buy & sell, new & used machinery, machine tools & equipment

<Prev | 541 | 542 | 543 | 544 | 545 | 546 | 547 | 548 | 549 | 550 | Next>
Refine: Viewing 10881 - 10900 of 19759 matches
Sort by:
Items Per Page:  20  |  50 |  100
NEW 650 F ELECTRIC, 18"W 18"L 18"H, FB SERIES
$RFQ
NEW 650 F ELECTRIC, 18"W 18"L 18"H, FB SERIES
SINGLE SIDE SWING DOOR WITH PRESSURE TYPE LATCH. TUBULAR HEATING ELEMENTS AND 7" CIRCULATING FAN ARE IN A REAR MOUNTED CHAMBER. HEATED AIR IS CIRCULATED INSIDE WORK CHAMBER COMPOUND HORIZONTAL FROM BOTH SIDE WALLS T
  • Chamber width: 18"
  • Chamber length: 18"
    NEW 500 F GAS FIRED BELT OVEN 4'W 23'L 2'H
    $RFQ
    NEW 500 F GAS FIRED BELT OVEN 4'W 23'L 2'H
    48" WIDE VARIABLE SPEED STAINLESS STEEL FLAT WIRE BELT CAPABLE OF UP TO 1200 LB LOAD. HEAT IS SUPPLIED BY A MAXON 800,000 BTU MODULATING GAS BURNER FIRING INTO TOP MOUNTED PLENUM SEPARATE FROM THE WORK CHAMBER. HEA
    • Chamber width: 48"
    • Chamber length: 276"
      2002 Cleaver-Brooks, CB700-80, 80 HP, 15 PSI
      $RFQ
      2002 Cleaver-Brooks, CB700-80, 80 HP, 15 PSI
      Each used boiler is fully refurbished to like-new condition and backed by a 1 year parts warranty. All mechanical and electrical components are individually tested, reassembled and then the entire system is tested as a w
      1980 Cleaver-Brooks, CB800-100, 100 HP, 15 PSI
      $RFQ
      1980 Cleaver-Brooks, CB800-100, 100 HP, 15 PSI
      Each used boiler is fully refurbished to like-new condition and backed by a 1 year parts warranty. All mechanical and electrical components are individually tested, reassembled and then the entire system is tested as a w
      25" X 25" DOALL MODEL C650NC HIGH PRODUCTION TWIN POST AUTOMATIC
      $RFQ
      25" X 25" DOALL MODEL C650NC HIGH PRODUCTION TWIN POST AUTOMATIC
      25" X 25" DOALL MODEL C650NC HIGH PRODUCTION TWIN POST AUTOMATIC BAND SAW MODEL C650NC MANUFACTURED 2005 RACO Stock Number R018149 CAPACITY --------- ( ROUND ) ------------------- 26" CAPACITY ----
      FASTEMS system with Hüller Hille NBH 230 R and REIDEN RX
      $1,590,000
      FASTEMS system with Hüller Hille NBH 230 R and REIDEN RX
      Year: 2007 Make: Fastems Model: Anlage Condition: Good Machine Status: Under Power Shipping Info: Rigging Fee Extra Weight: 50.7 t Country:Switzerland Buyers Premium: A 5 % Buyers Premium applies to the
      Pratt & Whitney 6" vertical Shaper model B #M-1506
      $3,495
      Pratt & Whitney 6" vertical Shaper model B #M-1506
      Year: ? Make: Pratt & Whitney Model: 6 Inch model-B/M-1506 Condition: Good Electrical: 230/460/3 wired 230 Machine Status: Can be powered up Shipping Info: We can load Weight: 6000 Dimension: L x W x H 5 x
      Cincinnati Shear: 12ft x 1/2" Series 5000 x 12
      $19,995
      Cincinnati Shear: 12ft x 1/2" Series 5000 x 12
      Year: 1980's Make: Cincinnati Model: Series 5000 x 12 Condition: Good Electrical: 230/3Phase Machine Status: Can be powered up Shipping Info: Rigging Fee Extra Weight: 28,600 Dimension: L x W x H Machin
      • Maximum thickness: 0.5"
      • Cutting length: 144"
        1993 Cleaver-Brooks, CBW-200-600, 200 HP, 200 PSI
        $RFQ
        1993 Cleaver-Brooks, CBW-200-600, 200 HP, 200 PSI
        Each used boiler is fully refurbished to like-new condition and backed by a 1 year parts warranty. All mechanical and electrical components are individually tested, reassembled and then the entire system is tested as a w
        K O LEE MODEL S718 MANUAL SURFACE GRINDER, 6" X 18"
        $RFQ
        K O LEE MODEL S718 MANUAL SURFACE GRINDER, 6" X 18"
        SPECIFICATIONS TABLE WORKING SURFACE: 6" X 19" LONGITUDINAL TABLE TRAVEL: 20" CROSS FEED TABLE TRAVEL: 7-1/4" DISTANCE TOP SURFACE OF TABLE TO CENTERLINE OF SPINDLE (WORK HGT): 3-1/8"
        • Table width: 18"
        • Table length: 6"
          #20-225 Robertson/Hartford Automated Flat Die Thread Roller
          $RFQ
          #20-225 Robertson/Hartford Automated Flat Die Thread Roller
          No description providedScrew Diameter Capacity1/4" thru 1/2" Maximum Thread Lengthto 3" Thread Length at Max. Diameter1-1/2" Maximum Shank Length4" Production Rate135 - 225 PPM Die Pocket Depth3-1/8" Flat Die SizeStandar
          • Maximum workpiece diameter: 0.5"
          • Maximum workpiece diameter: 0.5"
          • Maximum thread length: 3"
            #10 Waterbury Hand Feed Flat Die Thread Roller
            $RFQ
            #10 Waterbury Hand Feed Flat Die Thread Roller
            No description providedMaximum Blank Length2" Maximum Diameter1/4" Maximum Thread Length2" Maximum Production60 PPM
            • Maximum workpiece diameter: 0.25"
            • Maximum workpiece diameter: 0.25"
            • Maximum thread length: 2"
              1000 KW Lawless Detroit Diesel Generator Set
              $72,500
              1000 KW Lawless Detroit Diesel Generator Set
              Stand by unit with 162.5 hours on meter 15'11" long 104" wide 124" high + muffler weight approx 24,000 lbs
              • Power: 1000kW
                SNK MDL. FSP-120V CNC PROFILER 120" X 50" X 25", 5 axis
                $165,000
                SNK MDL. FSP-120V CNC PROFILER 120" X 50" X 25", 5 axis
                SNK MDL. FSP-120V CNC PROFILER, Vertical, 5-Axis Type, S/N 451795, (1996), 48" x 124" Table, Manual Took Changing, X=120, Y=50", Z=25", A/B-Axis = 25-Degrees, CAT-50 Spindle Taper, 4,000 RPM Spindle S
                • X axis: 120"
                • Y axis: 50"
                  30V 5 axis CNC Cincinnati Milacron Gantry Mill 2 spindle rail type
                  $325,000
                  30V 5 axis CNC Cincinnati Milacron Gantry Mill 2 spindle rail type
                  5-AXIS CNC VERTICAL PROFILE 504" X 64" X 25" CINCINNATI MILACRON MDL. 30V 2-SPINDLE CNC PROFILER, S/N 3239H0191-14, (1991), Twin Spindle 5-Axis Gantry Type, 100" x 470" Table, Manual To
                  • X axis: 504"
                  • Y axis: 64"
                    NEW! SHARP SVL-4525SE-M 45 X 25 X 20" LINEAR WAY VERTICAL MACHINING CE
                    $125,100
                    NEW! SHARP SVL-4525SE-M 45 X 25 X 20" LINEAR WAY VERTICAL MACHINING CE
                    We are an authorized dealer of Sharp Machinery. Please keep in mind that Sharp is constantly looking for new technology and design to enhance the quality and features of its products. Specifications and features will cha
                    • X axis: 45"
                    • Y axis: 25"
                      NEW! SHARP SVL-4525SE-F 45 X 25 X 20" LINEAR WAY VERTICAL MACHINING CE
                      $126,900
                      NEW! SHARP SVL-4525SE-F 45 X 25 X 20" LINEAR WAY VERTICAL MACHINING CE
                      We are an authorized dealer of Sharp Machinery. Please keep in mind that Sharp is constantly looking for new technology and design to enhance the quality and features of its products. Specifications and features will cha
                      • X axis: 45"
                      • Y axis: 25"
                        NEW! SHARP SVL-4525SX-M 45 X 25 X 20" LINEAR WAY VERTICAL MACHINING CE
                        $135,000
                        NEW! SHARP SVL-4525SX-M 45 X 25 X 20" LINEAR WAY VERTICAL MACHINING CE
                        We are an authorized dealer of Sharp Machinery. Please keep in mind that Sharp is constantly looking for new technology and design to enhance the quality and features of its products. Specifications and features will cha
                        • X axis: 45"
                        • Y axis: 25"
                          NEW! SHARP SVL-4525SX-F 45 X 25 X 20" LINEAR WAY VERTICAL MACHINING CE
                          $124,488
                          NEW! SHARP SVL-4525SX-F 45 X 25 X 20" LINEAR WAY VERTICAL MACHINING CE
                          We are an authorized dealer of Sharp Machinery. Please keep in mind that Sharp is constantly looking for new technology and design to enhance the quality and features of its products. Specifications and features will cha
                          • X axis: 45"
                          • Y axis: 25"
                            #20 Hartford 20-225 Automated Flat Die Thread Roller
                            $RFQ
                            #20 Hartford 20-225 Automated Flat Die Thread Roller
                            No description providedScrew Diameter Capacity1/4" thru 1/2" Maximum Thread Lengthto 3" Thread Length at Max. Diameter1-1/2" Maximum Shank Length4" Production Rate135 - 225 PPM Die Pocket Depth3-1/8" Flat Die SizeStandar
                            • Maximum workpiece diameter: 0.5"
                            • Maximum workpiece diameter: 0.5"
                            • Maximum thread length: 1.5"
                              Categories:
                              Condition:
                              Manufacturer:
                              Location:
                              Price:
                              •  to 
                              <Prev | 541 | 542 | 543 | 544 | 545 | 546 | 547 | 548 | 549 | 550 | Next>