buy & sell, new & used machinery, machine tools & equipment

<Prev | 951 | 952 | 953 | 954 | 955 | 956 | 957 | 958 | 959 | 960 | Next>
Refine: Viewing 19061 - 19080 of 19759 matches
Sort by:
Items Per Page:  20  |  50 |  100
RAMS 20 gauge CLEAT BENDER
$RFQ
RAMS 20 gauge CLEAT BENDER
• 24 inch long • Quick Release built into lower handle • 3 Position handle - right / left / center • Quality needle bearing design • Made in USA with 2 year warranty
Tin Knocker CLEAT BENDER
$RFQ
Tin Knocker CLEAT BENDER
30 inch long. Quickly forms uniform drive cleat edges on rectangular duct with no required set up or adjustment. The upper handle forms the cleat and the lower handle opens the work space for easy removal of the metal. M
RAMS 20 gauge Rotary HAND FLANGER
$RFQ
RAMS 20 gauge Rotary HAND FLANGER
• Forms 1/4" flange on straight or curved pieces with adjustable roll spacing • Hardened steel rollers • Edge finder C-clamp design • Made in USA with 2 year warranty
MANUAL RIGHT ANGLE FLANGER: 20 gauge
$RFQ
MANUAL RIGHT ANGLE FLANGER: 20 gauge
This Tin Knocker hand flanger puts a 7/32" flange on HVAC elbows and other radius fittings. Bench mounted, there is no gauge to set, and requires no special tools. SPECIFICATIONS: Capacity: 20 gauge x 7/32"
RAMS 24 gauge CRIMPER-BEADER
$RFQ
RAMS 24 gauge CRIMPER-BEADER
Made in USA. The RAMS hand operated Crimper-Beader machine will provide you with single pass crimping and beading. It will also allow fade away crimping by simply adjusting the knurled wheel (no tools needed). By removin
  • Maximum sheet capacity: 24Ga
    ROTARY CLADDING MACHINE
    $RFQ
    ROTARY CLADDING MACHINE
    Capacity: 22 gauge(.030") mild steel Depth of Throat: 7" Weight: 71 pounds Imported machine. 6 Standard Roll sets Included: 1/4" turning, 1/8" turning, wiring, crimping, burring, & ogee be
    • Maximum sheet capacity: 22Ga
      PITTSBURGH LOCK HAMMER
      $RFQ
      PITTSBURGH LOCK HAMMER
      Capacity: 16 gauge(.060") mild steel Weight: 75 pounds Imported machine
      DUCTFORMER TDFC BRAKE
      $RFQ
      DUCTFORMER TDFC BRAKE
      Our Ductformer TDFC Brake is for bending the 90 degree bends on rectangular duct work. It is a very efficient machine to bend straight duct joints and fittings with TDC type and TDF type flange connectors. Designed so on
      POWER ROTARY CRIMPER BEADER MACHINE
      $RFQ
      POWER ROTARY CRIMPER BEADER MACHINE
      Made in USA. 14 gauge capacity. Beading, Crimping, flanging. Features: Main switch and air regulator. Integrated roller storage system to hold your frequently used roll sets. Control panel allows “on the fly” pressure a
      DUCTFORMER POWER ROTARY MACHINE
      $RFQ
      DUCTFORMER POWER ROTARY MACHINE
      $8280. Pneumatically Actuated $9540. Hydraulically Actuated 14 gauge (.075") capacity with 10" throat. Made in USA. DuctFormer DFRF-1410 can do most all your rotary forming. The machine comes with your ch
      RAMS POWER FLANGER
      $RFQ
      RAMS POWER FLANGER
      20 gauge capacity. Stand alone type comes mounted in a heavy duty cabinet. The Power Flanger will form a 7/32” right angle flange on either straight or curved pieces. It has an adjustable “auto guide” which can be set to
      ROTARY SLITTER by RAMS
      $RFQ
      ROTARY SLITTER by RAMS
      Heavy duty 24 inch throat slitters with accurate easy adjusting back gauge and scale. Shown without optional stand. Made in USA. Capacity: 16 Gauge (.06"). Speed: 65 FPM. 1 H.P. electric motor, 115/208-230V, Min
      ROTARY SLITTERS
      $RFQ
      ROTARY SLITTERS
      2024 Slitter $1995. 1624 Slitter $2395. Capactiy: 20 Gauge (.036") Capacity: 16 Gauge (.06") Throat: 24" Throa
      TINKNOCKER BARFOLDER
      $RFQ
      TINKNOCKER BARFOLDER
      An affordable, versatile 30 inch long barfolder. The TinKnocker No. 30 Barfolder uses one motion to clamp and fold to desired angle. Easy to adjust internal back gauge allows for quick flange width selection. This machi
      TIN KNOCKER HVAC DUCT BEADER
      $RFQ
      TIN KNOCKER HVAC DUCT BEADER
      Stop cross braking! Save time! Save man power with a one man operation. This heavy duty 16 gauge (.06") beader comes with 5 sets of bead tooling that can be located anywhere over the 60" working length. Tooling
      TINKNOCKER FOURPLEX CLEAT FORMER
      $RFQ
      TINKNOCKER FOURPLEX CLEAT FORMER
      Configured with S Lock & Drive Cleat rolls down the center and one choice of either Male & Female Button Lock or Pittsburgh Rolls with 3 in 1 rolls (Right Angle flange, Standing seam & Tee connection). This m
      DUCTFORMER 4-WAY CLEAT FORMER
      $RFQ
      DUCTFORMER 4-WAY CLEAT FORMER
      Made in USA, DuctFormer CR8-SDC makes Slip & Drive Cleats on the inboard rolls. 2 sets of optional rolls can be mounted on the outboard roll shaft extensions for 4 functions. 75 feet per minute. * Optional Rolls for
      RAMS Auxiliary Rollforming MACHINE
      $RFQ
      RAMS Auxiliary Rollforming MACHINE
      Made in USA - Price includes 2 sets of rolls included FREE. The machine for people who want very fast roller die changes. Capacity: 20 gauge Max // 26 gauge Min (depends on roll set used). Speed: 40 Feet Per Minute. F
      TINKNOCKER S & DRIVE HVAC ROLLFORMER
      $RFQ
      TINKNOCKER S & DRIVE HVAC ROLLFORMER
      A great machine to turn that scrap sheet metal into "S" and Drive Cleats. A fast payback item, especially when purchased with the Slip & and Drive Slitter Attachment that is now included. For an extra cost
      RAMS S & Drive Forming MACHINE
      $RFQ
      RAMS S & Drive Forming MACHINE
      Made in USA Capacity: 22 gauge Maximum // 28 gauge Minimum (Mild Steel) Speed: 30 FPM Weight: 500 Lbs Motor: 3 H.P., choose 115 V or 208-230 Volts, 1 phase Torrington Needle Bearings. Hardened steel components thro
      Categories:
      Condition:
      Manufacturer:
      Location:
      Price:
      •  to 
      <Prev | 951 | 952 | 953 | 954 | 955 | 956 | 957 | 958 | 959 | 960 | Next>