NO.: GR-712 SERIAL NO.: 49947 YEAR : 2007 CONTROL YEAR: 2019 CONDITION: Very Good RUN TIME: 8394 Hours Only REPLACEMENT COST AS EQUIPPED:

X axis: 145"
Y axis: 85"

Chino, CA
View Listing

20.5" x 40"H x 21" Devlieg Stackable Angle Plate, T-Slotted

$RFQ

Reference #31976 20.5" x 40"H x 21" Devlieg Stackable Angle Plate, T-Slotted 2 Piece Stackable FEATURES: T-Slotted Stackable 2-Piece Design Cast Iron Construction SPECIFICATION: Total Height

Melville, NY
View Listing

AKIRA SEIKI PERFORMA V3

$10,000

MITSUBISHI CONTROL

X axis: 32"
Y axis: 21"

Thousand Oaks, CA
View Listing

AKIRA SEIKI PERFORMA V5

$10,000

MITSUBISHI CONTROL

X axis: 45"
Y axis: 25"

Thousand Oaks, CA
View Listing

2005 AKIRA SEIKI PERFORMA JR VMC

$10,000

VT-40, 9000 RPM, 16 ATC

X axis: 16"
Y axis: 17"

Thousand Oaks, CA
View Listing

36" Width 0.097" Cap. Coe CPPS-PO-300-36 STRAIGHTENER

$16,500

COE 36" X .097" STRAIGHTENER MODEL CPPS-PO-300-36 S/N 10614-1 Year 1995 Width ........................... 36" Thic

Harrison, NJ
View Listing

32" Swing 80" Centers Acra 3280SET ENGINE LATHE, 6"bore, A2-11 spindle nose

$RFQ

NEW ACRA MODEL: 3280SET PRECISION GAP BED ENGINE LATHE Acra’s 3280SET Precision Gap Bed Engine Lathes are made in Taiwan and features the following: Headstock: • All gears and mandrel are made of a

Harrison, NJ
View Listing

3149" X Axis DMG - DECKEL MAHO Lasertec 80 Powerdrill LASER, Siemens 840D 3D Cntrl,Ho

$RFQ

DMG-SAUER 5 AXIS CNC LASERTEC MODEL: 80 POWERDRILL, S/N: 11420000547, NEW: 2006 SPECIFICATIONS: CLAMPING TABLE SIZE: ............. 7.87" - 200mm X-AXIS TRAVEL: ................... 31.49" - 800mm Y

Harrison, NJ
View Listing

H. A. Jones P0W600 Stud Welder SPOT WELDER

$1,950

One pre-owned Solid State Stud Welder: Manufacturer: : H.A. Jones Company, Dayton, OH. Model : PW600. Electrical Specs. : 115/1/60, 15 Amp. Serial Number : 4093.

Harrison, NJ
View Listing

18" x 40" Used Supertec Engine Lathe , Mdl. 1840, Steady Rest, Foot Brake, Rear

$14,500

Distance Between Centers 40" Coolant Rear Splash Guard 2 Axis Digital Readout System 6 Jaw Chuck Steady Rest Foot Brake 2 Speed Tail Stock

South El Monte, CA
View Listing

Tarus CNC Traveling Table Type Gun Drilling Machine

$RFQ

Reference #24586 Tarus CNC Traveling Table Type Gun Drilling Machine CAPACITY: Maximum Drilling Diameter ............ 2" Maximum Length ....................... 84" Minimum Drilling Diameter ............

Maximum hole diameter: 2"

Melville, NY
View Listing

8" WEBSTER & BENNETT CHUCK JAWS, SET OF FOUR (4), 3 STEP, WILL F

$RFQ

MODEL........................ T39.40/1 QUANTITY..................... 4 JAW HEIGHT................... 8" JAW WIDTH.................... 2 1/4" STEP 1 HEIGHT................ 3" STEP 2 HEIGHT.............

Diameter: 8"
# Jaws: #4

Bedford, OH
View Listing

NEWALL DP700 Digital Readout MILL PACKAGE 16" x 36"

$RFQ

DP700 Digital Readout The DP700 is the latest in Newall's line of a powerful and intuitive DROs. The unit is housed in a rugged, ergonomically designed casting. The DRO features all of the essential functions for

Bedford, OH
View Listing

Gallmeyer Livingston 62, NEW 1986, POWER TABLE POWER WORKHEAD TOOL CUTTER GRINDER, BEAU

$RFQ

GALLMEYER & LIVINGSTON "GRAND RAPIDS" UNIVERSAL TOOL & CUTTER GRINDER ***** MADE IN USA FOR THE US GOV'T ***** ** LONG TABLE WITH POWER FEED, 6" x 44" SIZE, 24" TRAVE

Harrison, NJ
View Listing

30" Screen OGP OQ30S, New 1988/last calibrated 2020, OPTICAL COMPARATOR, DRO w/Prog.

$RFQ

30" OPTICAL GAGING PRODUCTS, INC. (O.G.P.) HORIZONTAL PROJECTION FLOOR TYPE OPTICAL COMPARATOR MODEL: OQ-30S S/N: OQ300607 NEW: 1988 SCREEN DIAMETER .........

Harrison, NJ
View Listing

1" Width 2" Stroke Rapid Air A2 PRESS FEED

$300

RAPID-AIR A2 SLIDE FEED S/N 876 STROKE .............................. 2" WIDTH ............................... 1-1/2" THICKNESS ........................... .002"-.040" CYCLES PE

Harrison, NJ
View Listing

9" X 49" Used Atrump Vertical Milling Machine, Mdl. K3VL, Kool Mist Coolant Syst

$8,250

Table Size 9" x 49" X Axis Travel STD.927mm (36-1/2”).OPT.970 mm (38-1/2”) Y Axis Travel 400mm (15-3/4”) Z Axis Travel 406mm (16”) Quill Diameter Ø86mm (3-3/8”) Quill

South El Monte, CA
View Listing

175 Tons x 12' Used Wysong Hydraulic CNC Press Brake **Parts Machine**Ram Drifts* Sold As-

$17,500

None

South El Monte, CA
View Listing

15" x 17" Used W.F. Wells Automatic Horizontal Bandsaw (Twin Post Design), Mdl.

$12,500

Coolant Capacity 10.5 Gallons Multiple Index 72" Discharge Table 12" x 11" Rectangle 15" x 17" Round 15" Capacity: 15" x 17" Horsepower 3 H.P. WEIGHT 1,750 Lbs. Operation Fully Automatic Mi

South El Monte, CA
View Listing

Used Eaton “Couplamatic” Hose Coupler Crimper, Mdl. 4530-005S3, #A6879 *SPECIAL PRICE! As-

$1,500

APPLICATIONS:Deep draw workBendingEmbossingCoiningFormingBlankingPunchingOBL SeriesSTANDARD FEATURESLarge double-acting cylindersGenerous window openingsSix point square-type gibbingModular “stack” cartridge

South El Monte, CA
View Listing

AGIECHARMILLES Robofil 240ccs Wire EDM, 2011

$RFQ

AgieCharmilles Robofil 240ccs Wire EDM New in 2011, Auto Wire Threader Glass Scales XY & UV Crash Protection 12” LCD Touch Screen Transformer

X axis travel: 13.77"
Y axis travel: 8.66"

Prescott, AZ
View Listing

SODICK AD325L Wire EDM, 2008

$RFQ

Sodick AD325L Wire EDM Sodick LN1W Control Compact Footprint

X axis travel: 13.77"
Y axis travel: 9.84"

Prescott, AZ
View Listing

Grieve Walk-in 48" x 72"H x 48", gas 500F Class A

$RFQ

Grieve walk-in oven, 48"W x 72"H x 48"L, gas fired, type 304 stainless interior - horizontal air-flow, 500F, chart recorder, solvent use rated (Class A oven), 3 gallons/batch @ 194F, stainless steel roll-i

Chamber width: 48"
Chamber length: 48"

SOUTH WINDSOR, CT
View Listing

10 Cu. Ft. Almco 0R-10, ROUND BOWL, 53" DIAMETER VIBRATORY FINISHER, TIMER, 220 VOLTS

$RFQ

&nbs

Harrison, NJ
View Listing

5 Cu. Ft. Almco 0R-5C, ROUND BOWL, CONTROL PANEL w/TIMER VIBRATORY FINISHER, SOUND ENCLOSU

$RFQ

5 Cu.Ft. ALMCO BOWL TYPE VIBRATORY FINISHER MODEL: OR-5C S/N: 089811 NEW: 1998 &nb

Harrison, NJ
View Listing

50" Used Reed R Conical Roll Bender for Cone Rolling up to 50", Mdl. R, 3- Sets

$42,500

3- Sets Of Rolls (In Photos) Electric Foot Pedals

South El Monte, CA
View Listing

160 Ton Used Ying Lin Side Gap Frame Punch Press (Open Back Fixed Bed Press) with NEW CONT

$59,500

Capacity 163 Ton Nominal Stroke 6 Slide block stroke 160 Number of stroke Fixed min-1 40 Number of stroke Variable (Optional) min-1 40-60 Max die set height (mm) 350 Die set height adjustment(mm) 80

South El Monte, CA
View Listing

321 Ton Used Ying Lin Side Gap Frame Punch Press, OBS press, Mdl. JZ21-315, high performan

$79,500

Capacity 321 Ton Nominal Stroke 10 Slide block stroke 200 Number of stroke Fixed min-1 30 Number of stroke Variable (Optional) min-1 25-35 Max die set height (mm) 430 Die set height adjustment(mm) 1

South El Monte, CA
View Listing

14 Ton x 14" Used Hydraulic H Frame Press, Mdl. -, Manual Control, Hydraulic Pump Mot

$3,750

Tonnage 14 Ton Stroke 14" Distance Between Housing 31" Voltage 220V / 3-Phase Manual Control Hydraulic Pump Motor Movable Table 14" STROKE Portable

South El Monte, CA
View Listing

18" Used DCM Tech AUTOMATIC Punch & Die Rotary Surface Grinder Fully Enclosed (Sharpe

$18,750

The Punch and Die Grinder (PDG), a Rotary Table Surface Grinder, is primarily dedicated to the sharpening of turret press tooling, but also includes the sharpening of rooftop punches and small progressive die details. D

South El Monte, CA
View Listing

5 H.P. Used Hill Bros. & Co. Air Compressor with Horizontal Tank, Mdl. -, #A6882

$1,250

Tank Size 80 Gallon Voltage 208-220/440V~3 Phase Horsepower 5 H.P. None

South El Monte, CA
View Listing

20" - 28" x 64" Used H.E.S. Cholet Gap Bed Engine Lathe- Special Price- AS

$5,500

Capacity 20"/28" x 64" Distance Between Centers 64" Swing Over Cross Slide 12-1/4" Hole Thru Spindle 2-1/16" Spindle Mount A1-6 Spindle Speeds 32 to 1600 RPM Longitudinal Feeds .002 - .028 IPM Cr

South El Monte, CA
View Listing

1.73" x 10' Used Durma 4 Roll Hydraulic Plate Rolling Machine With NC Control With Re

$94,500

Bending Capacity 1.73" x 120" Maximum Bending Thickness 1.73" Maximum Bending Length 120" Type Hydraulic WEIGHT 80,000 LBS. Dimensions ( L x W x H ) 248x91x102 Guide Arms To Be Shipped Separately 8,

South El Monte, CA
View Listing

26" x .223" PERFECTO #38-26-7, 7-Roll Flattener

$RFQ

UTUBE NUMBER: 3971 MANUFACTURER: PERFECTO MODEL NUMBER: 38-26-7 SERIAL NUMBER: 85-79024 SPECIFICATIONS: Maximum Strip Width: 26" Maximum Strip Thickness: .223" Roll Diameter: 3-1/2" Pass Line of

Maximum coil width: 26"
Maximum coil thickness: 0.223"

Perrysburg, OH
View Listing

3" (76.2 mm) HAVEN #912 Double End Finishing Machine

$RFQ

UTUBE NUMBER: 3977 MANUFACTURER: HAVEN MODEL NUMBER: 912 SERIAL NUMBER: 6075 SPECIFICATIONS: Maximum Tube Diameter: 3" (76.2 mm) Minimum Tube Diameter: 1/2" (12.7 mm) Maximum Wall Thickness: .

Maximum diameter: 3"

Perrysburg, OH
View Listing

18 Stand x 3-1/4" x 52" B & K Rollformer

$RFQ

UTUBE NUMBER: 3981 MANUFACTURER: B & K MODEL NUMBER: SERIAL NUMBER: SPECIFICATIONS: Number of Stands: 18 Roll Shaft Diameter: 3-1/4″ Roll Space: 52″ Horizontal Centers: First (10) Stands – 16″, Last (8) Sta

# Stands: #18
Roll diameter: 3.25"

Perrysburg, OH
View Listing

Mori Seiki SL-250B CNC Turning Center

$29,700

SKU 2255 MAKE Mori Seiki MODEL NO. SL-250 YEAR 1998/2000 CONDITION Very Good CUTTING HOURS: ONLY Equipped With: Fanuc MSC-500 CNC Control 10″ 3-Jaw Kitagawa Hydraulic Chuck 10-Station Turret with Tools Tool P

Swing: 26.77"
Centers: 22.64"

Chino, CA
View Listing

Parpas ML130 CNC Ram Type Travelling Column CNC Horizontal Boring Mill

$RFQ

Reference #31336 Parpas ML130 CNC Ram Type Travelling Column CNC Horizontal Boring Mill EQUIPPED WITH: Heidenhein TNC 415B CNC Control Universal 3 Plus 2 CNC Milling Head 79" x 274" T-Slotted Floor Plat

Spindle diameter: 5.12"
X axis travel: 196.85"

Melville, NY
View Listing

SNK BFR-3500 Ram Type CNC Traveling Column Horizontal Boring Mill

$RFQ

Reference #31968 SNK BFR-3500 Ram Type CNC Traveling Column Horizontal Boring Mill FEATURES: Fanuc 31i-B CNC Control w/ Hand Held Pendant T-Slotted Floor Plates CNC Rotary Table 90-Degree Angle Head SPECIFICA

Spindle diameter: 12.9"
X axis travel: 314.96"

Melville, NY
View Listing

1994 27 Ton Amada CSHW-220 Hydraulic Notcher

$RFQ

Specifications Capacity 27 Tons Max Sheet Thickness 0.236" Strokes Per Minute 40 Stroke 1.02" Main Motor 5 HP Machine Weight 3,530 lbs Equipped With Coping Attachment DRO Foot Pedal

SANTA ANA, CA
View Listing

1994 37" Timesaver 137-1HPM-ES/75 Grinding/Graining Machine

$RFQ

Specifications Maximum Grinding Width 37" Number of Heads 1 (Belt) Maximum Part Height 8" Contact Drum Diameter 6" Main Motor 20 HP Variable Speed on Feed Belt 15-45 FPM Dimensions (approx.) 6'

SANTA ANA, CA
View Listing

10'x10 Ga GMC PBR-1010E Power Bending Roll

$RFQ

Specifications Stock Number 12459 Serial Number Capacity 10 Ga Max Bending Length 10' Roll Diameter 6.70" Min Bending Diameter 9" Pre-bend 0.12" Rolls Speed (ft/min) 17 Rolls Opening 0.5&qu

Roll length: 120"

SANTA ANA, CA
View Listing

8' x 10 Ga GMC PBR-0810E Power Bending Roll

$RFQ

Max Bending Length 96" Capacity Mild Steel: 10 Ga., Stainless Steel: 14 Ga, Aluminum 1/4" Roll Diameter 6" Min Bending Diameter 8" Pre-bend 0.12" Rolls Speed (ft/min) 17 Rolls Opening 0.5&q

Roll length: 96"

SANTA ANA, CA
View Listing

buy & sell, new & used machinery, machine tools & equipment

Machines currently for sale: