Machine Sales – Buy or Sell New and Used Machinery and Machine Tools at Machine Sales

TORIT DMC-B DRYFLO OIL & MIST COLLECTOR - 630 CFM

$RFQ

SPECIFICATIONS MAXIMUM AIRFLOW: 630 CFM HEIGHT WITH LEGS: 79″ DEPTH: 29″ WIDTH: 28″ THIRD STAGE CARTRIDGE FILTER AREA: 82 (SQ FT) NUMBER OF CARTRIDGES: 1 GENERAL SHIPPING WEIGHT, APPROX: 500 LBS ELECTRICS: 110 VOLTS, 1

Bethlehem, PA
View Listing

1953 - HARDINGE DV-59 SECOND OPERATION LATHE - 1-1/16"

$RFQ

SPECIFICATIONS SPINDLE CAPACITY / 5C ROUND: 1-1/16″ BED LENGTH: 36″ SWING OVER BED: 9″ SPINDLE SPEEDS: 230 TO 3,500 RPM (8 STEPS) GENERAL DIMENSIONS: 67″ L-R X 32″ F-B X 57″ H WEIGHT, APPROX 1,550 LBS ELECTRICS: 220 VO

Swing: 9"
Centers: 36"

Bethlehem, PA
View Listing

1953 - TAFT-PEIRCE 1 MANUAL SURFACE GRINDER - 5" X 12"

$RFQ

SPECIFICATIONS TABLE WORKING SURFACE: 5″ X 12″ TABLE OVERALL: 33-1/4″ X 8″ T-SLOT IN TABLE CENTER: 1/2″ TABLE HEIGHT ABOVE FLOOR: 38-1/4″ TABLE HEIGHT ABOVE FLOOR W/SUB-BASE: 42-1/4″ WORK HEIGHT UNDER WHEEL: 12″ WHEEL: 7

Table width: 5"
Table length: 12"

Bethlehem, PA
View Listing

EVERETT ABRASIVE CUT-OFF SAW - 10"

$RFQ

SPECIFICATIONS WHEEL CAPACITY: 10″ WHEEL ARBOR SHAFT: 5/8″ ARBOR DRIVE: DUAL RAW EDGE SURE GRIP “V” BELT WITH STEEL SHEAVES CAPACITY: 1-1/2″ SOLID 2″ PIPE MOTOR: 3 HP SPECIAL HI-TORQUE MOTOR TOTALLY ENCLOSED FAN-COOLED S

Blade diameter: 10"

Bethlehem, PA
View Listing

BROWN & SHARPE MICROMASTER 612 HAND FEED GRINDER - 6" X 12"

$RFQ

SPECIFICATIONS GRINDING CAPACITY: 6” W X 12” L HEIGHT OF WORK GROUND WITH WHEEL – 8” OD X 1-1/4” HOLE: 12” DISTANCE – CENTER OF WHEEL SPINDLE TO TOP OF TABLE: 16” MAX – 3.5” MIN SPINDLE ANTI-FRICTION BEARING UNIT WITH O

Table width: 6"
Table length: 12"

Bethlehem, PA
View Listing

1977 - COILMATIC AIR FEED WITH PULL THRU STRAIGHTNER - 24" X .090"

$RFQ

SPECIFICATIONS CAPACITY: 24″ X .090″ FEED STROKE, ADJUSTABLE: 0″ – 15″ FEED RATES: 70 SPM @ 15″ STROKE (5) HARDENED STRAIGHTENER ROLLS: 3″ DIAMETER, ADJUSTABLE UPPER STRAIGHTENER ROLLS, MANUAL (CRANK) ADJUSTMENT TO FEE

Bethlehem, PA
View Listing

1977 - COILMATIC AIR FEED WITH PULL THRU STRAIGHTENER - 24" X .090"

$RFQ

SPECIFICATIONS CAPACITY: 24″ X .090″ FEED STROKE, ADJUSTABLE: 0″ – 15″ FEED RATES: 70 SPM @ 15″ STROKE (5) HARDENED STRAIGHTENER ROLLS: 3″ DIAMETER, ADJUSTABLE UPPER STRAIGHTENER ROLLS, MANUAL (CRANK) ADJUSTMENT TO FEE

Bethlehem, PA
View Listing

1973 - U S BAIRD 1 SPRING GENERATOR - .008" - .034"

$RFQ

SPECIFICATIONS MAXIMUM WIRE DIAMETER: .034″ MINIMUM WIRE DIAMETER: .008″ WIRE FEED LENGTH, RANGE: 6.45″ – 25.78″ WITH OPTIONAL CHANGE GEARS PRODUCTION SPEEDS, PIECES PER HOUR: 600 TO 5000 MOTOR HORSEPOWER: 1/2 HP GENERA

Wire diameter: 0.034"

Bethlehem, PA
View Listing

1962 - SUNNEN MBB1600 HORIZONTAL HONE - .060" - 6.5"

$RFQ

SPECIFICATIONS ID RANGE: 0.060″ TO 6.5″ SPEEDS (12): 200 – 1600 RPM (STEP PULLEY) HONE BORES UP TO 16″ IN LENGTH DEPENDING ON BORE DIAMETER GENERAL DIMENSIONS: 30″ L-R X 60″ F-B X 63″ H WEIGHT, APPROX: 600 LBS ELECTR

Maximum diameter: 6.5"
Stroke: 16"

Bethlehem, PA
View Listing

1994 - HANKISON 80400 WATER COOLED AIR DRYER - 400 SCFM

$RFQ

SPECIFICATIONS MINIMUM-MAXIMUM OPERATING CONDITIONS MIN INLET AIR PRESSURE (COMPRESSED AIR AT INLET TO DRYER): 10 PSIG (.70 BAR) MAX INLET AIR PRESSURE (COMPRESSED AIR AT INLET TO DRYER): STANDARD: 200 PSIG (14 BAR) OPT

Cubic feet per minute: 300CFM

Bethlehem, PA
View Listing

1981 - MANURHIN AUTOMATIC 3-39 BARFEED - 1.5" X 12 FT

$RFQ

SPECIFICATIONS MAXIMUM BAR LENGTH: 12′ MAXIMUM BAR DIAMETER, APPROX: 1-1/2″ NUMBER OF TUBES: 5 GENERAL HYDRAULIC UNIT DIMENSIONS: 31″ L-R X 18″ F-B X 28″ H BAR FEEDER DIMENSIONS: 16″ L-R X 18′ F-B X 17″ H ELECTRICS: 220

Maximum bar diameter: 1.5"
Maximum bar length: 12'

Bethlehem, PA
View Listing

1988 - HANSVEDT SM150B RAM TYPE EDM - 20 AMPS

$RFQ

SPECIFICATIONS WORK TABLE SIZE: 9″ X 15″ WORK TANK SIZE: 13″ X 20″ X 9″ DEEP TABLE POSITIONING LONGITUDINAL TRAVEL: 8″ TABLE POSITIONING CROSS TRAVEL: 6″ PLATEN TO TABLE DISTANCE: 16″ MAXIMUM RAM TRAVEL: 6″ RAM PLATEN SI

Power: 20A
Table width: 15"

Bethlehem, PA
View Listing

(3) HARDINGE CL-SE EXTENSION TOOLHOLDER - FOR T51 OR T65

$RFQ