buy & sell, new & used machinery, machine tools & equipment

Miscellaneous Equipment

Miscellaneous Equipment For Sale

2254 new & used miscellaneous equipment items for sale
<Prev | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | Next>
Refine: Viewing 901 - 1000 of 2254 matches
Sort by:
Items Per Page:  20 |  50 |  100
Bystronic, No. XY2-F-97R, 10' X 15'w/ Breakout Monitor Master Electrical Ctrl Nevins Machi
swpc(1,"http://uen.hsix.com/machpict/013510/101662.jpg")
14", Jones & Lamson, No. TC14, 5"X16"Tbl,4"Horiz Trvl,2"Vert Trvl
JONES & LAMSON TC 14 BENCH TYPE OPTICAL COMPARATOR #101665 Make: Jones & Lamson
Kearney & Trecker Milwaukee Horizontal Milling Machine
15" x 63" Table 7.5 Hp motor
New Saylor-Beall 10 Hp VT-755-120
10 Hp, 3 phase, 460 volt motor With Magnetic Motor Starter Model 707, 2 Stage Cast Iron pump 34.4 cfm air capacity @ 175 psi Mounted on 120 Gallon Vertical Air Receiver tank Low oil level switch Cylinde
New Saylor-Beall 5 Hp VT-735-80
5 Hp, 1 phase, 230 volt motor With Magnetic motor starter Model 705, 2 Stage Cast Iron pump 17.3 cfm air capacity @ 175 psi Auto Stop/Start control Mounted on 80 Gallon Vertical Air Receiver tank L34 x
New Saylor-Beall 5 Hp VT-735-80, 3 phase motor
5 Hp, 3 phase, 460 volt motor With Magnetic motor starter Model 705, 2 Stage Cast Iron pump 17.3 cfm air capacity @ 175 psi Auto Stop/Start control Mounted on 80 Gallon Vertical Air Receiver tank L34 x
USED JONES & LAMSON MODEL FC-14 OPTICAL COMPARATOR, 14"
SPECIFICATIONS SCREEN DIAMETER: 14″ C/L GLASS CHART WORK TABLE: 6″ X 30″ HARD CHROMIUM PLATED MEASURING CAPACITY LONGITUDINAL TABLE TRAVEL: 8″ MANUAL TRAVEL W/ ACU-RITE GLASS SCALE (.001mm/.00005″ RESOLUTION) VERTICAL T
  • Screen diameter: 14"
    JONES & LAMSON MODEL TC-14 OPTICAL COMPARATOR, 14"
    SPECIFICATIONS SCREEN DIAMETER: 14″ W/ RIGHT ANGLE & 60 DEGREE LINES WORK TABLE: 5″ X 16″ HARD CHROMIUM PLATED MEASURING CAPACITY LONGITUDINAL TABLE TRAVEL: 4″ MANUAL TRAVEL W/ ACU-RITE GLASS SCALE (0.001mm/0.0001″ RESO
    • Screen diameter: 14"
      1990 CHAMPION MODEL HRA25-12 AIR COMPRESSOR, 25 HP
      SPECIFICATIONS MOTOR: 25 HP PUMP MODEL: R-70A 125 PSI RATING: 890 RPM, 127.8 CFM DISP, 102.1 CFM DEL 175 PSI RATING: 770 RPM, 109.4 CFM DISP, 90.1 CFM DEL ELECTRICS: 440 VOLTS, 3 PH, 60 CYC, 5 HP EQUIPPED WITH 120 GALLO
      TORIT DMC-B DRYFLO OIL & MIST COLLECTOR - 630 CFM
      SPECIFICATIONS MAXIMUM AIRFLOW: 630 CFM HEIGHT WITH LEGS: 79″ DEPTH: 29″ WIDTH: 28″ THIRD STAGE CARTRIDGE FILTER AREA: 82 (SQ FT) NUMBER OF CARTRIDGES: 1 GENERAL SHIPPING WEIGHT, APPROX: 500 LBS ELECTRICS: 110 VOLTS, 1
      1994 - HANKISON 80400 WATER COOLED AIR DRYER - 400 SCFM
      SPECIFICATIONS MINIMUM-MAXIMUM OPERATING CONDITIONS MIN INLET AIR PRESSURE (COMPRESSED AIR AT INLET TO DRYER): 10 PSIG (.70 BAR) MAX INLET AIR PRESSURE (COMPRESSED AIR AT INLET TO DRYER): STANDARD: 200 PSIG (14 BAR) OPT
      • Cubic feet per minute: 300CFM
        MARELCO CL000876-14 TRANSFORMER - 50 KVA
        SPECIFICATIONS PRIMARY VOLTS – 200/230/380/415 V DELTA SECONDARY – 230 WYE +/- 5% + 10% TAPS WITH NEUTRAL
        • Power: 50KVA
          MARELCO PTM-9263E TRANSFORMER - 50 KVA
          SPECIFICATIONS PRIMARY: 208 VOLTS SECONDARY: 230 VOLTS KVA RATING: 50
          • Power: 50KVA
            MARELCO M10523FE ELECTRIC TRANSFORMER - 35 KVA
            SPECIFICATIONS 35 KVA PRIMARY VOLTAGES: 200, 230, 415, 460 475 VOLTS SECONDARY VOLTAGE: 230 VOLTS
            • Power: 35KVA
              Bowden/Ransahoff Liquid Turbo-Charger Parts Washer
              Liguid Turbo-Charger Parts washer, used but in good condition. "The 'liquid Turbo-Charger'TM vigorously agitate the cleaning fluid to accelerate and enhance the detergent action and to prevent oil cont
              Roders Tec High Speed Milling Machine RXP500DSC Dental
              HIGH SPEED MILLING MACHINE TYPE: RXP 500 DSC BASE MACHINE: 1. Intel Pentium based Roeders High Speed CNC Control RMS6 2. Machine work-piece table (type RXP500DSC): Table: Machine table (7.8” diameter). X-axis
              Pellet Mill System
              Complete Pellet Mill System without a bagger. The Pellet Mill is a 100 HP Sprout Waldron and comes with 3 extra dyes. The Cooling System is a Colorado Mill System capable of producing up to 2 tons of pellets per hour. As
              New Milton Roy HPD Pumps
              2 new Milroyal C Series, model number : MCHBG1-8G-PE-AAM1S-ESTNNNN11 High Performance Diaphragm ( HPD- Liquid End ) pumps , rated capacity is 48.6 GPH, 2900 PSI, 5 HP Reliance electric motor. Still in original factory cr
              Complete bagging system for sale
              This system has a Flexicon bulk bag unloading frame with a 2 ton electric hoist, a knife bag piercing station and a air vibrating hopper to prevent clogging. A ECC power auger fed, open mouth bagging machine with air ope
              New Ingersoll Rand 60 HP Rotary Screw EP60 460v230v 3phase 125psi max
              Brand still factory wrapped. The unit was manufactured August 2013. New replacement units are $35,000, save $7,000 It is available immediately and is located in Iowa. The unit is about 72" x 72" x 72" a
              • Motor: 60HP
                Filters for Keller & Handte Trumpf Users.
                That is the type we offer for Trumpf users. Expect Savings of $150. to $200 per filter! There are 6 to 8 filters per Handte unit.
                100 HP INGERSOLL RAND ROTARY SCREW AIR COMPRESSOR, MODEL SSR-EP100
                100 HP INGERSOLL RAND ROTARY SCREW AIR COMPRESSOR MODEL SSR-EP100 MANUFACTURED 1997 RACO Stock Number R017499 CAPACITY ---------------------------------- 446 CFM RATED OPERATING PRESSURE ---------------- 125 PSI
                • Motor: 100HP
                  MODEL NO. RC400-12, ROTO TECHNOLOGY GEAR ANALYZER
                  EQUIPPED WITH: Rotary Table Validating Block Probe Scale AAA Design Tailstock SPECIFICATIONS: Base: 36 x 36, 915 x 915 X-Axis: 8", 203mm Y-Axis: 12", 305mm Z-Axis: 18", 305mm
                  LIETZ METALLOPLAN LARGEFIELD METALLOGRAPHIC MICROSCOPE--BINOCULAR
                  EQUIPPED WITH: Biocular (4) Lenses Electric Powerlamp Operators Manual SPECIFICATIONS: Stage: 7" x 12" Travel Front to Back: 3.75"
                  HYDRAULIC UNIT FROM 3 TON, 36" STR. APEX HORIZONTAL BROACH
                  EQUIPPED WITH: (2) 20 HP Motors (2) Vicker Hydraulic Pumps CATALOG SPECIFICATIONS: Tank Dimensions: 40" x 30" x 36" F.O.B., TRUCK, WARREN, MI
                  DELCO, 100 HP, 1190 RPM, MOTOR
                  EQUIPPED WITH: 100 HP 1190 RPM Frame H504 SC Volts 440 Amps 116 Shaft Size 2 7/8 Key Way 3/4
                  100 HP, 890 RPM, 460 V., DELCO, Frame 505,
                  EQUIPPED WITH: 100 HP 890 RPM Frame 505 Phase 3 Volts 460 Map 133 Shaft Size 3 1/2" Key Way 7/8
                  PARTEK/NLB CORP. HYDRAULIC PUMP W/50 HP ELECTRIC MOTOR
                  SPECIFICATIONS: Flow: 14.5 GPM Pressure: 5000 PSIG Motor RPM: 1750 Pump RPM: 527 Drive Pulley: 8.5" Center Distance: 22.2 No. Of Belts: 3 Belt Series: 5V1060 Motor Bushing: SF Pump Bushing: E
                  Industrial Engineering Equipment Company, Portable 60 Ton Puller,
                  Industrial Engineering Equipment Company, Portable 60 Ton Puller, SN 6996 General Specifications: Approx. 23” to 55” Arm Adjustment 120 VAC Electric Hyd. Pump w/ remote control operator box Condition: Good
                  ELOX –EDM  HRP65 Sinker
                  ELOX –EDM HRP65 Sinker SN/ 400884 General Specifications: W/Controller Condition: Good PRICE: F.O.B. Rochester “as-inspected” $500.00
                  Littell #5  10” Auto Centering Spindle Reel, Double End
                  Littell #5 10” Auto Centering Spindle Reel, Double End SN 86237.80.2 General Specifications: Keepers 8 Max Coil Dia. 36.46” Max Coil Width 10” Coil 6” to 16” Eye Range 10” to 20” OD 48
                  Dividing Heads
                  Cushman Chuck Co./Ref. # C-1397-1 Van Norman/SN: 2-5100 Ellis/SN: H-126019 F. T. Griswold Mfg./SN: 53/Model: 47/Date: 8-21-61 Pictures per request Each Dividing Head is $800.00 each
                  IEMCA Prodigy 547/21, 6' Magazine Style Barfeeder
                  General Specifications: Bar Size Capacity: 3/16" - 2" Bar Lenth Capacity: 6' Maximum Capacity of Magazine Rack: 16 Linear Inches Max Feed Speed: 20" Per Second Return Speed: 31&
                  30" Screen 18 Jones  Lamson EPIC-230 OPTICAL COMPARATOR, Metronics Quadra-Chek 2000 2
                   30" JONES & LAMSON (MADE IN USA)                     OPTICAL COMPARATOR & MEASURING MACHINE  &nb
                  • Screen diameter: 30"
                    Multi-Bag Filter Housing (3 bags) and Single Filter Housing
                    Housing Specifications: Shell: 189 L Stainless Steel Surface: Acid-Washings, Electrolyze and others Bag specifications: Filter big No. 2 Design P. :10Kg/Cm^2 Operation P. :7Kg/Cm^2 Design T. : 100 Celsius/212 Fah
                    BOLENS TROYBUILT MTD CUB PTO FIELD COIL PN 1754151 OGURA MA-GT-BN/BN1/BN2
                    BOLENS PTO FIELD COIL PN 1754151 / OGURA MA GT BN1/BN2/B2 - $172 (NOTTINGHAM, NH) RE-BUILT IN A 30 PERSON SHOP SPECIALIZING IN MOTORCYCLE AND RV ELECTRONICS WITH USA SUPPLIED COMPONENTS - MADE IN NEW HAMPSHIRE, USA. R
                    LITTLEFORD MGT VERTICAL GRANULATOR/MIXER    #3405
                    One used Littleford Vertical Granulator/Mixer Model MGT 125, 316 stainless contact parts, air purge seals, working capacity 100 LITERS (26.4 GAL.). main drive is 10.5 h.p., chopper drive 7.5 h.p., MISSING BOTH MIXING BLA
                    BLAW-KNOX 900 GALLON JACKETED TANK
                    One Blaw-Knox 900 gallon jacketed mixer, stainless steel, top manhole and view window, side and bottom sweep agitator, jacket rated 40 psi @ 300 deg. F., the shell dimensions are 79" straight side x 60" diameter,
                    500 GAL. LEE JACKETED KETTLE
                    JACKET RATED 90 PSI AT 332 DEG F. BUILT 1978. NATIONAL BOARD 2309. WAS MEZZANINE MOUNTED, SO IT HAS LEG MOUNTS BUT NO LEGS.
                    GLATT QUICK SIEVE
                    ONE USED GLATT QUICK SIEVE, STAINLESS/GMP CONSTRUCTION. COMPRESSED AIR PRESSURE 6 BAR, WITH .08 SCREEN. 220/60
                    $1,000
                    ANIMAL CAGES
                    TWO PER STACK
                    Vorti-Siv RVM15E Sieve
                    One used Vorti-Siv RVM15E Sieve, Serial 15193E, with 30.25" funnel height, 6" high main rim asy. and 1/3 h.p. motor, with manual.
                    AZO 117 cfm Vacuum Pump
                    On the pump: Type RC0160-B082-1001 Serial C 5658 Displacement 117 cfm vacuum 29.3 HG on panel: Item 2.08 Job 6838
                    Glatt GPCG300 Fluid Bed Granulator w/ 2 Wursters
                    One used Glatt Fluid Bed Dryer/Granulator, Model GPCG300, stainless steel construction, 2 bar capacity with Wurster insert, less controls.
                    Fryma VME-12 14 liter Triple-motion Vacuum Mixer
                    One used Fryma VME-12 14 liter Triple-motion Vacuum Mixer, built 1988, 3 bar jacket, -1 bar vessal, with sweep, disperser and emulsifier, built 1988, serial M13315
                    Patterson Kelley 75 c.f. s.s. V-blender
                    One used 75 cu ft Patterson Kelley twin shell blender, stainless steel construction, rated 60#/ cu ft max material density, standard feed ports with covers, 8" outlet with butterfly valve, on stands with 30.5" stan
                    LENZE MOTOR, 180/200 V
                    LENZE MOTOR, 180/200 V
                    WORCESTER ELECTRIC ACTUATOR
                    WORCESTER ELECTRIC ACTUATOR
                    Sartorius BP211D 210 gram Balance
                    ANALYTICAL BALANCE; With Sartorius YDP-03-OCE Printer, Max Capacity 210 g sn LB1249
                    $RFQ
                    Nuaire
                    Nuaire
                    Lepel TR-2 Sealing Head
                    One used Lepel TR-2000 Induction Sealer complete with a (New Never Used) Lepel Model LWA-3 SN F-2323-30 recirculator/chiller. The TR-2000 is a 2.3 KVA unit, 230 volts, 50/60 cycles, 3 phase. Recirculator is 115 volts, 50
                    Patterson-Kelley MVP V-blender w/ 5 & 2 c.f. bowls
                    One (1) used 5/2 cu ft Patterson Kelley twin shell blender system, model MVP, stainless steel construction, 5 and 2 cu ft stainless steel shells with high speed intensifier bars and carts, rated 62#/ cu ft max material d
                    APV Anhydro Triple-Tube Pasteurizer, 4 gal/min, sanitary
                    One used APV Anhydro Triple-tube Pasteurizer, 4 gal/min, Sanitary, 316 stainless steel product side, National Board No 56612, with APV Crepaco 3 h.p. M-series Rotary Lobe Pump Model M1-012-20, serial P8842, rated to 290
                    Walker SP 200 L Dome Top Agitated Pressure/vacuum
                    One used Walker SP 200 L Dome Top Agitated Pressure/vacuum Vessel 50PSI/FV @ 300F Tank, 50 Psi @ 300F and -20F @ 50 Psi Jacket, Top Mounted Lightning Agitator, CIP, Legs Mounted on Casters 
                    Bebco 1003-LPS Type 2 Rapid Exchange Purge System
                    One used Bebco 1003-LPS Type 2 Rapid Exchange Purge System Mounted 
                    Model D Kaps All Capper
                    One (1) used Kaps All inline capper, model D, 4 spindle, speeds up to 80 bottles/minute with side gripper belts, cap feeder and feed conveyor, serial# 2063.
                    Onan 1250 KW Generator
                    One used Cummins 1500 kW standby (1250kW prime) diesel generator set. Cummins Model 1500DFLE-1062, SN-F000120499. Cummins KTA50-G9 engine rated 2220 HP @ 1800 RPM, SN-33146315. 3/60/480V. PowerCommand digital control pan
                    Changzhoushi Jiafa fluid bed dryer. Model: GFG500
                    One used Changzhoushi Jiafa fluid bed dryer. Model: GFG500. Serial: 118. MFG in: 2008. This machine is suitable for drying powder or granule. Meets GMP requirements. Batch capacity: 500 kg. Includes: touch scre
                    Bosch KKE 1500/BOB
                    Bosch KKE 1500/BOB
                    Quadro 196S Comil
                    Quadro 196S Comil
                    $RFQ
                    CIP System
                    One used
                    $RFQ
                    Tolan Tank
                    Tolan Tank
                    Basket Centrifuge
                    2 available
                    Henkel HF600
                    Henkel HF601
                    SafeLine Metal Detector
                    SafeLine Metal Detector
                    Atlas Heat Exchanger
                    Atlas Heat Exchanger
                    SafeLine Metal Detector
                    SafeLine Metal Detector
                    Patterson-Kelly 10 c.f. Liquids-Solids V-blender, x-proof
                    Patterson-Kelly 10 c.f. Liquids-Solids V-blender, x-proof
                    Bohle Blender
                    Bohle Blender
                    Glass-lined Reactor
                    5 available
                    Gral 75l Control Box
                    Gral 75l Control Box
                    250 liter s.s. Tank
                    251 liter s.s. Tank
                    Seidenader V90-T Vial Inspection Machine
                    One used Seidenader V90-T Vial Inspection Machine, .5 ml to 1000 ml, tyndell lights, 110/60/1, serial 164/87
                    30" Russel Sieve
                    One (1) used 30" Russel Sieve, model CD18-130, 30" diameter, single deck with single vibro motor, 230/460 volt, serial# 070609748.
                    APV Crepaco R4TS Pump
                    One used  APV Crepaco R4TS Pump, 7.5 hp, 230/460/60/3
                    APV Crepaco R3TS Pump
                    One used  APV Crepaco R3TS Pump, 5 hp, 230/460/60/3
                    Hankinson Nitrogen System w/ 40 hp Compressor
                    Hankinson Nitrogen System w/ 40 hp Compressor
                    Bosch TL System
                    Bosch TL System
                    30 liter Alegany Reactor w/ Agitator
                    30 liter Alegany Reactor w/ Agitator
                    1450 gallon Feldmeier Reactor w/ Agitation
                    One used 1,450 gallon Feldmeier Reactor, stainless steel, 6'6" dia. x 6' straight side with dishh top and bottom, 5 zone jacket rated for 50/FV psi @ 176 Deg F, vessel rated for 25 PSI @ 176 Deg F internal. agitated with
                    MASCHMPEX                                   #2633
                    THIS IS A 10'L x 1'W CONVEYOR, SERIAL #311-28. IT USES 230 VOLTAGE AND WAS BUILT IN 1984.
                    UHLMANN HSIIIS STRIP WRAPPER                #3633
                    MANUFACTURED 1970, MOUNTED ON CASTERS, EQUIPPED WITH A MARKEM MODEL 236M IMPRINTER. 115 VOLTS, CONTROL VOLTAGE IS 220.
                    BESELER WRAPPER
                    THIS IS A PULL DOWN WRAPPER
                    PESTER PEWO FOLD ZP OVERWRAPPER                #3333
                    One used Pester PewoFold Overwrapper Model ZP, built 1985 and is mounted on casters, 220 volt, 3 phase, max. package size is 250mm length x 400mm width x 140mm height, max. sealing width is 400mm. In addition
                    PESTER PEWO FOLD                            #3725
                    One Pester Pewo Fold Wrapper, built 1985, on casters, 220/50/3, max. length is 250mm, 400mm width and 140mm height, max seal is 400mm
                    LANTEK MODEL SH25A05606809 WRAPPER
                    LANTEK MODEL SH25A05606809 WRAPPER
                    OMEGA OVERWRAPPER AND HEAT TUNNEL
                    TUNNEL IS 21" WIDE X 11" HIGH
                    ARPAC MODEL 118-20 SHRINK WRAPPER
                    with Manual
                    Mustang DoBoy Wrapper Model J
                    Mustang DoBoy Wrapper Model J
                    Uhlman Type 79 Wrapper
                    Uhlman Type 79 Wrapper
                    Pester Pewo-Pack 450 SN Wrapper
                    One used Pester PEWO-Pak shrink wrap bundler, model 450, with shrink tunnel, serial# 3037, new 1994. Max. package size is 300mm length X 540mm width X 250mm height. Max. sealing width is 450mm.
                    Siat Stretch Wrapper
                    One used Siat Stretch Wrapper
                    Mimi Uniblock FF 680 mm Sleeve Wrapper
                    Mimi Uniblock FF 680 mm Sleeve Wrapper with collatting unit and side in-feed belt and pusher rated to 15 packages/minute
                    Mimi Uniblock 715/FF2 680mm Wrapper
                    built 2001, rated 15/minute
                    Scandia Carbon Steel Bundler Wrapping
                    One used Scandia Carbon Steel Bundler Wrapping
                    Omega SL-18 Bundler
                    One used Omega Design TSB-SL18 shrink bundler. Capable of speeds from 120 to 150 BPM depending on container and pattern. Max container height: 11". Max film width: 17" Single lane unit, , traveling seal bar design, all s
                    Cornell D-8 Versator
                    One Cornell Model D-8 Versator, rated to 2 gpm, stainless steel contact parts, mounted on cart, main motor 2 H.P., 3450 RPM, 230/460/60/3
                    Cornell D-26 Versator
                    One used Cornell D-26 Versator, rated 5 to 125 gpm, 25 h.p. drive, serial 6440R, with 7.5 h.p. Sihi Vacuum Pump Model LPHB45312, 230/460/60/3
                    Rietschel Thomas VC300 10 hp Vacuum Pump
                    Rietschel Thomas VC300 10 hp Vacuum Pump
                    Price:
                    •  to 
                    <Prev | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | Next>