buy & sell, new & used machinery, machine tools & equipment

<Prev | 461 | 462 | 463 | 464 | 465 | 466 | 467 | 468 | 469 | 470 | Next>
Refine: Viewing 9321 - 9340 of 19764 matches
Sort by:
Items Per Page:  20  |  50 |  100
3/16" x 10' Used Elga Hydrapower Hydraulic Power Shear, Mdl. 10316, Front Operated Po
$19,500
3/16" x 10' Used Elga Hydrapower Hydraulic Power Shear, Mdl. 10316, Front Operated Po
Max. Cutting Length 120" Back Gauge Front Operated Power Back Gauge with Indicator Back Gauge Range 27" Throat 13 1/2" Type Hydraulic Number of Hold Downs (Hydraulic) 13 Strokes Per MInute 21 Hor
.060" - 6.5" Used Sunnen Power Stroker Honing Machine, Mdl. MBB-1801E, Power Str
$10,950
.060" - 6.5" Used Sunnen Power Stroker Honing Machine, Mdl. MBB-1801E, Power Str
Max. Honing Length 16" Spindle Speeds (12) 200 - 2,500 RPM Stroke Rates 80 - 310 SPM Power Stroke Length 1/2" - 3" Honing Oil Capacity 25 Gallons Voltage 440V ~ 3 Phase Horsepower 1 H.P. Floor Sp
Used Ramco Monoset Tool & Cutter Grinder, Mdl. UNOSET, Motorized Work Head, One Shot Lubri
$4,950
Used Ramco Monoset Tool & Cutter Grinder, Mdl. UNOSET, Motorized Work Head, One Shot Lubri
Wheelhead Capacity Spindle Speeds (3) 4,000- 5,729- 8,000 RPM Grinding Wheel Size 4" Longitudinal Slide Travel 6" Vertical Slide Travel 9.50" Cross Slide Travel 7.50" Workhead Capacity: Speed 4
11" Used N. Ferrara Motorized Metal Gang Slitter With Take Up, Mdl. , Foot Pedal, E-S
$6,750
11" Used N. Ferrara Motorized Metal Gang Slitter With Take Up, Mdl. , Foot Pedal, E-S
Thickness Range .002"/.060" Slitting Width 11" Speed Range 50 to 80 F.P.M Stroke 2" Slitter Knife Diameter 4" Spacer Size 3" Take up 5-1/2" Entrance Table 15" WEIGHT 650 Lbs. Foot Pedal
Used BMT Multi Barrel Slide Hone Finishing Mill, Flywheel Tumbler Deburring Machine, Mdl.
$7,500
Used BMT Multi Barrel Slide Hone Finishing Mill, Flywheel Tumbler Deburring Machine, Mdl.
Barrels 6 None
Used Kentrall Hardness Tensile Tester, Mdl. MC-2, Tooling, #A3607
$425
Used Kentrall Hardness Tensile Tester, Mdl. MC-2, Tooling, #A3607
Work Table 6" x 10" Voltage 115V ~ 1 Phase Dimensions (W x L x H) 18" x 15" x 24" Tooling
2.75" Used Eagle Tube End Former, Mdl. E2000, (6) EXTRA DIES, Allen Bradley SLC 500 P
$9,950
2.75" Used Eagle Tube End Former, Mdl. E2000, (6) EXTRA DIES, Allen Bradley SLC 500 P
Tube Capacity 2.75" Max. Wall Thickness 0.080" Average Machine Cycle Time 4 - 6 Seconds Water Supply 3 - 5 GPM Hydraulic Pump 15 GPM Oil Reservoir Capacity 81 Gallons WEIGHT 1,650 LBS. (6) EXTR
16 Ga. Used Marchant Foot Stretching & Shrinking Machine, Mdl. 6F, Set Of Stretching Jaws
$2,450
16 Ga. Used Marchant Foot Stretching & Shrinking Machine, Mdl. 6F, Set Of Stretching Jaws
Jaw Opening 16 GA. WEIGHT 400 Lbs. Set Of Stretching Jaws
60" Used Lodge & Shipley Right Angle T Lathe (Good Working Condition, Comes With Warr
$19,500
60" Used Lodge & Shipley Right Angle T Lathe (Good Working Condition, Comes With Warr
Swing in Gap 60" Carriage Travel 52.5" Compound Travel 16" Hole Thru Spindle 11-1/2" Distance Face Plate to Carriage 16" Distance Face Plate to Compound 4.13" - 20.5" Spindle Speeds (24) 4 - 225 RPM
7.5 KVA Used Rex Spot Welder With Long Arms, Mdl. 62FR, Foot Pedal, Rocker Arms, #A4077
$2,250
7.5 KVA Used Rex Spot Welder With Long Arms, Mdl. 62FR, Foot Pedal, Rocker Arms, #A4077
KVA Rating 7.5 KVA Throat 30" Voltage 230V, 60CY Foot Pedal Rocker Arms
11" x 18" Used Hardinge Precision Toolroom Turning, Facing, Boring Lathe, Mdl. T
$12,500
11" x 18" Used Hardinge Precision Toolroom Turning, Facing, Boring Lathe, Mdl. T
Swing Over Carriage 9" Swing Over Cross Slide 6" Distance Between Centers 18" Spindle Speeds (Variable) 125- 3,000 RPM Spindle Nose 4 Degree Taper Hole Thru Spindle 1 1/4" Feeds (Variable) 1/4"- 7 I
6,000 Lbs. x 48" Used Ransome Powered Welding Positioner, Mdl. , Foot Pedal, Push But
$17,500
6,000 Lbs. x 48" Used Ransome Powered Welding Positioner, Mdl. , Foot Pedal, Push But
Capacity 6,000 LBS. Table Size 48" Tilting Range 0 - 135 Degrees Motorized Horsepower 3 H.P. x 2 Motors Voltage 460V ~ 3 Phase Dimensions (WxDxH) 110" x 89" x 74" Foot Pedal Power Tilt Power R
1/8" - 5/16" Used Shuster Wire Straightener/Cutoff Machine, Mdl. 2A4V, Vari Spee
$11,500
1/8" - 5/16" Used Shuster Wire Straightener/Cutoff Machine, Mdl. 2A4V, Vari Spee
Wire Diameter .125" - .312" Speed Range (Variable) 28 - 200 FPM Voltage 480V ~ 3 Phase WEIGHT 2,400 Lbs. Vari Speed Drive Straightening Head
4.5" Used Conrac Hydraulic Tube Bender, Mdl. Digicon 255- SX, Digicon Digital Program
$19,500
4.5" Used Conrac Hydraulic Tube Bender, Mdl. Digicon 255- SX, Digicon Digital Program
Capacity: Round Tubing 4.5" x 0.312" W.T. Pipe 4" IPS x Schedule 80 Bend Direction Clockwise Bend Radius: Centerline Max. Without Booster 12" Centerline Max. With Booster 6" Max. Bend Angle 180
19-1/2" x 88" Used Kearney & Trecker Plain Type Horizontal Milling Machine W/ Un
$7,950
19-1/2" x 88" Used Kearney & Trecker Plain Type Horizontal Milling Machine W/ Un
Table Size 80" x 20" Vertical Table Travel 21" Longitudinal Table Travel 42" Cross Table Travel 14" Speed Selector Variable Speed Spindle Speed (16) 15 - 1500 RPM Table Feeds 3/8" To 90 IPM Table
1/16" - 3/16" Used Lewis Wire Straightener & Cut Off, Mdl. 2C3-829-6, Dies Inclu
$12,500
1/16" - 3/16" Used Lewis Wire Straightener & Cut Off, Mdl. 2C3-829-6, Dies Inclu
Dimensions (L x W x H) 122" x 39" x 48" Capacity (High Carbon, Alloy Or Steel Wire 1/16" to 1/8" Speed Range 100 Feet Per Minute Cutting Lengths 3" to 7-1/2", Clutching 7-1/2" and Longer Shuttle Length 72
SAJO PF-52 | Horizontal | Spindle Cat 40 |
$RFQ
SAJO PF-52 | Horizontal | Spindle Cat 40 |
Horizontal 11" x 49" Table Spindle taper Cat 40 Speeds Manual feed x, y, z 220v / 3 Phases Weight 3240 lbs Dimensions 63"x58"x62"
2012 CATERPILLAR D4K XL DOZER - W6645
$57,000
2012 CATERPILLAR D4K XL DOZER - W6645
4 CYL CAT ENGINE, HYDRO-STATIC TRANS W/ JOYSTICK STEERING, 18 IN PADS, 9FT 6 WAY BLADE
USED C FRAME PRESS 100 TON HANNIFIN HYDRAULIC
$RFQ
USED C FRAME PRESS 100 TON HANNIFIN HYDRAULIC
100 TON HANNIFIN HYDRAULIC C FRAME PRESS Floor standing Bed area: 96" L-R x 21" F-B Stroke approx.: 18" maximum Throat depth: 15" Ram diameter: 7.5" Floor to top of bed: 41" Power un
NEW CLEVELAND A3VHG VERTICAL KNEE MILL
$RFQ
NEW CLEVELAND A3VHG VERTICAL KNEE MILL
**PLEASE CLICK ON LINK BELOW FOR BROCHURE/SPECIFICATIONS AND PICTURE** http://www.clevelandmachinery.com/pdf/N2869.pdf
Categories:
Condition:
Manufacturer:
Location:
Price:
  •  to 
<Prev | 461 | 462 | 463 | 464 | 465 | 466 | 467 | 468 | 469 | 470 | Next>