buy & sell, new & used machinery, machine tools & equipment

<Prev | 81 | 82 | 83 | 84 | 85 | 86 | 87 | 88 | 89 | 90 | Next>
Refine: Viewing 1621 - 1640 of 21128 matches
Sort by:
Items Per Page:  20  |  50 |  100
Sertom EMO 31-60 2.75" x 10'' 3-Roll Hydraulic Variable Axis
$RFQ
Sertom EMO 31-60 2.75" x 10'' 3-Roll Hydraulic Variable Axis
Reference #32933 Sertom EMO 31-60 2.75" x 10'' 3-Roll Hydraulic Variable Axis Bending Roll FEATURES: Siemens Simatic Multi Panel PLC Control Console 3-Roll Variable Axis Design Overhead Plate Support
  • Thickness: 2.75"
    BIRMINGHAM VH-1010-6 10ft x 10ga. Hydraulic Box and Pan Brake
    $22,750
    BIRMINGHAM VH-1010-6 10ft x 10ga. Hydraulic Box and Pan Brake
    CALL 386-304-3720 FOR AVAILABILITY ***Special Promotion - Only 1 In Stock at This Price*** Please verify In Stock BEFORE Ordering Prices Valid on In Stock Machines Only Call for Freight FEATURES: Bending angle
    • Maximum bending capacity: 0.134"
    • Bending length: 120"
      Circ Saw 7-1/4" Worm-drv Skil
      $199
      Circ Saw 7-1/4" Worm-drv Skil
      Circ Saw 7-1/4" Worm-drv Skil Model: 77 [Skil] S/N: HC108819 7-1/4" Worm Gear Circular Saw 13Amp; 1Ph; 120Volt
      2021 Maripak L-Bar Sealer & Heat Tunnel RTR#4073346-01
      $5,000
      2021 Maripak L-Bar Sealer & Heat Tunnel RTR#4073346-01
      Equipment located in Raleigh, NC. 2021 Maripak - LMC Series Semi-Automatic - L-Bar Sealer Model: 80/65 v2, 220v, S/N: 17600, With 2021 Maripak T60-1400 H400 Diamond Heat Tunnel, 220v, S/N: 17299 All equipment is sold “
      PRIMELINE M1010 10ft x 10ga. Electro-Mechanical Power Shear
      $37,995
      PRIMELINE M1010 10ft x 10ga. Electro-Mechanical Power Shear
      CALL 386-304-3720 FOR AVAILABILITY IN STOCK NOW! FEATURES: Mechanical Power Squaring Shear with Manual Front-Operated Backgauge, Pneumatic Sheet Support Device with Front Return and Material Cart Go-To
      Grob G552 CNC Horizontal Machining System (3) Machines, Fanuc Robots, 12K RPM, HSK-63, 120
      $RFQ
      Grob G552 CNC Horizontal Machining System (3) Machines, Fanuc Robots, 12K RPM, HSK-63, 120
      CNC Control yes Type of CNC Control Siem
      POREBA TCG-160-10M Lathe
      $109,000
      POREBA TCG-160-10M Lathe
      Swing over bed: 90" Between centers: 32' Spindle bore: 4" Threads: Std Tailstock spindle taper: Yes Chuck: 5' Dimensions: 94" x 600" x 102"
      • Swing: 90"
        POLLUTION CONTROL BURN OFF OVEN 72"W 74"L 75"H
        $RFQ
        POLLUTION CONTROL BURN OFF OVEN 72"W 74"L 75"H
        DOUBLE DOOR OPENING WITH PRESSURE RELIEF ROOF PANEL. PRIMARY HEAT AND AFTER BURNER HEAT ARE SUPPLIED BY PACKAGE BURNERS FIRING INTO HEAT TUBES IN REAR OF WORK CHAMBER. INTERIOR WALLS, ROOF AND DOORS ARE LINED WITH LIGHT
        WISCONSIN 1050 F ELECTRIC OVEN 8'W 8'L 5'H
        $RFQ
        WISCONSIN 1050 F ELECTRIC OVEN 8'W 8'L 5'H
        AIR OPERATED VERTICAL LIFT FRONT DOOR. CIRCULATING FAN (15 HP, 15,000 CFM) AND HEATING ELEMENTS ARE MOUNTED IN A PROTECTED CHAMBER ABOVE WORK AREA. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON SIDE AND REAR WALLS RETU
        • Chamber width: 96"
        • Chamber length: 96"
          ACE BURN OFF OVEN 36"W 36"L 47"H
          $RFQ
          ACE BURN OFF OVEN 36"W 36"L 47"H
          ARE LINED WITH LIGHT WEIGHT REFRACTORY COVERED BY EXPANDED METAL. FLOOR IS A POURED CASTABLE REFRACTORY. HEAT FOR PRIMARY HEAT AND AFTERBURNER HEAT IS SUPPLIED BY (2) PACKAGE BURNERS FIRING FROM THE RIGHT SIDE INTO THE
          GLOBAL FINISHING UNUSED 500 F WALK IN OVEN 10'W 22'L 9'H
          $RFQ
          GLOBAL FINISHING UNUSED 500 F WALK IN OVEN 10'W 22'L 9'H
          UNUSED CLASS A OVEN MANUFACTURED IN 2021, NEVER INSTALLED. DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES AT BOTH FRONT AND REAR. REMOVABLE ROOF MOUNTED COMBUSTION CHAMBER WITH GAS BURNER (2,000,000 BTU/HR MAX) AND 10
          • Chamber width: 120"
          • Chamber length: 264"
            HURRICANE SYSTEMS (MIDBROOK) 24"W BELT WASHER
            $RFQ
            HURRICANE SYSTEMS (MIDBROOK) 24"W BELT WASHER
            ALL STAINLESS STEEL CONSTRUCTION WITH 24"WIDE VARIABLE SPEED FLAT WIRE BELT. PARTS ARE LOADED ON BELT IN THE OPEN LOAD AREA TRAVEL THROUGH APPROX 3' WASH, 2' TRANSITION ZONE, 2' RINSE, 2' TRANSITION
            DESPATCH 500 F GAS WALK IN OVEN 6'W 10' 6.5'H
            $RFQ
            DESPATCH 500 F GAS WALK IN OVEN 6'W 10' 6.5'H
            DOUBLE DOOR OPENING WITH VIEWING WINDOW AT BOTH FRONT AND REAR. HEAT (500,000 BTU) IS SUPPLIED BY A PACKAGE BURNER FIRING INTO A REMOVABLE ROOF MOUNTED CHAMBER. HEATED AIR, WHICH IS CIRCULATED BY A BELT DRIVEN FAN, ENTER
            • Chamber width: 72"
            • Chamber length: 120"
              DESPATCH 1000 F ELEC. OVEN 47"W 30"L 42"H
              $RFQ
              DESPATCH 1000 F ELEC. OVEN 47"W 30"L 42"H
              DOUBLE DOOR OPENING WITH POSITIVE LATCHING AND STAINLESS STEEL INTERIOR. HEATING ELEMENTS AND CIRCULATING FAN ARE MOUNTED BELOW WORK AREA IN A PROTECTED CHAMBER. HEATED AIR IS CIRCULATED HORIZONTALLY. (14) SHELVES ARE
              • Chamber width: 47"
              • Chamber length: 30"
                Budgit 3 Ton Electric Chain Hoist
                $RFQ
                Budgit 3 Ton Electric Chain Hoist
                Budgit 3 Ton Electric Chain Hoist S/N: 198573, Stock No: 020073 Model: 113458-13 Capacity: 3 Ton Lift: 10’ Pushbutton Pendant Manual Trolly Electrics: 240/480V (Currently Wired 240V), 3 Phase
                • Lifting capacity: 3T
                • Lift height: 10'
                  2007 Daewoo Lynx 200 2-Axis CNC Lathe
                  $RFQ
                  2007 Daewoo Lynx 200 2-Axis CNC Lathe
                  2007 Daewoo Lynx 200 2-Axis CNC Lathe SPECIFICATIONS: SWING 18.11" CHUCK SIZE 8" BAR CAPACITY 1.5" POWER 10 hp MAX RPM 5,000 RPM TURNING DIA 11.02" TAILSTOCK
                  CHIRON FZ-12W HIGH SPEED CNC VERTICAL MACHINING CENTER 1998
                  $RFQ
                  CHIRON FZ-12W HIGH SPEED CNC VERTICAL MACHINING CENTER 1998
                  CHIRON FZ-12W HIGH SPEED CNC VERTICAL MACHINING CENTER 1998 2 Machines Available…. S/N 469-94 GE Fanuc 21M Control Specifications Axis X 550 mm Axis Y 300 mm Axis Z 425 mm Rotary table (4th axis) n
                  Allis-Chalmers 7500 Pound Forklift
                  $RFQ
                  Allis-Chalmers 7500 Pound Forklift
                  Allis Chalmers 7500 Pound Forklift with Side Shift ***EXCELLENT CONDITION*** Rebuilt Tilt Cylinders New Brakes Hydraulics Serviced Many Seals Have Been Replaced No Leaks Runs Excellent.
                  • Lifting capacity: 6500T
                    HIGH SPEED CELL LINES FOR D SIZE (R20) & AA SIZE (R6) BATTERIES (14379)
                    $RFQ
                    HIGH SPEED CELL LINES FOR D SIZE (R20) & AA SIZE (R6) BATTERIES (14379)
                    HIGH SPEED CELL LINESStock # 14379High Speed Cell Lines &ndash; overviewThe High Speed Celll Lines (HSCL) consist of two production lines. These production lines were designed to manufacture Zinc Chloride cellsin the
                    2000mm x 3.2mm x 60,000# Bronx High Speed Cut-To-Length Line (14371)
                    $RFQ
                    2000mm x 3.2mm x 60,000# Bronx High Speed Cut-To-Length Line (14371)
                    Max Weight 60000 pounds Max Coil Width Capacity
                    Categories:
                    Condition:
                    Manufacturer:
                    Location:
                    Price:
                    •  to 
                    <Prev | 81 | 82 | 83 | 84 | 85 | 86 | 87 | 88 | 89 | 90 | Next>