buy & sell, new & used machinery, machine tools & equipment

<Prev | 391 | 392 | 393 | 394 | 395 | 396 | 397 | 398 | 399 | 400 | Next>
Refine: Viewing 7901 - 7920 of 19759 matches
Sort by:
Items Per Page:  20  |  50 |  100
2006 Caterpillar D6N XL w/ 3rd Valve & Cab w/ A/C & Heat - E7223
$61,500
2006 Caterpillar D6N XL w/ 3rd Valve & Cab w/ A/C & Heat - E7223
6 CYL CAT ENGINE, 3 SPD TRANS W/ DIFF STEERING, 24 IN PADS, 6-WAY BLADE, 3RD VALVE, ENCLOSED CAB W A/C & HEAT
Used Rockwell 6" Jointer, Model 37-200
$1,100
Used Rockwell 6" Jointer, Model 37-200
Used Rockwell 6" Jointer, Model 37-200. SN 300454, 3/4 HP, 115 VOLT. Factory original Retractable Casters.
Used Delta 18" Radial Arm Saw, Model 33-062
$5,975
Used Delta 18" Radial Arm Saw, Model 33-062
Used Delta 18" Radial Arm Saw, Model 33-062. 7.5 HP, 230/460 Volt (wired 230V) 3PH. Factory Origninal Electronic Brake. SN 91L72414
Everett Cut Off Saw
$RFQ
Everett Cut Off Saw
No description providedElectrics208-230/460 Volt / 3 Phase Motor3 HP With Stand<br />Non - Miter
3/16" National 4 Die Parts Former
$RFQ
3/16" National 4 Die Parts Former
No description providedElectrics220 / 440V /10 HP / 850 RPM / 60 CYCLE - NEW SEALTITE Production100 PPM Maximum Kickout1-1/2" Minimum Kickout3/8" Minimum Cutoff Length3/8" Maximum Cutoff Length2-1/2"
19.685" W or Dia Tsudakoma RBA-500R 4th AXIS CNC ROTARY TABLE, Fanuc ,Hydraulic Clamp
$RFQ
19.685" W or Dia Tsudakoma RBA-500R 4th AXIS CNC ROTARY TABLE, Fanuc ,Hydraulic Clamp
  TSUDAKOMA CNC ROTARY TABLE MODEL: RBA-500R, S/N: 110071,  NEW: 2014   TABLE DIAMETER .......................... 19.685" (500mm) CENTER HEIGHT ........................... 12.20" (310 mm) C
7" Ajax Fully Automated Upset Forging Cell Re:24888
$RFQ
7" Ajax Fully Automated Upset Forging Cell Re:24888
Dia 7 " Manufacturer Ajax Forge Tons 1,500 tons Grip Open 9.5 " Stroke 20 " SPM 25 Grip Tons 995 tons Ref #: 24888 Gather 13 " Hold 5.5 " Die space length 28 "
  • Maximum diameter: 7"
    2" Hill Acme XN Upsetters w/Mag Feeders/Hyd Clamping Re:25485/86/88
    $RFQ
    2" Hill Acme XN Upsetters w/Mag Feeders/Hyd Clamping Re:25485/86/88
    Dia 2 " Manufacturer Hill Acme w/Magazine Feeder Forge Tons 390 tons Grip Open 3.5 " Stroke 9 " SPM 55 Grip Tons 200 tons Ref #: 25486 Gather 6 " Hold 1.8 " Die spac
    • Maximum diameter: 2"
      2" Hill Acme model XN Upsetter with Magazine Feeder Re:25484 (2) avail
      $RFQ
      2" Hill Acme model XN Upsetter with Magazine Feeder Re:25484 (2) avail
      Dia 2 " Manufacturer Hill Acme w/Magazine Feeder Forge Tons 390 tons Grip Open 3.5 " Stroke 9 " SPM 55 Grip Tons 200 tons Ref #: 25484 Gather 6 " Hold 1.8 " Die spac
      • Maximum diameter: 2"
        1-1/4" Hill Acme model XN Upsetter with Magazine Feeder - Re:25487
        $RFQ
        1-1/4" Hill Acme model XN Upsetter with Magazine Feeder - Re:25487
        Dia 1.2 " Manufacturer Hill Acme w/Magazine Feeder Forge Tons 125 tons Grip Open 2 " Stroke 7 " SPM 75 Grip Tons 70 Ref #: 25487 Gather 3.8 " Hold 1.5 " Die space le
        • Maximum diameter: 1.25"
          72" x .135" x 55,000Lb Alcos - Cincinnati Loop Slitting Line
          $RFQ
          72" x .135" x 55,000Lb Alcos - Cincinnati Loop Slitting Line
          Material Width: 12" - 72" Material Thickness: .010" - .135" Weight Capacity: 55,000Lb Coil ID: 20" - 24" Coil OD: 72" Speed: 1000 feet per minute Direction: Left to Right En
          • Maximum workpiece width: 72"
          • Maximum workpiece thickness: 0.135"
            5,000 Lb. ROTARIAN #R1240 Pallet Uncoiler
            $RFQ
            5,000 Lb. ROTARIAN #R1240 Pallet Uncoiler
            UTUBE NUMBER: 3698 MANUFACTURER: ROTARIAN MODEL NUMBER: R1240 SERIAL NUMBER: NR2051 SPECIFICATIONS: Pallet-Type Horizontal Uncoiler Coil Weight Capacity, Maximum: 5,000 Lbs. Maximum Coil Diameter: 48″ Maximum S
            2,000 Lb. x 12″ LITTELL Single Uncoiler – Parts Only
            $RFQ
            2,000 Lb. x 12″ LITTELL Single Uncoiler – Parts Only
            UTUBE NUMBER: 3700 MANUFACTURER: LITTELL MODEL NUMBER: 20-12 SERIAL NUMBER: 8887-82-4 SPECIFICATIONS: Maximum Coil Weight: 2,000 Lbs. Maximum Coil Width: 12″ Coil I.D. Range: 16″ – 20″ Maximum Coil O.D.: 48″
            Used Mazak 18” x 60” Inch/Metric Gap Bed Engine Lathe
            $13,500
            Used Mazak 18” x 60” Inch/Metric Gap Bed Engine Lathe
            Specifications: Control ........................................... ACU-RITE 2-AXIS DRO Swing Over Bed ................................................... 18-1/8” Swing In Removable Gap ...............................
            • Swing: 18.125"
            • Centers: 60"
              2016 KALAMAZOO MODEL K10SW WET ABRASIVE SAW, 10” WHEEL
              $RFQ
              2016 KALAMAZOO MODEL K10SW WET ABRASIVE SAW, 10” WHEEL
              SPECIFICATIONS SPINDLE SPEED: 2,300 RPM MOTOR: 3 HP SPINDLE ARBOR: 5/8” ABRASIVE WHEEL: 10” GENERAL DIMENSIONS: 36” X 26” X 62” ELECTRICAS: 220 VOLTS, 1 PH WEIGHT: 300 LBS EQUIPPED WITH 10 GALLON
              • Blade diameter: 10"
                2005 TOS MODEL SN710S/4000 UNIVERSAL CENTER GAP BED LATHE, 28" X 160&q
                $RFQ
                2005 TOS MODEL SN710S/4000 UNIVERSAL CENTER GAP BED LATHE, 28" X 160&q
                WORKING CAPACITY SWING OVER BED: 28.3" SWING OVER CROSS SLIDE: 16.9" SWING IN GAP: 37.8" DISTANCE BETWEEN CENTERS: 156.7" MAXIMUM WEIGHT OF WORKPIECE: 3,306 LBS WIDTH OF GAP IN FRONT OF FACEPLAT
                • Swing: 28"
                • Centers: 160"
                  USED TECHNICA MODEL ZSM-150 CENTER HOLE GRINDER, 2” X 43”
                  $RFQ
                  USED TECHNICA MODEL ZSM-150 CENTER HOLE GRINDER, 2” X 43”
                  SPECIFICATIONS CONE ANGLE TO GROUND CENTER HOLES: 60° MAXIMUM DIAMETER OF GROUND CENTER HOLES: 2” MAXIMUM DIAMETER OF WORKPIECE: 5” MAXIMUM WORKPIECE LENGTH: 43” HEADSTOCK AXIS TO COLUMN FACE: 6” GRINDIN
                  • Grinding wheel diameter: 2"
                  • Maximum length: 43"
                    16 Stand x 2.5″ x 24″ BRADBURY Rollformer, $44,000!
                    $44,000
                    16 Stand x 2.5″ x 24″ BRADBURY Rollformer, $44,000!
                    Stock #2709 Model #315-B Serial #32646 Year: 1997 Direction: L-R Stands: 16 Spindle Dia: 2.5" Roll Space: 24" Vertical Adj: 4" – 5.5" Horizontal Centers: 9" Center Line of Lower Spindle to Base: 4"
                    • # Stands: #16
                    • Roll diameter: 2.5"
                      23 Stand x 2.5″ x 48″ ARDCOR Rollformer $59,000!
                      $59,000
                      23 Stand x 2.5″ x 48″ ARDCOR Rollformer $59,000!
                      Stock #3364 Model #F15-2-1/2-48 Serial #83-088 Year: 1983 Direction: R-L Stands: 23 on a 24 Stand Base Spindle Dia: 2.5" Roll Space: 48" Horizontal Center: 16" Vertical Adjustment: 5"– 9" Base Top to Center Low
                      • # Stands: #23
                      • Roll diameter: 2.5"
                        1.5″ (38.1mm) x .05″ (1.27 mm) MCKAY Tube Mill, $55,000!
                        $55,000
                        1.5″ (38.1mm) x .05″ (1.27 mm) MCKAY Tube Mill, $55,000!
                        Stock #1728 Model #S.O. #4414 OD Range: .50" (12.7mm) - 1.5" (38.1mm) Wall Thickness Range: .020" (.508mm) - .05" (1.27mm) D/T Ratio: 10:1 - 60:1 Max Material Yield: 50,000 PSI Max Mill Speed: 150 FPM (46 MPM) Max
                        • Maximum diameter: 1.5"
                        • Maximum thickness: 0.05"
                          Categories:
                          Condition:
                          Manufacturer:
                          Location:
                          Price:
                          •  to 
                          <Prev | 391 | 392 | 393 | 394 | 395 | 396 | 397 | 398 | 399 | 400 | Next>