buy & sell, new & used machinery, machine tools & equipment

<Prev | 381 | 382 | 383 | 384 | 385 | 386 | 387 | 388 | 389 | 390 | Next>
Refine: Viewing 19051 - 19100 of 19764 matches
Sort by:
Items Per Page:  20 |  50  |  100
Chicago Dreis & Krump Back Gauge
$RFQ
Chicago Dreis & Krump Back Gauge
Who says a hand brake can't have sophistication? Tired of always using a tape measure to mark lines that must be lined up with the nose bar? This back gauge has a 25 inch travel with a inch/cm scale so it is a must
BOX & PAN SHEET METAL HAND
$RFQ
BOX & PAN SHEET METAL HAND
Incorporates all of the outstanding features of the standard hand brake plus removable, sectioned fingers that can bend any length of metal from 3 inches long to the full length of the machine. Boxes and pans can be up t
STANDARD SHEET METAL HAND BRAKE
$RFQ
STANDARD SHEET METAL HAND BRAKE
Chicago Dreis & Krump heavy duty machinery construction. Designed for accurate and economical bending of standard and special design forms. Ideal for bending mild steel with a 1 inch minimum flange to the rated capac
POWER LEAF BRAKES: bend up to 3/4 thick steel plate!
$RFQ
POWER LEAF BRAKES: bend up to 3/4 thick steel plate!
Standard, or Box & Pan, in regular, medium and heavy duty capacities. Expensive, but every model we sell includes power clamping and motorized top leafs for maximum productivity. Everything is solidly built to last f
HYDRAULIC METAL BENDING BOX & PAN BRAKE MACHINE
$RFQ
HYDRAULIC METAL BENDING BOX & PAN BRAKE MACHINE
With fingers for box and pan type forming to depth of 6" STANDARD EQUIPMENT on each hydraulic powered metal bending brake machine: Removable Nose Bar Bolted Bottom Bar Compact Hydraulic Power Unit Angle B
  • Maximum thickness capacity: 18Ga
  • Bending length: 120"
    HYDRAULIC POWERED METAL FOLDING MACHINES
    $RFQ
    HYDRAULIC POWERED METAL FOLDING MACHINES
    A standard metal folding machine needs no die changes. The machine bed supports the sheet metal, not the worker. This makes it less labor intensive than a press brake and therefore is great for short-run, and just-in-tim
    EDWARDS HYDRAULIC PRESS BRAKE
    $RFQ
    EDWARDS HYDRAULIC PRESS BRAKE
    • 40 Tons • Press Brake Tooling is 32 inches long, as seen in photo can bend 3/16 x 32", 1/4 x 24", 3/8 x 6" mild steel. • Made in USA • Heavy duty all steel construction • Rolling cylinder for maximum
    • Tonnage: 40T
      CHICAGO DREIS & KRUMP HYDRAULIC PRESS BRAKE
      $RFQ
      CHICAGO DREIS & KRUMP HYDRAULIC PRESS BRAKE
      2-Axis NC controls back gage and ram depth of up to 16 bends per job. Memory for 99 different jobs. NC back gauge is ball screw driven with vertical height adjustment. All steel welded construction. Tonnage indicator
      3 in 1 Combination Machines Shear - Press Brake - Bending Rolls
      $RFQ
      3 in 1 Combination Machines Shear - Press Brake - Bending Rolls
      52 inch $1295. 40 inch $995. 30 inch $695. Shear has squaring bar, adjustable hold-downs and back gauge. Capacity: .030" (22 gauge). For light duty shearing use only. Press Brake with segmented upper press bra
      • Maximum sheet capacity: 22Ga
        TINKNOCKER SPOT WELDER
        $RFQ
        TINKNOCKER SPOT WELDER
        • Foot Operated with Swivel Foot Pedal • Water cooled (prep) • Swivel Arms • Universal Reversible Double End Arms, 90 & 22 Degrees • Vertically Adjustable Lower Arms • 6 Point Heat Selector Capacity: 2 Pieces
        • Power: 15KVA
          MANUAL TURRET PUNCH PRESS
          $RFQ
          MANUAL TURRET PUNCH PRESS
          A fast, accurate and flexible method of punching in the shop, this 12 station, 12" throat, 5-ton punch is built to last. The solid cast and machined C frame and precision machined and ground turret make for smooth e
          • Tonnage: 5T
            JET pull lever Sheet Metal Corner Notcher
            $RFQ
            JET pull lever Sheet Metal Corner Notcher
            Notching Force: 4 Tons Maximum Notching size: 6" x 6 inches [150 x 150mm] Metal Notching Capacity: 16 gauge (.06") [1.6mm] Metal Piercing Capacity: 18 gauge (.045")[1.2mm] Stroke: 3/4 inch Weight: 165
            RAMS 24 gauge Drive Cleat End Notcher
            $RFQ
            RAMS 24 gauge Drive Cleat End Notcher
            • Notch Drive Cleats before and after they are formed. • Bench mount design. • Spring loaded handle. • Easy to change hardened steel blades. • Machine Dimensions: 4" x 6" • Weight: 20 Lbs. • Made in USA w
            RAMS 20 gauge CHEEK BENDER
            $RFQ
            RAMS 20 gauge CHEEK BENDER
            • Roller Guide End Plate • Effortless Bending • Quality needle bearing design • Made in USA with 2 year warranty
            TinKnocker 24" two sided CHEEK BENDER
            $RFQ
            TinKnocker 24" two sided CHEEK BENDER
            Bench mounted, this machine comes ready for service. Consistent bends are a certainty due to the two-way trunion keeping the bending apron in position at the origin of the bend. Adjusts for 1/4" to 7/8" bends
            RAMS 20 gauge CLEAT BENDER
            $RFQ
            RAMS 20 gauge CLEAT BENDER
            • 24 inch long • Quick Release built into lower handle • 3 Position handle - right / left / center • Quality needle bearing design • Made in USA with 2 year warranty
            Tin Knocker CLEAT BENDER
            $RFQ
            Tin Knocker CLEAT BENDER
            30 inch long. Quickly forms uniform drive cleat edges on rectangular duct with no required set up or adjustment. The upper handle forms the cleat and the lower handle opens the work space for easy removal of the metal. M
            RAMS 20 gauge Rotary HAND FLANGER
            $RFQ
            RAMS 20 gauge Rotary HAND FLANGER
            • Forms 1/4" flange on straight or curved pieces with adjustable roll spacing • Hardened steel rollers • Edge finder C-clamp design • Made in USA with 2 year warranty
            MANUAL RIGHT ANGLE FLANGER: 20 gauge
            $RFQ
            MANUAL RIGHT ANGLE FLANGER: 20 gauge
            This Tin Knocker hand flanger puts a 7/32" flange on HVAC elbows and other radius fittings. Bench mounted, there is no gauge to set, and requires no special tools. SPECIFICATIONS: Capacity: 20 gauge x 7/32"
            RAMS 24 gauge CRIMPER-BEADER
            $RFQ
            RAMS 24 gauge CRIMPER-BEADER
            Made in USA. The RAMS hand operated Crimper-Beader machine will provide you with single pass crimping and beading. It will also allow fade away crimping by simply adjusting the knurled wheel (no tools needed). By removin
            • Maximum sheet capacity: 24Ga
              ROTARY CLADDING MACHINE
              $RFQ
              ROTARY CLADDING MACHINE
              Capacity: 22 gauge(.030") mild steel Depth of Throat: 7" Weight: 71 pounds Imported machine. 6 Standard Roll sets Included: 1/4" turning, 1/8" turning, wiring, crimping, burring, & ogee be
              • Maximum sheet capacity: 22Ga
                PITTSBURGH LOCK HAMMER
                $RFQ
                PITTSBURGH LOCK HAMMER
                Capacity: 16 gauge(.060") mild steel Weight: 75 pounds Imported machine
                DUCTFORMER TDFC BRAKE
                $RFQ
                DUCTFORMER TDFC BRAKE
                Our Ductformer TDFC Brake is for bending the 90 degree bends on rectangular duct work. It is a very efficient machine to bend straight duct joints and fittings with TDC type and TDF type flange connectors. Designed so on
                POWER ROTARY CRIMPER BEADER MACHINE
                $RFQ
                POWER ROTARY CRIMPER BEADER MACHINE
                Made in USA. 14 gauge capacity. Beading, Crimping, flanging. Features: Main switch and air regulator. Integrated roller storage system to hold your frequently used roll sets. Control panel allows “on the fly” pressure a
                DUCTFORMER POWER ROTARY MACHINE
                $RFQ
                DUCTFORMER POWER ROTARY MACHINE
                $8280. Pneumatically Actuated $9540. Hydraulically Actuated 14 gauge (.075") capacity with 10" throat. Made in USA. DuctFormer DFRF-1410 can do most all your rotary forming. The machine comes with your ch
                RAMS POWER FLANGER
                $RFQ
                RAMS POWER FLANGER
                20 gauge capacity. Stand alone type comes mounted in a heavy duty cabinet. The Power Flanger will form a 7/32” right angle flange on either straight or curved pieces. It has an adjustable “auto guide” which can be set to
                ROTARY SLITTER by RAMS
                $RFQ
                ROTARY SLITTER by RAMS
                Heavy duty 24 inch throat slitters with accurate easy adjusting back gauge and scale. Shown without optional stand. Made in USA. Capacity: 16 Gauge (.06"). Speed: 65 FPM. 1 H.P. electric motor, 115/208-230V, Min
                ROTARY SLITTERS
                $RFQ
                ROTARY SLITTERS
                2024 Slitter $1995. 1624 Slitter $2395. Capactiy: 20 Gauge (.036") Capacity: 16 Gauge (.06") Throat: 24" Throa
                TINKNOCKER BARFOLDER
                $RFQ
                TINKNOCKER BARFOLDER
                An affordable, versatile 30 inch long barfolder. The TinKnocker No. 30 Barfolder uses one motion to clamp and fold to desired angle. Easy to adjust internal back gauge allows for quick flange width selection. This machi
                TIN KNOCKER HVAC DUCT BEADER
                $RFQ
                TIN KNOCKER HVAC DUCT BEADER
                Stop cross braking! Save time! Save man power with a one man operation. This heavy duty 16 gauge (.06") beader comes with 5 sets of bead tooling that can be located anywhere over the 60" working length. Tooling
                TINKNOCKER FOURPLEX CLEAT FORMER
                $RFQ
                TINKNOCKER FOURPLEX CLEAT FORMER
                Configured with S Lock & Drive Cleat rolls down the center and one choice of either Male & Female Button Lock or Pittsburgh Rolls with 3 in 1 rolls (Right Angle flange, Standing seam & Tee connection). This m
                DUCTFORMER 4-WAY CLEAT FORMER
                $RFQ
                DUCTFORMER 4-WAY CLEAT FORMER
                Made in USA, DuctFormer CR8-SDC makes Slip & Drive Cleats on the inboard rolls. 2 sets of optional rolls can be mounted on the outboard roll shaft extensions for 4 functions. 75 feet per minute. * Optional Rolls for
                RAMS Auxiliary Rollforming MACHINE
                $RFQ
                RAMS Auxiliary Rollforming MACHINE
                Made in USA - Price includes 2 sets of rolls included FREE. The machine for people who want very fast roller die changes. Capacity: 20 gauge Max // 26 gauge Min (depends on roll set used). Speed: 40 Feet Per Minute. F
                TINKNOCKER S & DRIVE HVAC ROLLFORMER
                $RFQ
                TINKNOCKER S & DRIVE HVAC ROLLFORMER
                A great machine to turn that scrap sheet metal into "S" and Drive Cleats. A fast payback item, especially when purchased with the Slip & and Drive Slitter Attachment that is now included. For an extra cost
                RAMS S & Drive Forming MACHINE
                $RFQ
                RAMS S & Drive Forming MACHINE
                Made in USA Capacity: 22 gauge Maximum // 28 gauge Minimum (Mild Steel) Speed: 30 FPM Weight: 500 Lbs Motor: 3 H.P., choose 115 V or 208-230 Volts, 1 phase Torrington Needle Bearings. Hardened steel components thro
                TIN KNOCKER 20 Gauge BUTTON LOCK MACHINE
                $RFQ
                TIN KNOCKER 20 Gauge BUTTON LOCK MACHINE
                9 Station Button Lock Rollformer means no hammering over of edges. The Button Lock roll former comes with "male" tooling on one side and "female" on the opposing side. A fast, effective way of snappin
                RAMS 24 gauge BUTTON LOCK MACHINE
                $RFQ
                RAMS 24 gauge BUTTON LOCK MACHINE
                Made in USA. Make ducts that snap together! 3 HP, 220Volts, single phase, 1725 RPM, electric motor uses 20 Amp breaker. This unique nine station, double sided machine, is capable of producing both the male and female
                TINKNOCKER 20 Gauge PITTSBURG TYPE LOCK FORMER
                $RFQ
                TINKNOCKER 20 Gauge PITTSBURG TYPE LOCK FORMER
                5 station 20 Gauge Pittsburgh lock rollformer is offered with choice of Drive Cleat or Acme rolls on the other outboard side. Powered by a 1 HP motor, 115 volts. Manufactured in Vietnam. Capacity: 26 gauge(.018") t
                TIN KNOCKER 24 Gauge Portable PITTSBURGH TYPE HVAC LOCKFORMER
                $RFQ
                TIN KNOCKER 24 Gauge Portable PITTSBURGH TYPE HVAC LOCKFORMER
                Portable little rollformer is a work horse for 24 gauge and lighter material. It is available with power flanging attachment and is perfect for field use. With the optional, all steel stand. Powered by a 1/2 HP motor, 11
                GMC Pittsburgh sheet metal lock former Machines
                $RFQ
                GMC Pittsburgh sheet metal lock former Machines
                Call 773-334-5000 to order this machine.Mon - Fri 8AM-5PM CST • Made in Taiwan • Available in two sizes: * 20 gauge capacity (24 gauge min), 110 volt, 1.5 HP motor $3350. * 16 gauge capacity (20 gauge min), 220 v
                Birmingham Pittsburg lockformer machines
                $RFQ
                Birmingham Pittsburg lockformer machines
                Call 773-334-5000 to order this machine. Mon - Fri 9AM-5PM CST Model L-20 Features: • All steel forming head • Hardened and ground shafts • Case hardened steel forming rolls • Machine cut gears • Needle roller be
                RAMS 24 gauge Pittsburgh Lock Former
                $RFQ
                RAMS 24 gauge Pittsburgh Lock Former
                RAMS 24 gauge Pittsburgh Lock Former: $2395. Capacity: 24 - 28 gauge. Approximate Speed: 35 feet per minute Dimensions: 32" L x 17" W x 9" H. Weight: 110 Lbs. Motor is 1/2 H.P., 115 volts. 5.4 Amps,
                UNI-TEK MODEL 300 TAP BURNER
                $1,000
                UNI-TEK MODEL 300 TAP BURNER
                UNI-TEK MODEL 300 TAP BURNER
                42" Rotab Tilting And Indexing Table
                $RFQ
                42" Rotab Tilting And Indexing Table
                Table Working Surface 42" Face Plate Table Center hole #4 Morse Number Of T-Slots 8 Size Of T-Slots 1/2" Face Plate Flatness .0004 Parallelism .0003 Axial / Radial Run Out .0003 Rotary Axis Drive Power
                • Diameter or width: 42"
                  12" X 36" Used Tannewitz Vertical Saw
                  $RFQ
                  12" X 36" Used Tannewitz Vertical Saw
                  Table Size 36"X42" Throat 36" Height Under Guard 12" Blade Speeds 10 To 2,000 Rpm's Blade Size 1/16" To 1-1/4" Blade Length 192" Main Motor 1.5 Hp 440 / 3 Blade Welder Yes B
                  • Throat capacity: 42"
                  • Height capacity: 36"
                    21" X 36" Rockford Hydraulic Planer Type Mill
                    $RFQ
                    21" X 36" Rockford Hydraulic Planer Type Mill
                    Table Size 21"X 36" Table Stroke Per Minute 9 To 150 SPM Table Travel Longitudinal 36" Horizontal Head Cross Travel 25" Vertical Head Travel 6" Main Motor 5 Hp. 220 / 440 Height Under Rail
                    • Table travel: 36"
                      10" X 49" Used Cincinnati Knee Type Milling Machine
                      $RFQ
                      10" X 49" Used Cincinnati Knee Type Milling Machine
                      Table Size 10" X 49" Spindle Taper Vertical 30 Taper Spindle Speeds Variable 75 To 1,130 Rpm's Spindle Feeds .001 TO .005 I.P.R. Spindle Quill Travel None Spindle Diameter 4" Spindle Tilt +/- 45
                      • Table width: 10"
                      • Table length: 49"
                        10" X 42" Used Cincinnati Knee Type Milling Machine
                        $RFQ
                        10" X 42" Used Cincinnati Knee Type Milling Machine
                        Table Size 10" X 42" Spindle Taper R- 8 Spindle Speeds Variable 85 To 3,800 Rpm's Spindle Feeds .001 To .005 I.P.R. Spindle Quill Travel 6" Spindle Diameter 4" Spindle Tilt +/- 45 Degrees S
                        • Table width: 10"
                        • Table length: 42"
                          22" X 44" Pratt & Whitney Jig Bore
                          $RFQ
                          22" X 44" Pratt & Whitney Jig Bore
                          Table 22" X 44" Longitudinal Table Travel 44" Cross Table Travel 22" Max. Table Load 1,500 Lbs Table Feeds .005 To .035 Spindle Quill Diameter 4-1/2" Spindle Speeds 37 To 1,800 Rpm's S
                          • Table width: 22"
                          • Table length: 44"
                            19-1/2" X 96" Used K & T Horizontal Milling Machine
                            $RFQ
                            19-1/2" X 96" Used K & T Horizontal Milling Machine
                            Table Size 19-1/2" X 96" Table Travel 50" Table Cross Travel 18" Spindle Taper 50" Knee Travel Up & Down 21" Spindle Speeds 13 To 1,300 Rpm's Spindle To Table Min / Max 6-3/4&q
                            • X axis: 50"
                            • Y axis: 18"
                              Categories:
                              Condition:
                              Manufacturer:
                              Location:
                              Price:
                              •  to 
                              <Prev | 381 | 382 | 383 | 384 | 385 | 386 | 387 | 388 | 389 | 390 | Next>