buy & sell, new & used machinery, machine tools & equipment

<Prev | 181 | 182 | 183 | 184 | 185 | 186 | 187 | 188 | 189 | 190 | Next>
Refine: Viewing 9251 - 9300 of 19764 matches
Sort by:
Items Per Page:  20 |  50  |  100
1991 EATON LEONARD MODEL VB200HP CNC ROTARY TUBE BENDER, 2" x .145&quo
$RFQ
1991 EATON LEONARD MODEL VB200HP CNC ROTARY TUBE BENDER, 2" x .145&quo
SPECIFICATIONS BENDING CAPACITY MAXIMUM BENDING CAPACITY: 2” OD X .145” WALL MAXIMUM CENTERLINE BENDING RADIUS: 8” MAXIMUM TRAVEL OF BEND ARM: 195 DEGREES MAXIMUM POB DEGREES: UNLIMITED SPEEDS: 30 RPM – DEGREE
  • Maximum diameter: 2"
    DENISON C-FRAME HYDRAULIC PRESS, 8 TON
    $RFQ
    DENISON C-FRAME HYDRAULIC PRESS, 8 TON
    SPECIFICATIONS CAPACITY: 8 TON STROKE: 12" DAYLIGHT: 18" THROAT: 8" BED AREA: 10" X 16" GENERAL ELECTRICS: 480 VOLTS, 3 PH, 60 CYC DIMENSIONS 24” LR X 48” FB X 77” H EQUIPPED
    • Tonnage: 8T
    • Stroke: 12"
      DENISON C-FRAME HYDRAULIC PRESS, 8 TON
      $RFQ
      DENISON C-FRAME HYDRAULIC PRESS, 8 TON
      SPECIFICATIONS CAPACITY: 8 TON STROKE: 12" DAYLIGHT: 18" THROAT: 8" BED AREA: 10" X 16" GENERAL DIMENSIONS: 24” LR X 48” FB X 80” H SHIPPING DIMENSIONS: 48” LR X 48” LR X 80” H E
      • Tonnage: 8T
      • Stroke: 12"
        60" x 7" Paxson Slitting Head
        $RFQ
        60" x 7" Paxson Slitting Head
        Make: Paxson Arbor Width: 67" Arbor Diameter: 7" Adjustable Arbors Feed-Up Motor & Gear Box
        • Maximum workpiece width: 60"
        • Maximum workpiece thickness: 0.187"
          60" x 40,000Lb Paxson Recoiler
          $RFQ
          60" x 40,000Lb Paxson Recoiler
          Make: Paxson Mandrel Width: 62" Coil ID: 20" Coil OD: 72" Powered Gripper Powered Push-Off Motor: 50HP DC 650 / 2500 RPM
          • Maximum weight capacity: 40000Lb
          • Maximum coil width: 60"
            2000 Hitachi Seiki Model HT-23RIII CNC Lathe Seicos Control
            $34,995
            2000 Hitachi Seiki Model HT-23RIII CNC Lathe Seicos Control
            Year: 2000 Make: Hitachi Seiki Model: HT-23R III Condition: Good Electrical: 230/3Phase Machine Status: Under Power Shipping Info: Rigging Fee Extra Weight: 10500 Dimension: L x W x H 12' x 7' x 8&
            2013 INGERSOLL RAND UP6-40-125 ROTARY SCREW AIR COMPRESSOR & AIR DRYER
            $9,500
            2013 INGERSOLL RAND UP6-40-125 ROTARY SCREW AIR COMPRESSOR & AIR DRYER
            MOTOR VOLTAGE: 460 VOLT AC PHASE: 3 PHASE ENGINE: 40 HP PUMP CFM: 181 CFM RATES @: 125 PSI PUMP TYPE: ROTARY MAXIMUM PSI: 125 PSI AFTER COOLER: YES PUMP DRIVE: BELT DRIVE OIL TYPE: OIL LUBRICATED GENERAL
            2006 Calypso CNC water jet
            $57,995
            2006 Calypso CNC water jet
            Year: 2006 Make: Calypso Model: Hammerhead Condition: Good Machine Status: Not Under Power Shipping Info: We can load Weight: 6000 Dimension: L x W x H Machine Location: City: On Request State: Florida
            Pines # 2 hyd. Mandrel tube bender
            $69,795
            Pines # 2 hyd. Mandrel tube bender
            Year: ? Make: Pines Model: #2 Condition: Excellent Electrical: 208/3Phase Machine Status: Under Power Shipping Info: We can load Weight: 4500 Dimension: L x W x H 8ft x 4 ft x 4 ft Machine Location: Ci
            Mori Seiki # NT1000 / WZ Integrated Mill / Turn Center
            $155,995
            Mori Seiki # NT1000 / WZ Integrated Mill / Turn Center
            Year: 2010 Make: Mori Seiki Model: NT1000 / WZ Condition: Excellent Electrical: 230/3Phase Machine Status: Under Power Shipping Info: Rigging Fee Extra Weight: 18740 Dimension: L x W x H 106.5 x 95.5 x 93.
            2012 Okuma Multus B200II turning/milling center
            $409,990
            2012 Okuma Multus B200II turning/milling center
            Year: 2012 Make: Okuma Model: Multus B200II Condition: Excellent Electrical: 230/460/3 wired 460 Machine Status: Under Power Shipping Info: Rigging Fee Extra Weight: 25000? Dimension: L x W x H Machine
            10' x 1/4" NIAGARA SPARTAN SP10-1/4 HYDRAULIC SQUARING SHEAR
            $RFQ
            10' x 1/4" NIAGARA SPARTAN SP10-1/4 HYDRAULIC SQUARING SHEAR
            10' x 1/4" NIAGARA SPARTAN SP10-1/4 HYDRAULIC SQUARING SHEAR S/N S65791 NEW 1991 SHEARING CAPACITY -- ( MILD STEEL ) ------- 10' X 1/4" SHEARING CAPA
            • Maximum thickness: 0.25"
            • Cutting length: 10"
              Best 960 Radial Arm Saw
              $4,392
              Best 960 Radial Arm Saw
              The Best 960 radial arm saw offers adaptability, versatility, precision and durability to shops of all sizes. THREE PHASE MOTOR POWER 4 (3) Hp (Kw) SINGLE PHASE MOTOR POWER 3 (2.2) Hp (Kw) MOTOR SPEED 3360 DIAME
              Junior 640 Radial Arm Saw
              $3,832
              Junior 640 Radial Arm Saw
              The Junior 640 radial arm saw offers adaptability, versatility, precision and durability to shops of all sizes. Heavy castings and the eight bearing saw carriage makes this machine very accurate and rigid. THREE PHAS
              3/8" Patterson Wire Straighten And Cut Machine
              $RFQ
              3/8" Patterson Wire Straighten And Cut Machine
              No description providedMaximum Wire Diameter.375" (3/8") Maximum Cutoff Length6' Speed Range50 - 250 FPM Lots Of Tooling
              VECTRAX MODEL GS-20V VERTICAL MILL, 10" X 54"
              $RFQ
              VECTRAX MODEL GS-20V VERTICAL MILL, 10" X 54"
              SPECIFICATIONS TABLE SIZE: 10” X 54” TRAVERSE LONGITUDINAL TRAVEL (X-AXIS): 31.75” CROSS TRAVEL (Y-AXIS): 16.2” KNEE TRAVEL: 19” RAM TRAVEL: 18” HEAD MAIN MOTOR: 3 HP SPINDLE TAPER: R-8 SPINDLE SPEEDS (L
              • Table width: 10"
              • Table length: 54"
                DMG GildeMeister CTX-510 CNC Turning Center
                $49,500
                DMG GildeMeister CTX-510 CNC Turning Center
                DMG GILDEMEISTER CTX-510 CNC TURNING CENTER Make: DMG GILDEMEISTER Model No.: CTX-510 Serial No.: 943070 Year: 2005 Condition: Very Good Comes with 15" Chuck, Steady Rest, Tailstock, Books &
                • Swing: 26.77"
                • Centers: 45.27"
                  60" x 30,000Lb McKay Uncoiler
                  $RFQ
                  60" x 30,000Lb McKay Uncoiler
                  Make: McKay Model: 69-3903-11 Mandrel Width: 69" Weight Capacity: 30,000Lb Coil ID: 20" Coil OD: 72" Powered Hold-Down Roll Hydraulic Mandrel Expansion AC Feed-Up Motor Air Cooled Brake Sel
                  • Maximum weight capacity: 30000Lb
                  • Maximum coil width: 60"
                    10 Stand x 1-1/8" x 6" LOCKFORMER Roll Former
                    $RFQ
                    10 Stand x 1-1/8" x 6" LOCKFORMER Roll Former
                    Serial #SO-1383 Stands: 10 Direction: R-L Roll Shaft Dia: 1.125" Roll Space: 6" Center, 2.5" Outsides Horizontal Centers: 6" Vertical Center: 3.5" Base to Lower Shaft: 3.25" Shaft Keyway Size: .25" Capacity: 20
                    28 Stands Tishken Duplex Roll Former
                    $RFQ
                    28 Stands Tishken Duplex Roll Former
                    Make: Tishken Year New: 1996 Serial # 21490 Number of Stands: 28 Spindle Diameter: 3" Maximum Material Thickness: .148" Roll Space: 30" - 40" Upper Spindle Adjustment: 6.5" - 8-3/8&quo
                    • # Stands: #28
                    • Roll diameter: 3"
                      CLAUSING KONDIA FV-1 2-AXIS CNC VERTICAL MILL WITH PROTOTRAK MX-2 CONTROL
                      $RFQ
                      CLAUSING KONDIA FV-1 2-AXIS CNC VERTICAL MILL WITH PROTOTRAK MX-2 CONTROL
                      SPECIFICATIONS TABLE TABLE SIZE: 9” X 48” T-SLOT: 5/8" X 3" X 2-9/16" TABLE LOAD CAPACITY: 880 LBS TRAVEL LONGITUDINAL TRAVEL: 36" SADDLE TRAVEL: 15" KNEE TRAVEL: 16.5" RAM
                      2012 CATERPILLAR D3K2 XL DOZER - E6735
                      $52,500
                      2012 CATERPILLAR D3K2 XL DOZER - E6735
                      4 CYL CAT ENGINE, HY-STAT TRANS W/ JOYSTICK STEERING, 16 IN PADS, RECENTLY INSTALLED NEW TOP & BOTTOM ROLLERS, 6 WAY BLADE (8 FT 7 IN WIDE), 3RD VALVE FOR RIPPER, HEAT, 3068 HRS SHOWING
                      2007 CATERPILLAR CB534DXW ROLLER - E6738
                      $37,000
                      2007 CATERPILLAR CB534DXW ROLLER - E6738
                      4 CYL CAT ENGINE, 2 SPD TRANS, DUAL 79 IN SMOOTH DRUM, DRUM DRIVE, VARIABLE VIBRATION, WATER SYSTEM, FRONT AND REAR SPRAY BARS, OROPS
                      2007 INGERSOLL RAND PT125R ROLLER - E6740
                      $35,500
                      2007 INGERSOLL RAND PT125R ROLLER - E6740
                      4 CYL CUMMINS ENGINE, HYDRO-STATIC TRANS, 4 FRONT WHEELS, 5 REAR WHEELS, 7.50-15 TIRES, PRESSURIZED 100 GAL WATER TANK, FRONT AND REAR SPRAY BARS, OROPS, 2388 HRS SHOWING
                      2004 INGERSOLL RAND PT-125R ROLLER - E6741
                      $32,000
                      2004 INGERSOLL RAND PT-125R ROLLER - E6741
                      4 CYL CUMMINS ENGINE, HYDRO-STATIC TRANS, 4 FRONT WHEELS, 5 REAR WHEELS, 7.50-15 TIRES, PRESSURIZED 100 GAL WATER TANK, FRONT AND REAR SPRAY BARS, OROPS
                      HAAS VF3 VERTICAL MACHINING CENTER W/PALLET CHANGER UMBRELLA STYLE TOOL CHA
                      $RFQ
                      HAAS VF3 VERTICAL MACHINING CENTER W/PALLET CHANGER UMBRELLA STYLE TOOL CHA
                      HAAS VF3 VERTICAL MACHINING CENTER W/PALLET CHANGER UMBRELLA STYLE TOOL CHANGER MFG:2006
                      RMG Uncoiler Model 1216-02
                      $RFQ
                      RMG Uncoiler Model 1216-02
                      No description providedMaximum Coil Weight4,000 lbs Maximum Wire Size (Alloy).750" Maximum Wire Size (Mild Steel)1" Maximum Rod Size (Alloy).50" Maximum Rod Size (Mild Steel).63" Mandrel Length6' Prefeeding Speed30 FPM E
                      3" x .197″ BRONX #6CR 4-1/2 BW Straightener
                      $RFQ
                      3" x .197″ BRONX #6CR 4-1/2 BW Straightener
                      6-Roll, Vertically Opposed Cross Roll Design OD Range: .394"-2" Max Wall Thickness: .197" Max OD Admitted: 3" Direction: R-L Roll Size: 4" Diameter x 8" Long Manual Roll Adjustment: 3" Approx Speed: 60–120 MPM
                      OKUMA CROWN L1060 CNC TURNING CENTER
                      $RFQ
                      OKUMA CROWN L1060 CNC TURNING CENTER
                      OKUMA CROWN L1060 CNC TURNING CENTER S/N 1531 NEW 1999 SWING OVER BED ------------------------------- 21.65" MAXIMUM OVER CARRIAGE --------------------- 15.75" MAXIMUM TURNING
                      • Swing: 21.65"
                        Kearney and Trecker or Milwaukee 40:1 Dividing Head
                        $RFQ
                        Kearney and Trecker or Milwaukee 40:1 Dividing Head
                        ****Excellent Condition***** 40:1 - K & T or Milwaukee Dividing Head Runs Smoothly For More Information Please Contact Mickey at 760-662-9299 or Email: [email protected]
                        2013 BOBCAT E80A EXCAVTOR - E6727
                        $59,500
                        2013 BOBCAT E80A EXCAVTOR - E6727
                        4 CYL YANMAR ENGINE, 18 IN RUBBER TRACKS, 24 IN BUCKET, MANUAL QUICK CONNECT, BLADE 7 FT 6 IN WIDE, PLUMBING ON STICK, PATTERN CHANGER, ENCLOSED CAB W/ A/C & HEAT. SHOWING 1743 HOURS.
                        2001 JOHN DEERE 770CH MOTOR GRADER - E6729
                        $65,500
                        2001 JOHN DEERE 770CH MOTOR GRADER - E6729
                        6 CYL JD ENGINE, 8 SPD TRANS, BLADE (14 FT), REAR RIPPER, 14.00R24 TIRES, ENCLOSED CAB W/ A/C & HEAT, 7364 HRS SHOWING
                        1600mm x 20mm UBR Sheet Leveler
                        $RFQ
                        1600mm x 20mm UBR Sheet Leveler
                        Make: UBR WMW Gotha (Germany) Maximum Material Width: 1600mm Material Thickness: 4mm - 20mm Number of Work Rolls: 11 Work Roll Diameter: 180mm Up & Down Back-Up Flights Speed: 10 meters per minute Motor:
                        • Width: 64"
                        • Thickness: 0.787"
                          MTR CNC, Turn-Mill Index Table w/Siemens 840 D CNC, 200 ton table capacity.
                          $RFQ
                          MTR CNC, Turn-Mill Index Table w/Siemens 840 D CNC, 200 ton table capacity.
                          MTR CNC, Turn-Mill Index Table Stock#: 60395-SB Year: New 2006 Specifications: Table diameter: 16 ft. Table height: 45” Table Capacity: 200 Ton Bearing: Hydrostatic Track Diameter: 116” Dual Track
                          Press Machine| Stroke 10" |
                          $RFQ
                          Press Machine| Stroke 10" |
                          Press Machine Stroke 10" Bed 10" x 59" Dimensions 75" x 75" x 106" *without hydraulic unit
                          • Stroke: 10"
                            1-1/2″ x .120″ PINES #1 Horizontal Tube Bender
                            $RFQ
                            1-1/2″ x .120″ PINES #1 Horizontal Tube Bender
                            SERIAL #11040–71236 YEAR: 1971 Round Tube: • Max OD: 1.5" (38.1 mm) • Max Wall: .109" (2.76 mm) • 1" (25.4 mm) Schedule 80 Steel • Max Yield Pressure: 40,000 PSI Square Tube: • Max OD: 1.125" (28.5 mm) • Max W
                            3/8" RMG 67 25190-90 Wire Drawer
                            $RFQ
                            3/8" RMG 67 25190-90 Wire Drawer
                            No description providedMaximum Wire Diameter (Alloy).312" Motor25 HP Maximum Speed190 FPM Capstan Diameter28" Maximum Wire Diameter (Mild Steel).375" (3/8") <span s
                            • Block diameter: 0.375"
                            • Block diameter: 0.375"
                              96" x 60,000Lb P/M Double Mandrel Uncoiler
                              $RFQ
                              96" x 60,000Lb P/M Double Mandrel Uncoiler
                              Make: P/M (Production Machinery) Serial # 145-150 Weight Capacity: 60,000Lb Material Width: 6" - 96" Dual Expandable Mandrels Dual Sliding Base Powered Hold-Down Rolls One Mandrel was Recently Painte
                              • Maximum weight capacity: 60000Lb
                              • Maximum coil width: 96"
                                10 TON POWER TEAM HYDRAULIC H-FRAME PRESS
                                $RFQ
                                10 TON POWER TEAM HYDRAULIC H-FRAME PRESS
                                10 TON POWER TEAM HYDRAULIC H-FRAME PRESS Stock # K14140 EQUIPPED WITH: H-Frame Design, Power Team R10-6SA Hydraulic Cylinder, Power Team HF-32 Hydraulic Pump, 2-Speed Hydraulic Hand
                                • Tonnage: 10T
                                • Stroke: 6"
                                  72" x 60,000Lb Aetna - Standard Uncoiler
                                  $RFQ
                                  72" x 60,000Lb Aetna - Standard Uncoiler
                                  Make: Aetna-Standard Mandrel Width: 84" Weight Capacity: 60,000Lb Coil ID: 24" Coil OD: 72" Powered Mandrel Expansion Sliding Base Motirized Brake Feed-Up Motor Drive
                                  • Maximum weight capacity: 60000Lb
                                  • Maximum coil width: 72"
                                    72" x .135" Bronx 4-Hi Precision Leveler
                                    $RFQ
                                    72" x .135" Bronx 4-Hi Precision Leveler
                                    Make: Bronx Material Width: 12" - 72" Material Thickness: .020" - .135" Work Roll Diameter: 1.75" Work Roll Width: 77" Number of Work Rolls: 19 Number of Back-Up Flights: 9 Driven
                                    • Width: 72"
                                    • Thickness: 0.135"
                                      61' Steel I-beam bridge
                                      $8,500
                                      61' Steel I-beam bridge
                                      61' span steel I-beam bridge frame with 5 cross pieces. I-beams measure 3'x12". Bolts and nuts fasteners included. Width of span stringers center to center will accommodate the wheel base of a ten yard du
                                      3/16" National Single Stroke Solid Die Cold Header
                                      $RFQ
                                      3/16" National Single Stroke Solid Die Cold Header
                                      No description providedMaximum Wire Diameter3/16" Maximum Shank Length1" Maximum Cutoff Length1-1/2" Maximum Production300 PPM Approx. Weight4,000 lbs AC Motor &am
                                      THK Ball Screws X and y axis
                                      $1,490
                                      THK Ball Screws X and y axis
                                      One is 10-feet in length, One is 5-foot length, $1,490.00 Plus Freight Re-balled with new properly sized ball bearings.
                                      CLEARANCE! 6000 Lb x 20″ EGAN #M601-20 Single Uncoiler
                                      $6,000
                                      CLEARANCE! 6000 Lb x 20″ EGAN #M601-20 Single Uncoiler
                                      Capacity: 6000 Lbs Max Width: 20″ ID Range: 16″–20″ Max OD: 60″ EQUIPPED WITH: Manual Expansion 4-Arm Brake 2 Keepers NOTE: Air motor needs work DIMENSIONS: 5′ x 3′ x 5′ APPROX WEIGHT: 4000 Lbs LOCATIO
                                      • Maximum weight capacity: 6000Lb
                                      • Maximum coil width: 20"
                                        50 Ton Used Airam Cut Off Press With Large Bed, Mdl. 3562, Note: New Replacement Cost $ 61
                                        $12,500
                                        50 Ton Used Airam Cut Off Press With Large Bed, Mdl. 3562, Note: New Replacement Cost $ 61
                                        Tonnage 50 Bed Size (L- R, F- B) 70" x 51" Distance Between Guide Pins (L- R, F- B) 61" x 32 1/2" Stroke 3" Guide Pins Diameter 2 1/2" Dimensions (L x D x H) 70" x 70" x 84" WEIGHT 10,000 Lbs.
                                        75 Ton x 5" Used Minster OBS Punch Press, Mdl. 70-4-1/2, Bolster Plate with Ball Tran
                                        $29,500
                                        75 Ton x 5" Used Minster OBS Punch Press, Mdl. 70-4-1/2, Bolster Plate with Ball Tran
                                        Tonnage 75 Tons Stroke 5" Opening Between Uprights 18-1/2" Shank Szie 2" Ram Area 18" x 24" Throat 11" Dimensions (W x D x H) Control Box 37" x 13" x 61" Dimensions (W x D x H) (Machine) 70" x 78
                                        25 Ton x 3" Used Rousselle Gap Frame OBI Punch Press (Single Crank), Mdl. #3G, Air Tr
                                        $5,950
                                        25 Ton x 3" Used Rousselle Gap Frame OBI Punch Press (Single Crank), Mdl. #3G, Air Tr
                                        Tonnage 25 Stroke 3" Shut Height 9 3/4" Bed Size ( L-R, F-B ) 20" x 14" Ram Size ( L-R, F-B ) 8 1/4" x 5 1/2" Throat 18" Strokes Per MInute 135 WEIGHT 4400 Lbs. Electric Foot Pedal Air Tri
                                        20 Ton x 2" Used Benchmaster High Speed Press, Mdl. 20-4-2424-2-14-PP 20/300-787F, Re
                                        $5,500
                                        20 Ton x 2" Used Benchmaster High Speed Press, Mdl. 20-4-2424-2-14-PP 20/300-787F, Re
                                        Stroke 2" Bed Area 24" x 24" Shut Height 14" Strokes Per MInute 20 - 300 Reeves Variable Speed Drive Hydraulic Overlaod Protection Palm Button Controls W/Emergency Stop Auto Lube System Pedestal
                                        20 Ton x 1-1/4" Used Minster High Speed Punch Press, Mdl. P2-20-24, Air Clutch & Brak
                                        $17,500
                                        20 Ton x 1-1/4" Used Minster High Speed Punch Press, Mdl. P2-20-24, Air Clutch & Brak
                                        NOTE:  This press is set up in Jog Mode right now.  Depending on which feeder you use it will need to be customized to your setup.  Press Runs well.  Rear Feeder is currently connected.  The Vam
                                        Categories:
                                        Condition:
                                        Manufacturer:
                                        Location:
                                        Price:
                                        •  to 
                                        <Prev | 181 | 182 | 183 | 184 | 185 | 186 | 187 | 188 | 189 | 190 | Next>