buy & sell, new & used machinery, machine tools & equipment

<Prev | 741 | 742 | 743 | 744 | 745 | 746 | 747 | 748 | 749 | 750 | Next>
Refine: Viewing 14861 - 14880 of 19759 matches
Sort by:
Items Per Page:  20  |  50 |  100
1973 - U S BAIRD 1 SPRING GENERATOR - .008" - .034"
$RFQ
1973 - U S BAIRD 1 SPRING GENERATOR - .008" - .034"
SPECIFICATIONS MAXIMUM WIRE DIAMETER: .034″ MINIMUM WIRE DIAMETER: .008″ WIRE FEED LENGTH, RANGE: 6.45″ – 25.78″ WITH OPTIONAL CHANGE GEARS PRODUCTION SPEEDS, PIECES PER HOUR: 600 TO 5000 MOTOR HORSEPOWER: 1/2 HP GENERA
  • Wire diameter: 0.034"
    1962 - SUNNEN MBB1600 HORIZONTAL HONE - .060" - 6.5"
    $RFQ
    1962 - SUNNEN MBB1600 HORIZONTAL HONE - .060" - 6.5"
    SPECIFICATIONS ID RANGE: 0.060″ TO 6.5″ SPEEDS (12): 200 – 1600 RPM (STEP PULLEY) HONE BORES UP TO 16″ IN LENGTH DEPENDING ON BORE DIAMETER GENERAL DIMENSIONS: 30″ L-R X 60″ F-B X 63″ H WEIGHT, APPROX: 600 LBS ELECTR
    • Maximum diameter: 6.5"
    • Stroke: 16"
      1994 - HANKISON 80400 WATER COOLED AIR DRYER - 400 SCFM
      $RFQ
      1994 - HANKISON 80400 WATER COOLED AIR DRYER - 400 SCFM
      SPECIFICATIONS MINIMUM-MAXIMUM OPERATING CONDITIONS MIN INLET AIR PRESSURE (COMPRESSED AIR AT INLET TO DRYER): 10 PSIG (.70 BAR) MAX INLET AIR PRESSURE (COMPRESSED AIR AT INLET TO DRYER): STANDARD: 200 PSIG (14 BAR) OPT
      • Cubic feet per minute: 300CFM
        1981 - MANURHIN AUTOMATIC 3-39 BARFEED - 1.5" X 12 FT
        $RFQ
        1981 - MANURHIN AUTOMATIC 3-39 BARFEED - 1.5" X 12 FT
        SPECIFICATIONS MAXIMUM BAR LENGTH: 12′ MAXIMUM BAR DIAMETER, APPROX: 1-1/2″ NUMBER OF TUBES: 5 GENERAL HYDRAULIC UNIT DIMENSIONS: 31″ L-R X 18″ F-B X 28″ H BAR FEEDER DIMENSIONS: 16″ L-R X 18′ F-B X 17″ H ELECTRICS: 220
        • Maximum bar diameter: 1.5"
        • Maximum bar length: 12'
          1988 - HANSVEDT SM150B RAM TYPE EDM - 20 AMPS
          $RFQ
          1988 - HANSVEDT SM150B RAM TYPE EDM - 20 AMPS
          SPECIFICATIONS WORK TABLE SIZE: 9″ X 15″ WORK TANK SIZE: 13″ X 20″ X 9″ DEEP TABLE POSITIONING LONGITUDINAL TRAVEL: 8″ TABLE POSITIONING CROSS TRAVEL: 6″ PLATEN TO TABLE DISTANCE: 16″ MAXIMUM RAM TRAVEL: 6″ RAM PLATEN SI
          • Power: 20A
          • Table width: 15"
            (3) HARDINGE CL-SE EXTENSION TOOLHOLDER - FOR T51 OR T65
            $RFQ
            (3) HARDINGE CL-SE EXTENSION TOOLHOLDER - FOR T51 OR T65
            FITS HARDINGE MODEL T51 OR T65 CNC LATHES
            HARDINGE CL-56 END TAPPING TOOLHOLDER - FOR T51 OR T65 CNC LATHE
            $RFQ
            HARDINGE CL-56 END TAPPING TOOLHOLDER - FOR T51 OR T65 CNC LATHE
            SPECIFICATIONS FITS HARDINGE MODEL T51 OR T65 CNC LATHES
            HARDINGE CL-56 END TAPPING TOOLHOLDER - FOR T51 OR T65 CNC LATHE
            $RFQ
            HARDINGE CL-56 END TAPPING TOOLHOLDER - FOR T51 OR T65 CNC LATHE
            SPECIFICATIONS FITS HARDINGE MODEL T51 OR T65 CNC LATHES
            MFG UNKNOWN GLASS FRONT/ 2 DOOR CABINET - 36" X 24" X 78"
            $RFQ
            MFG UNKNOWN GLASS FRONT/ 2 DOOR CABINET - 36" X 24" X 78"
            SPECIFICATIONS 4 SHELF GLASS FRONT 2 DOOR CABINET GENERAL DIMENSIONS: 36″ L-R X 24″ F-B X 78″ H WEIGHT, APPROX: 200 LBS
            MARELCO CL000876-14 TRANSFORMER - 50 KVA
            $RFQ
            MARELCO CL000876-14 TRANSFORMER - 50 KVA
            SPECIFICATIONS PRIMARY VOLTS – 200/230/380/415 V DELTA SECONDARY – 230 WYE +/- 5% + 10% TAPS WITH NEUTRAL
            • Power: 50KVA
              HARDINGE 6" 3-JAW CHUCK - 6" 3-JAW
              $RFQ
              HARDINGE 6" 3-JAW CHUCK - 6" 3-JAW
              SPECIFICATIONS DIAMETER: 6″ HOLE: 1.5″
              HARDINGE A SQUARE PRODUCTION TOOLPOST
              $RFQ
              HARDINGE A SQUARE PRODUCTION TOOLPOST
              USED HARDINGE MODEL A SQUARE PRODUCTION TOOLPOST
              MARELCO PTM-9263E TRANSFORMER - 50 KVA
              $RFQ
              MARELCO PTM-9263E TRANSFORMER - 50 KVA
              SPECIFICATIONS PRIMARY: 208 VOLTS SECONDARY: 230 VOLTS KVA RATING: 50
              • Power: 50KVA
                EXSYS/EPPINGER S20 DEAD LENGTH COLLET - 2"
                $RFQ
                EXSYS/EPPINGER S20 DEAD LENGTH COLLET - 2"
                SPECIFICATIONS BAR CAPACITY: 2″ SPINDLE MOUNT: A2-6 USES HARDINGE S20 STYLE COLLET PADS DEAD LENGTH/PUSH TYPE ACTUATION
                MTC E-4436 DIE HANDLER/FLIPPER - 2,500 LBS
                $RFQ
                MTC E-4436 DIE HANDLER/FLIPPER - 2,500 LBS
                SPECIFICATIONS LOAD CAPACITY: 2,500 LBS WORKING AREA UPPER PLATEN: 12″ X 38″ CENTER PLATEN: 26″ X 39-1/2″ PLATEN CLEARANCE 0 DEGREES MAXIMUM: 27″ 0 DEGREES MINIMUM: 9″ 180 DEGREES MAXIMUM: 21-1/4″ 180 DEGREES MINIMUM:
                1994 - HARDINGE EC-12-0750 HYDRODYNAMIC BARFEED - 3/4" X 12'
                $RFQ
                1994 - HARDINGE EC-12-0750 HYDRODYNAMIC BARFEED - 3/4" X 12'
                SPECIFICATIONS MAX. CAPACITY: 3/4″ X 12′ FEATURES ROTATING MULTI TUBE DESIGN WITH 4 TUBES
                • Maximum bar diameter: 0.75"
                • Maximum bar length: 12'
                  USED WALKER TURNER 20" SINGLE SPINDLE DRILL - 20"
                  $RFQ
                  USED WALKER TURNER 20" SINGLE SPINDLE DRILL - 20"
                  SPECIFICATIONS CAPACITY: 20″ NUMBER OF SPEEDS: 15 SPEED RANGE: 260 – 5200 RPM SPINDLE TRAVEL: 6-1/2″ SPINDLE TAPER: #3 MT GENERAL DIMENSIONS, APPROX.: 2′ L-R X 3′ F-B X 4′ H WEIGHT, APPROX.: 250 LBS ELECTRICS: 220 VOLTS
                  • Swing: 20"
                  • Motor: 0.5HP
                    1982 - BROWN & SHARPE MICROMASTER 612 HAND FEED SURFACE GRINDER - 6" X 12"
                    $RFQ
                    1982 - BROWN & SHARPE MICROMASTER 612 HAND FEED SURFACE GRINDER - 6" X 12"
                    SPECIFICATIONS GRINDING CAPACITY: 6” W X 12” L HEIGHT OF WORK GROUND WITH WHEEL – 8” OD X 1-1/4” HOLE: 12” DISTANCE – CENTER OF WHEEL SPINDLE TO TOP OF TABLE: 16” MAX – 3.5” MIN SPINDLE ANTI-FRICTION BEARING UNIT WITH OR
                    • Table width: 6"
                    • Table length: 12"
                      1980 - BROWN & SHARPE MICROMASTER 612 HAND FEED GRINDER - 6" X 12"
                      $RFQ
                      1980 - BROWN & SHARPE MICROMASTER 612 HAND FEED GRINDER - 6" X 12"
                      SPECIFICATIONS GRINDING CAPACITY: 6” W X 12” L HEIGHT OF WORK GROUND WITH WHEEL – 8” OD X 1-1/4” HOLE: 12” DISTANCE – CENTER OF WHEEL SPINDLE TO TOP OF TABLE: 16” MAX – 3.5” MIN SPINDLE ANTI-FRICTION BEARING UNIT WITH OR
                      • Table width: 6"
                      • Table length: 12"
                        POWERHOLD 8.25 LH3A6FS CHUCK, 8-1/4" 3-JAW
                        $RFQ
                        POWERHOLD 8.25 LH3A6FS CHUCK, 8-1/4" 3-JAW
                        WILL FIT HARDINGE CONQUEST T51 AND CONQUEST T42 “BIG BORE” LATHES SPECIFICATIONS DIAMETER: 8-1/4″ MOUNTING FOR HARDINGE CNC LATHE: A2-6″ THROUGH HOLE: 2″
                        Categories:
                        Condition:
                        Manufacturer:
                        Location:
                        Price:
                        •  to 
                        <Prev | 741 | 742 | 743 | 744 | 745 | 746 | 747 | 748 | 749 | 750 | Next>