buy & sell, new & used machinery, machine tools & equipment

<Prev | 69 | 70 | 71 | 72 | 73 | 74 | 75 | 76 | 77 | 78 | Next>
Refine: Viewing 1381 - 1400 of 19828 matches
Sort by:
Items Per Page:  20  |  50 |  100
POLLUTION CONTROL VPI 52 BURN OFF OVEN 42"W 48"L 44"H
$RFQ
POLLUTION CONTROL VPI 52 BURN OFF OVEN 42"W 48"L 44"H
DIGITAL CONTROLS SINGLE SIDE SWING DOOR WITH POSITIVE LATCHING AND PRESSURE RELIEF ROOF PANEL. INTERIOR DOORS, WALLS AND ROOF ARE LINED WITH LIGHT WEIGHT FIBER REFRACTORY. FLOOR IS A POURED CASTABLE REFRACTORY. HEAT (35
KOIKE-ARONSON PLASMA ARC CUTTING SYSTEM WITH TABLE 10'CAPACITY
$RFQ
KOIKE-ARONSON PLASMA ARC CUTTING SYSTEM WITH TABLE 10'CAPACITY
NEW 2004 CAPACITY 3100MM (122") ORDER # S0178105 HYPERTHERM HYSPEED HT2000 POWER SUPPLY
GASBARRE 2150 F ELECTRIC ATMOSPHERE BOX FURNACE 28"W 48"L 28"
$RFQ
GASBARRE 2150 F ELECTRIC ATMOSPHERE BOX FURNACE 28"W 48"L 28"
DIGITAL CONTROLS ELECTRICALLY HEATED ATMOSPHERE (HYDROGEN & NITROGEN) RETORT BOX FURNACE WITH SIDE SWING DOOR (WATER COOLED DOOR FLANGE). INTERIOR HAS AN ALLOY RETO
  • Chamber width: 28"
  • Chamber length: 48"
    ABBOTT 2100 F ATMOSPHERE 12"WIDE BELT FURNACE
    $RFQ
    ABBOTT 2100 F ATMOSPHERE 12"WIDE BELT FURNACE
    DIGITAL CONTROLS 12"WIDE ATMOSPHERE BELT FURNACE WITH ALLOY RETORT CURRENTLY USING A 10"WIDE BELT. PARTS ARE LOADED ON THE VARIABLE SPEED MESH BELT AT 6'LONG ENTRANCE TABLE, PASS THROUGH 3' ENTRANCE P
    • Chamber width: 12"
    • Chamber length: 216"
      STEELMAN GAS FIRED BURN OFF OVEN 6'W 3'L 3'H
      $RFQ
      STEELMAN GAS FIRED BURN OFF OVEN 6'W 3'L 3'H
      DIGITAL CONTROLS DOUBLE DOOR OPENING WITH POSITIVE LATCHING. PRIMARY HEAT CHAMBER AND AFTER BURNER CHAMBER ARE MOUNTED ON REAR WALL WITH HEAT (351,000 BTU/HR MAX. TOTAL) SUPPLIED BY TWO PACKAGE BURNERS. HEAT FLOW IS &q
      LUCIFER 1450 F TWO CHAMBER ELECTRIC FURNACE
      $RFQ
      LUCIFER 1450 F TWO CHAMBER ELECTRIC FURNACE
      DIGITAL CONTROLS (2) CHAMBER BOX FURNACE WITH SIDE SWING DOORS AND REAR MOUNTED AIR CIRCULATING FANS. THE TOP CHAMBER IS 18"LONG . BOTTOM CHAMBER IS 48"L
      • Chamber width: 18"
      • Chamber length: 48"
        FADAL VMC 15 VERTICAL MACHINING CENTER 1994
        $RFQ
        FADAL VMC 15 VERTICAL MACHINING CENTER 1994
        FADAL VMC 15 VERTICAL MACHINING CENTER 1994 Serial # 9404163 MODEL........................: 914-15 TRAVELS: X............................: 20" Y............................: 16" Z.....................
        Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999
        $RFQ
        Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999
        Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999 S/N 9910278 Fadal CNC 88 HS CNC Controller, 21-Automatic Tool Changer, CAT40 Taper, Work Light Table Size: 38″x16″ Travels: X Axis 30″ Y Axis
        Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999
        $RFQ
        Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999
        Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999 S/N 9910278 Fadal CNC 88 HS CNC Controller, 21-Automatic Tool Changer, CAT40 Taper, Work Light Table Size: 38″x16″ Travels: X Axis 30″ Y Axis
        3/4" X 30" Eldorado Mega Model M-75-1041 Precision Deep Hole Gun
        $RFQ
        3/4" X 30" Eldorado Mega Model M-75-1041 Precision Deep Hole Gun
        SPECIFICATIONS: Drilling Diameter Maximum .75” Drilling Diameter Minimum .055” Maximum Drilling Depth 30” Spindle Speeds 725-5860 RPM Drilling Feed Rate .1-99.9 IPM Rapid Feed Rate 200 IPM Work Table 22” x 26” H
        Johnford SV-40 CNC Vert Machining Cntr, 47" x20" tbl, XYZ=41/20/2
        $RFQ
        Johnford SV-40 CNC Vert Machining Cntr, 47" x20" tbl, XYZ=41/20/2
        JOHNFORD SV-40 CNC VERTICAL MACHINING CENTER Model SV-40, S/N MLB130534, New 2013 Stock # Q11996 EQUIPPED WITH: Fanuc 0i CNC Control, 10000 RPM Cat 40 Spindle, 24 ATC, Spindle Chiller, Chip Pan. SPECIFICATIONS:
        • X axis: 41"
        • Y axis: 20"
          Est. 2019 Hitachi ZAXIS 250LC-6 Excavator RTR#5013076-01
          $49,000
          Est. 2019 Hitachi ZAXIS 250LC-6 Excavator RTR#5013076-01
          Unit located in Harriman, TN. Est. 2019 Hitachi ZAXIS 250LC-6 Excavator w/ Bucket, Isuzu 4HK1 Diesel Engine, Hyd Transmission, Enclosed Cab, A/C, Heater, Air Ride Seat, AM/FM Radio, Hyd Thumb, Hour Meter Reads: 2,327 (
          8' x 1/2" Bertsch 3-Roll Plate Bending Roll w/Air Drop End, Initia
          $RFQ
          8' x 1/2" Bertsch 3-Roll Plate Bending Roll w/Air Drop End, Initia
          8' x 1/2" BERTSCH 3-ROLL INITIAL PINCH PLATE BENDING ROLL Model #9, S/N M-9980, New 1971 Stock # Q12014 EQUIPPED WITH: 3-Roll Hydraulic Initial Pinch Design, Air Drop End, Power Bottom-Roll Adjustment, Dia
          • Roll length: 99"
          • Thickness: 0.406"
            HAAS HL-2BB CNC LATHE
            $5,950
            HAAS HL-2BB CNC LATHE
            BIG BORE, PARTS CATCHER, CHIP CONVEYOR, 3400 RPM, 15 HP, 10"CHUCK
            • Swing: 20"
            • Centers: 20"
              Thermo Scientific Heratherm IMH180 Benchtop Incubator, 6.3 CU FT Capacity
              $RFQ
              Thermo Scientific Heratherm IMH180 Benchtop Incubator, 6.3 CU FT Capacity
              THERMO FISHER SCIENTIFIC BENCHTOP INCUBATOR Model Heratherm IMH180, New 2015 Stock # Q11725, Q11726 (2) Incubators Available FEATURES: Advanced Protocol Microbiological Incubator Capacity 6.3 cu ft (178L) Dual
              CHEVALIER FSG-3A818 SURFACE GRINDER
              $8,950
              CHEVALIER FSG-3A818 SURFACE GRINDER
              2 HP, 8" GRINDING WHEEL
              • Table width: 8"
              • Table length: 18"
                16-36 Barber Colman Universal Gear Hobber
                $RFQ
                16-36 Barber Colman Universal Gear Hobber
                SPECIFICATIONS: Maximum Rated Diameter Pitch (Nominal) 6DP (4.2 Module) Maximum Rated Work Diameter 16” Maximum Hob Diameter 5” Maximum Hob Slide Travel 36” Maximum Work Slide Travel 8” Main Drive Motor 5HP Approx
                No. 16-36 Barber-Colman Universal Gear Hobber
                $RFQ
                No. 16-36 Barber-Colman Universal Gear Hobber
                SPECIFICATIONS: Capacity in Steel, 1 Cut 6 DP (4.2 Mod) Rated Work Diameter Max 16” Travel of Hob Carriage Max 36.5” Distance Work Spindle Face to Tail Center Max 64” Work Spindle to C/L of Hob Spindle Max 39.5” Wo
                Haas VF-2SS Machining Center
                $51,500
                Haas VF-2SS Machining Center
                Table: 14" x 36" Spindle: CAT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 24 RPM: 12,000RPM Controller: Haas Year: 2017 4th axis: Ready 5th axis: Available
                Fadal VMC15 Machining Center
                $19,000
                Fadal VMC15 Machining Center
                Table: 16" x 39" Spindle: BT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 21 RPM: 7,500RPM Controller: Fadal Year: 2006 Voltage / Phase: 220 / 3 Weight: 11,0
                Categories:
                Condition:
                Manufacturer:
                Location:
                Price:
                •  to 
                <Prev | 69 | 70 | 71 | 72 | 73 | 74 | 75 | 76 | 77 | 78 | Next>