buy & sell, new & used machinery, machine tools & equipment

<Prev | 461 | 462 | 463 | 464 | 465 | 466 | 467 | 468 | 469 | 470 | Next>
Refine: Viewing 9281 - 9300 of 19757 matches
Sort by:
Items Per Page:  20  |  50 |  100
96" x 60,000Lb P/M Double Mandrel Uncoiler
$RFQ
96" x 60,000Lb P/M Double Mandrel Uncoiler
Make: P/M (Production Machinery) Serial # 145-150 Weight Capacity: 60,000Lb Material Width: 6" - 96" Dual Expandable Mandrels Dual Sliding Base Powered Hold-Down Rolls One Mandrel was Recently Painte
  • Maximum weight capacity: 60000Lb
  • Maximum coil width: 96"
    10 TON POWER TEAM HYDRAULIC H-FRAME PRESS
    $RFQ
    10 TON POWER TEAM HYDRAULIC H-FRAME PRESS
    10 TON POWER TEAM HYDRAULIC H-FRAME PRESS Stock # K14140 EQUIPPED WITH: H-Frame Design, Power Team R10-6SA Hydraulic Cylinder, Power Team HF-32 Hydraulic Pump, 2-Speed Hydraulic Hand
    • Tonnage: 10T
    • Stroke: 6"
      72" x 60,000Lb Aetna - Standard Uncoiler
      $RFQ
      72" x 60,000Lb Aetna - Standard Uncoiler
      Make: Aetna-Standard Mandrel Width: 84" Weight Capacity: 60,000Lb Coil ID: 24" Coil OD: 72" Powered Mandrel Expansion Sliding Base Motirized Brake Feed-Up Motor Drive
      • Maximum weight capacity: 60000Lb
      • Maximum coil width: 72"
        72" x .135" Bronx 4-Hi Precision Leveler
        $RFQ
        72" x .135" Bronx 4-Hi Precision Leveler
        Make: Bronx Material Width: 12" - 72" Material Thickness: .020" - .135" Work Roll Diameter: 1.75" Work Roll Width: 77" Number of Work Rolls: 19 Number of Back-Up Flights: 9 Driven
        • Width: 72"
        • Thickness: 0.135"
          61' Steel I-beam bridge
          $8,500
          61' Steel I-beam bridge
          61' span steel I-beam bridge frame with 5 cross pieces. I-beams measure 3'x12". Bolts and nuts fasteners included. Width of span stringers center to center will accommodate the wheel base of a ten yard du
          3/16" National Single Stroke Solid Die Cold Header
          $RFQ
          3/16" National Single Stroke Solid Die Cold Header
          No description providedMaximum Wire Diameter3/16" Maximum Shank Length1" Maximum Cutoff Length1-1/2" Maximum Production300 PPM Approx. Weight4,000 lbs AC Motor &am
          THK Ball Screws X and y axis
          $1,490
          THK Ball Screws X and y axis
          One is 10-feet in length, One is 5-foot length, $1,490.00 Plus Freight Re-balled with new properly sized ball bearings.
          CLEARANCE! 6000 Lb x 20″ EGAN #M601-20 Single Uncoiler
          $6,000
          CLEARANCE! 6000 Lb x 20″ EGAN #M601-20 Single Uncoiler
          Capacity: 6000 Lbs Max Width: 20″ ID Range: 16″–20″ Max OD: 60″ EQUIPPED WITH: Manual Expansion 4-Arm Brake 2 Keepers NOTE: Air motor needs work DIMENSIONS: 5′ x 3′ x 5′ APPROX WEIGHT: 4000 Lbs LOCATIO
          • Maximum weight capacity: 6000Lb
          • Maximum coil width: 20"
            50 Ton Used Airam Cut Off Press With Large Bed, Mdl. 3562, Note: New Replacement Cost $ 61
            $12,500
            50 Ton Used Airam Cut Off Press With Large Bed, Mdl. 3562, Note: New Replacement Cost $ 61
            Tonnage 50 Bed Size (L- R, F- B) 70" x 51" Distance Between Guide Pins (L- R, F- B) 61" x 32 1/2" Stroke 3" Guide Pins Diameter 2 1/2" Dimensions (L x D x H) 70" x 70" x 84" WEIGHT 10,000 Lbs.
            75 Ton x 5" Used Minster OBS Punch Press, Mdl. 70-4-1/2, Bolster Plate with Ball Tran
            $29,500
            75 Ton x 5" Used Minster OBS Punch Press, Mdl. 70-4-1/2, Bolster Plate with Ball Tran
            Tonnage 75 Tons Stroke 5" Opening Between Uprights 18-1/2" Shank Szie 2" Ram Area 18" x 24" Throat 11" Dimensions (W x D x H) Control Box 37" x 13" x 61" Dimensions (W x D x H) (Machine) 70" x 78
            25 Ton x 3" Used Rousselle Gap Frame OBI Punch Press (Single Crank), Mdl. #3G, Air Tr
            $5,950
            25 Ton x 3" Used Rousselle Gap Frame OBI Punch Press (Single Crank), Mdl. #3G, Air Tr
            Tonnage 25 Stroke 3" Shut Height 9 3/4" Bed Size ( L-R, F-B ) 20" x 14" Ram Size ( L-R, F-B ) 8 1/4" x 5 1/2" Throat 18" Strokes Per MInute 135 WEIGHT 4400 Lbs. Electric Foot Pedal Air Tri
            20 Ton x 2" Used Benchmaster High Speed Press, Mdl. 20-4-2424-2-14-PP 20/300-787F, Re
            $5,500
            20 Ton x 2" Used Benchmaster High Speed Press, Mdl. 20-4-2424-2-14-PP 20/300-787F, Re
            Stroke 2" Bed Area 24" x 24" Shut Height 14" Strokes Per MInute 20 - 300 Reeves Variable Speed Drive Hydraulic Overlaod Protection Palm Button Controls W/Emergency Stop Auto Lube System Pedestal
            20 Ton x 1-1/4" Used Minster High Speed Punch Press, Mdl. P2-20-24, Air Clutch & Brak
            $17,500
            20 Ton x 1-1/4" Used Minster High Speed Punch Press, Mdl. P2-20-24, Air Clutch & Brak
            NOTE:  This press is set up in Jog Mode right now.  Depending on which feeder you use it will need to be customized to your setup.  Press Runs well.  Rear Feeder is currently connected.  The Vam
            35 Ton x 15" Used Denison Hydraulic MultiPress (C Frame Style), Mdl. SPLA35C, Safety
            $9,950
            35 Ton x 15" Used Denison Hydraulic MultiPress (C Frame Style), Mdl. SPLA35C, Safety
            Tonnage 35 Stroke 15" Bed Size (L-R, F- B) 20" x 30" Bore 4-3/4" Ram 3-1/4" PSI Rating 3950 Horsepower 30 H.P. Voltage WEIGHT 15,000 Lbs. Voltage 440v 3-Phase Note: This Machine Was O
            30 Ton x 18" Used Logan Hydraulic Press, Mdl. 6000 D-10, Tonnage Indicator, Foot Trea
            $6,500
            30 Ton x 18" Used Logan Hydraulic Press, Mdl. 6000 D-10, Tonnage Indicator, Foot Trea
            Tonnage 30 Stroke 18" Daylight 19" Throat Depth 8 1/2" Bed Area (L-R, F-B) 24 1/2" x 14" Ram Area 6" Ram Cylinder Diameter 4" Type C-Frame Horsepower 15 H.P. Dimensions (LxDxH) 34" x 60" x
            60 Ton x 6" Used Savage 4 Post Hydraulic Blanking Trim Press, Mdl. 60HTP, STI Minisaf
            $32,500
            60 Ton x 6" Used Savage 4 Post Hydraulic Blanking Trim Press, Mdl. 60HTP, STI Minisaf
            For Questions on Specifications please contact http:www.Savagepress.com Note:  This machine has 3 Pieces.  Press, Electrical Cabinet and the Hydraulic Pump.SAVAGE 4 post presses are built with very long b
            50 Ton x 18" Used Hannifin Hydraulic Press, Mdl. 500-41, Tonnage Gauge, #6649
            $11,500
            50 Ton x 18" Used Hannifin Hydraulic Press, Mdl. 500-41, Tonnage Gauge, #6649
            Tonnage 50 Stroke 18" Daylight 18" Bed Size (L-R, F-B) 40 1/2" x 24" Ram Size (L-R, F-B) 23" x 22" Ram Cylinder Diameter 5 1/2" Type C-Frame Horsepower 15 H.P. Dimensions (LxWxH) 70" x 50" x 1
            25 Ton x 3/4" Used Bliss High Speed Punch Press, Mdl. , Shut Height Indicator, Bliss
            $21,500
            25 Ton x 3/4" Used Bliss High Speed Punch Press, Mdl. , Shut Height Indicator, Bliss
            Capacity 25 Ton x 3/4" Bed Area (F-B, L-R) 24" x 18" Stroke 3/4" Crankshaft Diameter 2-1/2" Strokes Per Minute ( Variable ) 220 - 660 SPM Shut Height 10-1/2" Horsepower 5 H.P. WEIGHT 7,000 Lbs.
            250 Ton Used Best Press Hydraulic Powder Compacting Press (Up And Down Acting), Mdl. JC-14
            $65,000
            250 Ton Used Best Press Hydraulic Powder Compacting Press (Up And Down Acting), Mdl. JC-14
            This press was pressing Zerconium Oxide into the round white pucks you see in the photos.It was recently reconditioned including-- New hydraulic fittings- New Hydraulic Seals- Hydraulic container cleaned and conditioned
            32 Ton x 4" Used Minster OBI Press As IS Machine, Mdl. #4, Foot Pedal, #20000-36-60-H
            $12,000
            32 Ton x 4" Used Minster OBI Press As IS Machine, Mdl. #4, Foot Pedal, #20000-36-60-H
            Tonnage 32 Stroke 4" Shut Height 11 1/2" Bed Size (L-R, F-B) 24" x 15" Ram Size (L-R, F-B) 15" x 10 1/2" Throat 8 1/4" Opening Thru Back 11 1/2" Strokes Per MInute 100 Horsepower 3 H.P. Clu
            Categories:
            Condition:
            Manufacturer:
            Location:
            Price:
            •  to 
            <Prev | 461 | 462 | 463 | 464 | 465 | 466 | 467 | 468 | 469 | 470 | Next>