buy & sell, new & used machinery, machine tools & equipment

<Prev | 271 | 272 | 273 | 274 | 275 | 276 | 277 | 278 | 279 | 280 | Next>
Refine: Viewing 5521 - 5540 of 20555 matches
Sort by:
Items Per Page:  20  |  50 |  100
LNS SUPER HYDROBAR 3.12 HS-4.8 HYDROSTATIC 12' BAR FEED, 08'
$RFQ
LNS SUPER HYDROBAR 3.12 HS-4.8 HYDROSTATIC 12' BAR FEED, 08'
MAX BAR LENGTH: 12' CAPACITIES .670 FOR 1/2" TO 5/8" .551 FOR 1/4" TO 1/2" .315 FOR 1/16" TO 1/4" (3) TUBES APPROX DIMENSIONS: 200" X 35" X 50" H NO PLUGS W
  • Maximum bar diameter: 0.625"
  • Maximum bar length: 12'
    LNS Super Hydrobar 3.12 HS-4.8 Hydrostatic 12' Bar Feed
    $RFQ
    LNS Super Hydrobar 3.12 HS-4.8 Hydrostatic 12' Bar Feed
    Max Bar Length: 12' Capacities .670 for 1/2" to 5/8" .551 for 1/4" to 1/2" .315 for 1/16" to 1/4" (3) Tubes Approximate Dimensions 200" x 35" x 50"H No plug
    • Maximum bar diameter: 0.625"
    • Maximum bar length: 12'
      2003 SODICK AQ325L CNC WIRE EDM
      $28,500
      2003 SODICK AQ325L CNC WIRE EDM
      LINEAR WAYS, AUTOTHREADING, SUBMERGED, LQ1W CNC CONTROL
      • X axis travel: 13.7"
      • Y axis travel: 9.8"
        Router FxdBs Trim Rckwl
        $149
        Router FxdBs Trim Rckwl
        Router FxdBs Trim Rckwl Model: 2082 Type 1 [Rockwell] S/N: N/A Fixed Base Trim Router 4Amp; 1Ph; 115Volt
        Planer 2-1/2" PortaPlane
        $200
        Planer 2-1/2" PortaPlane
        Planer 2-1/2" PortaPlane Model: 126 [Rockwell] S/N: A116295 7.0 Amp; 1Ph; 120Volt
        Miter Saw 12"-Ridgid
        $199
        Miter Saw 12"-Ridgid
        Miter Saw 12"-Ridgid Model: 40J7 [Ridgid] S/N: E85575A 15Amp; 1Ph; 120Volt
        Wide Blt Sndr 1632 5/1-PM
        $4,599
        Wide Blt Sndr 1632 5/1-PM
        Wide Blt Sndr 1632 5/1-PM Model: 1791250 1632-1 [Powermatic] S/N: 02011632169 Wide Belt Sander w/Mobile Base; 8 Extra Sanding Belts 5Hp; 1Ph; 230Volt
        2008 Haas SL30T with Live Milling
        $RFQ
        2008 Haas SL30T with Live Milling
        2008 Haas SL30T with Live Milling Bar Capacity: 3" Chuck Size: 10" Spindle Speed: 3,400 RPM Spindle Motor: 30 HP X Axis Travel: 9.4" Z Axis Travel: 32.5" Rapid Rate Z Axis: 945 IPM Turret To
        1999 - 22 Ton Strippit 1250H/20 CNC Turret Punch
        $RFQ
        1999 - 22 Ton Strippit 1250H/20 CNC Turret Punch
        Capacity 22 Tons Travels 39" x 50" Max Sheet Size 120" x 50" Max Hole Diameter 3.5 Weight 25,000 lbs Equipped with: Fanuc OP Control 20 Stations w/ 3 A/I 2 Work Clamps Brush Table
        • Tonnage: 22T
          BURN OFF OVEN, POLLUTION CONTROL 36"W 21"L 33"H
          $RFQ
          BURN OFF OVEN, POLLUTION CONTROL 36"W 21"L 33"H
          SINGLE SIDE SWING DOOR WITH POSITIVE LATCHING AND PRESSURE RELIEF ROOF PANEL. INSIDE WALLS, ROOF AND DOOR ARE LINED WITH LIGHT WEIGHT REFRACTORY. FLOOR IS A POURED CASTABLE REFRACTORY. TWO PACKAGE BURNERS (300,000 BTU/HR
          40 HP AIR COMPRESSOR, INGERSOLL RAND
          $RFQ
          40 HP AIR COMPRESSOR, INGERSOLL RAND
          40 HP WITH DRYER AND TANK, LATE MODEL. SHIP FROM SYRACUSE,NY
          • Motor: 40HP
            BURN OFF OVEN, TOP LOAD, POLLUTION CONTROL, 3'W 3'L 3'H
            $RFQ
            BURN OFF OVEN, TOP LOAD, POLLUTION CONTROL, 3'W 3'L 3'H
            TOP LOAD DESIGN WITH HAND OPERATED COVER. LIGHT WEIGHT REFRACTORY LINING ON WALLS AND DOOR. FLOOR IS A POURED CASTABLE REFRACTORY. HEAT FOR MAIN HEAT AND AFTERBURNER ARE SUPPLIED BY PACKAGE BURNERS (
            INERT ATMOSPHERE OVEN, DESPATCH 25"W 25"L 25"H, 1000 F
            $RFQ
            INERT ATMOSPHERE OVEN, DESPATCH 25"W 25"L 25"H, 1000 F
            INERT ATMOSPHERE OVEN HAS SINGLE SIDE SWING DOOR WITH POSITIVE LATCHING. HEATING AIR IS CIRCULATED HORIZONTALLY. INTERIOR HAS PROVISIONS FOR (8) SHELVES, (4) SHELVES ARE INCLUDED. ORIGINALLY DESIGNED FOR STRESS RELIEVIN
            • Chamber width: 25"
            • Chamber length: 25"
              QUINCY 50 HP ROTARY SCREW AIR COMPRESSOR
              $RFQ
              QUINCY 50 HP ROTARY SCREW AIR COMPRESSOR
              50 HP FIXED SPEED ROTARY SCREW COMPRESSOR RATED 226 ACFM. @ 100 PSI. PURCHASE NEW 2016 NEVER USED.
              • Motor: 50HP
                ROLLER CONVEYOR OVEN, FB SERIES, 4'W 8'L 56"H, 500 F GAS
                $RFQ
                ROLLER CONVEYOR OVEN, FB SERIES, 4'W 8'L 56"H, 500 F GAS
                DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES AT BOTH FRONT AND REAR. INTERIOR HAS A GRAVITY ROLLER CONVEYOR. HEAT IS SUPPLIED BY A GAS BURNER FIRING INTO A PROTECTED CHAMBER ABOVE WORK AREA AND CIRCULATED BY (2) ROOF M
                • Chamber width: 48"
                • Chamber length: 96"
                  VACUUM FURNACE, SURFACE COMBUSTION 36"W 48"L 24"H, 1350 F
                  $RFQ
                  VACUUM FURNACE, SURFACE COMBUSTION 36"W 48"L 24"H, 1350 F
                  HORIZONTAL DOUBLE WALLED WATER COOLED CHAMBER WITH SINGLE SIDE SWING BOLT DOWN FRONT DOOR. WHEN PROCESS BEGINS VACUUM PUMPS EVACUATE THE VESSEL. WHEN COMPLETE VESSEL IS BACK FILLED WITH NITROGEN. HEAT IS
                  • Chamber width: 36"
                  • Chamber length: 48"
                    CAR BOTTOM FURNACE, BEAVERMATIC, 1500 F GAS 7'W 10'L 7'H
                    $RFQ
                    CAR BOTTOM FURNACE, BEAVERMATIC, 1500 F GAS 7'W 10'L 7'H
                    HEAT (4,100,000 BTU/HR MAX TOTAL 5-7 PSI) IS SUPPLIED BY (9) NOZZLE MIX BURNERS WITH SPARK IGNITION AND FLAME SAFETY FIRING FROM ABOVE AND BELOW WORK AREA.. INTERIOR IS LINED WITH LIGHT WEIGHT REFRACTORY. CAR IS ELECTR
                    • Chamber width: 84"
                    • Chamber length: 120"
                      VACUUM FURNACE, SECO WARWICK BOTTOM LOAD 48"DIA 48"H 2200 F
                      $RFQ
                      VACUUM FURNACE, SECO WARWICK BOTTOM LOAD 48"DIA 48"H 2200 F
                      BOTTOM LOAD VERTICAL VACUUM FURNACE WITH METALLIC HOT ZONE AND HEATING ELEMENTS HAVING CAPACITY OF: 1000 LBS @ 1000C. HEATING ELEMENTS ARE MOUNTED IN FLOOR BELOW HEARTH,ON ROOF & SIDE WALL. POWER TO HEATING ELEM
                      • Chamber width: 48"
                      • Chamber length: 48"
                        Amada HG2204RH 220 Ton x 14' 8-Axis CNC Press Brake W/Robotic Manipulat
                        $RFQ
                        Amada HG2204RH 220 Ton x 14' 8-Axis CNC Press Brake W/Robotic Manipulat
                        Reference #32512 Amada HG2204RH 220 Ton x 14' 8-Axis CNC Press Brake W/Robotic Manipulator FEATURES: Yaskawa Motoman 6-Axis Robot 5-Axis CNC Back Gauge Part Load, Manipulator and Unload System CAPACITIES:
                        • Tonnage: 220T
                          Doosan BM-2740M CNC Bridge Type Vertical Machining Center
                          $RFQ
                          Doosan BM-2740M CNC Bridge Type Vertical Machining Center
                          Reference #32749 Doosan BM-2740M CNC Bridge Type Vertical Machining Center FEATURES: Fanuc 31iB CNC Control 60-Station Automatic Tool Changer Thru Spindle Coolant 4-Axis Ready SPECIFICATIONS: X-Axis Travel ..
                          Categories:
                          Condition:
                          Manufacturer:
                          Location:
                          Price:
                          •  to 
                          <Prev | 271 | 272 | 273 | 274 | 275 | 276 | 277 | 278 | 279 | 280 | Next>