buy & sell, new & used machinery, machine tools & equipment

<Prev | 461 | 462 | 463 | 464 | 465 | 466 | 467 | 468 | 469 | 470 | Next>
Refine: Viewing 9241 - 9260 of 19759 matches
Sort by:
Items Per Page:  20  |  50 |  100
1999 PREMIER MODEL 10120-R HYDRAULIC PRESS BRAKE, 10’ X 120 TON
$RFQ
1999 PREMIER MODEL 10120-R HYDRAULIC PRESS BRAKE, 10’ X 120 TON
SPECIFICATIONS CAPACITY: 120TONS OVERALL LENGTH OF BED AND RAM: 120” DISTANCE BETWEEN HOUSINGS: 100” MOTOR: 20 HP BENDING CAPACITY (MILD STEEL): 10’ X 3/16” STROKE LENGTH: 8” OPEN HEIGHT: 15” SHUT HEIGHT: 7” G
  • Tonnage: 120T
    1998 Haas VF-4APC Vertical Machining Center with Pallets, 50" X 20&quo
    $RFQ
    1998 Haas VF-4APC Vertical Machining Center with Pallets, 50" X 20&quo
    TRAVELS X-AXIS: 50" Y-AXIS: 20" Z-AXIS: 25" SPINDLE NOSE TO TABLE: 4" – 29" TABLE LENGTH: 52" WIDTH: 18" MAXIMUM WEIGHT ON TABLE: 3,500 LBS T-SLOTS T-SLOTS WIDTH: .625&quo
    • X axis: 50"
    • Y axis: 20"
      2017 CATERPILLAR 308E2 CR EXCAVATOR
      $95,500
      2017 CATERPILLAR 308E2 CR EXCAVATOR
      4 CYL ENGINE, 18 IN RUBBER TRACKS, BLADE, GP BUCKET, QUICK CONNECT, PLUMBING ON STICK, PATTERN CHANGER, ENCLOSED CAB W/ A/C & HEAT, 306 HRS SHOWING
      2006 JOHN DEERE 310G BACKHOE
      $35,500
      2006 JOHN DEERE 310G BACKHOE
      4 CYL JD ENGINE, 4 SPD SHUTTLE SHIFT TRANS, 4X4, FRONT GP BUCKET (7 FT 1 IN WIDE), REAR GP BUCKET (18 IN WIDE), 12-16.5 FRONT TIRES, 19.5L-24 REAR TIRES, 2 LEVER REAR JOYSTICK CONTROLS, 1649 HRS SHOWING
      TOYODA MODEL FHN100T 3-AXIS HORIZONTAL MACHINING CENTER
      $RFQ
      TOYODA MODEL FHN100T 3-AXIS HORIZONTAL MACHINING CENTER
      TOYODA MODEL FHN100T 3-AXIS HORIZONTAL MACHINING CENTER<br /> <br /> New 1986<br /> <br /> Motor Driven with 35 HP, 3-Phase, 60 Cycle, AC Spindle Drive<br /> <br /> EQUIPPED WITH: Fanu
      1991 EATON LEONARD MODEL VB200HP CNC ROTARY TUBE BENDER, 2" x .145&quo
      $RFQ
      1991 EATON LEONARD MODEL VB200HP CNC ROTARY TUBE BENDER, 2" x .145&quo
      SPECIFICATIONS BENDING CAPACITY MAXIMUM BENDING CAPACITY: 2” OD X .145” WALL MAXIMUM CENTERLINE BENDING RADIUS: 8” MAXIMUM TRAVEL OF BEND ARM: 195 DEGREES MAXIMUM POB DEGREES: UNLIMITED SPEEDS: 30 RPM – DEGREE
      • Maximum diameter: 2"
        DENISON C-FRAME HYDRAULIC PRESS, 8 TON
        $RFQ
        DENISON C-FRAME HYDRAULIC PRESS, 8 TON
        SPECIFICATIONS CAPACITY: 8 TON STROKE: 12" DAYLIGHT: 18" THROAT: 8" BED AREA: 10" X 16" GENERAL ELECTRICS: 480 VOLTS, 3 PH, 60 CYC DIMENSIONS 24” LR X 48” FB X 77” H EQUIPPED
        • Tonnage: 8T
        • Stroke: 12"
          DENISON C-FRAME HYDRAULIC PRESS, 8 TON
          $RFQ
          DENISON C-FRAME HYDRAULIC PRESS, 8 TON
          SPECIFICATIONS CAPACITY: 8 TON STROKE: 12" DAYLIGHT: 18" THROAT: 8" BED AREA: 10" X 16" GENERAL DIMENSIONS: 24” LR X 48” FB X 80” H SHIPPING DIMENSIONS: 48” LR X 48” LR X 80” H E
          • Tonnage: 8T
          • Stroke: 12"
            60" x 7" Paxson Slitting Head
            $RFQ
            60" x 7" Paxson Slitting Head
            Make: Paxson Arbor Width: 67" Arbor Diameter: 7" Adjustable Arbors Feed-Up Motor & Gear Box
            • Maximum workpiece width: 60"
            • Maximum workpiece thickness: 0.187"
              60" x 40,000Lb Paxson Recoiler
              $RFQ
              60" x 40,000Lb Paxson Recoiler
              Make: Paxson Mandrel Width: 62" Coil ID: 20" Coil OD: 72" Powered Gripper Powered Push-Off Motor: 50HP DC 650 / 2500 RPM
              • Maximum weight capacity: 40000Lb
              • Maximum coil width: 60"
                2000 Hitachi Seiki Model HT-23RIII CNC Lathe Seicos Control
                $34,995
                2000 Hitachi Seiki Model HT-23RIII CNC Lathe Seicos Control
                Year: 2000 Make: Hitachi Seiki Model: HT-23R III Condition: Good Electrical: 230/3Phase Machine Status: Under Power Shipping Info: Rigging Fee Extra Weight: 10500 Dimension: L x W x H 12' x 7' x 8&
                2013 INGERSOLL RAND UP6-40-125 ROTARY SCREW AIR COMPRESSOR & AIR DRYER
                $9,500
                2013 INGERSOLL RAND UP6-40-125 ROTARY SCREW AIR COMPRESSOR & AIR DRYER
                MOTOR VOLTAGE: 460 VOLT AC PHASE: 3 PHASE ENGINE: 40 HP PUMP CFM: 181 CFM RATES @: 125 PSI PUMP TYPE: ROTARY MAXIMUM PSI: 125 PSI AFTER COOLER: YES PUMP DRIVE: BELT DRIVE OIL TYPE: OIL LUBRICATED GENERAL
                2006 Calypso CNC water jet
                $57,995
                2006 Calypso CNC water jet
                Year: 2006 Make: Calypso Model: Hammerhead Condition: Good Machine Status: Not Under Power Shipping Info: We can load Weight: 6000 Dimension: L x W x H Machine Location: City: On Request State: Florida
                Pines # 2 hyd. Mandrel tube bender
                $69,795
                Pines # 2 hyd. Mandrel tube bender
                Year: ? Make: Pines Model: #2 Condition: Excellent Electrical: 208/3Phase Machine Status: Under Power Shipping Info: We can load Weight: 4500 Dimension: L x W x H 8ft x 4 ft x 4 ft Machine Location: Ci
                Mori Seiki # NT1000 / WZ Integrated Mill / Turn Center
                $155,995
                Mori Seiki # NT1000 / WZ Integrated Mill / Turn Center
                Year: 2010 Make: Mori Seiki Model: NT1000 / WZ Condition: Excellent Electrical: 230/3Phase Machine Status: Under Power Shipping Info: Rigging Fee Extra Weight: 18740 Dimension: L x W x H 106.5 x 95.5 x 93.
                2012 Okuma Multus B200II turning/milling center
                $409,990
                2012 Okuma Multus B200II turning/milling center
                Year: 2012 Make: Okuma Model: Multus B200II Condition: Excellent Electrical: 230/460/3 wired 460 Machine Status: Under Power Shipping Info: Rigging Fee Extra Weight: 25000? Dimension: L x W x H Machine
                10' x 1/4" NIAGARA SPARTAN SP10-1/4 HYDRAULIC SQUARING SHEAR
                $RFQ
                10' x 1/4" NIAGARA SPARTAN SP10-1/4 HYDRAULIC SQUARING SHEAR
                10' x 1/4" NIAGARA SPARTAN SP10-1/4 HYDRAULIC SQUARING SHEAR S/N S65791 NEW 1991 SHEARING CAPACITY -- ( MILD STEEL ) ------- 10' X 1/4" SHEARING CAPA
                • Maximum thickness: 0.25"
                • Cutting length: 10"
                  Best 960 Radial Arm Saw
                  $4,392
                  Best 960 Radial Arm Saw
                  The Best 960 radial arm saw offers adaptability, versatility, precision and durability to shops of all sizes. THREE PHASE MOTOR POWER 4 (3) Hp (Kw) SINGLE PHASE MOTOR POWER 3 (2.2) Hp (Kw) MOTOR SPEED 3360 DIAME
                  Junior 640 Radial Arm Saw
                  $3,832
                  Junior 640 Radial Arm Saw
                  The Junior 640 radial arm saw offers adaptability, versatility, precision and durability to shops of all sizes. Heavy castings and the eight bearing saw carriage makes this machine very accurate and rigid. THREE PHAS
                  3/8" Patterson Wire Straighten And Cut Machine
                  $RFQ
                  3/8" Patterson Wire Straighten And Cut Machine
                  No description providedMaximum Wire Diameter.375" (3/8") Maximum Cutoff Length6' Speed Range50 - 250 FPM Lots Of Tooling
                  Categories:
                  Condition:
                  Manufacturer:
                  Location:
                  Price:
                  •  to 
                  <Prev | 461 | 462 | 463 | 464 | 465 | 466 | 467 | 468 | 469 | 470 | Next>