buy & sell, new & used machinery, machine tools & equipment

<Prev | 81 | 82 | 83 | 84 | 85 | 86 | 87 | 88 | 89 | 90 | Next>
Refine: Viewing 8701 - 8800 of 20764 matches
Sort by:
Items Per Page:  20 |  50 |  100
GMC PBR-0412E 4 ft x 12 ga. Power Bending Rolls
$RFQ
GMC PBR-0412E 4 ft x 12 ga. Power Bending Rolls
CALL 386-304-3720 FOR AVAILABILITY FEATURES: This machine has a 2HP Motor, rated at 220V/440V three phase. Power bending roll up/down with push button & display. SO 9001 certified Taiwan machines All (3) rolls
  • Roll length: 48"
    GMC Electrical Power Shear EPS-1016E
    $RFQ
    GMC Electrical Power Shear EPS-1016E
    CALL 386-304-3720 AVAILABILITY FEATURES: ISO 9001 certified American design and Taiwan quality machine With material front out tray HD all steel construction for maximum rigidity Precision dri
    • Maximum thickness: 16Ga
    • Cutting length: 120"
      14" Throat 8" Height Jet VBS-1408 BAND SAW, 20x20tbl, 1 hp, 115V, 1 ph
      $RFQ
      14" Throat 8" Height Jet VBS-1408 BAND SAW, 20x20tbl, 1 hp, 115V, 1 ph
        "NEW" JET Model:VBS-1408 VERTICAL BANDSAW       COMMON FEATURES: Heavy-duty completely enclosed steel frame Multi-tilting work surfaces Easy-to-read blade tension indicator Varia
      14" Swing 40" Centers Jet EVS-1440B ENGINE LATHE
      $RFQ
      14" Swing 40" Centers Jet EVS-1440B ENGINE LATHE
      NEW 14" x 40" JET ENGINE LATHE MODEL: EVS-1440B    SPECIFICATIONS: SWING OVER BED (IN.).......................... 14 SWING OVER CROSS SLIDE (IN.).................. 9-9/16 SWING THROUGH GAP (IN.)
      15,000 Lb. (7.5 Ton) DAHLSTROM Coil Car
      $RFQ
      15,000 Lb. (7.5 Ton) DAHLSTROM Coil Car
      Stock #3713 Model #MCL-15-15L Serial # L-228 Capacity: 15000 Lbs. (7.5 Ton) Maximum Lift: 18" Dimensions: 7' x 4' x 5' Approx Weight: 5000 Lbs Location: Perrysburg, Ohio
      BEVELER USA UZ18 HARDWORKER Double Sided High Speed Beveler
      $RFQ
      BEVELER USA UZ18 HARDWORKER Double Sided High Speed Beveler
      CALL FOR AVAILABILITY FEATURES: Double Sided High Speed Beveler UZ 18 HardWorker, variable angle adjustment (maximum bevel width 18 mm/0,70". Automatic feed) The UZ 18 Hardworker machine is one of the m
      • Degree of bevel: 50º
      • Maximum plate thickness: 1.6"
        BEVELER USA UZ15 RAPID Double Sided High Speed Beveler
        $RFQ
        BEVELER USA UZ15 RAPID Double Sided High Speed Beveler
        CALL FOR AVAILABILITY FEATURES: Double Sided High Speed Beveler UZ15 RAPID, variable angle adjustment, automatic feeding (max.width of bevel 0,6" / 15mm) 2 BEVELERS IN ONE + 3D ADAPTIVE SYSTEM = UNIQUE BEVE
        • Degree of bevel: 50º
        • Maximum plate thickness: 1.6"
          Used Powermatic 18" Planer Model 180
          $7,500
          Used Powermatic 18" Planer Model 180
          Used Powermatic 18" Planer Model 180 SN. 88807250 7.5 HP, 208-230/460 volt, presently wired 208-230 Knife grinding attachment included
          Used Yates American 12" Jointer
          $3,500
          Used Yates American 12" Jointer
          Used Yates American 12" Jointer. Model #1 SN. R-2310 4 Knife Cutter Head 220 Volt, 3 Phase
          Used Original 16" Metal Cutting Saw
          $12,900
          Used Original 16" Metal Cutting Saw
          Used Original 16" Metal Cutting Saw. Model 3579 16 L Type 7 Specs: Arm: Long Blade size: 16" HP: 7.5 HP Voltage: 208 Volt only, 3 Phase Feed Voltage: 120 volt Brake: Automatic Arbor: 1" dia. x
          Used Original 16" Metal Cutting Saw
          $12,900
          Used Original 16" Metal Cutting Saw
          Used Original 16" Metal Cutting Saw. Model 3579 16 L Type 7 Specs: Arm: Long Blade size: 16" HP: 7.5 HP Voltage: 208 Volt only, 3 Phase Feed Voltage: 120 volt Brake: Automatic Arbor: 1" dia. x
          2017 DMG Mori CMX 1100 Vertical Machining Center
          $89,000
          2017 DMG Mori CMX 1100 Vertical Machining Center
          Specifications: Table Size ..................................................................... 55.1" x 22" Max Table Load ................................................................ 2,200 Lbs X Axis
          • X axis: 43.3"
          • Y axis: 22"
            12" Width 30" Length Acer AGS-1230AHD SURFACE GRINDER, 12"X30. 3-AXIS AUTO
            $RFQ
            12" Width 30" Length Acer AGS-1230AHD SURFACE GRINDER, 12"X30. 3-AXIS AUTO
            "NEW" ACER HIGH PRECISION SURFACE GRINDER MODEL: AGS-1230AHD - 3 Axis Automatic   FEATURES: (3-Axis Auto Movement) Precison "Turcite-B" Ways Hydraulic Table & Electronic Cross Feed Aut
            26" Swing 200" Centers Summit 26-6 x 200 Big Hole Engine Lathe ENGINE LATHE, Inc
            $RFQ
            26" Swing 200" Centers Summit 26-6 x 200 Big Hole Engine Lathe ENGINE LATHE, Inc
            NEW SUMMIT 26-6 x 200 BIG HOLE ENGINE LATHE   SPECIFICATIONS   Capacities Swing over bed: 26" Swing over cross slide: 18" Swing over gap: 35" Length of gap: 18"   Work Piece W
            OKUMA LU-S1600-2SC X 1000 4-AXIS CNC TURNING CENTER
            $RFQ
            OKUMA LU-S1600-2SC X 1000 4-AXIS CNC TURNING CENTER
            <strong>OKUMA LU-S1600<span style="font-size: 11pt; font-family: 'Times New Roman';">-2SC X 1000</span> 4 AXIS CNC TURNING CENTER</strong><br /> NEW-2014 (Installed in 2017)<br /> <
            Mori Seiki CL-200B5 CNC Turning Center
            $RFQ
            Mori Seiki CL-200B5 CNC Turning Center
            <strong>MORI SEIKI CL-200B5 CNC TURNING CENTER</strong><br /> NEW-1998<br /> <br /> SPECIFICATIONS:<br /> Chuck size &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; <span cla
            Mazak FH-480 Horizontal Machining Center
            $RFQ
            Mazak FH-480 Horizontal Machining Center
            <strong>MAZAK FH-480 HORIZONTAL MACHINING CENTER</strong><br /> NEW-1997<br /> <br /> SPECIFICATIONS:<br /> Travels:<br /> X-Axis: 22.05&Prime;<br /> Y-Axis: 22.05&
            Milltronics RW-20 CNC Vertical Machining Center
            $RFQ
            Milltronics RW-20 CNC Vertical Machining Center
            <strong>MILLTRONICS RW20 VERTICAL MACHINING CENTER</strong><br /> NEW-2002<br /> <br /> Specifications:<br /> Control ..................................................................
            AMADA COMA 555 CNC TURRET PUNCH
            $RFQ
            AMADA COMA 555 CNC TURRET PUNCH
            <strong>AMADA COMA 555 CNC TURRET PUNCH</strong><br /> New 1986<br /> <br /> EQUIPPED WITH: <br /> Fanuc C control<br /> Misc. Tooling<br /> <br /> <br /> SPECI
            Chuck Jaws (4) 11.5" x 4.375" x 6.75"
            $RFQ
            Chuck Jaws (4) 11.5" x 4.375" x 6.75"
            Reference #30189 Chuck Jaws, Face Plate Type For Vertical Boring Mill Features: Matched Set 3" Jaw Travel Keyed CAPACITY: Overall Dimensions (LxWxH) ........ 11.5" x 4.375" x 6.75"
            • Diameter: 11.5"
              Chuck Jaws (4) 12.25” x 5.5” x 6.75”
              $RFQ
              Chuck Jaws (4) 12.25” x 5.5” x 6.75”
              Reference #30188 Chuck Jaws, Face Plate Type For Vertical Boring Mill Features: Matched Set(4) 6" Jaw Travel Keyed CAPACITY: Overall Dimensions (LxWxH) ........ 12.25" x 5.5" x 6.75"
              • Diameter: 0.75"
                NEW - JUNGHEINRICH EKX 516K TURRET TRUCK - PLEASANT PRAIRIE, WISCONSIN
                $125,000
                NEW - JUNGHEINRICH EKX 516K TURRET TRUCK - PLEASANT PRAIRIE, WISCONSIN
                NEW CONDITION, Reduced ask price to $125,000, CONSIDER ALL OFFERS, 3,500 lb. capacity 80V Man-up Turret Truck (Compact), Mast 275" / 7000 mm MFH; 190" / 4805 mm OAL Simplex, Auxiliary Mast Auxiliary Lift 70&quo
                GMC HS-0810MD 8 ft x 10 ga. Hydraulic Metal Shear
                $RFQ
                GMC HS-0810MD 8 ft x 10 ga. Hydraulic Metal Shear
                CALL 386-304-3720 FOR AVAILABILITY FEATURES: 1. Premium Taiwan Manufacturing: Crafted with precision and quality, these machines are manufactured in Taiwan, renowned for their excellence in machinery production. 2.
                1986 Matsuura MC 1000v5
                $4,800
                1986 Matsuura MC 1000v5
                Good working machine, Closing shop, need room for new business Local Pickup
                3/16" National High Speed DSSDTubular Rivet Header
                $RFQ
                3/16" National High Speed DSSDTubular Rivet Header
                No description providedMaximum Cutoff Diameter3/16" Maximum Cutoff Length1-3/16" Maximum Shank Length3/4" Maximum Production300 Electrics208V/60Hz/3 Phase Bushing Cut
                72" x 40,000# x 14 gauge Welty Way blanking & slitting line
                $RFQ
                72" x 40,000# x 14 gauge Welty Way blanking & slitting line
                Slitting and cut to length line, 40,000# , installed, inspect running, flying shear, stacking table, scrap winders, coil car, uncoiler, complete line
                72" x 40,000# x 14 gauge Welty Way blanking & slitting line
                $RFQ
                72" x 40,000# x 14 gauge Welty Way blanking & slitting line
                Slitting and cut to length line, 40,000# , installed, inspect running, flying shear, stacking table, scrap winders, coil car, uncoiler, complete line
                CM LOADSTAR ELECTRIC CHAIN HOIST
                $1,950
                CM LOADSTAR ELECTRIC CHAIN HOIST
                CM LOADSTAR 2 TON ELECTRIC CHAIN HOIST PRICE: Loaded on Truck, Our Warehouse, York, PA …… $1,950.00 HMC Stock # 19080 Hoist Serial No.: XL0221 Hoist Model No.: Unknown New Date: Unknown Rated Lift Capacity: 2 Sho
                CINCINNATI 330-18 VERCIPOWER VERTICAL MILL
                $19,500
                CINCINNATI 330-18 VERCIPOWER VERTICAL MILL
                CINCINNATI 330-18 VERCIPOWER VERTICAL MILL PRICE: Loaded on Truck, Our Warehouse, York, PA …… $19,500.00 HMC Stock No. 18346-P Machine Serial No. 311031V5W-3 Machine Model No. 330-18 VerciPower New Date: 1971 - Rebui
                GIDDINGS & LEWIS MANUAL ROTARY TABLE
                $8,950
                GIDDINGS & LEWIS MANUAL ROTARY TABLE
                48" X 48" GIDDINGS & LEWIS MANUAL ROTARY TABLE PRICE: Loaded on Truck, Our Warehouse, York, PA …… $8,950.00 HMC Stock No. 18227-P Machine Serial No. Unknown Machine Model No. Unknown New Date: Unknown Table Top: 48"
                EVERISING HORIZONTAL BAND SAW
                $5,950
                EVERISING HORIZONTAL BAND SAW
                EVERISING 10" HORIZONTAL BAND SAW PRICE: Loaded on Truck, Our Warehouse, York, PA …… $5,950.00 HMC Stock No. 18056 Machine Serial No. 10045 Machine Model No. S-260HA New Date: Unknown Made in Taiwan Rated Capacity Ro
                2013 Haas HA5C Brushless Style Rotary Indexer With Tailstock
                $4,800
                2013 Haas HA5C Brushless Style Rotary Indexer With Tailstock
                Specifications: Torque ....................................................................... 25 ft-lbs Max Runout ................................................................ 0.0004" Backlash ............
                4000 WATT AMADA FOM2-4222, 7' x 13 1/2' DUAL PALLET,MFG:2012
                $RFQ
                4000 WATT AMADA FOM2-4222, 7' x 13 1/2' DUAL PALLET,MFG:2012
                4000 WATT AMADA FOM2-4222 FLYING OPTIC LASER SYSTEM MFG:2012 - APPROX:44,400 HOURS TURBO REPLACED AT 25,936 HOURS
                • Wattage: 4000W
                  2 KW AMADA FLC3015AJ FIBER LASER W/ASLUL 300FOL-AJ AUTOMATED TOWER MFG:2013
                  $RFQ
                  2 KW AMADA FLC3015AJ FIBER LASER W/ASLUL 300FOL-AJ AUTOMATED TOWER MFG:2013
                  2 KW AMADA FLC3015AJ FIBER LASER W/ASLUL 300FOL-AJ AUTOMATED TOWER MFG:2013
                  • Wattage: 2W
                    33 TON AMADA VIPROS 368 KING II, FANUC 18P CNC CONTROL,MFG:2000
                    $RFQ
                    33 TON AMADA VIPROS 368 KING II, FANUC 18P CNC CONTROL,MFG:2000
                    33 TON AMADA VIPROS 368 KING II HYDRAULIC TURRET PUNCH WITH FANUC 18P & PHNC CNC CONTROL MFG: 2000
                    • Tonnage: 33T
                      33 TON AMADA VIPROS 368 KING II, FANUC 18P CNC CONTROL,MFG:1999
                      $RFQ
                      33 TON AMADA VIPROS 368 KING II, FANUC 18P CNC CONTROL,MFG:1999
                      33 TON AMADA VIPROS 368 KING II HYDRAULIC TURRET PUNCH WITH FANUC 18P & PHNC CNC CONTROL MFG: 1999
                      • Tonnage: 33T
                        Used Brandt Optimat KD 78/2C
                        $14,995
                        Used Brandt Optimat KD 78/2C
                        Used Brandt Optimat KD 78/2C Edgebander. Year: 2000 230v., 3 Phase Laminate, wood, PVC 3mm capable. Pellet hot melt glue Auto feed, front & End trimmers Top/Bottom trimmers Top/Bottom profile trimmers Co
                        2000 Haas VF-0E Vertical Machining Center
                        $17,900
                        2000 Haas VF-0E Vertical Machining Center
                        Specifications: Control .................................................................................. Haas Table Size .......................................................................... 36"x14" M
                        • X axis: 30"
                        • Y axis: 16"
                          Delta/Rockwell 34-350
                          $2,495
                          Delta/Rockwell 34-350
                          12"/14" blade 1" arbor 5hp 3ph
                          60" x .625" x 50ton McKay Slitting Line
                          $RFQ
                          60" x .625" x 50ton McKay Slitting Line
                          Make: McKay, Coil Thickness: .065″ – .625″, Maximum Material Width: 66″, Weight Capacity: 100,000Lb, Coil ID: Entry 24″ – 30″ / Exit 30″, Coil OD: 90″, Speed: 30 – 150 fpm / 90 – 450 fpm, Direction: Left to Right, Pit Ty
                          • Maximum workpiece width: 60"
                          • Maximum workpiece thickness: 0.625"
                            120 TON PIRANHA SEP-120 HYDRAULIC PUNCH PRESS
                            $RFQ
                            120 TON PIRANHA SEP-120 HYDRAULIC PUNCH PRESS
                            120 TON PIRANHA SEP-120 HYDRAULIC PUNCH PRESS
                            • Tonnage: 120T
                              6000 WATT MAZAK OPTIPLEX II 3015 FIBER LASER CUTTING SYSTEM INSTALLED: 2017
                              $RFQ
                              6000 WATT MAZAK OPTIPLEX II 3015 FIBER LASER CUTTING SYSTEM INSTALLED: 2017
                              6000 WATT MAZAK OPTIPLEX II 3015 FIBER LASER CUTTING SYSTEM INSTALLED: 2017
                              • Wattage: 6000W
                                88 TON X 81" BYSTRONIC XCITE 80 SERVO-DRIVEN CNC PRESS BRAKE,MFG: 2013
                                $RFQ
                                88 TON X 81" BYSTRONIC XCITE 80 SERVO-DRIVEN CNC PRESS BRAKE,MFG: 2013
                                88 TON X 81" BYSTRONIC XCITE 80 SERVO-DRIVEN CNC PRESS BRAKE X,X1,R,Z1,Z2,Y1,Y2 - ACCEPTS WILA STYLE TOOLING - MFG:2013
                                • Tonnage: 88T
                                  150 TON x 10' BYSTRONIC XPERT 150 X 31000, 6-AXIS,MFG:2012
                                  $RFQ
                                  150 TON x 10' BYSTRONIC XPERT 150 X 31000, 6-AXIS,MFG:2012
                                  Bystronic Xpert 150 x 3000 Press Brake Bystronic CNC Control 6-Axis CNC BackGauge, T12 Hydraulic Clamping Upper/Lower Hydraulic Crowning - Manufactured 2012
                                  • Tonnage: 150T
                                    2005 Caterpillar 740 - 6 X 6 & Cab w/ A/C & Heat - Stock Number: E7
                                    $72,500
                                    2005 Caterpillar 740 - 6 X 6 & Cab w/ A/C & Heat - Stock Number: E7
                                    6 CYL CAT ENGINE, 6 X 6, 40 TON MACHINE, 29.5 R 25 TIRES, ENCLOSED CAB W/ A/C & HEAT.
                                    2015 Caterpillar 553C FELLER BUNCHER - Stock Number: E7236
                                    $62,000
                                    2015 Caterpillar 553C FELLER BUNCHER - Stock Number: E7236
                                    CAT ENGINE, 174 HP, SH56B SAWHEAD, WORK LIGHTS, ENCLOSED CAB W/ A/C & HEAT
                                    5,000 Lb. x 18″ FEED LEASE CORPORATION Single Uncoiler
                                    $RFQ
                                    5,000 Lb. x 18″ FEED LEASE CORPORATION Single Uncoiler
                                    Stock #3705 Capacity: 5,000 Lbs Max Width: 18″ ID Range: 16″ – 20″ Max OD: 60″ Equipped With: - Manual Brake - Manual Expansion 3-Arm - (2) Coil Keepers Dimensions: 4′ x 4′ x 5′ Approx Weight: 1000 Lbs Locatio
                                    • Maximum weight capacity: 5000Lb
                                    • Maximum coil width: 18"
                                      10,000 Lb x 30″ ROWE #10030-DSV-DE Double Uncoiler
                                      $RFQ
                                      10,000 Lb x 30″ ROWE #10030-DSV-DE Double Uncoiler
                                      Stock #3710 Model #10030 – DSV – DE Serial #28789 Capacity: 10,000 Lbs Per Side Max OD: 72″ Max Width: 30″ ID Range: 16″ – 20″ Equipped With: - 4-Arm Electrical Expansion - Air Brakes - Air Operated Pin Lock -
                                      • Maximum weight capacity: 10000Lb
                                      • Maximum coil width: 72"
                                        10,000 Lb. x 36″ EGAN PressPartner M1001-36 Single Uncoiler
                                        $RFQ
                                        10,000 Lb. x 36″ EGAN PressPartner M1001-36 Single Uncoiler
                                        Stock #3712 Model #M1001-36 Serial #2759 Weight Capacity: 10,000 Lbs Max Width: 36″ ID Range: 16″ – 20″ Max O.D.: 72″ Equipped With: - Manual 4-Arm Expansion - Electric Brake - Motorized Inch Up Drive w/Hold Do
                                        • Maximum weight capacity: 10000Lb
                                        • Maximum coil width: 36"
                                          Bradbury - ASC C & Z Purlin Roll Forming Line
                                          $RFQ
                                          Bradbury - ASC C & Z Purlin Roll Forming Line
                                          Make: Bradbury / ASC Product: C & Z Purlin Size: 4" - 12" Web / 2" - 4" Flanges Roll Former: Bradbury DTR Side - Side Purlin Auto Web Change with ProScale Material: 55 grade 16g - 22g S
                                          Sliding Table 26"X30" W/54" EX
                                          $549
                                          Sliding Table 26"X30" W/54" EX
                                          Sliding Table 26"X30" W/54" Fence Excaliber Model: 50-SLT40P (Excaliber) For 10" Table Saw
                                          1997 SOUTHWESTERN INDUSTRIES TRAK DPM 3-AXIS CNC BED TYPE MILL, 10" x
                                          $RFQ
                                          1997 SOUTHWESTERN INDUSTRIES TRAK DPM 3-AXIS CNC BED TYPE MILL, 10" x
                                          TABLE TABLE SIZE: 50" X 10" T-SLOTS: 5/8" W X 3 NO. X 2-9/16" PITCH MAXIMUM WEIGHT ON TABLE: 1,320 LBS TRAVELS X-AXIS TRAVEL: 31" Y-AXIS TRAVEL: 17" Z-AXIS TRAVEL: 23.5"
                                          • Table width: 10"
                                          • Table length: 50"
                                            1999 DO-ALL MODEL BRM-DEBURRING MACHINE, 2” - 6”
                                            $RFQ
                                            1999 DO-ALL MODEL BRM-DEBURRING MACHINE, 2” - 6”
                                            SPECIFICATIONS CAPACITY, DIAMETER: 2” - 6” CAPACITY (LENGTH): 2” - 6” BELT SPEED: 2 TO 20 FPM PARTS PER HOUR: 200 TO 600 DRIVE MOTOR: 1/42 HP BELT MOTOR: 1/2 HP UPPER BELT MOTOR: 1/2 HP GENERAL DIMENSIONS,
                                            • Width: 6"
                                              REPUBLIC LAGUN AMERICAN TURNMASTER AT-SB-326 GANG TOOL CNC LATHE, 5C
                                              $17,500
                                              REPUBLIC LAGUN AMERICAN TURNMASTER AT-SB-326 GANG TOOL CNC LATHE, 5C
                                              CAPACITIES SWING OVER BED: 10.63” SWING OVER CROSS SLIDE: 5.12” COLLET: 5C HEADSTOCK SPINDLE BORE: 1.25” MAXIMUM SPEED: 6,000 RPM MAXIMUM RATING: 5 HP COOLANT PUMP: ¼ HP TRAVELS X-AXIS: 15.75” Z-AXIS
                                              • Swing: 10.63"
                                              • Centers: 15.75"
                                                2011 MIYANO BNE-51SY5 6-AXIS CNC LATHE, TWIN TURRET, SUB, LIVE, 2" BAR
                                                $RFQ
                                                2011 MIYANO BNE-51SY5 6-AXIS CNC LATHE, TWIN TURRET, SUB, LIVE, 2" BAR
                                                BAR WORK ROUND COLLET CAPACITY: 2” CHUCK WORK CHUCK SIZE (MAIN): 6” CHUCK SIZE (SUB): 4” WORK LENGTH MAXIMUM TURNING LENGTH: 3.54” MACHINING CAPACITY MAXIMUM TURNING DIAMETER (MAIN): 6” MAXIMUM TURNING DIA
                                                • Swing: 20"
                                                  72" x .312" Rowe Hi Speed Shear
                                                  $RFQ
                                                  72" x .312" Rowe Hi Speed Shear
                                                  YEAR: 1980, MODEL: 630RKB, CAPACITY: 0.312″ MILD STEEL, 0.210″ STAINLESS, 72″ WIDE CAPACITY, 60 STROKES PER MINUTE, 20 CUTS PER MINUTE, BOW TIE TOP BLADE, 74″ LONG x 0.875″ THICK, STRAIGHT BOTTOM BLADE 73″ LONG x
                                                  Predator SS Stretch Wrapper
                                                  $RFQ
                                                  Predator SS Stretch Wrapper
                                                  No description providedTurntable Low Profile60" Diameter, 12 RPM Turntable High Profile48" x 48" Octagonal, 12 RPM Wrap HeightUp to 80" Load Weight Capacity (Low & High)4,000 lbs 2 Wrap ModesSpiral Up/Down & Spir
                                                  1980 CLAUSING COLCHESTER MODEL 8015 GEARED HEAD, BED LATHE, 13" X 40&q
                                                  $RFQ
                                                  1980 CLAUSING COLCHESTER MODEL 8015 GEARED HEAD, BED LATHE, 13" X 40&q
                                                  SPECIFICATIONS SWING OVER BED: 13" SWING OVER SADDLE WINGS: 13" SWING OVER CROSS SLIDE: 8-1/4" BAR CAPACITY THRU SPINDLE: 1-5/8" DISTANCE BETWEEN CENTERS: 40" SPEEDS (16): 30 – 2,500 RPM U
                                                  • Swing: 13"
                                                  • Centers: 40"
                                                    TSUDAKOMA RBA-500R ROTARY TABLE, 2014, 19.6" DIAMETER, 7" BORE, 1
                                                    $RFQ
                                                    TSUDAKOMA RBA-500R ROTARY TABLE, 2014, 19.6" DIAMETER, 7" BORE, 1
                                                    TSUDAKOMA RBA-500R ROTARY TABLE\NEW: 2014 SPECIFICATIONS: TABLE DIAMETER................. 19.685" CENTER HEIGHT.................. 12.20" CENTER BORE THRU DIAMETER...... 7.165" EQUIPPED WITH
                                                    • Diameter or width: 19.685"
                                                    • Length: 12.2"
                                                      2001 INGERSOLL RAND SSR-EP20 ROTARY SCREW AIR COMPRESSOR, 20 HP
                                                      $RFQ
                                                      2001 INGERSOLL RAND SSR-EP20 ROTARY SCREW AIR COMPRESSOR, 20 HP
                                                      SPECIFICATIONS CAPACITY: 79 CFM OPERATING PRESSURE: 125 PSIG MAXIMUM DISCHARGE PRESSURE: 128 PSIG MAXIMUM MODULE PRESSURE: 128 PSIG DRIVE MOTOR: 20 HP GENERAL FLOOR SPACE: 6’8” X 4’ X 6’ EQUIPPED WITH
                                                      • Motor: 20HP
                                                        USED MONARCH MODEL EE TOOLROOM LATHE, 12" X 20"
                                                        $RFQ
                                                        USED MONARCH MODEL EE TOOLROOM LATHE, 12" X 20"
                                                        SPECIFICATIONS SWING OVER BED: 12-1/2" SWING OVER CROSS SLIDE: 7-1/4" DISTANCE BETWEEN CENTERS: 20" HOLE THROUGH SPINDLE: 1-3/8" TAILSTOCK TRAVEL: 4" TAILSTOCK TAPER: 2MT SPINDLE SPEEDS,
                                                        • Swing: 12"
                                                        • Centers: 20"
                                                          USED K O LEE MODEL BA900 TOOL GRINDER, 5.25” X 27.25”
                                                          $RFQ
                                                          USED K O LEE MODEL BA900 TOOL GRINDER, 5.25” X 27.25”
                                                          SPECIFICATIONS DISTANCE BETWEEN TAILSTOCKS: 22” TABLE WORKING SURFACE: 5-1/4” X 27-1/4” SUB TABLE: 8” X 36” TOTAL CROSS FEED: 7-1/4” FEED EACH REVOLUTION OF HAND WHEEL: .100” TABLE TRAVERSE: 14” SWING OVER TA
                                                          2005 Caterpillar M315C w/ Plumbing on Stick & Stablizers - Stock Number
                                                          $52,500
                                                          2005 Caterpillar M315C w/ Plumbing on Stick & Stablizers - Stock Number
                                                          4 CYL CAT ENGINE, 124 HP, 10.00 - 20 IN TIRES, PLUMBING ON STICK, QUICK CONNECT, REAR VIEW CAMERA, ENCLOSED CAB W/ A/C & HEAT, COMING IN SOON!
                                                          2013 Caterpillar 318EL W/ MANUAL THUMB & CAB W/ A/C & HEAT - Stock
                                                          $92,000
                                                          2013 Caterpillar 318EL W/ MANUAL THUMB & CAB W/ A/C & HEAT - Stock
                                                          6 CYL CAT ENGINE, 113 HP, 24 IN PADS, ENCLOSED CAB W/ A/C & HEAT, MANUAL THUMB, COMING IN SOON.
                                                          2005 Caterpillar M315C w/ Plumbing on Stick & Stablizers - E7231
                                                          $52,500
                                                          2005 Caterpillar M315C w/ Plumbing on Stick & Stablizers - E7231
                                                          4 CYL CAT ENGINE, 124 HP, 10.00 - 20 IN TIRES, PLUMBING ON STICK, QUICK CONNECT, REAR VIEW CAMERA, ENCLOSED CAB W/ A/C & HEAT, COMING IN SOON!
                                                          2005 Caterpillar M315C w/ Plumbing on Stick & Stablizers - Stock Number
                                                          $57,500
                                                          2005 Caterpillar M315C w/ Plumbing on Stick & Stablizers - Stock Number
                                                          4 CYL CAT ENGINE, 124 HP, 10.00 - 20 IN TIRES, PLUMBING ON STICK, QUICK CONNECT, REAR VIEW CAMERA, ENCLOSED CAB W/ A/C & HEAT
                                                          Striebig compact Panel Saw
                                                          $RFQ
                                                          Striebig compact Panel Saw
                                                          Compact Panel Saw The Compact Vertical Panel Saw delivers legendary Striebig accuracy at a compact price. . Cuts up to 5' x 10' panels . Free standing, one-piece fully welded frame . Heavy-duty support ro
                                                          2013 Caterpillar M315D - 4X4 - CAB W/ A/C & HEAT - Stock Number: E7229
                                                          $83,500
                                                          2013 Caterpillar M315D - 4X4 - CAB W/ A/C & HEAT - Stock Number: E7229
                                                          4 CYL CAT ENGINE, 145 HP, 10.00 - 20 IN TIRES, PLUMBING ON STICK, QUICK CONNECT, REAR VIEW CAMERA, ENCLOSED CAB W/ A/C & HEAT, COMING IN SOON!
                                                          1999 Caterpillar D3C XL W/ 6-WAY BLADE - Stock Number: W7028
                                                          $26,500
                                                          1999 Caterpillar D3C XL W/ 6-WAY BLADE - Stock Number: W7028
                                                          6 CYL CAT ENGINE, 3 SPEED HYDRO-STATIC TRANS, JOYSTICK STEERING, 16 IN PADS, 8FT 3IN 6-WAY BLADE
                                                          2012 Caterpillar 329EL - Enclosed Cab w/ A/C & Heat - Stock Number: E72
                                                          $87,500
                                                          2012 Caterpillar 329EL - Enclosed Cab w/ A/C & Heat - Stock Number: E72
                                                          6 CYL CAT ENGINE, 32 IN PADS, ENCLOSED CAB W/ A/C & HEAT
                                                          24" x .075" x 6,500Lb Torrington Slitting Line
                                                          $RFQ
                                                          24" x .075" x 6,500Lb Torrington Slitting Line
                                                          Max Width: 24″, Material Thickness: .005″ – .075″, Weight: 6,500Lb, Coil ID: 16″ – 24″, Coil OD: 68″, Direction: Left to Right. Entry Floor Standing Coil Car, Mandrel Uncoiler with Hydraulic Expansion, Slitting Head with
                                                          • Maximum workpiece width: 24"
                                                          • Maximum workpiece thickness: 0.075"
                                                            48" x .125" x 20,000Lb Stamco Loop Slitting Line
                                                            $RFQ
                                                            48" x .125" x 20,000Lb Stamco Loop Slitting Line
                                                            Malke: Stamco , Material Width: 12″ – 48″, Material Thickness: .008″ – .125″, Weight Capacity: 20,000Lb, Coil ID: 20″, Coil OD: 72″, Direction: Left to Right, Entry L-Type Coil Car, Mandrel Uncoiler with Hold -Down Roll,
                                                            • Maximum workpiece width: 48"
                                                            • Maximum workpiece thickness: 0.125"
                                                              1999 CATERPILLAR D250E - 6X6 - 25 TON - CAB W/ A/C & HEAT - E7225
                                                              $45,000
                                                              1999 CATERPILLAR D250E - 6X6 - 25 TON - CAB W/ A/C & HEAT - E7225
                                                              6 CYL CAT ENGINE, 6X6, 25 TON, ENCLOSED CAB W/ A/C & HEAT
                                                              2006 Caterpillar D6N XL w/ 3rd Valve & Cab w/ A/C & Heat - E7223
                                                              $61,500
                                                              2006 Caterpillar D6N XL w/ 3rd Valve & Cab w/ A/C & Heat - E7223
                                                              6 CYL CAT ENGINE, 3 SPD TRANS W/ DIFF STEERING, 24 IN PADS, 6-WAY BLADE, 3RD VALVE, ENCLOSED CAB W A/C & HEAT
                                                              Used Rockwell 6" Jointer, Model 37-200
                                                              $1,100
                                                              Used Rockwell 6" Jointer, Model 37-200
                                                              Used Rockwell 6" Jointer, Model 37-200. SN 300454, 3/4 HP, 115 VOLT. Factory original Retractable Casters.
                                                              Used Delta 18" Radial Arm Saw, Model 33-062
                                                              $5,975
                                                              Used Delta 18" Radial Arm Saw, Model 33-062
                                                              Used Delta 18" Radial Arm Saw, Model 33-062. 7.5 HP, 230/460 Volt (wired 230V) 3PH. Factory Origninal Electronic Brake. SN 91L72414
                                                              Everett Cut Off Saw
                                                              $RFQ
                                                              Everett Cut Off Saw
                                                              No description providedElectrics208-230/460 Volt / 3 Phase Motor3 HP With Stand<br />Non - Miter
                                                              3/16" National 4 Die Parts Former
                                                              $RFQ
                                                              3/16" National 4 Die Parts Former
                                                              No description providedElectrics220 / 440V /10 HP / 850 RPM / 60 CYCLE - NEW SEALTITE Production100 PPM Maximum Kickout1-1/2" Minimum Kickout3/8" Minimum Cutoff Length3/8" Maximum Cutoff Length2-1/2"
                                                              19.685" W or Dia Tsudakoma RBA-500R 4th AXIS CNC ROTARY TABLE, Fanuc ,Hydraulic Clamp
                                                              $RFQ
                                                              19.685" W or Dia Tsudakoma RBA-500R 4th AXIS CNC ROTARY TABLE, Fanuc ,Hydraulic Clamp
                                                                TSUDAKOMA CNC ROTARY TABLE MODEL: RBA-500R, S/N: 110071,  NEW: 2014   TABLE DIAMETER .......................... 19.685" (500mm) CENTER HEIGHT ........................... 12.20" (310 mm) C
                                                              7" Ajax Fully Automated Upset Forging Cell Re:24888
                                                              $RFQ
                                                              7" Ajax Fully Automated Upset Forging Cell Re:24888
                                                              Dia 7 " Manufacturer Ajax Forge Tons 1,500 tons Grip Open 9.5 " Stroke 20 " SPM 25 Grip Tons 995 tons Ref #: 24888 Gather 13 " Hold 5.5 " Die space length 28 "
                                                              • Maximum diameter: 7"
                                                                2" Hill Acme XN Upsetters w/Mag Feeders/Hyd Clamping Re:25485/86/88
                                                                $RFQ
                                                                2" Hill Acme XN Upsetters w/Mag Feeders/Hyd Clamping Re:25485/86/88
                                                                Dia 2 " Manufacturer Hill Acme w/Magazine Feeder Forge Tons 390 tons Grip Open 3.5 " Stroke 9 " SPM 55 Grip Tons 200 tons Ref #: 25486 Gather 6 " Hold 1.8 " Die spac
                                                                • Maximum diameter: 2"
                                                                  2" Hill Acme model XN Upsetter with Magazine Feeder Re:25484 (2) avail
                                                                  $RFQ
                                                                  2" Hill Acme model XN Upsetter with Magazine Feeder Re:25484 (2) avail
                                                                  Dia 2 " Manufacturer Hill Acme w/Magazine Feeder Forge Tons 390 tons Grip Open 3.5 " Stroke 9 " SPM 55 Grip Tons 200 tons Ref #: 25484 Gather 6 " Hold 1.8 " Die spac
                                                                  • Maximum diameter: 2"
                                                                    1-1/4" Hill Acme model XN Upsetter with Magazine Feeder - Re:25487
                                                                    $RFQ
                                                                    1-1/4" Hill Acme model XN Upsetter with Magazine Feeder - Re:25487
                                                                    Dia 1.2 " Manufacturer Hill Acme w/Magazine Feeder Forge Tons 125 tons Grip Open 2 " Stroke 7 " SPM 75 Grip Tons 70 Ref #: 25487 Gather 3.8 " Hold 1.5 " Die space le
                                                                    • Maximum diameter: 1.25"
                                                                      72" x .135" x 55,000Lb Alcos - Cincinnati Loop Slitting Line
                                                                      $RFQ
                                                                      72" x .135" x 55,000Lb Alcos - Cincinnati Loop Slitting Line
                                                                      Material Width: 12" - 72" Material Thickness: .010" - .135" Weight Capacity: 55,000Lb Coil ID: 20" - 24" Coil OD: 72" Speed: 1000 feet per minute Direction: Left to Right En
                                                                      • Maximum workpiece width: 72"
                                                                      • Maximum workpiece thickness: 0.135"
                                                                        5,000 Lb. ROTARIAN #R1240 Pallet Uncoiler
                                                                        $RFQ
                                                                        5,000 Lb. ROTARIAN #R1240 Pallet Uncoiler
                                                                        UTUBE NUMBER: 3698 MANUFACTURER: ROTARIAN MODEL NUMBER: R1240 SERIAL NUMBER: NR2051 SPECIFICATIONS: Pallet-Type Horizontal Uncoiler Coil Weight Capacity, Maximum: 5,000 Lbs. Maximum Coil Diameter: 48″ Maximum S
                                                                        2,000 Lb. x 12″ LITTELL Single Uncoiler – Parts Only
                                                                        $RFQ
                                                                        2,000 Lb. x 12″ LITTELL Single Uncoiler – Parts Only
                                                                        UTUBE NUMBER: 3700 MANUFACTURER: LITTELL MODEL NUMBER: 20-12 SERIAL NUMBER: 8887-82-4 SPECIFICATIONS: Maximum Coil Weight: 2,000 Lbs. Maximum Coil Width: 12″ Coil I.D. Range: 16″ – 20″ Maximum Coil O.D.: 48″
                                                                        Used Mazak 18” x 60” Inch/Metric Gap Bed Engine Lathe
                                                                        $13,500
                                                                        Used Mazak 18” x 60” Inch/Metric Gap Bed Engine Lathe
                                                                        Specifications: Control ........................................... ACU-RITE 2-AXIS DRO Swing Over Bed ................................................... 18-1/8” Swing In Removable Gap ...............................
                                                                        • Swing: 18.125"
                                                                        • Centers: 60"
                                                                          2016 KALAMAZOO MODEL K10SW WET ABRASIVE SAW, 10” WHEEL
                                                                          $RFQ
                                                                          2016 KALAMAZOO MODEL K10SW WET ABRASIVE SAW, 10” WHEEL
                                                                          SPECIFICATIONS SPINDLE SPEED: 2,300 RPM MOTOR: 3 HP SPINDLE ARBOR: 5/8” ABRASIVE WHEEL: 10” GENERAL DIMENSIONS: 36” X 26” X 62” ELECTRICAS: 220 VOLTS, 1 PH WEIGHT: 300 LBS EQUIPPED WITH 10 GALLON
                                                                          • Blade diameter: 10"
                                                                            2005 TOS MODEL SN710S/4000 UNIVERSAL CENTER GAP BED LATHE, 28" X 160&q
                                                                            $RFQ
                                                                            2005 TOS MODEL SN710S/4000 UNIVERSAL CENTER GAP BED LATHE, 28" X 160&q
                                                                            WORKING CAPACITY SWING OVER BED: 28.3" SWING OVER CROSS SLIDE: 16.9" SWING IN GAP: 37.8" DISTANCE BETWEEN CENTERS: 156.7" MAXIMUM WEIGHT OF WORKPIECE: 3,306 LBS WIDTH OF GAP IN FRONT OF FACEPLAT
                                                                            • Swing: 28"
                                                                            • Centers: 160"
                                                                              USED TECHNICA MODEL ZSM-150 CENTER HOLE GRINDER, 2” X 43”
                                                                              $RFQ
                                                                              USED TECHNICA MODEL ZSM-150 CENTER HOLE GRINDER, 2” X 43”
                                                                              SPECIFICATIONS CONE ANGLE TO GROUND CENTER HOLES: 60° MAXIMUM DIAMETER OF GROUND CENTER HOLES: 2” MAXIMUM DIAMETER OF WORKPIECE: 5” MAXIMUM WORKPIECE LENGTH: 43” HEADSTOCK AXIS TO COLUMN FACE: 6” GRINDIN
                                                                              • Grinding wheel diameter: 2"
                                                                              • Maximum length: 43"
                                                                                16 Stand x 2.5″ x 24″ BRADBURY Rollformer, $44,000!
                                                                                $44,000
                                                                                16 Stand x 2.5″ x 24″ BRADBURY Rollformer, $44,000!
                                                                                Stock #2709 Model #315-B Serial #32646 Year: 1997 Direction: L-R Stands: 16 Spindle Dia: 2.5" Roll Space: 24" Vertical Adj: 4" – 5.5" Horizontal Centers: 9" Center Line of Lower Spindle to Base: 4"
                                                                                • # Stands: #16
                                                                                • Roll diameter: 2.5"
                                                                                  23 Stand x 2.5″ x 48″ ARDCOR Rollformer $59,000!
                                                                                  $59,000
                                                                                  23 Stand x 2.5″ x 48″ ARDCOR Rollformer $59,000!
                                                                                  Stock #3364 Model #F15-2-1/2-48 Serial #83-088 Year: 1983 Direction: R-L Stands: 23 on a 24 Stand Base Spindle Dia: 2.5" Roll Space: 48" Horizontal Center: 16" Vertical Adjustment: 5"– 9" Base Top to Center Low
                                                                                  • # Stands: #23
                                                                                  • Roll diameter: 2.5"
                                                                                    1.5″ (38.1mm) x .05″ (1.27 mm) MCKAY Tube Mill, $55,000!
                                                                                    $55,000
                                                                                    1.5″ (38.1mm) x .05″ (1.27 mm) MCKAY Tube Mill, $55,000!
                                                                                    Stock #1728 Model #S.O. #4414 OD Range: .50" (12.7mm) - 1.5" (38.1mm) Wall Thickness Range: .020" (.508mm) - .05" (1.27mm) D/T Ratio: 10:1 - 60:1 Max Material Yield: 50,000 PSI Max Mill Speed: 150 FPM (46 MPM) Max
                                                                                    • Maximum diameter: 1.5"
                                                                                    • Maximum thickness: 0.05"
                                                                                      2013 BAYKAL MODEL APH-3104 HYDRAULIC PRESS BRAKE, 10’ X 90 TON
                                                                                      $RFQ
                                                                                      2013 BAYKAL MODEL APH-3104 HYDRAULIC PRESS BRAKE, 10’ X 90 TON
                                                                                      SPECIFICATIONS CAPACITY: 90 TON BED LENGTH: 122” BETWEEN HOUSINGS: 100” STROKE: 6.3” OPEN HEIGHT: 12” BED HEIGHT: 34.2” THROAT: 16.1” MOTOR: 10 HP RAM SPEED APPROACH: 244 IPM BEND: 24 IPM RETURN: 188 IPM
                                                                                      • Tonnage: 90T
                                                                                        1998 HYD MECH MODEL S 20 SERIES II MANUAL CUT OFF SAW, 13" X 18"
                                                                                        $RFQ
                                                                                        1998 HYD MECH MODEL S 20 SERIES II MANUAL CUT OFF SAW, 13" X 18"
                                                                                        RECTANGLE CAPACITY: 13" X 18" ROUND CAPACITY: 13" DIAMETER 45° ROUND CAPACITY: 12" DIAMETER 45° SQUARE CAPACITY: 10" X 10" BLADE: 13' 6" L X 1" W X .032" THI
                                                                                        • Width capacity: 18"
                                                                                        • Height capacity: 13"
                                                                                          HARRISON MODEL M500 GAP BED GEARED HEAD ENGINE LATHE, 21" X 80"
                                                                                          $RFQ
                                                                                          HARRISON MODEL M500 GAP BED GEARED HEAD ENGINE LATHE, 21" X 80"
                                                                                          SWING OVER BED: 21" DISTANCE BETWEEN CENTERS: 80" SWING OVER CROSS SLIDE: 14-1/2" CENTER HEIGHT: 10-1/4” IN GAP DIAMETER: 28-3/4” IN GAP LENGTH: 7” HEADSTOCK SPINDLE BORE: 3-1/8” NOSE: D1-8 CAMLO
                                                                                          • Swing: 21"
                                                                                          • Centers: 80"
                                                                                            CINCINNATI MODEL 1810 MECHANICAL SHEAR, 10’ x 1/4”
                                                                                            $RFQ
                                                                                            CINCINNATI MODEL 1810 MECHANICAL SHEAR, 10’ x 1/4”
                                                                                            SPECIFICATIONS THICKNESS: 1/4” LENGTH: 10’ DISTANCE BETWEEN HOUSINGS: 10’3” MOTOR: 7 HP SPEED: 60 SPM FLYWHEEL SPEED: 1,200 RPM FRONT GAUGE RANGE: 47” BACK GAUGE RANGE: 36” HOLD DOWNS TO KNIFE EDGE: 5/8&quo
                                                                                            55 Ton 120" Bed Wysong 55-8 PRESS BRAKE
                                                                                            $10,500
                                                                                            55 Ton 120" Bed Wysong 55-8 PRESS BRAKE
                                                                                              55 TON x 10' WYSONG MECHANICAL PRESS BRAKE MODEL 55-8        S/N PB4-117        NEW 1974   TONNAGE, NEAR BOTTOM ................. 55
                                                                                            1997 Caterpillar 322BL ENCLOSED CAB W/ A/C & HEAT - Stock Number: E7221
                                                                                            $52,500
                                                                                            1997 Caterpillar 322BL ENCLOSED CAB W/ A/C & HEAT - Stock Number: E7221
                                                                                            6 CYL CAT ENGINE, 32 IN PADS, PLUMBING ON STICK, QUICK CONNECT, ENLCOSED CAB W/ A/C & HEAT, COMING IN SOON.
                                                                                            2009 Fryer MC-15 CNC Vertical Machining Center
                                                                                            $17,500
                                                                                            2009 Fryer MC-15 CNC Vertical Machining Center
                                                                                            Specifications: Control ...................................................... Anilam 6000i Touch Table Size ................................................................ 54” x 16" Max Table Load ...........
                                                                                            • X axis: 40"
                                                                                            • Y axis: 20"
                                                                                              Categories:
                                                                                              Condition:
                                                                                              Manufacturer:
                                                                                              Location:
                                                                                              Price:
                                                                                              •  to 
                                                                                              <Prev | 81 | 82 | 83 | 84 | 85 | 86 | 87 | 88 | 89 | 90 | Next>