buy & sell, new & used machinery, machine tools & equipment

<Prev | 181 | 182 | 183 | 184 | 185 | 186 | 187 | 188 | 189 | 190 | Next>
Refine: Viewing 9351 - 9400 of 19764 matches
Sort by:
Items Per Page:  20 |  50  |  100
USED Hurco CNC VMC 40SLV SPIRIT
$RFQ
USED Hurco CNC VMC 40SLV SPIRIT
With 24 Tool Changer Z Digital Readout Overall Table Size 23.7" x 55.2" Working Surface 19.7" x 47.2" Slotted Table Table Load Capacity 1100 Lbs. Travels: X-Axis Travel 40 " Y-Axis Trave
  • X axis: 40"
  • Y axis: 20"
    USED SAMSTAR HEAVY DUTY 32 X 120 LATHE
    $RFQ
    USED SAMSTAR HEAVY DUTY 32 X 120 LATHE
    HEAVY DUTY ONE PIECE CONSTRUCTION HARDENED & GROUND BED WITH GAP 4-3/16" SPINDLE BORE ELECTRO-MAG CLUTCH & BRAKE SYSTEM HARDENED AND GROUND WAYS 6 WAY RAPID TRAVERSE 3 JAW CHUCK 4 JAW CHUCK FACE PLAT
    USED MONARCH HEAVY DUTY LATHE 49" X 84"
    $RFQ
    USED MONARCH HEAVY DUTY LATHE 49" X 84"
    32" 4 Jaw Chuck Sony Digital Readout on Carriage Travel D1-11 Camlock Spindle 30 HP 220/440 Main Motor 48 Feeds .006 - .363 Thread Dial 32" Wide Bed Dorian Quick Change Toolpost with Holders
    USED Hardinge Cobra 65 CNC LATHE, Fanuc 21i-TA, Tailstock
    $RFQ
    USED Hardinge Cobra 65 CNC LATHE, Fanuc 21i-TA, Tailstock
    USED Hardinge Cobra 65 CNC LATHE, Fanuc 21i-TA, Tailstock Swing diameter over upper way cover (max) 22.00"/558.8mm Z-Axis travel (maximum) ................. 31.00"/787.4mm 10" Jaw chuck Spindle co
    • Swing: 22"
      USED DENVER ASTRO II MONOSET TOOL GRINDER
      $RFQ
      USED DENVER ASTRO II MONOSET TOOL GRINDER
      (ASTRO II) ... Swing Over Table............................. 12" Dist. Between Tailstock & Workhead........... 15" Work Head Spindle Tapers..................... 5C Table Working Surface................
      Amada FBD-8025-E
      $34,000
      Amada FBD-8025-E
      1995 Amada FBD-8025-E good working
      • Tonnage: 88T
        USED GER / K.O. LEE CNC SURFACE GRINDER
        $RFQ
        USED GER / K.O. LEE CNC SURFACE GRINDER
        K.O. LEEMATIC 7000 CNC CONTROL 12" X 30" MAXIMUM CAPACITY WITH 10" X 24" SUBURBAN PERMANENT MAGNETIC CHUCK 12" DIAMETER GRINDING WHEEL CAPACITY VARIABLE SPEED SPINDLE WITH AC TECH MODEL SCF
        USED MATTISON 14" X 96" HORIZ SURFACE GRINDER SQUARE COLUMN
        $RFQ
        USED MATTISON 14" X 96" HORIZ SURFACE GRINDER SQUARE COLUMN
        Magnetic Chuck: (2x) 14" x 40" Wheel Diameter: 20" Wheel Width: 6" Wheel ID: 10" Spindle Power: 30 HP 1150 RPM Square Column Twin Magnetic Chucks Power Increme
        amada
        $35,000
        amada
        1993 Amada press brake call 216 214 6600
        • Tonnage: 88T
          5" SPINDLE GIDDINGS & LEWIS CNC HORIZONTAL BORING MILL
          $RFQ
          5" SPINDLE GIDDINGS & LEWIS CNC HORIZONTAL BORING MILL
          5" SPINDLE DIAMETER G & L "NUMERIPOINT" M-400 CONTROL WITH CRT ON PENDANT - MANUAL CONTROL #50 TAPER W/POWER DRAW BAR PENDANT CONTROL SPINDLE SPEEDS 6 TO 1120 RPM FEEDS- 0.0492 In -139.76 IPM H
          • Spindle diameter: 5"
          • X axis travel: 84"
            2000 Zieman 2660 Beaver Tail Equipment Trailer
            $13,900
            2000 Zieman 2660 Beaver Tail Equipment Trailer
            22 ft flat deck w/ 4 ft beaver tail spring loaded 5.5 ft ramps 6 D-rings each side LED lights Bucket rest Wheel chocks Steel/Hardwood reinforced deck Ex Utility company owned Matching Firestone tires Very clean
            MICRON MICRO-VR MODULAR CNC GRINDER
            $RFQ
            MICRON MICRO-VR MODULAR CNC GRINDER
            MICRON MICRO-VR MODULAR CNC GRINDER<br /> <br /> New 2004<br /> <br /> This Grinder is Based on the Utilization of Micro Modular CNC Grinding which is designed for Creep Feed and HEDG Grinding App
            2005 Hwacheon Hi-TECH 200CL 11 HP 3.5K RPM 10" Chuck CNC Lathe (SOLD)
            $27,900
            2005 Hwacheon Hi-TECH 200CL 11 HP 3.5K RPM 10" Chuck CNC Lathe (SOLD)
            Sold if you have a similar machine for sale then do please let us know. 2005 Hwacheon Hi-TECH 200CL 11 HP 3.5K RPM 10" Chuck CNC Lathe with Fanuc Oi-TB Control Please wait for your shipping quote and invoice bef
            2001 Gehring BRH1 Roller Bearing Finishing Honing Machine
            $7,000
            2001 Gehring BRH1 Roller Bearing Finishing Honing Machine
            2001 Gehring BRH1 Roller Bearing Finishing Honing Machine Please wait for your invoice or shipping quote before sending us money EZSystems Machine Reference Number: EZ8201 Machine Type: Bearing Race Grinder T
            • Maximum diameter: 72"
            • Stroke: 72"
              2012 CATERPILLAR D3K 2 LGP DOZER - W6704
              $60,500
              2012 CATERPILLAR D3K 2 LGP DOZER - W6704
              4 CYL CAT ENGINE, HYSTAT TRANS W/ JOYSTICK STEERING, 25 IN PADS, 6 WAY BLADE (10 FT 6 IN WIDE), REAR SCREENS, HEAT, 4776 HRS SHOWING
              1995 CATERPILLAR D8N DOZER - E6705
              $71,500
              1995 CATERPILLAR D8N DOZER - E6705
              6 CYL CAT ENGINE, 3 SPD TRANS W/ DIFF STEERING, 24 IN PADS, ANGLE BLADE (15 FT 3 IN WIDE), SWEEPS, REAR SCREENS, 3329 HRS SHOWING
              KOIKE ARONSON MASTERGRAPH MGX 2500 PLASMA CUTTING / BURNING TABLE
              $140,000
              KOIKE ARONSON MASTERGRAPH MGX 2500 PLASMA CUTTING / BURNING TABLE
              Brand: Koike Aronson Model: Mastergraph MGM 2500 Cutting Dimensions: 10' x 50' Serial: 45387 Year: 2008 Includes: Hypertherm HPR260 Hypertherm Edgepro Control Autogas Console Hypertherm Plasm
              24" X 24" AMADA H-600 SEMI-AUTOMATIC POST TYPE HORIZONTAL BAND S
              $RFQ
              24" X 24" AMADA H-600 SEMI-AUTOMATIC POST TYPE HORIZONTAL BAND S
              24" X 24" AMADA H-600 SEMI-AUTOMATIC POST TYPE HORIZONTAL BAND SAW S/N 555084 NEW 1980 CAPACITY --------- ( SQUARE ) ------------- 24" X 24"
              • Width capacity: 24"
              • Height capacity: 24"
                Trumpf L3050 5000 Watt Laser - Refurbished in 2017
                $159,500
                Trumpf L3050 5000 Watt Laser - Refurbished in 2017
                Trumpf L3050 5000 Watt Laser - Refurbished in 2017 Year: 2004 Laser Output: 5,000 Watts Number of Pallets: 2 Work Area: 5' x 10' Max. Material Thickness: 1" (Mild Steel); .79" (Stainless
                • Wattage: 5000W
                  14 Stand BRADBURY Roll Former, $69,500
                  $69,500
                  14 Stand BRADBURY Roll Former, $69,500
                  Model #415RF Serial #21086 Year: 1990 Driven Stands: 14 Spindle Dia.: 2.5" Roll Space: 42" Vertical Adjustment: 4"- 7.25" Horizontal Centers: 13.5" Center Line of Lower Spindle to Base: 6" Direction: L-R Equipp
                  • # Stands: #14
                  • Roll diameter: 2.5"
                    50 Ton, YODER P50, 4-post, cut off
                    $RFQ
                    50 Ton, YODER P50, 4-post, cut off
                    STOCK #1308 Max OD: 2.5" Max Wall: .095" Max Sheet Width: 36" Cutting Stroke: 5" Max Strokes/Min.: 50 Max Stock Speed: 150 FPM Bottom Die Rails: 58.5" x 6" Post Diameter: 3.75" Distance Between Posts: 40.5" L-R,
                    • Tonnage: 50T
                    • Stroke: 5"
                      Lubow MGW 25 Multi Head Welder
                      $RFQ
                      Lubow MGW 25 Multi Head Welder
                      No description providedNumber of Welding Heads16 Number of Transformers8 Transformer KVA90 KVA X8 Bed Openining72" Welding Head Max. Width@66" Interlock Model 108 BLD
                      1998 CHARMILLES ROBOFORM 20A CNC RAM TYPE SINKER EDM, 32 AMP
                      $RFQ
                      1998 CHARMILLES ROBOFORM 20A CNC RAM TYPE SINKER EDM, 32 AMP
                      SPECIFICATIONS WORK TANK SIZE: 25” X 17” X 19” TABLE WORKING SURFACE: 15.7”X 11.8” X-AXIS TRAVEL: 11.81” Y-AXIS TRAVEL: 9.85 HEAD VERTICAL TRAVEL: 9.85” TOOL CHANGER TYPE: RACK DIELECTRIC FLUID CAPACITY: 55 GALL
                      • Power: 32A
                      • Table width: 15.7"
                        1998 ACRA MODEL ASG-1224HS 3-AXIS AUTOMATIC SURFACE GRINDER, 12" X 24&
                        $RFQ
                        1998 ACRA MODEL ASG-1224HS 3-AXIS AUTOMATIC SURFACE GRINDER, 12" X 24&
                        SPECIFICATIONS TABLE SIZE: 12” X 24” MAXIMUM TABLE TRAVEL: 14.5” X 27.5” MAXIMUM SURFACE GROUND: 12” X 24” TABLE TO SPINDLE CENTER: 25” GRINDING WHEEL SIZE: 14" X 1.5" X 5" TABLE SPEED: 16 – 82 FPM
                        • Table width: 24"
                        • Table length: 12"
                          1999 CHARMILLES MODEL HD-8 HOLE DRILLING EDM MACHINE, 13.8" X 9.8"
                          $RFQ
                          1999 CHARMILLES MODEL HD-8 HOLE DRILLING EDM MACHINE, 13.8" X 9.8"
                          SPECIFICATIONS DRILLING CAPACITY: .0118” - .266” WORKTABLE SIZE: 23.6” X 11.8” TABLE LOAD CAPACITY: 880 LBS X-AXIS TRAVEL: 13.8” Y-AXIS TRAVEL: 9.8” Z-AXIS TRAVEL: 13.8” MAXIMUM WORKPIECE DIMENSIONS: 25.5” X 1
                          • Minimum hole diameter: 0.012"
                          • Maximum hole diameter: 0.226"
                            SJP 16 pass Corrugated Panel
                            $RFQ
                            SJP 16 pass Corrugated Panel
                            7/8" x 2.67" rib Corrugated Panel Rollform Line. 10,000lb Powered Uncoiler, Powered ID: 17" - 21" 16 pass Rollform mill tooled for Corrugated Air Press Flying Shear Operator Control Station, AMS
                            • # Stands: #16
                              SJP 16 pass Corrugated Panel
                              $RFQ
                              SJP 16 pass Corrugated Panel
                              7/8" x 2.67" rib Corrugated Panel Rollform Line. 10,000lb Powered Uncoiler, Powered ID: 17" - 21" 16 pass Rollform mill tooled for Corrugated Air Press Flying Shear Operator Control Station, AMS
                              • # Stands: #16
                                SJP 16 pass Corrugated Panel
                                $RFQ
                                SJP 16 pass Corrugated Panel
                                7/8" x 2.67" rib Corrugated Panel Rollform Line. 10,000lb Powered Uncoiler, Powered ID: 17" - 21" 16 pass Rollform mill tooled for Corrugated Air Press Flying Shear Operator Control Station, AMS
                                • # Stands: #16
                                  2011 CATERPILLAR D6T LGP DOZER - E6673
                                  $115,500
                                  2011 CATERPILLAR D6T LGP DOZER - E6673
                                  6 CYL CAT ENGINE, 3 SPD TRANS W/ DIFF STEERING, 36 IN PADS, 13FT 2IN S/TILT BLADE, 3RD VALVE, ENCLOSED CAB W/ A/C & HEAT
                                  MUD REMOVER From The Cottage´s Lake.
                                  $2,700
                                  MUD REMOVER From The Cottage´s Lake.
                                  Handy new in the factory made hydraulic device for removing mud from the cottages´s lake or equivalent. The device is the main part of the system you need. In addition you need a small size (6x10 feet) light ferry a
                                  Pratt & Whitney OK R8 Linear Bearing Radius Tool & Cutter Grinder
                                  $RFQ
                                  Pratt & Whitney OK R8 Linear Bearing Radius Tool & Cutter Grinder
                                  Pratt & Whitney OK R8 Linear Bearing Radius Tool & Cutter Grinder "Excellent Condition Very Clean" Includes Workhead and Collets. For More Information Please Call Mickey at 760-662-9299 or Emai
                                  Kearney & Trecker 5:1 Dividing Head
                                  $RFQ
                                  Kearney & Trecker 5:1 Dividing Head
                                  *****Excellent Condition***** Kearney & Trecker 5:1 Dividing Head 50 Taper For More Information Please Call Mickey at 760-662-9299 or Email: [email protected]
                                  Used Hammond DusKolector Model DK-1255
                                  $2,500
                                  Used Hammond DusKolector Model DK-1255
                                  Used Hammond DusKolector Model DK-1255. Ser# 13774. 10HP 230/460 volt 3 phase (wired 230) 25.6/12.8 amps. Cyclone style dust collector with single drum and Oneida 4 cartridge after filter with 2 drum storage. Approx
                                  Amada SP-30 | Hydraulic | 30 Tons |
                                  $RFQ
                                  Amada SP-30 | Hydraulic | 30 Tons |
                                  Hydraulic Capacity: 30 Tons Bed 40" x 15"
                                  Whitney 635-A | Hydraulic | 30 Tons |
                                  $RFQ
                                  Whitney 635-A | Hydraulic | 30 Tons |
                                  Hydraulic 30 Tons Bed: 96" x 57" 10 HP 440v / 3 Phases Dimensions: 86" x 150" x 74"
                                  HANSVEDT SM-150B EDM, 20 Amp, DIELECTRIC OIL SYSTEM
                                  $RFQ
                                  HANSVEDT SM-150B EDM, 20 Amp, DIELECTRIC OIL SYSTEM
                                  HANDSVEDT RAM TYPE EDM SPECIFICATIONS: WORK TABLE......................... 15" X 9" TANK SIZE.......................... 24" X 16" X 11.5" LONGITUDINAL TABLE TRAVEL.......... 8"
                                  • Power: 20A
                                  • Table width: 40"
                                    #20 Robertson/Hartford 20-225 Automated Flat Die Thread Roller
                                    $RFQ
                                    #20 Robertson/Hartford 20-225 Automated Flat Die Thread Roller
                                    No description providedScrew Diameter Capacity1/4" thru 1/2" Thread Length Capacityto 3" Thread Length (Maximum)1-1/2" @ Maximum Diameter Maximum Shank Length4" Production Rates135 to 225 PPM Die Pocket Depth3-1/8" Flat
                                    • Maximum workpiece diameter: 0.5"
                                    • Maximum workpiece diameter: 0.5"
                                    • Maximum thread length: 3"
                                      42" Widebelt Orbital Sander
                                      $10,000
                                      42" Widebelt Orbital Sander
                                      This Sander is in rebuilt condition! We are liquidating our business and no longer have use for it! Works great for cabinet doors!
                                      48" x .075" x 20,000Lb Braner Slitting Line
                                      $RFQ
                                      48" x .075" x 20,000Lb Braner Slitting Line
                                      Make: Braner Material Width: 12" - 50" Material Thickness: .010" - .075" Coil Weight: 20,000Lb Coil ID: 20" - 24" Coil OD: 60" Type: Pull - Thru Direction: Right to Left E
                                      • Maximum workpiece width: 50"
                                      • Maximum workpiece thickness: 0.075"
                                        Century Viper GT R-12/R-134a Air Conditioning AC Recovery/Recycle/Recharge
                                        $1,750
                                        Century Viper GT R-12/R-134a Air Conditioning AC Recovery/Recycle/Recharge
                                        Century Viper GT R-12/R-134a Air Conditioning AC Recovery/Recycle/Recharge Stock #RS-0409 Model #Viper VRGT- - Serial #651595 Viper GT R-12 & R134a Recovery/Recycle/Recharge Unit 115v Features: •
                                        HARDINGE/BRIDGEPORT #GX1000-OSP CNC VERTICAL MACHINING CENTER
                                        $RFQ
                                        HARDINGE/BRIDGEPORT #GX1000-OSP CNC VERTICAL MACHINING CENTER
                                        HARDINGE/BRIDGEPORT #GX1000-OSP CNC VERTICAL MACHINING CENTER BUILT 2011, INSTALLED 2012 S/N NVCB1B-0033 NEW 2011 TABLE SIZE -------------------------------
                                        • X axis: 40.16"
                                        • Y axis: 21"
                                          2008 Lincoln PowerWave 355M MIG TIG Stick Multi Process Welder
                                          $2,250
                                          2008 Lincoln PowerWave 355M MIG TIG Stick Multi Process Welder
                                          Streblow & Sons Stock #RS-0566 Welder Model - Lincoln Powerwave 355M (Part #K2368-1) - S/N: U1080209006 Lincoln Powerwave 355M Welder Specs: • Input Power: 200V-575V Single or Three Phase • Rated Outp
                                          • Power: 350AMP
                                            Lincoln Precision TIG 275 AC/DC TIG Stick Welder Stinger Clamp Torch
                                            $2,750
                                            Lincoln Precision TIG 275 AC/DC TIG Stick Welder Stinger Clamp Torch
                                            Lincoln Precision TIG 275 AC/DC TIG Stick Welder Stinger Clamp Torch Streblow & Sons Stock #RS-0484 Welder Model - Lincoln Square Wave TIG 275 - Stock #K2619-1 - Serial #U1080607762 Lincoln Square Wave TIG 275 W
                                            • Power: 340AMP
                                              Miller Spectrum 1251 Plasma Cutter w/ Plasma Torch and Ground Clamp
                                              $2,500
                                              Miller Spectrum 1251 Plasma Cutter w/ Plasma Torch and Ground Clamp
                                              Streblow & Sons Stock #RS-0331 Model: Miller Spectrum 1251 (Stock #907305-01-1) S/N: LK021421P Miller Spectrum 1000 Plasma Cutter Comes with ground clamp •Power Input 208/230/460/575V 3 Phase •Rat
                                              4000 WATT AMADA THETA 5-AXIS, LC3015CII, EZ CUT, MFG:2003
                                              $RFQ
                                              4000 WATT AMADA THETA 5-AXIS, LC3015CII, EZ CUT, MFG:2003
                                              4,000 WATT AMADA THETA LC 3015 II 5-AXIS LASER SYSTEM W/EZ CUT NITROGEN APPROX:34,000 HOURS - 24K TURBO BLOWER INSTALLED @ 22,575 HOURS
                                              • Wattage: 4000W
                                                PEDDINGHAUS OCEAN AVENGER PLUS 1250/1C SINGLE SPINDLE DRILL LINE MFG:2016
                                                $RFQ
                                                PEDDINGHAUS OCEAN AVENGER PLUS 1250/1C SINGLE SPINDLE DRILL LINE MFG:2016
                                                PEDDINGHAUS OCEAN AVENGER PLUS 1250/1C SINGLE SPINDLE DRILL LINE MFG:2016
                                                2006 Control Laser Prowriter L-80 Lamp-Pumped Laser Marking System
                                                $9,500
                                                2006 Control Laser Prowriter L-80 Lamp-Pumped Laser Marking System
                                                Specifications: Wavelength………………….................................................................……..1064 nm Mode of Operation…………......................................................…….CW, Q-Switched Laser Source
                                                2002 YCI Supermax TCV-51T CNC Drill/Tap Center w/ Built in Rotating Table
                                                $13,500
                                                2002 YCI Supermax TCV-51T CNC Drill/Tap Center w/ Built in Rotating Table
                                                Specifications: Control .............................................................. Fanuc 18M Table Size ................................................. 25.6” x 14.4” (2) Max. Table Load .........................
                                                2004 Fryer MB-14 CNC Bed Mill
                                                $13,900
                                                2004 Fryer MB-14 CNC Bed Mill
                                                Specifications: Control ...................................................................................Anilam 3000 Touch Table Size ..................................................................................
                                                1997 Fadal VMC4020HT CNC Vertical Machining Center
                                                $9,900
                                                1997 Fadal VMC4020HT CNC Vertical Machining Center
                                                Specifications: Table Size ............................................................... 43.5" x 20" X-Axis Travels .....................................................................40" Y-Axis Trav
                                                • X axis: 40"
                                                • Y axis: 20"
                                                  Categories:
                                                  Condition:
                                                  Manufacturer:
                                                  Location:
                                                  Price:
                                                  •  to 
                                                  <Prev | 181 | 182 | 183 | 184 | 185 | 186 | 187 | 188 | 189 | 190 | Next>