Machine Sales – Buy or Sell New and Used Machinery and Machine Tools at Machine Sales

$4,450

Year: ? Make: wysong Model: A-72 Condition: Good Electrical: air operated Machine Status: Can be powered up Shipping Info: We can load Weight: 2000 Dimension: L x W x H 9ft x 4ft x 5ft Machine Location:

Mooresville, NC
View Listing

custom built manual slip roll

$3,995

Year: ? Make: custom Model: 9ft x 18ga Condition: Good Machine Status: Shipping Info: We can load Weight: 600 Dimension: L x W x H 10ft x 2ft x 4ft Machine Location: City: On Request State: North Carol

Mooresville, NC
View Listing

Longem 26 x 120" manual gap bed lathe #LG26120

$5,750

Year: 199? Make: Longem Model: LG26120C Condition: Good Electrical: 230/460/3 wired 230 Machine Status: Under Power Shipping Info: We can load Weight: 8000 Machine Location: City: On Request State: Nor

Mooresville, NC
View Listing

1998 Fadal VMC # 917/5020AHT

$13,995

Year: 1998 Make: Fadal Model: #917-1/5020AHT Condition: Good Electrical: 230/460/3 wired 230 Machine Status: Under Power Shipping Info: Rigging Fee Extra Weight: 8500 Machine Location: City: On Request

X axis: 50"
Y axis: 20"

Mooresville, NC
View Listing

FANUC ARC MATE Sys. R-J3-100I Robot & Genesis Table/Lincoln Power Wave

$25,000

FANUC ARC MATE SYSTEM R-J3-100I Robot w/ Genesis Turn Table and Program Pad Lincoln Power Wave 450, Serial Number: F42671 Asking price is $25,000 OBO. Please contact Michael O'Dwyer for any questions: 262

Kenosha, WI
View Listing

1969 Pacific #K400-17 hyd. press brake

$25,950

Year: 1969 Make: Pacific Model: K400-17 Condition: Good Electrical: 230/460/3 wired 460 Machine Status: Can be powered up Shipping Info: Rigging Fee Extra Weight: 75,000 Dimension: L x W x H 18'x8'

Tonnage: 400T

Mooresville, NC
View Listing

Gray Series 60 Vertical Turret Lathe

$94,495

Year: 1968 Make: Gray Model: Series 60 Condition: Good Electrical: 460/3Phase Machine Status: Under Power Shipping Info: Requires rigger Machine Location: City: On Request State: North Carolina Category:

Mooresville, NC
View Listing

Bariola 12' x 3/8" Shear Model CB 29 LS

$26,995

Year: 1986 Make: Bariola Model: CB29LS Condition: Good Electrical: 220/440v 3ph 60hz 65Amps, Machine Status: Can be powered up Shipping Info: We can load Machine Location: City: On Request State: Minnesota

Mooresville, NC
View Listing

20,000Lb Forte L-Type Coil Car

$RFQ

Make: Forte Equipment Model: CLC -240 L-Type Floor Standing Design Weight Capacity: 20,000Lb Coil Width: 60" Hydraulic Lift Powered Traverse Self - Contained Hydraulics Controls Console

West Bloomfield, MI
View Listing

5" SUMMIT CNC TABLE TYPE HORIZONTAL BORING MILL, MODEL HTM5

$RFQ

5" SUMMIT CNC TABLE TYPE HORIZONTAL BORING MILL MODEL HTM5 S/N 07-LB-125 NEW 1997 SPINDLE DIAMETER ------------------------------- 4-15/16"

Spindle diameter: 5"
X axis travel: 98"

Des Plaines, IL
View Listing

33 Ton, AMADA, VIPROS 3610L, L-SHEAR, 6 SHELF LOADER, UNLOAD CONVEYOR,MFG:2

$RFQ

33 TON AMADA VIPROS 3610L TURRET PUNCH W/ L SHEAR, AS 651H (6) SHELF LOADER W/ 5' X 10' CAPACITY, REAR SIDE PART UNLOAD CONVEYOR MFG:2000

Tonnage: 33T

NEW CITY, NY
View Listing

4000 WATT AMADA,GEMINI FO-3015, 5' X 10',MFG:2002 APPROX:52,500 HOU

$RFQ

4000 WATT AMADA GEMINI F0-3015 CNC LASER CUTTER 52,500 TOTAL HOURS - LAST TURBO REPLACED @ 32,643 (24K TYPE) MFG:2002

Wattage: 4000W

NEW CITY, NY
View Listing

(4) 13" x 9.5" Face Plate Type Chuck Jaws

$RFQ

Reference #28372 (4) 13" x 9.5" Face Plate Type Chuck Jaws Center Distance ................... 7" Hole Diameter ..................... 7/8" Approximate Jaw Travel ............ 7" - 7.5&q

Diameter: 7"
# Jaws: #4

Melville, NY
View Listing

TAKISAWA TC-4 CNC TURNING CENTER

$24,300

TAKISAWA TC-4 CNC TURNING CENTER Make: Takisawa Model No.: TC-4 Serial No.: THXW1291 Condition: Very Good Comes with 12" Chuck, Tailstock & Chip Conveyor All specifications are approximations, and

Swing: 23.62"
Centers: 44"

Chino, CA
View Listing

1995 CATERPILLAR 135H MOTOR GRADER

$64,500

6 CYL CAT ENGINE, 8 SPD TRANS, 14 FT BLADE, 14.00R24 TIRES, ENCLOSED CAB W/ HEAT, 2337 HRS SHOWING

Sutherlin, VA
View Listing

3/8" Lewis 3SV8 Straighten & Cut Machine

$RFQ

No description providedCapacity3/16" - 3/8" Minimum Length3" Maximum Length12' Variable Speed Range60 - 350 FPM HP25 Electrics440V

Ivyland, PA
View Listing

Wafios Model AHSP1 Uncoiler

$RFQ

No description provided

Ivyland, PA
View Listing

5 HP Air Compressor

$RFQ

Electrical Disconnect And Motor Starter

Ivyland, PA
View Listing

Akyapak AK Bend Hydraulic 4-roll Bending Roll Model AHS 30/06-Special

$RFQ

Capacities in carbon (mild) steel with 36,000 PSI yield strength: Pre-bending capacity- 10' x 12 gauge to 6" ID Capacities in stainless steel Type 304/316L: Pre-bending capacity0 5' x 12 gauge to 6&

Roll length: 120"
Thickness: 0.1"

Lynchburg, VA
View Listing

MITSUBISHI FX-10 WIRE EDM

$24,950

5-AXIS, AUTO LUBE, 25" X 21" TABLE, AUTO WIRE FEED

X axis travel: 13.77"
Y axis travel: 9.84"

THOUSAND OAKS, CA
View Listing

2011 Hardinge Bridgeport GX 480 APC CNC Vertical Machining Center

$32,500

Specifications: Control ................................................................... Fanuc Oi-MD Table Size ......................................................... (2) 23.6” x 15.8" Max Table Load ....

X axis: 18.9"
Y axis: 15.7"

Schaumburg, IL
View Listing

PROTARC ZAAR ALUMINUM FRAME WELDING UNIT, MODEL PT-ENS50-126

$RFQ

PROTARC ZAAR ALUMINUM FRAME WELDING UNIT, MODEL PT-ENS50-126 S/N 3550. STOCK #18209

Des Plaines, IL
View Listing

21"/32" X 120" COLCHESTER MASTIFF 1400 GAP BED LATHE

$RFQ

21"/32" X 120" COLCHESTER MASTIFF 1400 GAP BED LATHE S/N LMF12B1LFV07255 NEW 1990 SWING OVER BED ------------------------------- 21" SWING OVER CROSS SLIDE --------

Swing: 21"
Centers: 120"

Des Plaines, IL
View Listing

5" WOTAN TABLE TYPE HORIZONTAL BORING MILL

$RFQ

5" WOTAN TABLE TYPE HORIZONTAL BORING MILL MODEL B-130 DIAMETER OF SPINDLE ----------------------- 5" SPINDLE TAPER ------------------------------- #50 SPINDLE OUT TRAVEL ------

Spindle diameter: 5"
X axis travel: 56"

Des Plaines, IL
View Listing

Wafios Model FTU-0 Spring Coiling Machine

$RFQ

No description providedWire Diameter Range0.1 - 0.5mm Maximum Travel of Coiling Spindle35mm (Spring Length Approx.) Maximum Diameter of Coiling MandrelApprox. 5mm (Spring Inside Diameter) Electrics3 Phase 220V 60Hz

Ivyland, PA
View Listing

US Baird #00 Fourslide

$RFQ

No description providedMaximum Wire Diameter.020" - .080" Standard Width Coil Stock7/16" Maximum Feed Length4-1/4" Operating Speed100 - 500 RPM Approx. Floor Size50" X 34" X 54" Approx. Weight1,250 lbs

Ivyland, PA
View Listing

Tru-Tek 18 Stand Roll Forming Line

$RFQ

Make: Tru-Tek, Model: 20-26R, New in 2007, Left to Right, 18 Stands, 12″ Roll Space, 10″ Horizontal Center, 5″-7″ Vertical Center, 20:1 Ratio, 3.75″ Shaft Key, 30HP Motor. Mandrel Uncoiler, Coil Straightener, Pre-Punchin

West Bloomfield, MI
View Listing

US Baird Model #1 Four Slide

$RFQ

No description providedDiameter3/32" Strip Width3/4" Standard Feed Length6-3/8" Motor1 HP

Ivyland, PA
View Listing

1/16" Nilson 1B Oscillating Wire Straightener

$RFQ

No description providedWire Diameter Range,020" - .050" Maximum Oscillation4" Number of Blocks10 Motor1 HP Single Oscillating Arbor

Ivyland, PA
View Listing

1/16" Nilson 1B Oscillating Wire Straightener

$RFQ

No description providedWire Diameter Range.020" - .050" Maximum Oscillation4" Number of Blocks10 Motor1 HP Single Oscillating Arbor

Ivyland, PA
View Listing

1-1/4" Manville Flat Die Model 1000-C Hand Feed Thread Roller

$RFQ

No description providedMaximum Thread Diameter1-1/4" Depth of Die Pockets6-1/8" Strokes Per MinuteApprox. 40 Length of Moving Die20" Length of Stationary Die19" Distance Between Top of Die Block & Bottom of Tie Rod8-

Maximum workpiece diameter: 1.25"
Maximum workpiece diameter: 1.25"

Ivyland, PA
View Listing

1/8" Shuster 18SFT Dual Arbor Wire Straightener

$RFQ

No description providedHigh Tensile Capacity.030" - .080" Mild Steel Capacitiy.040" - .135" Speed Range25 - 150 FPM Electrics240V With Allen Bradley Powerflex 4 Drives

Ivyland, PA
View Listing

3/16" Shuster 32SF1 Dual Arbor Wire Straightener

$RFQ

No description providedWire Range.062" - .187" Speed Range25 to 200 FPM With Allen Bradley Power Flex 4 Drives, Dual Arbor, & on Casters

Ivyland, PA
View Listing

Kwickway surface grinder

$1,000

Kwickway 855-5 Resurfaces flywheels and cylinder heads. Decks engine blocks. Used 2 years, in storage for 25.

Plainwell, MI
View Listing

Kwickway shot blast machine

$2,000

Kwickway shat blast machine with vacuum system. Use for two years then in storage for25 years.

Plainwell, MI
View Listing

2010 Mazak QTN 450-II

$11,000

Specifications Chuck Size 18" 3 Jaw Air Chk Maximum Swing 33.26" Maximum Cutting Diameter/Shaftwork 22.83" / 18.25" Center Distance 43.55" Maximum Bar Capacity 7.23" X-Axis Travel 13.3

HARTLEPOOL,
View Listing

2011 MAZAK QTN-350-II M

$13,000

MAX SIWING ........................... 29.5" SWING OVER CARRIAGE .................. 20.87" MAX. MACHINING DIAMETER .............. 16.54" MAX. MACHINING LENGTH ................ 60.71" BAR WORK CAPA

Swing: 29.5"

HARTLEPOOL,
View Listing

2008 MAZAK NEXUS QTN-100 II

$8,000

MAXIMUM SWING........................... 21.65" SWING OVER CARRIAGE..................... 11" MAX MACHINING DIAMETER.................. 11" MAX MACHINING LENGTH.................... 11.2" BAR WORK CA

Swing: 21.65"

HARTLEPOOL,
View Listing

2012 DOOSAN-PUMA 400MB

$26,000

Specifications Maximum Swing: 24" Maximum Turning Diameter: 14.75" Maximum Turning Length: 21.7" Hole in Spindle: 2.5" Bar Capacity: 3" (3.15" Hole) Maximum Spindle Speed: 4,000 RPM T

Swing: 24"

HARTLEPOOL,
View Listing

2012 MORI SEIKI NLX2500 SY/700

$35,000

TECHNICAL DETAILS - Number of spindles : 2 - Number of turrets : 1 - Number of axes : 6 MAIN SPINDLE - Spindle nose : A2-8 - Max. bar diameter : 80 [mm] - Spindle power : 18,5 [kW] - Spindle speeds : 4.000 [rpm]

Swing: 12"
Centers: 12"

HARTLEPOOL,
View Listing

2008 HAAS VF-9/50 VERTICAL MACHINING CENTER

$8,400

TABLE SIZE .................... 36" X 84" MAX WEIGHT ON TABLE ........... 4000 LBS X-AXIS TRAVEL ................. 84" Y-AXIS TRAVEL ................. 40" Z-AXIS TRVAEL ................. 30"

X axis: 84"
Y axis: 40"

HARTLEPOOL,
View Listing

2.75″ CUSTOM Flying Cut Off Saw

$RFQ

Max Part Dimensions: 2.75" x 2.75" Blade Dia: 10" Travel: 2′ 10" Direction: Right-Left EQUIPPED WITH: 12′ Dump Table with Target (pneumatic operation) 1/3 HP Motor 240/3/60 Electrical Controls Push Buttons D

Perrysburg, OH
View Listing

2010 DOOSAN-PUMA 300LC

$11,900

SWING OVER BED ....................... 23.2" SWING OVER CARRIAGE .................. 17.7" DISTANCE BETWEEN CENTERS ............. 52.8" MAX. TURNING DIAMETER ................ 15.7" MAX. TURNING LEN

HARTLEPOOL,
View Listing

2008 HAAS VF-3SS Four-Axis CNC VMC

$9,900

Table working surface 18" x 48" Table travel, X-axis (longitudinal) 40" Table travel, Y-axis (cross) 20" Vertical column travel (Z-axis) 25" Minimum/Maximum distance, spindle nose

X axis: 40"
Y axis: 20"

HARTLEPOOL,
View Listing

2010 DOOSAN LYNX 220LMA

$15,000

SPECIFICATIONS: Chuck Size............................................... 6" Max Diameter Bar Capacity...................... 2" Max Swing Over Bed / Carriage............... 23.2" / 6.7" Max T

Swing: 24"
Centers: 10"

HARTLEPOOL,
View Listing

2007 HAAS VF-2B VERTICAL MACHINING CENTER

$7,500

HAAS VF-2B 3-AXIS VMC Specifications: Table size ...................... 36" X 14" Max Table load .................. 3,000 lBS x Travel ........................ 30" Y Travel ........................

X axis: 30"
Y axis: 16"

HARTLEPOOL,
View Listing

2010 MAZAK QUICK TURN NEXUS 200-II

$10,900

Specifications: MAXIMUM SWING.......................... 24.02" SWING OVER CARRIAGE.................... 13.78" MAXIMUM MACHINING LENGTH............... 20.16" SPINDLE BORE / BAR WORK CAPACITY....... 3&qu

Swing: 24.02"

HARTLEPOOL,
View Listing

HAAS SL-20T CNC LATHE

$18,950

CHIP AUGER, TAILSTOCK, RIGID TAPPING, FLOPPY DISK

THOUSAND OAKS, CA
View Listing

HAAS SL-30T CNC LATHE

$19,950

CHIP CONVEYOR, FLOPPY DISK, RIGID TAPPING

THOUSAND OAKS, CA
View Listing

10" TSUDAKOMA HORIZ/VERT CNC ROTARY TABLE Model: RNCM-251L, New 1994

$RFQ

10" TSUDAKOMA HORIZ/VERT CNC ROTARY TABLE Model: RNCM-251L, New 1994, S/N 9400088 Stock# K14300 TABLE DESCRIPTION: This Horizontal or Vertical Mount CNC Rotary Table was Designed for Full Contour Milling

Diameter or width: 9.84"

Cincinnati, OH
View Listing

25" X 80" TOOLMEX ( WAFUM ) ENGINE LATHE, MODEL TUR630M

$RFQ

25" X 80" TOOLMEX ( WAFUM ) ENGINE LATHE MODEL TUR630M S/N 48485 NEW 1990 SWING OVER BED ------------------------------- 24.8" SWING OVER CROSS SLIDE ------

Swing: 25"
Centers: 80"

Des Plaines, IL
View Listing

CURRENT CT-300 FAST HOLE EDM

$24,500

24 ATC, EBBCO FILTRATION SYSTEM, 24 ELECTRODE HOLDERS, PICKUP SEQUENCER, SUBMERGED. X-12" Y-8" Z-16" W-10" UNDER POWER & RUNNING

X axis travel: 12"
Y axis travel: 8"

THOUSAND OAKS, CA
View Listing

MONARCH 10EE TOOL ROOM LATHE

$5,950

ASSORTED TOOLING & 2 CHUCKS, 440VOLTS

Swing: 12.5"
Centers: 20"

THOUSAND OAKS, CA
View Listing

HANKOOK NSD MAX SD-75-76 EDM

$23,950

5 KVA, X-25.6" Y-17.7" (LOW HOURS) 220V/3PH/60AMP

THOUSAND OAKS, CA
View Listing

DOOSAN DAEWOO LYNX 220LC CNC LATHE

$25,500

FANUC Oi-TC CONTROL, 4000 RPM, 8" CHUCK, 2.5' SPINDLE HOLE

THOUSAND OAKS, CA
View Listing

Stainless Steel Belt Sander In Good Condition

$34,955

Timesavers International, B.V. MODEL 252-3-CMW, S/N 23109 Manufactured 1994: 52” WIDE Belt Size: 52” W X 75” L Bed Opening: 0 – 8” Speeds approximately: 15 – 45 FPM Motor: 30 HP, 1746 RPM. 440V Weight appr

Kansas City, MO
View Listing

CLAUSING COLCHESTER STORM A50 CNC LATHE

$15,950

FANUC 21i-T CONTROL, 6-5/8" CHUCK, STORM MBF 1000 BARFEEDER, 14 TOOL HOLDERS, 12 STATION TURRET, SUPER CLEAN MACHINE, UNDER POWER & RUNNING

THOUSAND OAKS, CA
View Listing

6000 LB. DURANT HD-672-U PLAIN COILING REEL

$RFQ

6000 LB. DURANT HD-672-U HEAVY DUTY PLAIN UNCOILING REEL New 2001 EQUIPPED WITH:  Drag Brake, Hydraulic Expansion, Hold Down Arm, SPECIF

Bannockburn, IL
View Listing

2009 Golden Sun TMU 5-Axis CNC Trunion Table

$8,500

Specifications: Platter Diameter ................................................................ 8" Max Weight on Platter ................................................ 200 lbs Part Swing (max) ...............

Work surface diameter: 8"

Schaumburg, IL
View Listing

9” x 42” Millport Vertical Turret Miller, Model: 2 SN: 810522

$3,250

9” x 42” Millport Vertical Turret Miller, Model: 2 SN: 810522 Specifications: Table: 9” x 42” Variable speeds: 60-4250 Manual Lub, R-8 Spindle Servo Power Table Feed Equipped With: Condition: Go

Rochester, NY
View Listing

Alliant Model #RT-2 Vertical Milling Machine, Variable Speed, 9” x 42”

$7,200

Alliant Model #RT-2 Vertical Milling Machine, Variable Speed, 9” x 42” table SN :760679472 Specifications: Variable speed: 60- 4500 Tool Holder Coolant Kurt Style Vise New DRO New Power Table Feed R-8 Spind

Rochester, NY
View Listing

Pexto 36” x 22” Gage, Power Sheet Rolls, Model: 381 SN: J1851

$1,850

Pexto 36” x 22” Gage, Power Sheet Rolls, Model: 381 SN: J1851 Specifications: Roller machined for round bars up to 3/8” diameter Volt: 220, Hp: 1/3 Equipped With: Braking Caster frame for easy moving Con

Rochester, NY
View Listing

KO Lee 6” X 12” Manual Surface Grinder, Parts #S714 SN: 16817 GA

$2,200

KO Lee 6” X 12” Manual Surface Grinder, Parts #S714 SN: 16817 GA Specifications: Walker Ceramax Mag. Chuck Volt: 230\460, Ph 3, RPM: 3450 1 Horse Power Spindle Motor Equipped With: Condition: Good C

Rochester, NY
View Listing

Arboga Maskiner Drill Press, Type: GM 3508 SN: 151850

$1,850

Arboga Maskiner Drill Press, Type: GM 3508 SN: 151850 Specifications: Volt: 220, Ph: 3, Cycle: 60, Hp: 3.0/2.0, AMP: 8.0/6.0 3 Horse (approx.) Spindle Speed 50, 130, 175, 460 6” Sindle Travel 4 Morse Taper Spi

Rochester, NY
View Listing

Blower Dust Collector, SECO- M-UFO-102B SN: 00181

$1,200

Blower Dust Collector, SECO- M-UFO-102B SN: 00181 Specifications: Horse Power: 3’Volt: 220/440 Ph: 3 Equipped With: Condition: Good Can be demonstrated under power. Price: F.O.B. Rochester ”

Rochester, NY
View Listing

Simpson, Model: 83, Eyelet & Grommet Attaching Machine SN: 1213

$2,650

Simpson, Model: 83, Eyelet & Grommet Attaching Machine SN: 1213 Specifications: 50-60 Air Pressure PSI Volt: 115 Equipped With: Condition: Good Can be demonstrated under power. Price: F.

Rochester, NY
View Listing

Hardinge DV-59, SN: DV-59-11587

$6,400

Hardinge DV-59, SN: DV-59-11587 Specifications: Variable speed XY tool compound Tailstock Equipped With: 52 5C collets 5 face plates 5” 3-jaw chuck 5” 4-jaw chuck 7 oversized collets Preci

Rochester, NY
View Listing

MITSUI SEIKI VS-5A

$19,500

FANUC 11M, TSUDAKOMA FULL 4TH AXIS 12" ROTARY TABLE, 50 TAPER, GLASS SCALES, 20 HP, CHIP CONVEYOR, 4500 RPM, UNDER POWER & RUNNING

X axis: 42.5"
Y axis: 24"

THOUSAND OAKS, CA
View Listing

MORI SEIKI MV-65

$29,500

TSUDAKOMA 4TH & 5TH AXIS ROTARY TABLE, FANUC 11M, 30 ATC, CAT-50 TAPER, ASSORTED TOOLING, 15 HP, 6000 RPM, UNDER POWER & RUNNING

X axis: 60"
Y axis: 25.6"

THOUSAND OAKS, CA
View Listing

Used Clausing Model 1632 4 Spindle Drill Press 15 inch

$1,200

4 spindle--- 3 Model #1632 Drilling 1725 RPM 400/5400 RPM 1 Model # 1654 Tapping 1140 RPM 260/3600 RPM Single Phase Unit Production Table Call for more info.

# Spindles: #4

Northwood, OH
View Listing

BUTLER-ELGAMILL #T BED TYPE UNIVERSAL HEAD VERTICAL MILL

$RFQ

BUTLER-ELGAMILL #T BED TYPE UNIVERSAL HEAD VERTICAL MILL MODEL T S/N 0027810/A NEW 1975 TABLE SIZE -------------------------------------- 29.5" X 8

Table width: 29.5"
Table length: 84.5"

Des Plaines, IL
View Listing

Tru Turn 80.31" x 236" Manual Lathe, Brand New

$RFQ

Reference #25249 Tru Turn 80.31" x 236" Manual Lathe, Brand New Model: Heavy Duty CAPACITY: Swing Over Bed ....................... 80.31" Swing Over Cross Slide ............... 64.96" Widt

Swing: 80.31"
Centers: 236.22"

Melville, NY
View Listing

NEW CLAUSING # 2274 20" VARIABLE SPEED FLOOR DRILL PRESS

$4,770

NEW CLAUSING # 2274 20" VARIABLE SPEED FLOOR DRILL PRESS Make: CLAUSING Model #: 2274 Condition: NEW All specifications are approximations, and are subject to verification. Standard Features 3-Phase 300

Chino, CA
View Listing

FADAL VMC 8030

$38,600

UNDER POWER & RUNNING, ONLY 1555 CUTTING HOURS, 10,000 RPM

X axis: 80"
Y axis: 30"

THOUSAND OAKS, CA
View Listing

BROWN& SHARPE ORYZO CMM

$29,500

DRO,X-157, Y-144, Z-144

X axis measuring range: 144"
Y axis measuring range: 144"

THOUSAND OAKS, CA
View Listing

MORI SEIKI MV-JUNIOR CNC VMC

$16,200

MORI SEIKI MV-JUNIOR CNC VMC Make: Mori Seiki Model #: MV-Junior Year: 1993 Serial #: 4030 Condition: Very Good All specifications are approximations, and are subject to verification. ““This One Owner machin

X axis: 22"
Y axis: 16.1"

Chino, CA
View Listing

SHEFFIELD MICRO-FORM GRINDER

$9,950

SONY DRO, ASSORTED WHEEL HUBS, VORTEC DUST COLLECTOR

THOUSAND OAKS, CA
View Listing

100 TON ALKANO LTD. HEAVY DUTY HYDRAULIC H FRAME PRESS

$RFQ

100 TON ALKANO LTD. HEAVY DUTY HYDRAULIC H FRAME PRESS MODEL H010 S/N 0012 CAPACITY ------------------------------------ 100 TONS RAM DIAMETER ------------------------------

Tonnage: 100T
Stroke: 16"

Des Plaines, IL
View Listing

SUPERMAX YCM-12 9X50 CNC VERTICAL MILLING

$5,400

SUPERMAX YCM-12 9X50 CNC VERTICAL MILLING Make: SUPERMAX Model #: YCM-12 Condition: Used SUPERMAX YCM-12 9X50 Features: Anilam Crusader 3 Axis CNC Control SUPERMAX YCM-12 9X50 Specifications: Table:

Chino, CA
View Listing

Craven 127" x 360" Heavy Duty 4-Axis CNC Lathe

$RFQ

Reference #28376 Craven 127" x 360" Heavy Duty 4-Axis CNC Lathe FEATURES: Fanuc 0i-TC CNC Control (Retrofitted 2010) 4-Way Bed Construction 2-Carriages 20.5" Head & Tailstock Risers New Ro

Swing: 127"
Centers: 360"

Melville, NY
View Listing

2006 JOHN DEERE 700J XLT DOZER

$64,500

6 CYL JD ENGINE, HYDRO-STATIC TRANS W/ JOYSTICK STEERING, 22 IN PADS, 6-WAY BLADE (10 FT 1 IN WIDE), ENCLOSED CAB W/ A/C & HEAT, 7731 HRS SHOWING

Sutherlin, VA
View Listing

20 TON TRUMPF TRUPUNCH 3000 CNC ELECTRIC PUNCHING MACHINE 50" X 100&qu

$RFQ

20 TON TRUMPF TRUPUNCH 3000 CNC ELECTRIC PUNCHING MACHINE 50" X 100", MFG:2011

Tonnage: 20T

NEW CITY, NY
View Listing

50 TON METAL MUNCHER HYDRAULIC PRESS, MODEL GB50

$RFQ

50 TON METAL MUNCHER HYDRAULIC PRESS MODEL GB50 S/N 21151088 NEW 1988 THROAT DEPTH ---------------------------------- 9" OPENING IN BED -------------------------------- 4-1/

Tonnage: 50T
Stroke: 10"

Des Plaines, IL
View Listing

HYUNDAI L300A CNC LATHE

$89,500

FANUC CNC CONTROL, 10" CHUCK, TOOLING, 3500 RPM, 30 HP, LESS THEN 400 HOURS, CHIP CONVEYOR

THOUSAND OAKS, CA
View Listing

K O LEE SURFACE GRINDER

$1,450

6" X 18"

THOUSAND OAKS, CA
View Listing

LAGUN MODEL FTV-1S RAM TYPE VERTICAL MILL. MODEL FTV-1S

$RFQ

LAGUN MODEL FTV-1S RAM TYPE VERTICAL MILL MODEL FTV-1S S/N SE23989 NEW 1986 TABLE SIZE ------------------------------------- 10" X 44" TABLE TRAVEL ---- ( LONGIT

Table width: 10"
Table length: 44"

Des Plaines, IL
View Listing

Liebherr L 2400 Vertical Gear Hobber

$RFQ

Type L 2400, max. wheel diameter 2500 mm max. module 25 spindle turning speed range 15 - 150 U/min faceplate diameter 1500 mm total power requirement 60 kW weight of the machine ca. 37 t

Wolbrom,
View Listing

TREE VMC-1050

$6,950

40X20X22, 24 ATC, 15 HP, 8000 RPM, YASNAC CNC CONTROL, UNDER POWER, ORIGINAL OWNER

X axis: 40"
Y axis: 20"

THOUSAND OAKS, CA
View Listing

2000 CHEVALIER MODEL FM-3VS VERTICAL MILL, 9” X 48”

$RFQ

SPECIFICATIONS TABLE SIZE: 9” X 48” T-SLOT NUMBER & SIZE: 3 AND 5/8” WORK PIECE WEIGHT: 750 LBS TRAVELS X-AXIS: 30” Y-AXIS: 12” Z-AXIS: 16” RAM TRAVEL: 12” SPINDLE TAPER: R-8 SPEEDS (VARIABLE)

Table width: 48"
Table length: 9"

Bethlehem, PA
View Listing

3/16" Hartford A-190-M #0 Hand Feed Flat Die Thread Roller

$RFQ

No description providedThread Length Capacity1/8" to 1-1/2" Screw Diameter Capacity#0 thru #10 Die Pocket Depth1-5/8" Maximum Speed175 PPM Motor3 HP Approx. Floor Size4' x 5' Approx. Weight1,600 lbs

Maximum workpiece diameter: 1.5"
Maximum thread length: 1.5"

Ivyland, PA
View Listing

3/16" Hartford A-190-HM #0 Hand Feed Flat Die Thread Roller

$RFQ

No description providedThread Length Capacity1/8" to 1-1/2" Screw Diameter Capacity#0 thru #10 Motor3 HP Maximum Speed175 PPM Approx. Floor Size4' x 5' Approx. Weight1,600 lbs

Maximum workpiece diameter: 1.5"
Maximum thread length: 1.5"

Ivyland, PA
View Listing

3/16" Hartford A-190-M #0 Hand Feed Flat Die Thread Roller

$RFQ

No description providedScrew Diameter Capacity#0 thru #10 Thread Length Capacity1/8" to 1-1/2" Die Pocket Depth1-5/8" Maximum Speed Range175 PPM Motor3 HP Approx. Weight1,600 lbs Approx. Floor Size4' x 5'

Maximum workpiece diameter: 1.5"
Maximum thread length: 1.5"

Ivyland, PA
View Listing

Dexter 4 Stand Roll Former

$RFQ

Dexter 4 Stand Roll Former S/N: R-3111, Stock No: 17957 Diameter Shafts: 2.125" Roll Space: 5" Horizontal Centers: 9" Vertical Adjustment: 2" Currently Tooled for 15" Corvette Wheel Trim

# Stands: #4
Roll diameter: 2.125"

Nashville, TN
View Listing

HAITIAN INJECTION MOLDING PRESS

$89,500

259 TON, 11 OZ, SIGMATEK CNC CONTROL, 36.6" X 34.6" PLATEN,MADE IN KOREA

Clamping force: 259T
Shot size: 11Oz

THOUSAND OAKS, CA
View Listing

Sendzimir ZR 23-37 Reversing Cold Rolling Mill

$RFQ

Make: Sendzimir Model: ZR-23-37 Material Type: Stainless Steel, High Carbon, Brass Mill Direction: Reversing Material Width: 18.5" (470mm) - 37" (940mm) Coil ID: 20" (508mm) - 24" (610mm) Co

West Bloomfield, MI
View Listing

42" X 48" X 264 FUTURMILL/INGERSOLL DOUBLE HOUSING PLANER MILL

$RFQ

42" X 48" X 264 FUTURMILL/INGERSOLL DOUBLE HOUSING PLANER MILL FUTURMILL CONVERSION OF INGERSOLL MACHINE, INCLUDING MILLING HEADS, DRIVES, ELECTRICS & CONTROLS

Distance between houses: 52"

Des Plaines, IL
View Listing

Amada RG 50

$24,000

QUOTATION ONE (1) Re-Manufactured U.S. AMADA RG 50 PRESS BRAKE WITH NC9EX TECHNICAL DATA: Maximum Tonnage 55 Ton Maximum Bending Length 82.1” Maximum Stroke Length 3.94” Open Height 1

Tonnage: 55T

Valparaiso, IN
View Listing

Amada Coma 567

$RFQ

ONE (1) Used U.S. AMADA C.N.C. TURRET PUNCH 55 TON MODEL COMA 50-60-72 44 STATION AUTO INDEX • Max. Punching Force 55 U.S. Tons • Accuracy Punching w/No Repositioning Excellent • Sheet Size 60” x 72”

Tonnage: 55T

Valparaiso, IN
View Listing

Accupress 713010 Year 2002

$RFQ

Used Accurpress Hydraulic Press Brake Model No 713010 Capacity………………………………………………………………… 130 Ton Bending Length…………………………………………………………. 10’ Feet Year Mfg…………………………………………………………………2002 ETS 3000 Control

Tonnage: 130T

Valparaiso, IN
View Listing

Amada Vipros 255 Year 2001 (3) Auto index

$49,000

Quotation One Used Amada Vipros 255 31 Station 3 (Three) Auto index Year 2001 Specifications: Capacity................................................................. 22 Ton Sheet Size..........................

Tonnage: 22T

Valparaiso, IN
View Listing

buy & sell, new & used machinery, machine tools & equipment

Machines currently for sale: