buy & sell, new & used machinery, machine tools & equipment

<Prev | 181 | 182 | 183 | 184 | 185 | 186 | 187 | 188 | 189 | 190 | Next>
Refine: Viewing 9051 - 9100 of 19776 matches
Sort by:
Items Per Page:  20 |  50  |  100
72" x 10,000Lb Braner Down-Layer
Make: Braner Type: Hydraulic, Straight Discharge Maximum Coil Width: 72" Maximum Weight: 10,000Lb Hydraulic Lift Hydraulic Horn Push-Botton Panel
40 TON STRIPPIT 30/40 SINGLE STATION PUNCH PRESS MFG:1978 - TOOL HOLDERS &a
40 TON STRIPPIT 30/40 SINGLE STATION PUNCH PRESS MFG:1978 - TOOL HOLDERS & TOOLING
  • Tonnage: 40T
    1/4" X 12' CINCINNATI 1812 POWER SQUARING SHEAR MFG: 1966
    1/4" X 12' CINCINNATI 1812 POWER SQUARING SHEAR MFG: 1966
    • Maximum thickness: 0.25"
      3500 WATT BLM ADIGE LT8 3D 8.5-6.5 TILT HEAD TUBE LASER MFG:2014
      3500 WATT BLM ADIGE LT8 3D 8.5-6.5 TILT HEAD TUBE LASER MFG:2014
      • Wattage: 3500W
        175 TON WYSONG HYDRAULIC PRESS BRAKE,  MODEL MTH175-144
        175 TON WYSONG HYDRAULIC PRESS BRAKE MODEL MTH175-144 S/N MT2-238 NEW 2000 CAPACITY ------------------------------------------ 175 TONS OVERALL LENGTH OF BED AND RAM -------------
        • Tonnage: 175T
          Vulcanaire Grinding Spindle with Air Controls
          Vulcanaire Grinding Spindle with Air Controls Specifications: Condition: Good Machine can be demonstrated under power Price: F.O.B. Roch ” as-inspected" $ 1,000.00 Terms: Payment prior t
          Rowe Model C8-50 Straightener SN:22066
          Rowe Model C8-50 Straightener SN:22066 General Specifications: 440 Volt, 3 Ph 160 FPM 15 HP 50” x 5“ Diameter Rolls Condition: Good PRICE: F.O.B. Rochester “as-inspected” $15,000.00 Terms
          RIS Ingold AG, Type 68-1 Double Head Chamfering Machine
          RIS Ingold AG, Type 68-1 Double Head Chamfering Machine SN: 69-28 74/Rev90 SPECIFICATIONS & EQUIPMENT: Double Head: up to 150” Diameter: up to 2” Magazine feed Volt: 460 Amp/PH: 25/3 CONDITION: Goo
          PAC Strapping PSM 1412-IC3A Semi-Automatic Plastic Strapping Machine, Model
          PAC Strapping PSM 1412-IC3A Semi-Automatic Plastic Strapping Machine, Model TP-202 SN: 30159441, Date 2003 Specifications: Type: Table Top Dimensions: 35” L x 23” D X30” H Tension Range: 10 to 100lbs Spee
          Induction Heater
          Induction Heater Specifications: Ameritherm Inductor Heater Part No. 301-0214,A SN: 102293 C1-0.66 C2-0.66 Configuration Parallel Water Input PSI: 40-80 GPM: 0.75 Amerithern Controller: Model: Hot Shot
          Dee Blast, Model 19 Abrasive Blast Cleaning and Finishing System SN: 01319
          Dee Blast, Model 19 Abrasive Blast Cleaning and Finishing System SN: 01319 Specifications: 14” front to back x 18” left to right x 16” deep Equipped With: Gun Work light Pneumatic controls Dust collector
          American Steel Line, Model 60, Single Reel SN: 9/72
          American Steel Line, Model 60, Single Reel SN: 9/72 General Specifications: Keepers 3 Max Coil Dia. 60" Max Coil Width 18” Max Spindle Capacity 2500 Type Non-Motorized Capacity 2500 Condition
          10” x 50” Southwestern Industries Trak DPM CNC 3 Axis Vertical Mill
          10” x 50” Southwestern Industries Trak DPM CNC 3 Axis Vertical Mill SN: 014B 11364 Specifications: Vertical (Bridgeport Type) Variable Speeds 70-4200 Auto Lub System Power Table Feed 440 Volts, 3 PH, 4.25 A
          Sharp CNC Vertical Milling Machine w/Proto Trak 3-Axes Control, MX3 SN: 831
          Sharp CNC Vertical Milling Machine w/Proto Trak 3-Axes Control, MX3 SN: 83120514 Specifications: 3 axis CNC control Table: 51 x 10 Chrome Ways 120 volt Convenience Outlet R-8 Spindle Auto Lub System 220/440 V
          Sharp CNC Vertical Milling Machine w/Proto Trak 3-Axes Control, MX3 SN: 831
          Sharp CNC Vertical Milling Machine w/Proto Trak 3-Axes Control, MX3 SN: 83120514 Specifications: 3 axis CNC control Table: 51 x 10 Chrome Ways 120 volt Convenience Outlet R-8 Spindle Auto Lub System 220/440 V
          Sharp CNC Vertical Milling Machine w/Proto Trak 3-Axes Control, MX3 SN: 231
          Sharp CNC Vertical Milling Machine w/Proto Trak 3-Axes Control, MX3 SN: 23100450 3 Axis CNC Control Table: 51 x 10 Chrome Ways 120 Volt Convenience Outlet R-8 Spindle Auto Lub System 220/440 Volt, 3 Horse
          Sharp CNC Vertical Milling Machine w/Proto Trak 3-Axes Control, MX3 SN: 830
          Sharp CNC Vertical Milling Machine w/Proto Trak 3-Axes Control, MX3 SN: 83080405 Specifications: 3 axis CNC control Table: 51 x 10 Chrome Ways 120 volt Convenience Outlet R-8 Spindle Auto Lub System 220/440 V
          Millport Vertical Knee Mill, Model: 3KVH#C, 1985  SN: 5512
          Millport Vertical Knee Mill, Model: 3KVH#C, 1985 SN: 5512 SPECIFICATIONS & EQUIPMENT: Table Size: 50 X 10 Work Vice-Kurt Style Working Lamp Varied Speeds Quick change tool holder Automatic Lub System 220/
          Bridgeport 9” X 36” Vertical Milling Machine S/N: 74864
          Bridgeport 9” X 36” Vertical Milling Machine S/N: 74864 Specifications: Table 9” x 36” Head J Spindle Speed 80 – 2720 Volt 220, 3 Ph, 1.5 Hp Chrome ways Equipped With: Kurt Vise Servo Power
          Bridgeport, 9x42 Vertical Milling Machine, SN: 232868 With Proto Trak Plus,
          Bridgeport, 9x42 Vertical Milling Machine, SN: 232868 With Proto Trak Plus, 2-Axis CNC Control Specifications: Table: 9” x 42” Variable Speed Kurt Style Vise Spindle: R-8 1 Shot Lub 220/440, 3ph Equip
          Romi Tormax 16-8 Engine Lathe, SN: 002-076508-193
          Romi Tormax 16-8 Engine Lathe, SN: 002-076508-193 General Specifications: 17” X 60” Capacity 8” 3 Jaw Chuck 12” 4 jaw Chuck Micro Stop Disc Cam Lock Metric and American Threading 20 Spindles Speeds (40
          Jet Lathe 12 x 40 Sn: 6633
          Jet Lathe 12 x 40 Sn: 6633 Specifications: Has removeable gap Aloris type tool post w/8 holders 8 Speed [235-1800] English and metric threading Splash guard Follow rest Steady rest Live and dead center 4 p
          Hardinge Model: HLV H   SN: HLV-H-1003
          Hardinge Model: HLV H SN: HLV-H-1003 General Specifications: 2-Axis Compound Cross Slide 5 Speed Quick Change Collets Variable Speed Coolant Speed Collet Closer Micros Stops Volts 440, 3 Phase, 1 Hp Cycl
          Hardinge TFB-H Lathe SN: HLV-H-1968
          Hardinge TFB-H Lathe SN: HLV-H-1968 Specifications: Volt: 440 or 220 3-phase HP: 1.5 Equipped With Acu -Rite II, 2 axis DRO Coolant pneumatic brake Work Lamp Collets and collet holder Conditi
          Hardinge Model: HLV,   SN: HLV-H-177
          Hardinge Model: HLV, SN: HLV-H-177 General Specifications: Volts 208, 3 Phase, 1 Hp Cycle 60 With: Collets Hardinge 5” 3-jaw chuck with wrench Condition: Good. PRICE: F.O.B. Rochester “as-i
          Hardinge Model: DSM 59   SN: DSM59-4966-3
          Hardinge Model: DSM 59 SN: DSM59-4966-3 General Specifications: 2-Axis Compound Cross Slide quick change collet closer Set of collets 5” 3-jaw chuck Variable speed Coolant 1 Hp, 220 3-phase With: 5”
          Boyar-Schultz Challenger 2A, 618 Hydraulic Surface Grinder S/N: C-3177
          Boyar-Schultz Challenger 2A, 618 Hydraulic Surface Grinder S/N: C-3177 General Specifications: Walker Ceramax Chuck 6” x 18” 220/440 Voltage, 3 Phase Equipped With: Lamp Condition: Good PR
          United Speedy Pull Tester
          5k LBF Range
          Brown & Sharpe 1030 Micromaster Surface Grinder SN: 523-1030-359
          Brown & Sharpe 1030 Micromaster Surface Grinder SN: 523-1030-359 Specifications: 10” x 30” Electromagnetic Chuck with controller X and Y auto feed Coolant tank and pump 460 Voltage, 3 Ph, 60 Cycle Condit
          Boyar-Schultz 6” X 12" Six-Twelve" Deluxe Surface Grinder SN: 343
          Boyar-Schultz 6” X 12" Six-Twelve" Deluxe Surface Grinder SN: 3433H Specifications: Walker Cermax Perm Mag. Chuck 220 Volt, 3 ph Equipped With: Dust Collector Base Condition: Good M
          Blohm Simplex  Model Simplex 7 Surface Grinder S/N 0451
          Blohm Simplex Model Simplex 7 Surface Grinder S/N 0451 Specifications: 12” x 27.5” capacity Equipped With: 12” x 27.5” Electromagnetic chuck 220 volts DC Condition: Spindle frozen. All else works
          Sturtevant Sample Grinder, Model: 0 S/N: 1158
          Sturtevant Sample Grinder, Model: 0 S/N: 1158 Specifications: Feed Opening: ¼” Production Size: 20-100 Mesh Capacity lbs. HR: 50-200 Weight (lbs.): 150 Length, Width, Height: 29” x 28” x 13”
          7” Milwaukee Double End Pedestal Grinder  Cat. Number: 4991 S/N: W8-88
          7” Milwaukee Double End Pedestal Grinder Cat. Number: 4991 S/N: W8-88 Specifications: ½ Hr 3450 RPM Equipped With: Working Lamps Condition: Good Machine can be demonstrated under power Pri
          Dumore 3 HP  Tool post Grinder Model 8317 Cat.# 25-024
          Dumore 3 HP Tool post Grinder Model 8317 Cat.# 25-024 General Specifications: 1750 spindle speed 3 HP motor 440 three phase electrics Takes a 2” wide x 12” diameter wheel Comes with 10 various wheels most the f
          Cincinnati Chromienne  Diamond Pedestal Grinder, Type AS SN: 535
          Cincinnati Chromienne Diamond Pedestal Grinder, Type AS SN: 535 Specifications: 7” diamond wheels Cap. 40 x 40 220 Volt, 3 ph. Equipped With: Coolant pump Tool holding fixture Lamp Condition: Good
          8” Double End Pedestal Grinder
          8” Double End Pedestal Grinder Specifications: 3600 RPM 220V, 3Ph, ¾ Hp Equipped With: Condition: Good Machine can be demonstrated under power Price: F.O.B. Roch ” as-inspected"
          Blanchard #11-16, 16" Vertical Rotary Surface Grinder S/N: 8996
          Blanchard #11-16, 16" Vertical Rotary Surface Grinder S/N: 8996 General Specifications: Neutrofier II Electro Magnetic Chuck Controller Wet Base Condition Good Price: F.O.B. Rocheste
          LeRoi 25 SST  Air Screw Compressor
          LeRoi 25 SST Air Screw Compressor SPECIFICATIONS & FEATURES: Motor 25 Hp. Hours 38,259 230/460 Volt; 3 Ph, EQUIPPED WITH: CONDITION: Unit can be demonstrated under power. PRICE: F.O.B.Rochester “
          Georgii Kobold Tool Grinder Model KOD526S12
          No description providedMotor55 KW 400V Frame Size71 RPM2800 Newton Meter1.88 Approx. Weight5.7 KG
          Ingersoll Rand Air Compressor Model 234OL5-V
          No description providedElectrics5 HP / 3 Phase/ 230V CFM14 Maximum PSI175 Tank Capacity60 Gallon Pump DriveBelt Drive Pump MaterialCast Iron TypeTwo Stage Weight400 lbs. approx.
          Moroni Rivet Assembly Machine Model RP-100
          No description providedMandrel Diameter1.4mm - 3.5mm Mandrel Length40mm - 80mm Rivet Body Diameter2.5mm - 50mm Rivet Body Length5mm - 50mm Production Rate150 - 280 PPM
          2003 Chevrolet S10 Masco Sweepers 1600 Parking Lot Sweeper Truck
          ○ 4.3L V6 w/ automatic transmission A/C P/S P/B ○ 47,428 total original miles ○ Masco Sweepers model 1600 parking lot sweeper unit ○ Kubota 4 cyl. water cooled 57 hp. pony motor ○ 28" blower fan / 84" x
          12 Stand x 3" ASC #CAS-4-36-12 Rollformer, $59,000
          Serial #15072.000 Direction: R-L Spindle Dia: 3" Roll Space: 36" Horizontal Center: 18" Vertical Adjustment: 6"–9" Base Top to Center Lower Spindle: 7-5/8" Spindle Key Size: 1/2" EQUIPPED WITH: Entry Guide To
          2500 Lb x 16" ASL #60 Uncoiler
          Serial #2438 Capacity: 2500 Lbs Max Width: 16" ID Range: 16"–20" Max OD: 48" EQUIPPED WITH: Manual Brake Manual Expansion 3-Arm (3) Keepers DIMENSIONS: 4′x4′x5′ APPROX WEIGHT: 1000 Lbs LOCATION: Perrysburg
          Complete Liquidation: AR Commercial Roofing & Contractors
          2-Day Live & Online Auction – 3% Broker’s Participation Fabrication & Metalworking Equipment Rolling Stock ● Building Materials ● Office Assets ● Real Estate http://bidindustrialauctions.com/ Owner Reti
          1983 ATHEY 712D FEEDER
          4 CYL JD ENGINE, HYDRO-STATIC TRANS, 30 IN DISCHARGE CONVEYOR BELT, 80 IN AUGER FEEDER, WORK LIGHTS, 8.25-20 FRONT TIRES, 14.00R24 REAR TIRES, ENCLOSED CAB BUT MISSING CAB DOOR
          2008 VOLVO PT125R PNEUMATIC ROLLER
          4 CYL CUMMINS ENGINE, 4 FRONT WHEELS, 5 REAR WHEELS, 7.50-15 TIRES, OROPS
          Fanuc MODEL 3 A/C SPINDLE MOTOR  A/C SPINDLE DRIVE CNC PARTS, TYPE A06B-1003-B100#2000 TYP
          GENERAL NUMERIC FANUC A/C SPINDLE MOTOR & SERVO DRIVE MODEL:  3     IT CAME OFF A CNC MILL RETROFIT BY CINCINNATI-MILACRON SERVO DRIVE:  TYPE:  A06B-6055-H103 SER
          Cincinnati ID ATTACHMENT FORNo. 2 TCG GRINDER ATTACHMENT
          I.D. GRINDING ATTACHMENT WITH I.D. SPINDLE FOR A CINCINNATI MODEL 2 TOOL & CUTTER GRINDER FOR MORE INFORMATION: Call Andy at 973-497-7600
          6" Swing 18" Centers Sharp OD618A OD GRINDER, PLC AUTO INFEED CONTROL WITH PLUNG
             6" X 18" SHARP/MADE BY SUPERTECH UNIVERSAL CYLINDRICAL GRINDER   MODEL: OD618A/G-10P450C     S/N: 29755        NEW: 2000  &n
          Price:
          •  to 
          <Prev | 181 | 182 | 183 | 184 | 185 | 186 | 187 | 188 | 189 | 190 | Next>