buy & sell, new & used machinery, machine tools & equipment

<Prev | 411 | 412 | 413 | 414 | 415 | 416 | 417 | 418 | 419 | 420 | Next>
Refine: Viewing 8241 - 8260 of 19763 matches
Sort by:
Items Per Page:  20  |  50 |  100
2004 DEERE 250D ENCLOSED CAB W/ A/C & HEAT
$66,500
2004 DEERE 250D ENCLOSED CAB W/ A/C & HEAT
6 CYL JD ENGINE, 4 SPEED TRANS, 6X6, 25 TON, 23.5 R 25 TIRES, ENCLOSED CAB W/ A/C & HEAT, 9834 HOURS SHOWING
3-1/4" MODERN AUTOMATIC CUT OFF MACHINE
$RFQ
3-1/4" MODERN AUTOMATIC CUT OFF MACHINE
3-1/4" MODERN AUTOMATIC CUT OFF MACHINE NEW 2015 BAR CAPACITY ------------------------------ 1/4" TO 3-1/4" O.D. POWER FLEX A.C. FREQUENCY SPINDLE DRIVE --- 15 HP
  • Maximum workpiece diameter: 3.25"
    5000# COILMATE Pallet Uncoiler
    $RFQ
    5000# COILMATE Pallet Uncoiler
    Stock #3678 Model #EZ5048 Serial #4260 Platform Size: 52" Max Stack Height: 30" Width: .5" – 6" ID Range: 15″ – 20" 220V Single PH Stock Thickness Capacity: .062" Equipped w/: Powered Coil Retention Arms, Clockw
    • Maximum weight capacity: 5000Lb
      7500# x 20″ ROWE Single Uncoiler
      $RFQ
      7500# x 20″ ROWE Single Uncoiler
      Stock #3679 Model #7520-DSJ Serial #19450 Capacity: 7500# ID: 16" – 20" Max Width: 20" Max OD: 60" Equipped w/: 4-Arm Manual Expansion, Motor, Electric Brake, 2 Keepers Dimensions: 7′ x 5′ x 5′ Approx Weight: 35
      • Maximum weight capacity: 7500Lb
      • Maximum coil width: 20"
        2012 CATERPILLAR 140M2 VHP W/ ENCOLOSED CAB W/ A/C & HEAT - E7069
        $118,000
        2012 CATERPILLAR 140M2 VHP W/ ENCOLOSED CAB W/ A/C & HEAT - E7069
        6 CYL CAT ENGINE, 8 SPEED TRANS, 14 FT BLADE, 14.00 R 24 TIRES, ENCLOSED CAB W/ A/C & HEAT. SHOWING 6285 HOURS.
        2012 CATERPILLAR 930H W/ ENCLOSED CAB W/ A/C & HEAT
        $78,500
        2012 CATERPILLAR 930H W/ ENCLOSED CAB W/ A/C & HEAT
        6 CYL CAT ENGINE, 98 IN GP BUCKET, 20 R 25 TIRES, THIRD VALVE, ENCLOSED CAB W/ A/C & HEAT
        WILTON MODEL 2380 DIRECT DRIVE ROUND HEAVY DUTY DRILL PRESS, 33"
        $RFQ
        WILTON MODEL 2380 DIRECT DRIVE ROUND HEAVY DUTY DRILL PRESS, 33"
        SPECIFICATIONS CAPACITY: 33” SPINDLE TO COLUMN: 16-1/2” MOTOR: 7.5 HP STEEL DRILLING CAPACITY: 2-3/4” CAST IRON DRILLING CAPACITY: 2-1/8” QUILL DIAMETER: 3.78" SPINDLE SPEEDS (12): 42 – 1,486 RPM SPINDLE
        • Swing: 33"
        • Motor: 7.5HP
          1975 HARDINGE MODEL HLV-H TOOLROOM LATHE, 11" X 18"
          $RFQ
          1975 HARDINGE MODEL HLV-H TOOLROOM LATHE, 11" X 18"
          SPECIFICATIONS SWING OVER BED: 11" SWING OVER CARRIAGE: 9" SWING OVER CROSS SLIDE: 6" DISTANCE BETWEEN CENTERS: 18" SPINDLE NOSE: 5C HARDINGE TAPER NOSE VARIABLE SPINDLE SPEEDS: 125 TO 3000 RP
          • Swing: 11"
          • Centers: 18"
            2004 WASINO MODEL G-07 GANG TOOL CNC LATHE WITH LOADER, 1-1/16"
            $RFQ
            2004 WASINO MODEL G-07 GANG TOOL CNC LATHE WITH LOADER, 1-1/16"
            SPECIFICATIONS SPINDLE BORE: 1-3/4" BAR CAPACITY: 1-1/2" SPINDLE NOSE: 100mm FLAT SPINDLE SPEED, MAXIMUM: 6,000 RPM SPINDLE MOTOR, DUTY RATED: 7.5 HP SPINDLE CENTER HEIGHT: 39-3/8" X-AXIS TRAVEL:
            2005 WASINO G-07 GANG TOOL CNC LATHE WITH GANTRY LOADER & FANUC 21iTB
            $RFQ
            2005 WASINO G-07 GANG TOOL CNC LATHE WITH GANTRY LOADER & FANUC 21iTB
            SPECIFICATIONS SPINDLE BORE: 1-3/4" BAR CAPACITY: 1-1/2" SPINDLE NOSE: 100mm FLAT SPINDLE SPEED, MAXIMUM: 4,000 RPM SPINDLE MOTOR, DUTY RATED: 7.5 HP SPINDLE CENTER HEIGHT: 39-3/8" X-AXIS TRAVEL:
            SHARP MODEL LMV-42 VERTICAL TURRET MILLING MACHINE, 9" X 42"
            $RFQ
            SHARP MODEL LMV-42 VERTICAL TURRET MILLING MACHINE, 9" X 42"
            TABLE OVERALL SIZES: 9" X 42" T SLOT SIZE: 5/8" T SLOTS (3): 2 1/2" CENTERS RANGE LONGITUDINAL TRAVEL (X AXIS): 30" CROSS TRAVEL (Y AXIS): 12" KNEE TRAVEL: 16" QUILL TRAVEL (Z
            • Table width: 9"
            • Table length: 42"
              POWERMATIC MODEL 1200 4-SPINDLE VARIABLE SPEED DRILL, 20
              $RFQ
              POWERMATIC MODEL 1200 4-SPINDLE VARIABLE SPEED DRILL, 20
              SPECIFICATIONS SPINDLES (4): #3MT DRILL TO CENTER OF CIRCLE: 20” THROAT TO COLUMN: 10” QUILL DIAMETER: 2-3/4” SPINDLE TRAVEL: 6" MOTOR: 1.5 HP SPINDLE SPEEDS: 300 – 2,000 RPM GENERAL DIMENSIONS: 86
              • # Spindles: #4
                1973 BRIDGEPORT SERIES I VERTICAL MILL, 9" X 42"
                $RFQ
                1973 BRIDGEPORT SERIES I VERTICAL MILL, 9" X 42"
                SPECIFICATIONS TABLE SIZE: 9" X 42" TABLE TRAVEL: 30" SADDLE TRAVEL CROSS FEED: 12" QUILL TRAVEL DOWN FEED: 5" KNEE TRAVEL: 16" RAM TRAVEL: 12" T-SLOTS #, SIZE: 3, 5/8" X
                • Table width: 9"
                • Table length: 42"
                  2005 CLAUSING COLCHESTER MASCOT 18VS GAP BED ENGINE LATHE, 18” X 60”
                  $RFQ
                  2005 CLAUSING COLCHESTER MASCOT 18VS GAP BED ENGINE LATHE, 18” X 60”
                  SPECIFICATIONS SWING OVER BED: 18.1” SWING OVER GAP: 27.74” SWING OVER CROSS SLIDE: 10.625" DISTANCE BETWEEN CENTERS: 60" WIDTH OF BED: 15.75” HEADSTOCK SPINDLE NOSE: D1-8 CAMLOCK SPINDLE BORE: 3” SPI
                  • Swing: 18"
                  • Centers: 60"
                    1997 CLAUSING COLCHESTER PROFESSIONAL MASTIFF VS GAP BED ENGINE LATHE, 21&q
                    $RFQ
                    1997 CLAUSING COLCHESTER PROFESSIONAL MASTIFF VS GAP BED ENGINE LATHE, 21&q
                    SPECIFICATIONS SWING OVER BED: 21.81” SWING OVER GAP: 32.68” SWING OVER CROSS SLIDE: 14.57" DISTANCE BETWEEN CENTERS: 60" WIDTH OF BED: 15.75” HEADSTOCK SPINDLE NOSE: D1-11 CAMLOCK SPINDLE BORE: 3.54”
                    • Swing: 21"
                    • Centers: 60"
                      1972 JONES & SHIPMAN MODEL 1300 ID/OD CYLINDRICAL GRINDER, 10" x 2
                      $RFQ
                      1972 JONES & SHIPMAN MODEL 1300 ID/OD CYLINDRICAL GRINDER, 10" x 2
                      SPECIFICATIONS MAXIMUM SWING: 10" DISTANCE BETWEEN CENTERS: 27" TABLE SWIVEL INCLUDED ANGLE (CLOCKWISE): 18 DEGREES TABLE SWIVEL INCLUDED ANGLE (ANTICLOCKWISE): 16 DEGREES LONGITUDINAL TABLE SPEED (HY
                      • Swing: 10"
                      • Centers: 27"
                        1973 BRIDGEPORT SERIES I VERTICAL MILL, 9" X 42"
                        $RFQ
                        1973 BRIDGEPORT SERIES I VERTICAL MILL, 9" X 42"
                        SPECIFICATIONS TABLE SIZE: 9" X 42" TABLE TRAVEL: 30" SADDLE TRAVEL CROSS FEED: 12" QUILL TRAVEL DOWN FEED: 5" KNEE TRAVEL: 16" RAM TRAVEL: 12" T-SLOTS #, SIZE: 3, 5/8" X
                        • Table width: 9"
                        • Table length: 42"
                          48" GRAY RINGMASTER CNC VERTICAL TURRET LATHE WITH 5-POSITION TURRET
                          $RFQ
                          48" GRAY RINGMASTER CNC VERTICAL TURRET LATHE WITH 5-POSITION TURRET
                          48" GRAY RINGMASTER CNC VERTICAL TURRET LATHE WITH 5-POSITION TURRET<br /> <br /> New 1973&nbsp;<br /> Rebuilt 1989<br /> <br /> Motor Driven with 75 HP, 3-Phase, 60 Cycle, DC Motor and
                          16.9" AMADA CTB400 CNC VERTICAL CARBIDE BAND SAW
                          $RFQ
                          16.9" AMADA CTB400 CNC VERTICAL CARBIDE BAND SAW
                          <span style="font-size: 14px; background-color: #fefefe; font-family: Roboto, Helvetica, Arial, sans-serif; color: #666666;">16.9" AMADA CTB400 CNC VERTICAL CARBIDE BAND SAW<br /> <br /> New 2008<br
                          2003 CATERPILLLAR D5G XL
                          $43,000
                          2003 CATERPILLLAR D5G XL
                          6 CYL CAT ENGINE, HYDROSTATIC ENGINE, JOYSTICK STEERING, 20 IN PADS, 8 FT 9 IN V PAT BLADE, ENCLOSED CAB W/ A/C & HEAT
                          Categories:
                          Condition:
                          Manufacturer:
                          Location:
                          Price:
                          •  to 
                          <Prev | 411 | 412 | 413 | 414 | 415 | 416 | 417 | 418 | 419 | 420 | Next>