buy & sell, new & used machinery, machine tools & equipment

<Prev | 241 | 242 | 243 | 244 | 245 | 246 | 247 | 248 | 249 | 250 | Next>
Refine: Viewing 12351 - 12400 of 19776 matches
Sort by:
Items Per Page:  20 |  50  |  100
Beading Shaper Cutter
Beading Shaper Cutter; 3-5/8" Diameter; 1/4" R; 1" H; 3/4" Bore; Model 321812
Door Edge Finger Pull Shaper Cutter
Door Edge Finger Pull Shaper Cutter; 4-1/2" Diameter x 1-1/4" H x 1-1/4 - 1 Bore
Beading & Slot Cutter Set (4pc) for Table Saw
LRH Beading & Slot Cutter Set (4pc) for Table Saw; 5" Diameter; 4 Wing w/5/8" Bore; Model-Beading J106718; Model-Slot J49914
12" Saw Blade
Saw Blades (3 Each); $79.00 (Each); Various Tooth Count; 12"; 30mm Bore; Newly Sharpened
Miter Gauge for Delta Shaper
Delta Miter Gauge for Delta 43-791 Shaper
Sonoruka 11,000 Lb. x 39" x .177 Servo Feed Line
Sonoruka 11,000 Lb. x 39" x .177 Servo Feed Line New 2002, Stock No: 17824 Coil Weight: 5000 Kg - 11,023 Lbs. Coil O.D.: 800-1500 mm - 31.49" - 59.05" Coil I.D.: 508-610 mm - 20" - 24.01"
3/8"  Lewis 8SV Straighten And Cut
No description providedWire Diameter Range.125" - .375" @100K PSI Maximum Cutoff Length16' Speed Range45-250 FPM E-Manual
RAS 20.10 Seamer
Year: 2001 Make: RAS Model: 20.10 Condition: Good Electrical: 230/3Phase Serial #: On Request Machine Status: Under Power Shipping Info: Rigging Fee Extra Weight: 1600 Dimension: L x W x H 80" x 4' x
Boyar Schultz 612 Surface Grinder,
Manufacturer Boyar Schultz, Model 612, Serial No. 16587, Chuck 6 x 12 Magnatool Manual, Table Size 6" x 12", Longitudinal Travel 19", Cross Travel 7", Work Height (7" Dia Wheel) 0" - 11-1/4&
  • Table width: 6"
  • Table length: 12"
    Rush 132A Drill Grinder
    Model No. 132A, Manufacturer Rush, Serial No. , Year Mfg. 1996, Drill & Tool Size Cap. .080" to .250", Max Drill Length 14", Max Dia of tools other than drills 2.500" with 1.250 Shank Dia., Max To
    • Maximum drill capacity: 0.25"
      Supertec G38P-150-NC OD Grinder
      Year: 2012 Make: Supertec Model: G38P-150-NC Condition: Good Electrical: 230/3Phase Serial #: On Request Machine Status: Not Under Power Shipping Info: Rigging Fee Extra Weight: 14000 Dimension: L x W x H 203&
      32" Northfield Vertical wood Cutting Bandsaw and Re Saw
      32" Throat 16" Max. Height under the guides 25-1/2" x 32" and 12-3/3" x 17- 3/4" Tables Tilting Table 3 HP 220 Volt 3 -Phase Motor Runs well Tires could use alittle attention. Rugg
      Kalamazoo Fully Automatic Non Ferrous Compound Mitering  Cold Saw
      Machine Specs: Capacity @ 90 Solids 2-1/2" Round 4-3/4" Rectangle 6-1/4" x 4-1/4" @ 45 Rectangle 5-1/2"
      10" x 14" Marvel Fully Automatic Tilting Band Saw
      Machine Specs: Capacity Round 10" Rectangle 10" x 14" Blade Size 144" x 1" x .035 Blade Speeds
      18" x 20" Marvel Fully Automatic Tilt Frame Band Saw
      Machine Specs: Capacity 18" x 20" Capacity at 45 18" x 12-1/2" Table Size 30" x 33" Blade Length 14'-6" Blade Width
      24” Grob Variable Speed Vertical Band Saw with Air Feed Table
      Machine Specs: Throat 24” Max Height 12” Table Size 24” x 28” Table Tilts 5 & 45 Degrees Blade Speeds 40 - 5000 RPM Blade Size 1/8 to 1” Wide by 179” Long Main HP 3 HP Weight 1670 LBS Equipped With: Welder
      16” Doall Vertical Band Saw,With Extra Height,
      Machine Specs: Throat 16” Cutting Height 12” ( Catalogue Spec) 14” Actual Table 24” x 24” Table Tilts Left/Right 45/10 Blade Size 1/16” - 1” Speeds 2 Ranges 50 - 300 FPM 860 - 5200 FPM Motor 1-1/2 HP 220/440 Volt
      Lors Spot Welder 40 KVA
      No description providedTransformer KVA40 Electrics440V/60 Cycle
      • Power: 40KVA
      • Power: 40KVA
        1/32" Nilson 700L Fourslide
        No description providedWire Capacity1/32" Maximum Strip Width3/4" Straightener Feed Length4" Speed Range20 - 540 SPM Motor3/4 HP Stroke of Front Slide7/16" Stroke of Side Slides11/16" Stroke of Back Slide1/2" Approx. Flo
        TIN KNOCKER The Wizard HVAC Plasma Cutting System
        CALL 386-304-3720 FOR AVAILABILITY FEATURES: The Wizard plasma cutting system was developed specifically for the HVAC contractor/fabricator. It is designed to do all that a user could want and meet the user's
        1200 LBS Cooper Weymouth Double End Coil Reel
        600 LBS Capacity Each Side 10” Max Width 48” Max Dia of of Coil 10” Min Id 20” Max. Id 6 Keepers Good Condition Inspect in Our Lebanon NJ Warehouse
        Deckel 3Dimensional Engraving/Pantograph Machine
        Machine Specs: Ratio Min. 1 : 1.5 Max. 1 : 10 Work Table 7-7/8” x 14-1/8” Copy Table 12-1/2” x 20-1/2” Spindle Speeds 475 - 20.000 RPM KW .37/.55 220 Volt 3Phase Weight Approx. 1000 LBS Inspect Under Power in Our
        6-1/2” x 20” Barker Horizontal Mill with Vertical Head
        Machine Specs: Table Size 6-1/2” x 20” Travels Long 10” Cross 6” Vertical 6” Spindle Speeds 30 -15300 RPM Spindle Taper #30 Spindle HP2 220 Volt 3 Phase Equipped With Rotex Vertical Head - Model Model VA 255, S
        18” x 79” Tos Horizontal Mill with Vertical Head
        Specs: Table Size 18” x 79” Travels Long 55” Cross 17” Knee 18” Spindle Speeds (20) 20 - 1400 RPM Spindle Taper NO. 50 Spindle HP 15 KW (20 HP Approx) 220/440 3 Phase Feeds 13/32 - 52 IPM Rapids 129 IPM Weight
        9” x 46” Wells Index Vertical Milling Machine
        Machine Specs: Table Size 9” x 46” Travels Long 32” Cross 12” Quill 5” Knee 16” Spindle Speeds 75 - 2850 RPM Spindle HP 2 HP 220 Volt 3 Phase Spindle Taper #30 Spindle Feeds .003, .006 and .0015 Weight 2600 LBs
        8” x 36”  Burke Millrite Vertical Milling Machine
        Machine Specs: Table Size 8” x 36” Travels Long 25” Cross 8” Quill 4” Knee 15” Spindle Speeds 185 - 2500 RPM Spindle HP 1 HP 220 Volt 3 Phase Spindle Taper R8 Weight 14500 LBs Equipped With: 1 HP Milling Head
        10” x 36” South Bend Engine lathe
        10” Swing 36” Center Distance 4-1/2’ Bed 4- 228 TPI Equipped with Bed Turret Collet Closer with Nose Piece 2 5” 3 Jaw Chucks 6” 4 Jaw Chuck Drive Plate Factory Cabinet 3 Phase Motor Please Note Missing Thread
        13" x 30" Pratt & Whitney Geared Head Tool Room Lathe
        Machine Specs: Swing 13" Swing Over Slide 7" Center Distance 30 Spindle Bore 1-3/8" Spindle Speeds (8) 18 - 528 RPM HP 2 HP 220 Volt 3 _ Phase Threads
        19” x 54” Leblond Regal “ Servo Shift” Inch/ Metric Engine Lathe
        Machine Specs: Swing over Bed 19” Swing over Cross Slide 11” Center Distance 54” Spindle Mount L - Taper Spindle Bore 3” Spindle HP 10 220/440 3 Phase wired 220 Spindle Speeds (12) 40 - 1600 RPM Threads Inch 2 -
        19” x 78” Leblond Regal “ Servo Shift” Engine Lathe
        Machine Specs: Swing over Bed 19” Swing over Cross Slide 11” Center Distance 78” Spindle Mount L - Taper Spindle Bore 1-3/4” Spindle HP 7.5 220/440 3 Phase wired 220 Spindle Speeds (12) 25 - 1000 RPM Threads Inch
        19” x 78” Leblond Regal “ Servo Shift” Engine Lathe
        Machine Specs: Swing over Bed 19” Swing over Cross Slide 11” Center Distance 54” Spindle Mount L - Taper Spindle Bore 1-3/4” Spindle HP 7.5 220/440 3 Phase wired 220 Spindle Speeds (12) 40 - 1600 RPM Threads Inch
        14” OGP Optical Comparator, with Surface Illumination
        Machine Specs: Table Size 8” x 32” Travels Long. 12” Vertical Travel 9” Focus Travel (Cross) 3” Equipped With: Quadracheck II 2 Axis Read Out with Geometric Functions Power Traverse of Longitudinal and Vertical Tr
        14" J & L Optical Comparator
        6" x 25-1/2" Table 31.25 Power Lens Power UP and Down 8" x 6" Travels Light Visor Bench Centers and V - Block 115 Volt Operation
        19.69” x 27.56” x 15.75” Mitutoyo Coordinate Measuring Machine
        Machine Specs: Travels X 19.69” Y 27.56” Z 15.75” Granite Table Size 25.12‘ x 45.67” Work Piece Weight Max 180 KG Height Max 20.8” Machine Dimensions Width 42” Depth 58” Height 89” Weight 615 KG Equipped With”
        Sunnen Horizontal Hone
        Machine Specs: ID Range .060 - 6.5" Length 16" Speeds 200 - 1600 RPM Main HP 1/2 HP 115/230 Volt Single Phase Equipped With: Cast Iron Base
        Sunnen Horizontal Hone
        Machine Specs: ID Range .060 - 6.5" Length 16" Speeds 200 - 1600 RPM Main HP 1/2 HP 115/230 Volt Single Phase Equipped With: Cast Iron Base
        Sunnen Horizontal Hone
        Machine Specs: Length 16" Range .060 - 6.5" Speeds 200 - 1600 RPM Main HP 1/2 HP 115/230 Volt Single Phase Equipped With: Cast Iron Base Very Good Condition Inspect Under Power in Our Branchbur
        Duap Ag Ball Roller Tool and Cutter Grinder
        Machine Specs: Table Table Size 4" x 25-3/4" Travel 14-1/2" Swivels Right and Left Cross Travel 6" Wheel Head Swivels 90 Degr
        Rush Drill Grinder Model 258
        Drill Capacity.......................................................................3/32" to 3" Maximum Drill Length...................................................................16" Has the ability
        KO lee 2 AXis Hydraulic Feed Tool & Cutter Grinder
        Machine Specs: Swing over table: 12-1/4" Distance between tailstocks: 32" Table working surface: 5-1/4" x 37-1/4" Longitudinal table travel: 20" Table travel per rev. of handwheel: 9/16"
        6" x 12" Sharp Ball Roller Hand Feed Surface Grinder.
        Machine Specs: Grinding Pocket 6" x 14" Spindle to Table 15" Grinding Wheel 8" HP 1.5 HP 220 Volt 3 Phase Graduations Cross .001 D
        6” x 12” Boyar Schultz Hand Feed Surface Grinder
        Machine Specs: Grinding Pocket 6” x 12” Spindle Center to Table Top 15” Wheel Size 7” x 1/2” x 1-1/4” Motor 1 HP 220/440 Volt 3 Phase, Wired 220 Volt Weight 950 LBS Equipped With: 6” x 12” Walker Cermax Magnetic C
        6” x 12” Harig Hand Feed Surface Grinder
        Machine Specs: Grinding Pocket 6” x 12” Spindle Center to Table Top 15” Wheel Size 7” x 1/2” x 1-1/4” Motor 1.5 HP 220/440 Volt 3 Phase, Wired 220 Volt Weight 950 LBS Equipped With: 6” x 12” Walker Cermax Magnetic
        5" x 12" Taft Pierce Ball Roller Hand Feed Surface Grinder.
        Grinding Pocket 5" x 12" Table To Spindle Center 12" 7" x 1/2" x 1-1/4" Grinding Wheel Equipped With" 6" x 12" Walker Chuck Model no 54 Torit Dust Collector - 1/4 HP
        6" x 18" Okamoto Hand Feed Surface Grinder
        Machine Specs: Table Size 6" x 20" Travels Long 18" Cross 7" Vertical 12" Down Feed .0004" Coarse and .0001 Fine Motor
        6” x 12” KO Lee Hydraulic Feed Surface Grinder
        Grinding Pocket 6” x 12” x 16” Travels Long 14” Cross 7” Table top to Spindle Center 16” Main Motor 1HP 220 Volt 3 Phase Wheel Size 8” x 3/4” x 1-1/4” Weight 1200 LBS Approx Equipped With: 1 Axis Longitudinal Hyd
        10” x 36” Landis Universal Cylindrical Grinder
        Machine Specs: Swing 10” Centers 36” Table Swivels 16 Degrees Wheel Head Wheel Size 12” x 1” x 5” Swivel Upper 180 Degrees Lower 60 Degrees Clockwise 60 Degrees Counter Clockwise RPM 2005 and 2533 RPM Auto Infe
        16 GA x 36" Niagara Initial Pinch Power Bending  Roll
        16 Ga Capacity Mild Steel 36" Roll Length 3" Diameter Rolls Manual Adjustment Manual Drop End Forward/Reverse Runs Well Inspect Under Power in Our Branchburg NJ Warehouse
        48” x 14 Gauge Chicago Dries & Krump Finger Brake
        Description Bending Width 48” Capacity in Mild Steel 14 gauge Stainless 18 Gauge (5) 5” Fingers (2) 4” Fingers (5) 3” Fingers Inspect in our Lebanon NJ warehouse Please Note some Fingers have been altered but our
        Updated Excello Ram type EDM
        Updated Excello Ram type EDM, With 50 Amp Elox Centra Solid State Power Supply Travels Long 24” Cross 12” Ram 5” Knee 16” Equipped With: 50 Amp Elox Centa 75 Amp Solid State Power Supply Type B50 S, S/N 000161
        Price:
        •  to 
        <Prev | 241 | 242 | 243 | 244 | 245 | 246 | 247 | 248 | 249 | 250 | Next>