buy & sell, new & used machinery, machine tools & equipment

<Prev | 161 | 162 | 163 | 164 | 165 | 166 | 167 | 168 | 169 | 170 | Next>
Refine: Viewing 8251 - 8300 of 19764 matches
Sort by:
Items Per Page:  20 |  50  |  100
2005 WASINO G-07 GANG TOOL CNC LATHE WITH GANTRY LOADER & FANUC 21iTB
$RFQ
2005 WASINO G-07 GANG TOOL CNC LATHE WITH GANTRY LOADER & FANUC 21iTB
SPECIFICATIONS SPINDLE BORE: 1-3/4" BAR CAPACITY: 1-1/2" SPINDLE NOSE: 100mm FLAT SPINDLE SPEED, MAXIMUM: 4,000 RPM SPINDLE MOTOR, DUTY RATED: 7.5 HP SPINDLE CENTER HEIGHT: 39-3/8" X-AXIS TRAVEL:
SHARP MODEL LMV-42 VERTICAL TURRET MILLING MACHINE, 9" X 42"
$RFQ
SHARP MODEL LMV-42 VERTICAL TURRET MILLING MACHINE, 9" X 42"
TABLE OVERALL SIZES: 9" X 42" T SLOT SIZE: 5/8" T SLOTS (3): 2 1/2" CENTERS RANGE LONGITUDINAL TRAVEL (X AXIS): 30" CROSS TRAVEL (Y AXIS): 12" KNEE TRAVEL: 16" QUILL TRAVEL (Z
  • Table width: 9"
  • Table length: 42"
    POWERMATIC MODEL 1200 4-SPINDLE VARIABLE SPEED DRILL, 20
    $RFQ
    POWERMATIC MODEL 1200 4-SPINDLE VARIABLE SPEED DRILL, 20
    SPECIFICATIONS SPINDLES (4): #3MT DRILL TO CENTER OF CIRCLE: 20” THROAT TO COLUMN: 10” QUILL DIAMETER: 2-3/4” SPINDLE TRAVEL: 6" MOTOR: 1.5 HP SPINDLE SPEEDS: 300 – 2,000 RPM GENERAL DIMENSIONS: 86
    • # Spindles: #4
      1973 BRIDGEPORT SERIES I VERTICAL MILL, 9" X 42"
      $RFQ
      1973 BRIDGEPORT SERIES I VERTICAL MILL, 9" X 42"
      SPECIFICATIONS TABLE SIZE: 9" X 42" TABLE TRAVEL: 30" SADDLE TRAVEL CROSS FEED: 12" QUILL TRAVEL DOWN FEED: 5" KNEE TRAVEL: 16" RAM TRAVEL: 12" T-SLOTS #, SIZE: 3, 5/8" X
      • Table width: 9"
      • Table length: 42"
        2005 CLAUSING COLCHESTER MASCOT 18VS GAP BED ENGINE LATHE, 18” X 60”
        $RFQ
        2005 CLAUSING COLCHESTER MASCOT 18VS GAP BED ENGINE LATHE, 18” X 60”
        SPECIFICATIONS SWING OVER BED: 18.1” SWING OVER GAP: 27.74” SWING OVER CROSS SLIDE: 10.625" DISTANCE BETWEEN CENTERS: 60" WIDTH OF BED: 15.75” HEADSTOCK SPINDLE NOSE: D1-8 CAMLOCK SPINDLE BORE: 3” SPI
        • Swing: 18"
        • Centers: 60"
          1997 CLAUSING COLCHESTER PROFESSIONAL MASTIFF VS GAP BED ENGINE LATHE, 21&q
          $RFQ
          1997 CLAUSING COLCHESTER PROFESSIONAL MASTIFF VS GAP BED ENGINE LATHE, 21&q
          SPECIFICATIONS SWING OVER BED: 21.81” SWING OVER GAP: 32.68” SWING OVER CROSS SLIDE: 14.57" DISTANCE BETWEEN CENTERS: 60" WIDTH OF BED: 15.75” HEADSTOCK SPINDLE NOSE: D1-11 CAMLOCK SPINDLE BORE: 3.54”
          • Swing: 21"
          • Centers: 60"
            1972 JONES & SHIPMAN MODEL 1300 ID/OD CYLINDRICAL GRINDER, 10" x 2
            $RFQ
            1972 JONES & SHIPMAN MODEL 1300 ID/OD CYLINDRICAL GRINDER, 10" x 2
            SPECIFICATIONS MAXIMUM SWING: 10" DISTANCE BETWEEN CENTERS: 27" TABLE SWIVEL INCLUDED ANGLE (CLOCKWISE): 18 DEGREES TABLE SWIVEL INCLUDED ANGLE (ANTICLOCKWISE): 16 DEGREES LONGITUDINAL TABLE SPEED (HY
            • Swing: 10"
            • Centers: 27"
              1973 BRIDGEPORT SERIES I VERTICAL MILL, 9" X 42"
              $RFQ
              1973 BRIDGEPORT SERIES I VERTICAL MILL, 9" X 42"
              SPECIFICATIONS TABLE SIZE: 9" X 42" TABLE TRAVEL: 30" SADDLE TRAVEL CROSS FEED: 12" QUILL TRAVEL DOWN FEED: 5" KNEE TRAVEL: 16" RAM TRAVEL: 12" T-SLOTS #, SIZE: 3, 5/8" X
              • Table width: 9"
              • Table length: 42"
                48" GRAY RINGMASTER CNC VERTICAL TURRET LATHE WITH 5-POSITION TURRET
                $RFQ
                48" GRAY RINGMASTER CNC VERTICAL TURRET LATHE WITH 5-POSITION TURRET
                48" GRAY RINGMASTER CNC VERTICAL TURRET LATHE WITH 5-POSITION TURRET<br /> <br /> New 1973&nbsp;<br /> Rebuilt 1989<br /> <br /> Motor Driven with 75 HP, 3-Phase, 60 Cycle, DC Motor and
                16.9" AMADA CTB400 CNC VERTICAL CARBIDE BAND SAW
                $RFQ
                16.9" AMADA CTB400 CNC VERTICAL CARBIDE BAND SAW
                <span style="font-size: 14px; background-color: #fefefe; font-family: Roboto, Helvetica, Arial, sans-serif; color: #666666;">16.9" AMADA CTB400 CNC VERTICAL CARBIDE BAND SAW<br /> <br /> New 2008<br
                2003 CATERPILLLAR D5G XL
                $43,000
                2003 CATERPILLLAR D5G XL
                6 CYL CAT ENGINE, HYDROSTATIC ENGINE, JOYSTICK STEERING, 20 IN PADS, 8 FT 9 IN V PAT BLADE, ENCLOSED CAB W/ A/C & HEAT
                2014 WACKER NEUSON RTSC-2 w/ REMOTE CONTROL - R261
                $14,000
                2014 WACKER NEUSON RTSC-2 w/ REMOTE CONTROL - R261
                3 CYL KOHLER ENGINE, 32 IN DUAL DRUM, DRUM DRIVE, HIGH LOW VIBRATION, OROPS, SHOWING 434 HOURS.
                4'' Rhino Thenberger Pipe Threader
                $3,200
                4'' Rhino Thenberger Pipe Threader
                Working Condition. It has all the die size threads Almost brand new.
                • Maximum diameter: 4"
                  2012 Caterpillar D4K2 LGP w/ Sweeps & Cab w/ A/C & Heat - E7035
                  $77,500
                  2012 Caterpillar D4K2 LGP w/ Sweeps & Cab w/ A/C & Heat - E7035
                  4 CYL CAT ENGINE, HYDRO-STATIC TRANS, JOYSTICK STEERING, 25 IN PADS, 10 FT 2 IN 6 WAY BLADE, SWEEPS, ENCLOSED CAB W/ A/C & HEAT.
                  26" Swing 120" Centers Acer DYNAMIC 26120L ENGINE LATHE, 15HP, 4-1/2" bore,
                  $RFQ
                  26" Swing 120" Centers Acer DYNAMIC 26120L ENGINE LATHE, 15HP, 4-1/2" bore,
                    "NEW" ACER DYNAMIC "26L" SERIES LARGE BORE ENGINE LATHE  MODEL: DYNAMIC 26120L   Features: 4-1/2" Spindle bore D1-8 Spindle Nose 15 HP speed Motor for 220V/440V /3 Phase /
                  0.75" Dia. KSI KM-20 CNC SWISS TYPE LATHE, Fanuc 18iTB
                  $RFQ
                  0.75" Dia. KSI KM-20 CNC SWISS TYPE LATHE, Fanuc 18iTB
                  KSI SM-20 7-AXIS SWISS TYPE CNC LATHE NEW: 2009   SPECIFICATIONS: MAX. TURNING DIAMETER ............ 0.787" MAX. SPEED ....................... 10,000 RPM STROKE ........................... 10.236" O
                  22" Swing 40" Centers Sharp 2240B ENGINE LATHE, 4.5 thru hole, 15 hp, , D1-11
                  $RFQ
                  22" Swing 40" Centers Sharp 2240B ENGINE LATHE, 4.5 thru hole, 15 hp, , D1-11
                  NEW SHARP MODEL: 2240B PRECISION GAP BED ENGINE LATHE   FEATURES: D1-11 Camlock 4.5” Spindle Bore Direct Selection For Inch/Metric Threads One Piece Cast Meehanite Bed Quick Change Gearbox 15 HP Mo
                  2.5" Dia. 60' Length ft LNS Ecoload-L BAR FEED
                  $4,950
                  2.5" Dia. 60' Length ft LNS Ecoload-L BAR FEED
                  LNS ECOLOAD-L MAGAZINE BARFEED NEW: 2004   SPECIFICATIONS: BAR DIAMETER ......... 1/4" -2-1/2" BAR LENGTH ........... 12" -59" PUSHER LENGTH ........ 61" APPROX. WEIGHT ....... 900 LB
                  350 Ton 144" Bed Pacific FF350-12-I PRESS BRAKE, Hurco Autobend 5C CNC Back Gauge
                  $69,500
                  350 Ton 144" Bed Pacific FF350-12-I PRESS BRAKE, Hurco Autobend 5C CNC Back Gauge
                    350 Ton x 12' Pacific Hyd. Press Brake W/Hurco 5C Back Gauge   MODEL FF350-12-I           S/N 9385          &nb
                  0.59" (Maximum Bevel Width) Used (Demo Machinery) BAILEIGH BEVELING MACHINE, Mdl. CM-
                  $11,595
                  0.59" (Maximum Bevel Width) Used (Demo Machinery) BAILEIGH BEVELING MACHINE, Mdl. CM-
                  Maximum Bevel Width 0.59" Bevel Angle 15° to 50° (Variable) Material Thickness 0.236" to 1.57" Blade Speed 2800 RPM Cutting Speed 11.4 fpm Motor 2 H.P. Dimensions (L x W x H) 2
                  Mahaffy & Harder Rollstock Packager
                  $RFQ
                  Mahaffy & Harder Rollstock Packager
                  Mahaffy & Harder Mdl. 730 Rollstock Packager, Ser. #730-122, approx. 360 mm W, 2 up configuration, 140 mm W X 125 mm pockets, 4 up sealing head, manual controls, 230 volts. Items Located in: Stockton, CA
                  Tetra Laval Tiromat Rollstock Packager
                  $RFQ
                  Tetra Laval Tiromat Rollstock Packager
                  Tetra Laval Mdl. 680 Tiromat Rollstock Packager, Ser. #686/101, approx. 550 mm between chains, 2 up die config 300 mm L X 240 mm with oval pockets, touchscreen controls, approx. 330 mm film advance. Item Located in: S
                  Dual Shaft Vacuum Paddle Blender
                  $RFQ
                  Dual Shaft Vacuum Paddle Blender
                  AMFEC Mdl. 210 Stainless Steel Continuous Vacuum Stuffer, single shaft paddles, stainless steel auger, 36" W X 48" L X 32" D, hydraulic operation, 230/460 volt motor on pump, pneumatic lid, Ser. #920346.
                  Stainless Steel Continuous Vacuum Stuffer,
                  $RFQ
                  Stainless Steel Continuous Vacuum Stuffer,
                  AMFEC Mdl. 210 Stainless Steel Continuous Vacuum Stuffer, single shaft paddles, stainless steel auger, 36" W X 48" L X 32" D, hydraulic operation, 230/460 volt motor on pump, pneumatic lid, Ser. #950157, m
                  Linking & Hanging System
                  $RFQ
                  Linking & Hanging System
                  Hitec Mdl. Hitec-M-3Z High Speed Linking & Hanging System, Ser. #253, for artificial casings, linking chain, 6" between links, looper chain. Item Located in: Stockton, CA
                  Griffith Emulsifier
                  $RFQ
                  Griffith Emulsifier
                  Griffith Mdl. FD225 Emulsifier, dual plate, 100 h.p., 230/460 volt motor, stainless steel hopper, on painted steel stand, 4' W X 4' L X 57" T, with stainless steel stairs 24" W X 4' T Item Locate
                  Stainless Steel Extructor
                  $RFQ
                  Stainless Steel Extructor
                  Rietz Mdl. RE-15-K7E328 Stainless Steel Extructor, 25 h.p., 230/460 volts motor, Ser. #RE-770240, 59" W X 51" D carriage, hydraulic power pack, 7.5 h.p., 230/460 volt motor. Item Located in: Stockton, CA
                  Weiler Grinder
                  $RFQ
                  Weiler Grinder
                  Weiler Mdl. 1668 Grinder with top mounted stainless steel hopper, stairs with platform, 50 h.p. grinder motor, 11" plate, stainless steel barrel, auger and ring, 1992-5HA gearbox, Weiler stainless steel auger puller
                  Vacuum Paddle Blender
                  $RFQ
                  Vacuum Paddle Blender
                  AMFEC Mdl. 510 Dual Shaft Vacuum Paddle Blender, approx. 8000 Lb. capacity, 6' W X 128" L X 48" D dual troughs, pneumatic lid, pneumatic dual front end discharge, hydraulic operation, 60 h.p., 460 volt moto
                  2008 CATERPILLAR D6T LGP W/ 3RD VALVE & SWEEPS - E7108
                  $78,500
                  2008 CATERPILLAR D6T LGP W/ 3RD VALVE & SWEEPS - E7108
                  6 CYL ENGINE, 3 SPEED TRANS, 36 IN PADS, STRAIGHT/ TILT BLADE, REAR SCREENS, SWEEPS, 3RD VALVE FOR RIPPER 5383 HOURS SHOWING
                  Giddings & Lewis 60” / 72” CNC VBM, 75HP, w/G&L 8000B CNC Control,
                  $RFQ
                  Giddings & Lewis 60” / 72” CNC VBM, 75HP, w/G&L 8000B CNC Control,
                  Giddings & Lewis 60” / 72” CNC VBM Stock #20164-IS Year of Mfg: 1978 / Rebuilt 1996 Serial Number: 513-0054-78/96 Specifications: Table Size: 60” Swing: 72” Table Speed Range: 3.8-333 RPM Table Motor: 75
                  • Swing: 72"
                    2011 VOLVO DT240 R W/ OROPS - E7096
                    $43,500
                    2011 VOLVO DT240 R W/ OROPS - E7096
                    CUMMINS QSB3.3 ENGINE, 3 SPEED TRANS, DUAL DRUM, 11.00 - 20 TIRES, SINGLE WATER TANK, FRONT SPRAY HEADS, OROPS, 2651 HOURS SHOWING.
                    2012 DEERE 750K LGP CAB W/ A/C & HEAT - E7089
                    $83,500
                    2012 DEERE 750K LGP CAB W/ A/C & HEAT - E7089
                    6 CYL JOHN DEERE ENGINE, 3 SPEED TRANS, JOYSTICK STEERING, 34 IN PADS, 12 FT 6 IN 6 WAY BLADE, ENCLOSED CAB W/ A/C & HEAT
                    2013 DEERE 750J LGP CAB W/ A/C & HEAT - E7088
                    $77,500
                    2013 DEERE 750J LGP CAB W/ A/C & HEAT - E7088
                    6 CYL JD ENGINE, ENCLOSED CAB W/ A/C & HEAT.
                    2015 CATERPILLAR 930M W/ QUICK CONNECT & CAB W/ A/C & HEAT - E7085
                    $119,500
                    2015 CATERPILLAR 930M W/ QUICK CONNECT & CAB W/ A/C & HEAT - E7085
                    8 FT 3 IN GP BUCKET, QUICK CONNECT, 20.5 R 25 TIRES, 3RD VALVE, ENCLOSED CAB w/ A/C & HEAT, REAR VIEW CAMERA. 2996 HOURS SHOWING
                    2014 CATERPILLAR D4K2 XL ENCLOSED CAB W/ A/C & HEAT - E7071
                    $69,500
                    2014 CATERPILLAR D4K2 XL ENCLOSED CAB W/ A/C & HEAT - E7071
                    6 CYL CAT ENGINE, HYDRO-STATIC TRANS, JOYSTICK STEERING, 14 IN PADS, 8 FT 6 WAY BLADE, ENCLOSED CAB W/ A/C & HEAT. 4891 HOURS SHOWING
                    32/44" X 120" LEHIGH HEAVY DUTY GAP BED LATHE, MODEL 32120B
                    $RFQ
                    32/44" X 120" LEHIGH HEAVY DUTY GAP BED LATHE, MODEL 32120B
                    32/44" X 120" LEHIGH HEAVY DUTY GAP BED LATHE MODEL 32120B S/N 00129 NEW 2001 SWING OVER BED ------------------------------- 33" SWING OVER CROSS SL
                    • Swing: 32"
                    • Centers: 120"
                      16" X 40" BRIDGEPORT ROMI EZ-PATH CNC/MANUAL ENGINE LATHE
                      $RFQ
                      16" X 40" BRIDGEPORT ROMI EZ-PATH CNC/MANUAL ENGINE LATHE
                      16" X 40" BRIDGEPORT ROMI EZ-PATH CNC/MANUAL ENGINE LATHE S/N 002-078821-325 NEW 1994 SWING OVER BED -------------------------------- 16.5" SWING OVER CROSS SLIDE
                      • Swing: 16.5"
                        22 TON TRUMPF TC2000R BOSCH TYPE 3, MFG:1999
                        $RFQ
                        22 TON TRUMPF TC2000R BOSCH TYPE 3, MFG:1999
                        22 TON TRUMPF TRUMATIC TC2000R TURRET PUNCH W/BOSCH TYPE 3 CONTROL MFG:1999 - APPROXIMATELY 17,000 HOURS
                        • Tonnage: 22T
                          TRUMPF TRULASER 1030, 2500 WATT, 5' X 10', MFG:2013
                          $RFQ
                          TRUMPF TRULASER 1030, 2500 WATT, 5' X 10', MFG:2013
                          2500 WATT TRUMPF TRULASER 1030 CO2 LASER MFG:2013 APPROX:21,500 TOTAL LASER ON HOURS
                          8 TON HAEGER MODEL 824 ONE TOUCH LITE INSERTION PRESS,BOWL FEEDS,PC, MFG:20
                          $RFQ
                          8 TON HAEGER MODEL 824 ONE TOUCH LITE INSERTION PRESS,BOWL FEEDS,PC, MFG:20
                          8 TON HAEGER 824 ONE TOUCH LITE HYDRAULIC INSERTION PRESS W/PC BASED TOUCH SCREEN CONTROL, BOWL FEEDS,TOOLING MFG:2012
                          • Tonnage: 8T
                            22 TON AMADA EM2510NT NT SERVO-ELECTRIC TURRET PUNCH PRESS MFG:2004
                            $RFQ
                            22 TON AMADA EM2510NT NT SERVO-ELECTRIC TURRET PUNCH PRESS MFG:2004
                            22 TON AMADA EM2510NT NT SERVO-ELECTRIC TURRET PUNCH PRESS MFG:2004
                            • Tonnage: 22T
                              RAS 79.26-2 MULTIBEND-CENTER MFG:2013
                              $RFQ
                              RAS 79.26-2 MULTIBEND-CENTER MFG:2013
                              RAS 79.26-2 MULTIBEND-CENTER MFG:2013
                              2013 DEERE 750K LGP W/ CAB W/A/C & HEAT - E7090
                              $82,500
                              2013 DEERE 750K LGP W/ CAB W/A/C & HEAT - E7090
                              6 CYL JD ENGINE, 3 SPEED TRANS, JOYSTICK STEERING, 34 IN PADS, 12 FT 4 IN SIX WAY BLADE, ENCLOSED CAB W/ A/C & HEAT
                              24" x 1/2" Torrance API Tube Mill
                              $RFQ
                              24" x 1/2" Torrance API Tube Mill
                              Make: Torrance (USA) Model: TMC - 450 Pipe Diameter: 6-5/8" - 24" Wall Thickness: .030" - .500" Material Grade: API X42, X52, X60, X70 Maximum Pipe Length: 12.8 meters Entry Coil Car Cone T
                              • Maximum diameter: 24"
                              • Maximum thickness: 0.5"
                                2011 CATERPILLAR 321DLCR W/ ENCLOSED CAB W/ A/C & HEAT - E7106
                                $86,500
                                2011 CATERPILLAR 321DLCR W/ ENCLOSED CAB W/ A/C & HEAT - E7106
                                6 CYL CAT ENGINE, 32 IN PADS, 46 IN BUCKET, ENCLOSED CAB W/ A/C & HEAT
                                2011 CATERPILLAR M318 D W/ PLUMBING ON STICK W/ CAB W/ A/C & HEAT E7104
                                $76,500
                                2011 CATERPILLAR M318 D W/ PLUMBING ON STICK W/ CAB W/ A/C & HEAT E7104
                                6 CYL CAT ENGINE, POWERSHIFT TRANS, 10.00 - 20 IN TIRES , 44 IN BUCKET, PLUMBING ON STICK, ENCLOSED CAB W/ A/C & HEAT
                                2012 CATERPILLAR M318 D W/ PLUMBING ON STICK & CAB W/ A/C & HEAT -
                                $87,500
                                2012 CATERPILLAR M318 D W/ PLUMBING ON STICK & CAB W/ A/C & HEAT -
                                6 CYL CAT ENGINE, 10.00-20 TIRES, 70 IN BUCKET, TWIST A WRIST, MANUAL THUMB, ENCLOSED CAB W/ A/C & HEAT
                                10" x 6" KALAMAZOO MODEL H10A HORIZONTAL BAND SAW
                                $RFQ
                                10" x 6" KALAMAZOO MODEL H10A HORIZONTAL BAND SAW
                                <p><strong>10" x 6" KALAMAZOO MODEL H10A HORIZONTAL BAND SAW</strong></p> <p>Serial No. 83016</p> <p>Capacity: 10 inch round and 6 inch x 10 inch rectangular</p> <p>B
                                4000 LB. P.A. PALLETIZER PR4 FLAT STRIP PALLET DECOILER
                                $RFQ
                                4000 LB. P.A. PALLETIZER PR4 FLAT STRIP PALLET DECOILER
                                4000 LB. P.A. PALLETIZER PR4 FLAT STRIP PALLET DECOILER MAXIMUM PALLET WEIGHT --------------------- 4,000 LBS. TABLE DIAMETER ------------------------------- 42" MAXIMUM STOCK WIDTH -----------------
                                • Maximum weight capacity: 4000Lb
                                • Maximum coil width: 6"
                                  Categories:
                                  Condition:
                                  Manufacturer:
                                  Location:
                                  Price:
                                  •  to 
                                  <Prev | 161 | 162 | 163 | 164 | 165 | 166 | 167 | 168 | 169 | 170 | Next>