buy & sell, new & used machinery, machine tools & equipment

<Prev | 251 | 252 | 253 | 254 | 255 | 256 | 257 | 258 | 259 | 260 | Next>
Refine: Viewing 12901 - 12950 of 19776 matches
Sort by:
Items Per Page:  20 |  50  |  100
FB SERIES CABINET OVEN, 2'W 2'L 2'H, 800 F, ELECTRIC
DOUBLE SIDE SWING DOORS WITH PRESSURE TYPE LATCHES. HEATING ELEMENTS AND THE 400 CFM CIRCULATING FAN ARE MOUNTED ABOVE THE WORK AREA IN A SEPARATE AREA. HEATED AIR IS CIRCULATED HORIZONTALLY IN THE WORK CHAMBER. AN AIRFL
  • Chamber width: 24"
  • Chamber length: 24"
    FB SERIES CABINET OVEN, 3'W 3'L 3'H, 650 F, ELECTRIC, NEW
    DOUBLE SIDE SWING DOORS WITH PRESSURE TYPE LATCHES. HEATING ELEMENTS AND THE 2400 CFM CIRCULATING FAN ARE MOUNTED ABOVE THE WORK AREA IN A SEPARATE AREA. HEATED AIR IS CIRCULATED HORIZONTALLY IN THE WORK CHAMBER. AN AIR
    • Chamber width: 36"
    • Chamber length: 36"
      FB SERIES WALK IN OVEN, 6'W 6'L 6'H, 500 F, ELECTRIC, NEW
      DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. HEAT IS SUPPLIED BY TUBULAR TYPE HEATING ELEMENTS MOUNTED ABOVE THE WORK AREA. HEATED AIR IS CIRCULATED COMBINATION
      • Chamber width: 72"
      • Chamber length: 72"
        FB SERIES WALK IN OVEN, 4'W 4'L 6'H, 500 F, GAS FIRED, NEW
        DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. HEAT IS SUPPLIED BY MAXON APX 400,000 BTU BURNER FIRING INTO A PROTECTED CHAMBER IN REAR OF OVEN. HEATED AIR IS CIRCULATED COMPOUND HORIZONTALLY FROM BOTH SIDE WALLS TO THE
        • Chamber width: 38"
        • Chamber length: 48"
          FB SERIES WALK IN OVEN, 4'W 8'L  6'H, GAS FIRED, 500 F, NEW
          DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. HEAT IS SUPPLIED BY MAXON APX 400,000 BTU BURNER FIRING INTO A PROTECTED CHAMBER IN THE REAR OF THE OVEN. HEATED AIR IS CIRCULATED HORIZONTALLY FRONT
          • Chamber width: 48"
          • Chamber length: 96"
            FB SERIES WALK IN OVEN, 6'W 6'L 6'H, 500 F, GAS FIRED, NEW
            DOUBLE DOOR OPENING WITH FM APPROVED SLAM LATCHES. HEAT IS SUPPLIED BY A MAXON 500,000 BTU/HR. BURNER FIRING INTO A TOP MOUNTED PLENUM. HEATED AIR IS CIRCULATED FROM BOTH SIDE WALLS TO THE ROOF BY 30" DIA 7000 CFM
            • Chamber width: 72"
            • Chamber length: 72"
              FB SERIES WALK IN OVEN 6'W 8'L 6'H, 500 F, GAS FIRED, NEW
              DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. HEAT IS SUPPLIED BY MAXON 500,000 BTU BURNER FIRING INTO A PROTECTED CHAMBER IN THE REAR OF THE OVEN. HEATED AIR IS CIRCULATED HORIZONTALLY FRONT TO BACK BY A 4800 CFM FA
              • Chamber width: 72"
              • Chamber length: 96"
                FB SERIES WALK IN OVEN, 8'W 8'L 8'H, 500 F, GAS, NEW
                DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. HEAT IS SUPPLIED BY MAXON OVENPAK 800,000 BTU BURNER FIRING INTO A PLENUM ON TOP OF THE OVEN. HEATED AIR IS CIRCULATED COMBINATION FROM BOTH SIDE WALLS TO THE ROOF BY A 700
                • Chamber width: 96"
                • Chamber length: 96"
                  FB SERIES, GAS FIRED WALK IN OVEN, 6'W 12'L 6'H, 500 F, NEW
                  DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. HEAT IS SUPPLIED BY MAXON 800,000 BTU BURNER FIRING INTO A PROTECTED CHAMBER IN REAR OF OVEN. HEATED AIR IS CIRCULATED HORIZONTALLY FRONT TO BACK BY A 7000 CFM FAN DRIVEN B
                  • Chamber width: 72"
                  • Chamber length: 144"
                    FB SERIES, WALK IN OVEN, 8'W 20'L 8'H, GAS FIRED, NEW
                    WATLOW PM6 SINGLE SET POINT TEMPERATURE CONTROLLER, WATLOW PM HIGH LIMIT CONTROLLER AND A DIGITAL TIMER TO SHUT OFF THE HEAT AT THE END OF TIMED CYCLE ALL MOUNTED IN A CONTROL PANEL ON THE RIGHT SIDE OF OVEN. PREWIRE
                    • Chamber width: 96"
                    • Chamber length: 240"
                      Breton CNC NC 400 dual table
                      Breton NC 400 dual table $79,999 2007 Breton NC 400 with dual tables. Machine time on hours 15363. Spindle has less than 500 hours. Steal this CNC for only $59,999. Must make room for new equipment. CNC comes compl
                      6' - 12' A&V WATERJET Cutting Tables
                      CALL 386-304-3720 FOR BEST PRICING AND AVAILABILITY! FEATURES: This machine is built with pride and expertise to give you many years of successful cutting capability. The non-thermal cutting method allows users t
                      MAKINO S33-APC 3-AXIS PRECISION CNC VERTICAL MACHINING CENTER
                      SERIAL NUMBER N/A NEW 2007 Page 1 of 3 GENERAL SPECIFICATIONS: Machine Strokes: Axes travel (X,Y,Z) (S33 std and APC) 25.59" x 19.68" x 17.72" Table top to spindle face 5.9" - 23.63" Pa
                      KOMO 3-AXIS 50/120 CNC VERTICAL MACHINING CENTER
                      General Specifications Table32" x 120" X-Axis travel 118" Y-Axis travel 36" Z-Axis travel 32" Table load Unlimited Spindle speeds 333 To 6000 RPM Taper in spindle Cat No.50 Rapid traverse
                      • X axis: 118"
                      • Y axis: 36"
                        IMATEC ITG 1/150/G Thru Feed Grinder
                        PROPOSAL Stock 00011183 Quote # 281546 We are pleased to submit for your consideration: VERTICAL PRECISION SPINDLE WET TYPE GRINDER (BLANCHARD TYPE) WITH 6" WIDE CONVEYOR BELT CONTINUOUS THUR-FEED SERIAL NU
                        WACHEON HI-ECO21HS 3-AXIS CNC TURNING CENTER LATHE
                        PROPOSAL Stock 00010965 Quote # 279428 We are pleased to submit for your consideration: HWACHEON HI-ECO21HS 3-AXIS CNC TURNING CENTER LATHE WITH LIVE TOOLING SERIAL NUMBER NA NEW 1998 GENERAL SPECIFICATIONS:
                        6" X 51" HEY #3 DOUBLE END FACING & CENTERING MACHINE
                        SERIAL NUMBER 2827-757 NEW 1977 GENERAL SPECIFICATIONS: Max. Diameter of work 6.25" Min. Diameter of work .25" Max. Workpiece length 51" Min. Length of work 3" Max. Swing over bed 21"
                        59"X 33' HANKOOK MDL KMIII X 1500 X 10,000 HEAVY DUTY ENGINE LATHE
                        General Specifications Swing over bed 59" Swing over carriage 47" Distance between centers 394" (33') Spindle bore 4.13" dia. Spindle nose A2-15 Taper Metric #120 Spindle speed: Manual 16
                        25.5" X 40" HAAS SL-40T 4.6" BORE 3-AXIS CNC TURNING CENTER
                        GENERAL SPECIFICATIONS: Over Front Apron 34.5" Over Cross Slide 25.5" Over Tailstock 25.5" Capacities: Chuck Size 15" Max. Cutting Diameter (varies with turret) 25.5" Max. Cutting Length
                        FELLOWS MODEL 10-4 GEAR SHAPER
                        General Specifications Max. external & internal pitch dia. 10" Max. face width, external 4" Max. diametral pitch, spur 4 DP Max. diametral pitch, helical 5 DP Bore through work spindle 5.875" Spi
                        FANUC ROBODRILL ALPHA T21IEE 3 AXIS VERTICAL HIGH SPEED DRILL TAP MACHINING
                        General Specifications X-Axis travel 19.7" Y-Axis travel 15.7" Z-Axis travel 13" Spindle to table 5.9" to 18.9" Table size 25.6"x15.7" Table Capacity 660 Lbs Spindle taper BT30
                        • X axis: 19.7"
                        • Y axis: 15.7"
                          FADAL MODEL VMC-6030HT 3 AXIS CNC VERTICAL MACHINING CENTER
                          SERIAL NUMBER 9708690 NEW 1997 GENERAL SPECIFICATIONS: Table Size 62.5" x 30" Max. Table Load 3,641 Lbs X-Axis Travel 60" Y-Axis Travel 30" Z-Axis Travel 30" Spindle to Nose to Table C
                          • X axis: 60"
                          • Y axis: 30"
                            13" X 13" DOALL MODEL 3300NC AUTOMATIC HORIZONTAL BANDSAW
                            General Specifications Rectangular 13"x13" Round 13" Blade size 1-1/4"W x .042G x 161" L Band speeds infinitely variable 40-360 FPM Band wheels 18" Automatic Bar Feed Stroke: Single l
                            DAVI-YSTAD 10 GA. X 10' MODEL KMD 5-AXIS CNC FOLDING MACHINE
                            General Specifications Max. work length 10'4" Sheet thickness 10 Gauge Clamping beam stroke 16" Daylight of clamping beam open (without tool) 24" Shut height with tools mounted 0 Max. clamping be
                            5' X 10' HOLZ-HER COSMEC CONQUEST 510 CNC ROUTER
                            General Specifications X-Axis travel 3190mm/125.6" Y-Axis travel 2010mm/79.1" Z-Axis travel 280mm/11.0" Table size 3100mm x 1600mm (122.0" x 63.0") Z-Axis clearance under rail 250mm/9.84&qu
                            CINCINNATI TWIN GRIP CENTERLESS GRINDER MODEL 230-10
                            General Specifications Capacity: Standard work rest 1/16" to 3" diam, Low Work rest 4" diam. Grinding Wheel Dimensions: Diameter 24" Hole 12" Width 10" Regulation Wheel Dimensions:
                            CHEVALIER 1418 VMC-40 3-AXIS VERTICAL MACHINING CENTER
                            General Specifications Table: Table Size 27.6" x 12.5" T-Slots 3"x0.55"x3.84" Max. Table load 330 Lbs Travels: X travel 17.7" Y travel 13.8" Z travel 15" Spindle: Spindle
                            • X axis: 17.7"
                            • Y axis: 13.8"
                              4' X 20' BIESSE ROVER B4.65 FT 3-AXIS CNC ROUTER MACHINING CENTER
                              4' X 20' BIESSE ROVER B4.65 FT 3-AXIS CNC ROUTER MACHINING CENTER General Specifications X Axis travel 256" (6500mm) Y Axis travel 49" (1260mm) Z Axis travel 7.2" (200mm) Max. Material thick
                              HARRISON LATHE M300
                              Harrison Engine Lathe M 300 Serial# 150316 Swing Over Bed: 13″ Swing Over Cross Slide: 8.25″ Distance Between Centers: 40″ Feeds: 0.001″ – 0.080″ Top Slide Travel: 7.5″ Spindle Bore: 1 9/16″ 12 Speed Settings
                              • Swing: 8.25"
                                Cincinnati 400 Ton Mechanical Press Brake (1973)
                                Specifications: Capacity: 400 Ton Overall Bed Area: 12’ Distance Between Housings: 8’6” Stroke: 4” Open Height: 12” (SDAU) Throat Depth: 10” Speed: 30 SPM Motorized Ram Adjustment: 5” Equipped With: Comp-U-B
                                • Tonnage: 400T
                                  Erie 1620 ton hydraulic press N10 (1990)
                                  Erie 1620 ton hydraulic press N10 (1990)
                                  • Tonnage: 1620T
                                  • Tonnage: 1620T
                                  • Stroke: 1620"
                                    200 Ton x 13' U.S. Industrial Hydraulic Press Brake (2014)
                                    STANDARD EQUIPMENT ​Ram Deflection Adjustment Mechanical Ram Depth Control Massive Torsion Bar or Parallelism Forged Heavy Duty Cylinder and Cylinder Body Three Speed Ram Rapid Approach, Bending Cycle and Rapid Ret
                                    • Tonnage: 200T
                                      120" x 84" x 16-/2" Gray Granite Surface Plate 4 -8" Ledges
                                      120" x 84" x 16-/2" Gray Granite Surface Plate 4 -8" Ledges
                                      ABB Robot IRB6400/M97 (1996 refurbished 2006)
                                      ABB Robot IRB6400/M97 (1996 refurbished 2006) SKU : 9433 Manufacturer : ABB Year : 1996 Price : Available upon request
                                      Raycon SS 60 Sinker EDM Machine (2004 or 2006)
                                      Specifications Form LC-2 ​60 Amp 12 x 14 Digital Read Out Full Pulse Width Cycle Time T20 Single Roll 3R Tooling Heads Tank Flush and Coolers All Manuals
                                      Cumberland Model 1628X Granulator NEW
                                      Machine is designed to grind plastic down to pellets as to reuse in Injection Molding Machines. SPECIFICATIONS: Throat size 16" x 28" Cutting Circle Diameter 16.5" Infeed: Side Feed Hopper Cutting Changer: main
                                      Chevalier Ram type Sinker EDM No. ED-252
                                      SPECIFICATIONS & DESCRIPTION: Precision Ram Type EDM machine - full CNC Machining Range: Travel in X axis: 11.8"" Travel in Y axis: 7.9" Travel in Z axis (Quill stroke): 5.9" Machine Head vertical travel/strok
                                      Quincy Air Filter and Refrigerated Compressed Air Dryer
                                      SPECIFICATIONS: Air Filter: MNW 150 PSI at 300 degrees F MDMT 40 degrees F at 150 PSI Year Built 2002 Air Dryer: Model HX Flow 1500 Options W Max Inlet Air Pressure 230 PSIG Max Inlet Air Temp 120degree
                                      Mosnic Chip Conveyor - purchased to go with a Mori Seiki HMC, Brand new NEVER USED
                                      Mosnic Chip Conveyor - purchased to go with a Mori Seiki HMC, Brand new NEVER USED
                                      Bentec 2-1/2" BT-300 Tube Bender Horizontal, Mandrel Type
                                      SPECIFICATIONS: Horizontal Mandrel type Right hand (clockwise bending rotation) Programmable work station capable of 25 parts Hydraulic mandrel extractor Hydraulic pressure die assist Under Power at Facility
                                      Delta Rib Metal Panel Line - Uncoiler, Leveler, Shear,Conveyor,Roll Former,
                                      SPECIFICATIONS: Profile : 13/16" x 8" High Rib Red Bud Industries Powered / Expandable Uncoiler With coil eye to control slack Also feeds the shear. Capacity : 5000 lbs. x 30" PA Industries 5- Station Leveler Con
                                      Corrugated Metal Roof and Siding Line-Stacker, Conveyor, Shear, Uncoiler
                                      SPECIFICATIONS: Profile: 1/2" x 2.67" corrugated Computer Batch Controller Allen Bradley Panel View 300 7 - Stand Roll Former with corrugated profile 33" roll space between blocks. 1 1/2" shafts Capacity 24-29 Gau
                                      Quintax QS15-510-S5.1 5 Axis CNC Router (2002)
                                      Description: • 5-Axis Machine ideal for high speed and precision routing, sizing, milling & trimming of wood & component parts, as well as machining light alloys. • (1) 5' x 10' (1,600 mm x 3,200 mm) Work surface
                                      CINCINNATI-INC CNC HYDRAULIC POWER SQUARING SHEAR 10' X 1/4" Model
                                      SPECIFICATIONS: Shearing Capacity, Mild Steel............. 10' X 1/4" Material Thickness, Minimum............... 26 GA Knife Size................................ 1 x 3 x 126 Maximum Rake, In/Ft.......................
                                      NEW NATIONAL HYDRAULIC SHEAR MODEL NH5210
                                      NEW NATIONAL HYDRAULIC SHEAR MODEL NH5210
                                      PEXTO 6 FT. x 10 GAUGE METAL SHEAR Model #10-U-6A
                                      SPECIFICATIONS: Capacities: 6' x 10 ga. mild steel 6' x 12 ga. stainless steel Length of knives: 73" Rake angle: 5/16" S.P.M. approx: 62 Floor to top of bed
                                      Cincinnati Mechanical Shear 1/4" x 10'
                                      SPECIFICATIONS: Capacity: 10' x 1/4" mild steel Length of knives: 10'4" Distance between housings: 10'3" Gap: 18" Rake angle: 1/4" Holddowns: 11
                                      Cincinnati Hydraulic Plate Shear Model 2H10 (1978)
                                      SPECIFICATIONS: Cutting Length 10’ Capacity Mild Steel 1/4” Power Operated Back Gauge 40” w/Digital Read Out Controls w/Stroke Control, Inch Mode Footswitch Oper
                                      CINCINNATI CNC MECHANICAL SHEAR MODEL 1810G
                                      SPECIFICATIONS: CAPACITY (MILD STEEL) 1/4" MAX CUTTING LENGTH 122 1/4" RAKE IN/FT 1/4" HOLD DOWNS 11" FRONT GAUGE RANGE 55" BACK GAUGE RANGE 48" SPEED 60 SPM MOTOR 7 1/2 HP APPROX WEIGHT 16,000 LB OAD 160" L X
                                      C & G PLASMA MODEL G641 with Thermal Dynamics Autocut 200 Amp Plasma (2002)
                                      C & G PLASMA MODEL G641 with Thermal Dynamics Autocut 200 Amp Plasma (2002)
                                      Price:
                                      •  to 
                                      <Prev | 251 | 252 | 253 | 254 | 255 | 256 | 257 | 258 | 259 | 260 | Next>