buy & sell, new & used machinery, machine tools & equipment

<Prev | 251 | 252 | 253 | 254 | 255 | 256 | 257 | 258 | 259 | 260 | Next>
Refine: Viewing 5161 - 5180 of 19763 matches
Sort by:
Items Per Page:  20  |  50 |  100
80 Ton x 3" AIRAM, 4-Post Long Bed Pneumatic Cut-Off Press
$RFQ
80 Ton x 3" AIRAM, 4-Post Long Bed Pneumatic Cut-Off Press
UTUBE NUMBER: 4053 MANUFACTURER: AIRAM MODEL NUMBER: ATP 189 YEAR: 2004 (Approximately) SPECIFICATIONS: Capacity: 50 Ton Holding, 80 Ton Impact Stroke: 3" Bed Size: 106" x 33-1/2" Number of Posts
  • Tonnage: 80T
  • Stroke: 3"
    30,000 Lb. x 36" SESCO Coil Reel and Car
    $RFQ
    30,000 Lb. x 36" SESCO Coil Reel and Car
    Stock #4062 Manufacturer: SESCO (PRESS ROOM EQUIPMENT) Model #55-536 Serial #19338-2 Maximum Coil Weight: 30,000 Lbs. Maximum Coil Width: 36″ Maximum Coil I.D.: 24" Maximum Coil O.D.: 72″ Motorized Equippe
    • Maximum weight capacity: 30000Lb
    • Maximum coil width: 36"
      DAEWOO ACE-50V VMC
      $7,985
      DAEWOO ACE-50V VMC
      MITSUBISHI CONTROL, 30 ATC, 20 HP, 8000 RPM
      • X axis: 40"
      • Y axis: 20"
        WEBSTER & BENNETT Saddle Nuts, Adjusting Nuts for the leadscrew of VTL
        $RFQ
        WEBSTER & BENNETT Saddle Nuts, Adjusting Nuts for the leadscrew of VTL
        Two (2) piece Set of (NEW) Saddle Nuts, Adjusting Nuts for the leadscrew of Vertical Turret Lathes. WEBSTER & BENNETT Part No.'s 730 & 731 Shipping Dimensions: 6" x 6" x6" 8 LBS T.
        WEBSTER & BENNETT Saddle Nuts, Adjusting Nuts for the leadscrew of VTL
        $RFQ
        WEBSTER & BENNETT Saddle Nuts, Adjusting Nuts for the leadscrew of VTL
        Two (2) piece Set of (NEW) Saddle Nuts, Adjusting Nuts for the leadscrew of Vertical Turret Lathes. WEBSTER & BENNETT Part No.'s 730 & 731 Shipping Dimensions: 6" x 6" x6" 8 LBS T.
        Mori Seiki MV-40m Vertical Machining Center
        $RFQ
        Mori Seiki MV-40m Vertical Machining Center
        Mori Seiki MV-40m Vertical Machining Center S/N: 4437, Mfg: 1992, Stock No: 18330 Model: MV-40m Table: 43.3" x 17.7" Travels: X-Axis 31.5" Y-Axis 16.14" Z-Axis 20.8"
        • X axis: 28.8"
        • Y axis: 16.14"
          2007 Doosan Model TL-2000 (4 Axis) CNC Lathe Fanuc 18i-TB Control
          $29,500
          2007 Doosan Model TL-2000 (4 Axis) CNC Lathe Fanuc 18i-TB Control
          2007 Doosan Model TL-2000 (4 Axis) CNC Lathe Fanuc 18i-TB Control Specifications Maximum Swing Over Bed 21.75" Maximum Turning Diameter (Upper Turret) 14.6” Maximum Turning Diameter (Lower Turret)
          • Swing: 21.75"
          • Centers: 24.8"
            10 Cu Ft Sweco Vibro-Energy FM-10-7 Finishing Mill, 24" Max Straight P
            $RFQ
            10 Cu Ft Sweco Vibro-Energy FM-10-7 Finishing Mill, 24" Max Straight P
            10 CU FT SWECO VIBRO-ENERGY FINISHING MILL Model Vibro-Energy FM-10-7, S/N 10FM-971-9, New 1971 Stock # Q11538 EQUIPPED WITH: Sweco Motion Generator Plus 2.5 HP Motor. From the manufacturer: Time-tested techno
            CHARMILLES ROBOFIL 440 WIRE EDM
            $27,500
            CHARMILLES ROBOFIL 440 WIRE EDM
            AUTO THREADING, SUBMERGED, GLASS SCALES
            • X axis travel: 21.65"
            • Y axis travel: 13.78"
              SUTHERLAND 66 TON AUTO STAMPER PUNCH PRESS
              $35,000
              SUTHERLAND 66 TON AUTO STAMPER PUNCH PRESS
              SUTHERLAND 66 TON AUTO STAMPER PUNCH PRESS PRICE: Loaded on Truck, Our Warehouse, York, PA …$35,000.00 HMC Stock # 20060-P Machine Serial No.: 200305027 Machine Model No.: Mark-66 New Date: June 2004 Rated Capacity
              2001 - 22 Ton Strippit Global 20/2.0 CNC Turret Punch
              $RFQ
              2001 - 22 Ton Strippit Global 20/2.0 CNC Turret Punch
              Capacity 22 Tons Maximum Sheet Size w/o reposition 48" x 96" (100" w/repo) Electrical 208V, 3 Phase, 60 Hz Throat Depth 48" Equipped with: Fanuc Control 30 Stations w/[3] Auto-Index 3 Work Cl
              • Tonnage: 22T
                1998 - 22 Ton Strippit 1250H/20-2.5 CNC Turret Punch
                $RFQ
                1998 - 22 Ton Strippit 1250H/20-2.5 CNC Turret Punch
                Capacity 22 Tons Travels 39" x 50" Max Sheet Size 120" x 50" Max Hole Diameter 3.5 Weight 25,000 lbs Equipped with: Fanuc OP Control 20 Stations w/ 3 A/I 3 Work Clamps Misc. Tooling
                • Tonnage: 22T
                  Dunham Pneumatic Collet Closer Assy for D1-6 Spindle
                  $2,500
                  Dunham Pneumatic Collet Closer Assy for D1-6 Spindle
                  For sale is one Dunham Collet Closer assy originally fitted to a Trak 1630SX lathe. Unit formerly used in aircraft plant machining tubes. Collet taper is 22J, hole thru drawbar is 1.75 inches Qty 1ea 22J Emer
                  35T Stamtec G1-35 Gap Frame Press, Single Crank, 2.76" Stroke
                  $RFQ
                  35T Stamtec G1-35 Gap Frame Press, Single Crank, 2.76" Stroke
                  35 TON STAMTEC SINGLE CRANK GAP FRAME PRESS Model G1-35, S/N 9730-S70654, New 1998 Stock # Q11680 EQUIPPED WITH: Stamtec Press Control, LINK System 1100 Tonnage Monitor, Dual Palm Buttons, Inch / Single / Continuou
                  • Tonnage: 35T
                  • Stroke: 2.76"
                    38T Aida Gap Frame Press, Model NC1-350(1)E, Single Crank, 1.9" Stroke
                    $RFQ
                    38T Aida Gap Frame Press, Model NC1-350(1)E, Single Crank, 1.9" Stroke
                    38 TON AIDA SINGLE CRANK GAP FRAME PRESS Model NC1-350(1)E, S/N 10403-0510, New 2012 Stock # Q11679 EQUIPPED WITH: Aida Press Control, LINK System 1100 Tonnage Monitor, Dual Palm Button Stand, Inch / Single / Conti
                    • Tonnage: 38T
                    • Stroke: 1.9"
                      80" x 29" Midaco 80SD CNC Auto. Pallet Changer w/ (2) Aluminum Pa
                      $RFQ
                      80" x 29" Midaco 80SD CNC Auto. Pallet Changer w/ (2) Aluminum Pa
                      80" X 29" MIDACO 80SD CNC AUTOMATIC PALLET CHANGER SHUTTLE TABLE Model 80SD, New 2008 Stock # Q11673 EQUIPPED WITH: Midaco PLC Controller, (1) Shuttle, (2) 80" x 29" x 2.5" End Load Aluminu
                      • Pallet width: 29"
                      • Pallent length: 80"
                        Studer Eco 650 CNC Grinder, New 2001
                        $RFQ
                        Studer Eco 650 CNC Grinder, New 2001
                        Year 2001 Max Swing 14" Center Height 6.9" Center Distance 25.6" Max Weight 176 lbs B-Axis Manual 0/30 Deg X Axis Travel 11.25" Z Axis Travel 31.5" Power 10 HP Wheel Configuration 1 OD
                        • Swing: 14"
                        • Centers: 25.6"
                          HARDINGE CNC VERTICAL MACHINING CENTER
                          $16,500
                          HARDINGE CNC VERTICAL MACHINING CENTER
                          HARDINGE CNC VERTICAL MACHIING CENTER PRICE: Loaded on Truck, Our Warehouse, York, PA … $16,500.00 HMC Stock # 23146 Machine Serial No.: NVC-703 Machine Model No.: VMC 1000II New Date: 12-24-2003 Made in Taiwan Spi
                          FADAL VERTICAL MACHINING CENTER
                          $35,000
                          FADAL VERTICAL MACHINING CENTER
                          FADAL VERTICAL MACHINING CENTER PRICE: Loaded on Truck, Our Warehouse, York, PA ……… $35,000.00 HMC Stock # 22192-P Machine Serial No.: Unknown Machine Model No.: VMC-6535-50 New Date: 2002 SPECIFICATIONS: Table Len
                          20" x 30" HAAS TL-1 CNC / Manual Tool Room Lathe
                          $RFQ
                          20" x 30" HAAS TL-1 CNC / Manual Tool Room Lathe
                          HAAS TL-1 Specifications: Chuck Size......................................... 8" Max Max Swing.......................................... 20" Max Swing Over Cross Slide......................... 9.5"
                          • Swing: 20"
                          • Centers: 30"
                            Categories:
                            Condition:
                            Manufacturer:
                            Location:
                            Price:
                            •  to 
                            <Prev | 251 | 252 | 253 | 254 | 255 | 256 | 257 | 258 | 259 | 260 | Next>