buy & sell, new & used machinery, machine tools & equipment

<Prev | 741 | 742 | 743 | 744 | 745 | 746 | 747 | 748 | 749 | 750 | Next>
Refine: Viewing 14861 - 14880 of 19763 matches
Sort by:
Items Per Page:  20  |  50 |  100
EVERETT ABRASIVE CUT-OFF SAW - 10"
$RFQ
EVERETT ABRASIVE CUT-OFF SAW - 10"
SPECIFICATIONS WHEEL CAPACITY: 10″ WHEEL ARBOR SHAFT: 5/8″ ARBOR DRIVE: DUAL RAW EDGE SURE GRIP “V” BELT WITH STEEL SHEAVES CAPACITY: 1-1/2″ SOLID 2″ PIPE MOTOR: 3 HP SPECIAL HI-TORQUE MOTOR TOTALLY ENCLOSED FAN-COOLED S
  • Blade diameter: 10"
    BROWN & SHARPE MICROMASTER 612 HAND FEED GRINDER - 6" X 12"
    $RFQ
    BROWN & SHARPE MICROMASTER 612 HAND FEED GRINDER - 6" X 12"
    SPECIFICATIONS GRINDING CAPACITY: 6” W X 12” L HEIGHT OF WORK GROUND WITH WHEEL – 8” OD X 1-1/4” HOLE: 12” DISTANCE – CENTER OF WHEEL SPINDLE TO TOP OF TABLE: 16” MAX – 3.5” MIN SPINDLE ANTI-FRICTION BEARING UNIT WITH O
    • Table width: 6"
    • Table length: 12"
      1977 - COILMATIC AIR FEED WITH PULL THRU STRAIGHTNER - 24" X .090"
      $RFQ
      1977 - COILMATIC AIR FEED WITH PULL THRU STRAIGHTNER - 24" X .090"
      SPECIFICATIONS CAPACITY: 24″ X .090″ FEED STROKE, ADJUSTABLE: 0″ – 15″ FEED RATES: 70 SPM @ 15″ STROKE (5) HARDENED STRAIGHTENER ROLLS: 3″ DIAMETER, ADJUSTABLE UPPER STRAIGHTENER ROLLS, MANUAL (CRANK) ADJUSTMENT TO FEE
      1977 - COILMATIC AIR FEED WITH PULL THRU STRAIGHTENER - 24" X .090"
      $RFQ
      1977 - COILMATIC AIR FEED WITH PULL THRU STRAIGHTENER - 24" X .090"
      SPECIFICATIONS CAPACITY: 24″ X .090″ FEED STROKE, ADJUSTABLE: 0″ – 15″ FEED RATES: 70 SPM @ 15″ STROKE (5) HARDENED STRAIGHTENER ROLLS: 3″ DIAMETER, ADJUSTABLE UPPER STRAIGHTENER ROLLS, MANUAL (CRANK) ADJUSTMENT TO FEE
      1973 - U S BAIRD 1 SPRING GENERATOR - .008" - .034"
      $RFQ
      1973 - U S BAIRD 1 SPRING GENERATOR - .008" - .034"
      SPECIFICATIONS MAXIMUM WIRE DIAMETER: .034″ MINIMUM WIRE DIAMETER: .008″ WIRE FEED LENGTH, RANGE: 6.45″ – 25.78″ WITH OPTIONAL CHANGE GEARS PRODUCTION SPEEDS, PIECES PER HOUR: 600 TO 5000 MOTOR HORSEPOWER: 1/2 HP GENERA
      • Wire diameter: 0.034"
        1962 - SUNNEN MBB1600 HORIZONTAL HONE - .060" - 6.5"
        $RFQ
        1962 - SUNNEN MBB1600 HORIZONTAL HONE - .060" - 6.5"
        SPECIFICATIONS ID RANGE: 0.060″ TO 6.5″ SPEEDS (12): 200 – 1600 RPM (STEP PULLEY) HONE BORES UP TO 16″ IN LENGTH DEPENDING ON BORE DIAMETER GENERAL DIMENSIONS: 30″ L-R X 60″ F-B X 63″ H WEIGHT, APPROX: 600 LBS ELECTR
        • Maximum diameter: 6.5"
        • Stroke: 16"
          1994 - HANKISON 80400 WATER COOLED AIR DRYER - 400 SCFM
          $RFQ
          1994 - HANKISON 80400 WATER COOLED AIR DRYER - 400 SCFM
          SPECIFICATIONS MINIMUM-MAXIMUM OPERATING CONDITIONS MIN INLET AIR PRESSURE (COMPRESSED AIR AT INLET TO DRYER): 10 PSIG (.70 BAR) MAX INLET AIR PRESSURE (COMPRESSED AIR AT INLET TO DRYER): STANDARD: 200 PSIG (14 BAR) OPT
          • Cubic feet per minute: 300CFM
            1981 - MANURHIN AUTOMATIC 3-39 BARFEED - 1.5" X 12 FT
            $RFQ
            1981 - MANURHIN AUTOMATIC 3-39 BARFEED - 1.5" X 12 FT
            SPECIFICATIONS MAXIMUM BAR LENGTH: 12′ MAXIMUM BAR DIAMETER, APPROX: 1-1/2″ NUMBER OF TUBES: 5 GENERAL HYDRAULIC UNIT DIMENSIONS: 31″ L-R X 18″ F-B X 28″ H BAR FEEDER DIMENSIONS: 16″ L-R X 18′ F-B X 17″ H ELECTRICS: 220
            • Maximum bar diameter: 1.5"
            • Maximum bar length: 12'
              1988 - HANSVEDT SM150B RAM TYPE EDM - 20 AMPS
              $RFQ
              1988 - HANSVEDT SM150B RAM TYPE EDM - 20 AMPS
              SPECIFICATIONS WORK TABLE SIZE: 9″ X 15″ WORK TANK SIZE: 13″ X 20″ X 9″ DEEP TABLE POSITIONING LONGITUDINAL TRAVEL: 8″ TABLE POSITIONING CROSS TRAVEL: 6″ PLATEN TO TABLE DISTANCE: 16″ MAXIMUM RAM TRAVEL: 6″ RAM PLATEN SI
              • Power: 20A
              • Table width: 15"
                (3) HARDINGE CL-SE EXTENSION TOOLHOLDER - FOR T51 OR T65
                $RFQ
                (3) HARDINGE CL-SE EXTENSION TOOLHOLDER - FOR T51 OR T65
                FITS HARDINGE MODEL T51 OR T65 CNC LATHES
                HARDINGE CL-56 END TAPPING TOOLHOLDER - FOR T51 OR T65 CNC LATHE
                $RFQ
                HARDINGE CL-56 END TAPPING TOOLHOLDER - FOR T51 OR T65 CNC LATHE
                SPECIFICATIONS FITS HARDINGE MODEL T51 OR T65 CNC LATHES
                HARDINGE CL-56 END TAPPING TOOLHOLDER - FOR T51 OR T65 CNC LATHE
                $RFQ
                HARDINGE CL-56 END TAPPING TOOLHOLDER - FOR T51 OR T65 CNC LATHE
                SPECIFICATIONS FITS HARDINGE MODEL T51 OR T65 CNC LATHES
                MFG UNKNOWN GLASS FRONT/ 2 DOOR CABINET - 36" X 24" X 78"
                $RFQ
                MFG UNKNOWN GLASS FRONT/ 2 DOOR CABINET - 36" X 24" X 78"
                SPECIFICATIONS 4 SHELF GLASS FRONT 2 DOOR CABINET GENERAL DIMENSIONS: 36″ L-R X 24″ F-B X 78″ H WEIGHT, APPROX: 200 LBS
                MARELCO CL000876-14 TRANSFORMER - 50 KVA
                $RFQ
                MARELCO CL000876-14 TRANSFORMER - 50 KVA
                SPECIFICATIONS PRIMARY VOLTS – 200/230/380/415 V DELTA SECONDARY – 230 WYE +/- 5% + 10% TAPS WITH NEUTRAL
                • Power: 50KVA
                  HARDINGE 6" 3-JAW CHUCK - 6" 3-JAW
                  $RFQ
                  HARDINGE 6" 3-JAW CHUCK - 6" 3-JAW
                  SPECIFICATIONS DIAMETER: 6″ HOLE: 1.5″
                  HARDINGE A SQUARE PRODUCTION TOOLPOST
                  $RFQ
                  HARDINGE A SQUARE PRODUCTION TOOLPOST
                  USED HARDINGE MODEL A SQUARE PRODUCTION TOOLPOST
                  MARELCO PTM-9263E TRANSFORMER - 50 KVA
                  $RFQ
                  MARELCO PTM-9263E TRANSFORMER - 50 KVA
                  SPECIFICATIONS PRIMARY: 208 VOLTS SECONDARY: 230 VOLTS KVA RATING: 50
                  • Power: 50KVA
                    EXSYS/EPPINGER S20 DEAD LENGTH COLLET - 2"
                    $RFQ
                    EXSYS/EPPINGER S20 DEAD LENGTH COLLET - 2"
                    SPECIFICATIONS BAR CAPACITY: 2″ SPINDLE MOUNT: A2-6 USES HARDINGE S20 STYLE COLLET PADS DEAD LENGTH/PUSH TYPE ACTUATION
                    MTC E-4436 DIE HANDLER/FLIPPER - 2,500 LBS
                    $RFQ
                    MTC E-4436 DIE HANDLER/FLIPPER - 2,500 LBS
                    SPECIFICATIONS LOAD CAPACITY: 2,500 LBS WORKING AREA UPPER PLATEN: 12″ X 38″ CENTER PLATEN: 26″ X 39-1/2″ PLATEN CLEARANCE 0 DEGREES MAXIMUM: 27″ 0 DEGREES MINIMUM: 9″ 180 DEGREES MAXIMUM: 21-1/4″ 180 DEGREES MINIMUM:
                    1994 - HARDINGE EC-12-0750 HYDRODYNAMIC BARFEED - 3/4" X 12'
                    $RFQ
                    1994 - HARDINGE EC-12-0750 HYDRODYNAMIC BARFEED - 3/4" X 12'
                    SPECIFICATIONS MAX. CAPACITY: 3/4″ X 12′ FEATURES ROTATING MULTI TUBE DESIGN WITH 4 TUBES
                    • Maximum bar diameter: 0.75"
                    • Maximum bar length: 12'
                      Categories:
                      Condition:
                      Manufacturer:
                      Location:
                      Price:
                      •  to 
                      <Prev | 741 | 742 | 743 | 744 | 745 | 746 | 747 | 748 | 749 | 750 | Next>