buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Rolls

Metal Rolls for Sale

322 new & used metal rolls items for sale
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 161 - 180 of 322 matches
Sort by:
Items Per Page:  20  |  50 |  100
12' X 1-1/4" BERTSCH BENDING ROLL
WILL DO 1-1/4" STOCK MAX. ROLLS ................ 32" TOP ROLLER ........... 151" BOTTOM ROLERS (2) .... 146" MAIN MOTOR ........... 30 HP 220/440 VOLT 3 PHASE 2 ADDITIONAL MOTORS .. 2 HP V
36" x 22 ga. TIN KNOCKER® Manual Slip Roll
CALL FOR BEST PRICE! FEATURES: Here's "the beef"! Tin Knocker rolls are among the strongest in the industry. Precision machined and ground from high carbon steel, these rolls come with wiring grooves, e
72" x 16 ga., NATIONAL, No. NR7216, powered, 4" rolls, 1 HP, New
OPTIONAL ACCESSORIES: Wire groove, 3/8", 1/2" or 5/8" . . . . . . . . . . . . . . . . . . $ 680.00 FEATURES: National's 4" power rolls are designed for simple operation. Standard with forward a
61" x 10 ga., GMC, #PBR-0510E, initial pinch, NEW
OPTIONAL ACCESSORIES: Cone attachment (to make cone shaped parts) . . . . . . . . . . . . $ INC Three (3) grooves; 3/8", 1/2" and 5/8" on roll for bending wire . . INC EQUIPPED WITH: LED
ERCOLINA, 2.5" x 2.5" x 1/4", CE50H3, hydraulic, 3 rolls driven, 2.5 HP mot
OPTIONAL ACCESSORIES: Angle iron twist correction device. . . . . . . . . . . . . . . 1,400.00 Tie bar assembly. . . . . . . . . . . . . . . . . . . . . . . . 650.00 Large spiral bending attachment . . . . . .
10 TON (EST) SET OF TANK TURNING ROLLS W/DRIVER & IDLER ROLLS,RUBBER COVERED
RUBBER COVERED ROLLS ON DRIVEN AND IDLER STANDS. CENTER TO CENTER WHEEL DISTANCES - 39" TO 68-1/2" WHEEL SIZE - (3) 12" DIAMETER X 4" WIDE ROLLS (OVERALL WIDTH - 13") CAPACITY ..........
12' X 1 1/2" WEBB #24L INITIAL TYPE BENDING ROLL
3 MOTOR MACHINE INITIAL PINCH TYPE MANUFACTURER ......... WEBB MODEL # .............. 24L MAX CAPACITY ......... 1-1/2" X 12'
1-3/8" X 10' ROUNDO HYDRAULIC DOUBLE PINCH PLATE ROLL #PS500/10
SPECIFICATIONS: 1-3/8" X 10' ROUNDO HYDRAULIC DOUBLE PINCH PLATE ROLL RATED BENDING CAPACITY 1-3/8" X 10' CAPACITY (ROLLING OVER 120" DIAMETER) . 1-5/8" X 10' PRE-BENDING
4' x 3" LOWN MODEL #B-300 BENDING ROLL
ROLLS ................... 4' LONG x 3" DIAMETER MAXIMUM CAPACITY ........ 16-18 GAUGE EQUIPPED WITH: MANUAL DROP END FOOT PEDAL ACTIVATION MOTOR DATA: 1 HP, 208-220/440V, 3PH, 60CYC, 1735 RPM WITH CONTROL
MARSHALL-RICHARDS DOUBLE HOUSING TYPE FORGING ROLLS
Diameter of Forging Dies 6" Width of Roll Dies 6" Press set up to receive flat back segmental dies Equipped with: Roll Shaft Extensions for operation Die Mounting of Overhanging Rolls Air Clutch
AJAX MODEL #6 FORGING ROLL
Width of Roll dies ................................. 60" Maximum roll die dia. .............................. 44" Maximum Length rolled section ...................... 82" Weight, approx. ...............
BUFFALO #1 HORZONTAL BENDING ROLLS
MANUAL HEIGHT ADJUSTMENT OF UPPER ROLL MANUAL VERTICAL & LATERAL ADJUSTMENT OF GUIDE ROLLS FOUR SET OF ANGLE ROLLS MISCELANEOUS SPACE PLATES FOUR SET OD RADIOUS ROLLS 10 HP MOTOR, WIRED 3 PHASE, 60 CYCLE, 220 VOLTS
10" X 2.5" COIL PINCH ROLL w/TOP-BOTTOM SUPPORT
WITH TOP/BOTTOM COIL SUPPORT PEELER TABLE ROLL SIZE ......... 6"DIA X 10"WIDE BELLY ROLLS ....... 10"W X 2-1/2 DIA BOTTOM ROLL DRIVER TOP ROLL HOLD DOWN SIDE GUIDES DRIVEN BY AC MOTOR EQUIPPED
New Tennsmith Slip Roll   Model SR24
New Tennsmith Slip Roll Model SR24 Bending Length .............. 24" Diameter Rolls .............. 2" Wire Grooves: 3/16, 1/4, 5/16" Shipping Weight: 190 lbs. Note - Stand is
  • Length: 24"
    Hauesler 4-Roll Double Pinch Hydraulic Plate Roll   Model VRM-HY-L 2100 x 1
    Hauesler 4-Roll Double Pinch Hydraulic Plate Roll Model VRM-HY-L 2100 x 10 New 1975 Capacity........................... 3/8" x 7 ft ft. (Mild Steel) Roll Diameter (Upper & Lower) ..... 11.03&
    20 ton Aronson Tank Turning Rolls Model WRD-20
    Size: 20 ton Manufacturer: Aronson Model: WRD-20 List Price: $7,950 Specifications: Capacity 20,000 lbs. Capacity with idler 20 tons Height floor to top of roller 34"
    • Tonnage: 20000T
      BAILEIGH Manual Roll Bender R-M10
      CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: Since Baileigh introduced the R-M10 in 2004, this ring roller has proved it does almost everything larger roll benders can—for a fraction of the price. Maxim
      BAILEIGH Plate Bending Machine PR-10500-4NC
      CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: PR-10500-4NC numerically controlled four roll plate bending machine is the next step in production plate rolling. This 10 foot 1/2” mild steel machine features a ne
      BAILEIGH Four Roll Plate Bending Machine PR-10500-4
      CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: The PR-10500-4 four roll plate bending machine has been refined over the years through extensive research and development and is considered one of the finest plate ro
      150 Ton Aronson Tank Turning Roll
      Reference #23674 150 Ton Aronson WRD-150 Tank Turning Roll Age: 1980 FEATURES: Pendant Control W/New AC Variable Speed Control CAPACITY: Max. Turning Capacity W/ 1 Idler ...... 150 Ton Max. Load Capaci
      • Tonnage: 150T
        Related Subcategories:
        Condition:
        Price:
        •  to 
        1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>