buy & sell, new & used machinery, machine tools & equipment

<Prev | 611 | 612 | 613 | 614 | 615 | 616 | 617 | 618 | 619 | 620 | Next>
Refine: Viewing 12341 - 12360 of 19766 matches
Sort by:
Items Per Page:  20  |  50 |  100
Beading Shaper Cutter
$50
Beading Shaper Cutter
Beading Shaper Cutter; 3-5/8" Diameter; 1/4" R; 1" H; 3/4" Bore; Model 321812
Door Edge Finger Pull Shaper Cutter
$60
Door Edge Finger Pull Shaper Cutter
Door Edge Finger Pull Shaper Cutter; 4-1/2" Diameter x 1-1/4" H x 1-1/4 - 1 Bore
Beading & Slot Cutter Set (4pc) for Table Saw
$99
Beading & Slot Cutter Set (4pc) for Table Saw
LRH Beading & Slot Cutter Set (4pc) for Table Saw; 5" Diameter; 4 Wing w/5/8" Bore; Model-Beading J106718; Model-Slot J49914
12" Saw Blade
$79
12" Saw Blade
Saw Blades (3 Each); $79.00 (Each); Various Tooth Count; 12"; 30mm Bore; Newly Sharpened
Miter Gauge for Delta Shaper
$149
Miter Gauge for Delta Shaper
Delta Miter Gauge for Delta 43-791 Shaper
Sonoruka 11,000 Lb. x 39" x .177 Servo Feed Line
$RFQ
Sonoruka 11,000 Lb. x 39" x .177 Servo Feed Line
Sonoruka 11,000 Lb. x 39" x .177 Servo Feed Line New 2002, Stock No: 17824 Coil Weight: 5000 Kg - 11,023 Lbs. Coil O.D.: 800-1500 mm - 31.49" - 59.05" Coil I.D.: 508-610 mm - 20" - 24.01"
3/8" Lewis 8SV Straighten And Cut
$RFQ
3/8" Lewis 8SV Straighten And Cut
No description providedWire Diameter Range.125" - .375" @100K PSI Maximum Cutoff Length16' Speed Range45-250 FPM E-Manual
RAS 20.10 Seamer
$12,750
RAS 20.10 Seamer
Year: 2001 Make: RAS Model: 20.10 Condition: Good Electrical: 230/3Phase Serial #: On Request Machine Status: Under Power Shipping Info: Rigging Fee Extra Weight: 1600 Dimension: L x W x H 80" x 4' x
Boyar Schultz 612 Surface Grinder,
$RFQ
Boyar Schultz 612 Surface Grinder,
Manufacturer Boyar Schultz, Model 612, Serial No. 16587, Chuck 6 x 12 Magnatool Manual, Table Size 6" x 12", Longitudinal Travel 19", Cross Travel 7", Work Height (7" Dia Wheel) 0" - 11-1/4&
  • Table width: 6"
  • Table length: 12"
    Rush 132A Drill Grinder
    $RFQ
    Rush 132A Drill Grinder
    Model No. 132A, Manufacturer Rush, Serial No. , Year Mfg. 1996, Drill & Tool Size Cap. .080" to .250", Max Drill Length 14", Max Dia of tools other than drills 2.500" with 1.250 Shank Dia., Max To
    • Maximum drill capacity: 0.25"
      Supertec G38P-150-NC OD Grinder
      $15,995
      Supertec G38P-150-NC OD Grinder
      Year: 2012 Make: Supertec Model: G38P-150-NC Condition: Good Electrical: 230/3Phase Serial #: On Request Machine Status: Not Under Power Shipping Info: Rigging Fee Extra Weight: 14000 Dimension: L x W x H 203&
      32" Northfield Vertical wood Cutting Bandsaw and Re Saw
      $3,450
      32" Northfield Vertical wood Cutting Bandsaw and Re Saw
      32" Throat 16" Max. Height under the guides 25-1/2" x 32" and 12-3/3" x 17- 3/4" Tables Tilting Table 3 HP 220 Volt 3 -Phase Motor Runs well Tires could use alittle attention. Rugg
      Kalamazoo Fully Automatic Non Ferrous Compound Mitering Cold Saw
      $4,250
      Kalamazoo Fully Automatic Non Ferrous Compound Mitering Cold Saw
      Machine Specs: Capacity @ 90 Solids 2-1/2" Round 4-3/4" Rectangle 6-1/4" x 4-1/4" @ 45 Rectangle 5-1/2"
      10" x 14" Marvel Fully Automatic Tilting Band Saw
      $8,950
      10" x 14" Marvel Fully Automatic Tilting Band Saw
      Machine Specs: Capacity Round 10" Rectangle 10" x 14" Blade Size 144" x 1" x .035 Blade Speeds
      18" x 20" Marvel Fully Automatic Tilt Frame Band Saw
      $9,950
      18" x 20" Marvel Fully Automatic Tilt Frame Band Saw
      Machine Specs: Capacity 18" x 20" Capacity at 45 18" x 12-1/2" Table Size 30" x 33" Blade Length 14'-6" Blade Width
      24” Grob Variable Speed Vertical Band Saw with Air Feed Table
      $2,650
      24” Grob Variable Speed Vertical Band Saw with Air Feed Table
      Machine Specs: Throat 24” Max Height 12” Table Size 24” x 28” Table Tilts 5 & 45 Degrees Blade Speeds 40 - 5000 RPM Blade Size 1/8 to 1” Wide by 179” Long Main HP 3 HP Weight 1670 LBS Equipped With: Welder
      16” Doall Vertical Band Saw,With Extra Height,
      $3,250
      16” Doall Vertical Band Saw,With Extra Height,
      Machine Specs: Throat 16” Cutting Height 12” ( Catalogue Spec) 14” Actual Table 24” x 24” Table Tilts Left/Right 45/10 Blade Size 1/16” - 1” Speeds 2 Ranges 50 - 300 FPM 860 - 5200 FPM Motor 1-1/2 HP 220/440 Volt
      Lors Spot Welder 40 KVA
      $RFQ
      Lors Spot Welder 40 KVA
      No description providedTransformer KVA40 Electrics440V/60 Cycle
      • Power: 40KVA
      • Power: 40KVA
        1/32" Nilson 700L Fourslide
        $RFQ
        1/32" Nilson 700L Fourslide
        No description providedWire Capacity1/32" Maximum Strip Width3/4" Straightener Feed Length4" Speed Range20 - 540 SPM Motor3/4 HP Stroke of Front Slide7/16" Stroke of Side Slides11/16" Stroke of Back Slide1/2" Approx. Flo
        TIN KNOCKER The Wizard HVAC Plasma Cutting System
        $RFQ
        TIN KNOCKER The Wizard HVAC Plasma Cutting System
        CALL 386-304-3720 FOR AVAILABILITY FEATURES: The Wizard plasma cutting system was developed specifically for the HVAC contractor/fabricator. It is designed to do all that a user could want and meet the user's
        Categories:
        Condition:
        Manufacturer:
        Location:
        Price:
        •  to 
        <Prev | 611 | 612 | 613 | 614 | 615 | 616 | 617 | 618 | 619 | 620 | Next>