buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Drills & Tapping Machinery

Drills & Tapping Machinery for Sale

363 new & used drills & tapping machinery items for sale
<Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19
Refine: Viewing 301 - 320 of 363 matches
Sort by:
Items Per Page:  20  |  50 |  100
2 SPDL, No. 869, ROCKWELL/DELTA,**Was machine 1947**
$RFQ
2 SPDL, No. 869, ROCKWELL/DELTA,**Was machine 1947**
EQUIPPED WITH: Jacobs Chuck 230/460/3 Phase 60 Cycle SPECIFICATIONS: Throat: 8" Bottom of Spindle to Table: 24" Table Size: 24" x 65" Distance Between Spindles: 36" Spindle Trav
24", SOLBERGA No. SE7, geared head, 1.5/1.2 HP, #3MT, auto. feed
$RFQ
24", SOLBERGA No. SE7, geared head, 1.5/1.2 HP, #3MT, auto. feed
SPECIFICATIONS: Drilling capacity--mild steel 1" --cast iron 1-1/4" Column diameter 4-5/16" Center of spindle to column 12"
15", ROCKWELL, Model 65-000, belt, 1/2" capacity, 1/2 HP
$RFQ
15", ROCKWELL, Model 65-000, belt, 1/2" capacity, 1/2 HP
SPECIFICATIONS: Drilling capacity--cast iron 1/2" Center of spindle to column 7-1/2" Spindle speeds--number 5 --range 400 to 5400 rp
36" x 9" IKEDA MODEL RMS-9 RADIAL ARM DRILL PRESS
$RFQ
36" x 9" IKEDA MODEL RMS-9 RADIAL ARM DRILL PRESS
IKEDA MODEL RMS-9 36" X 9" RADIAL ARM DRILL PRESS MANUFACTURED 1985 RACO Stock Number R017185 MAX. DISTANCE, COLUMN TO SPINDLE CENTER ------ 36" MIN. DISTANCE, COLUMN TO SPINDLE CENTER ------ 12&qu
  • Arm length: 3'
  • Column diameter: 9"
    Saber RF19VTM Milling Machine
    $RFQ
    Saber RF19VTM Milling Machine
    • Variable-speed 0-2000rpm • Tapping w/ forward & reverse • LED read-out of spindle RPM • High torque at all speeds • Massive diameter quill provides high rigidity • Positive depth stop for quick and easy adjust
    • Maximum diameter hole tapped: 0.625"
      Rockwell/Delta Drill, Model: 15-655, SN: 1654715
      $1,500
      Rockwell/Delta Drill, Model: 15-655, SN: 1654715
      Volt 460 HP ¾ PH 3 RPM 1725 Speeds 8 (450-4700) Swing 15”
      Fosdick 5” X 13” Radar Arm Drill
      $3,850
      Fosdick 5” X 13” Radar Arm Drill
      L Base w/ 2 Box Table Spindle 20 – 1406 36 RPM Speeds
      Powermatic Drill Model 1200
      $1,800
      Powermatic Drill Model 1200
      General Specifications: Drill speed 300-1800 Condition: Good Price: F.O.B.Rochester “as-inspected” $ 1,800
      Johansson Radial Arm Drill
      $5,800
      Johansson Radial Arm Drill
      Specification: T- Slot Volt 440 HP
      American Hole Wizard, Radar Arm Drill
      $4,200
      American Hole Wizard, Radar Arm Drill
      General Specifications: 9” x 4 Ft Spindle speed 12 speeds (50 1500) Down feed 6 speeds (.007 - .018”) per revolution
      BIRMINGHAM Radial Arm Drill Press
      $RFQ
      BIRMINGHAM Radial Arm Drill Press
      TPR-720 TPR-820 TPR-920 TPR-1100 TPR-1230 Column Diameter 8.25" [210mm] 8.25" [210mm] 8.25" [210mm] 10.25" [260mm] 11.81" [300mm] Column to spindle-max
      JET Radial Arm Drill Press
      $RFQ
      JET Radial Arm Drill Press
      The power train gears and spline shaft are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads The spindle is made of the finest case hardene
      Rong Fu RF-45 Geared Head Drill-Mill
      $RFQ
      Rong Fu RF-45 Geared Head Drill-Mill
      • Extra heavy duty square column design • Head tilts 90° left and 45° right • Motor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase • 5 speed spindle: 60, 130, 230, 450, 1500 rpm • Spindle Taper : R8
      Rong Fu RF-40 Geared Head Drill-Mill
      $RFQ
      Rong Fu RF-40 Geared Head Drill-Mill
      • Head tilts 90° left and 45° right and swivels • Motor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase • 5 speed spindle: 60, 130, 230, 450, 1500 rpm • Spindle Taper : R8 • Spindle/Quill Travel: 5-1
      Rong Fu RF-35 Radial Drill
      $RFQ
      Rong Fu RF-35 Radial Drill
      • Motor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase • 5 speed spindle: 340, 660, 1060, 1665, 3000 rpm • Spindle Taper : MT3 • Spindle travel: 5" • Spindle horizontal travel: 14.87" • Spinde to t
      Rong Fu RF-31 Mill-Drill
      $RFQ
      Rong Fu RF-31 Mill-Drill
      • Motor: 2HP, 1 phase 110 volt or 220 volt or 3 phase 220 volt • Spindle Speeds: (12) 120 to 2500 rpm • Spindle Taper : R8 • Spindle/Quill Travel: 5-1/8" • Spindle to column: 5-1/2" • Working Table: 8.25&q
      JET model J-A2608M-PF2 20" Geared Head Drill Press with Powerfeed
      $RFQ
      JET model J-A2608M-PF2 20" Geared Head Drill Press with Powerfeed
      • Motor 1 & 1.5 HP, 220 Volts, 3 phase • Spindle speeds(8) (RPM) Low-130, 260, 420, 840; High-535, 1070, 1745, 3480 • Spindle Taper MT-3 • Quill Diameter (in.) 2-3/8 • Max Distance Spindle to Table ( in.) 35-5/8
      JET model J-2360 20" Geared Head Drilling & Tapping Press with pow
      $RFQ
      JET model J-2360 20" Geared Head Drilling & Tapping Press with pow
      • Motor 4 HP, 230/460V, 3 phase, Prewired 230V. • Spindle speeds(9)(RPM) 55, 98, 156, 198, 346, 456, 576, 822, 1338 • Spindle Taper MT-4 • Quill Diameter (in.) 3.465 • Max Distance Spindle to Table ( in.) 30-1/2 • T
      JET model GHD-20PFT 20" Geared Head Drill Press with power downfeed
      $RFQ
      JET model GHD-20PFT 20" Geared Head Drill Press with power downfeed
      • Motor 2HP, 230V, 3 phase, 2-speed • Spindle speeds(12) (RPM) 120, 260, 460, 900, 1600, 3000, 60, 130, 230, 450, 800, 1500 • Spindle Taper MT-3 • Quill Diameter (in.) 3 • Max Distance Spindle to Table ( in.) 30-1/2
      JET model GHD-20T 20" Geared Head Drill Press
      $RFQ
      JET model GHD-20T 20" Geared Head Drill Press
      • Motor 2HP, 230V, 3 phase, 2-speed • Spindle speeds(12): (RPM) 120, 260, 460, 900, 1600, 3000, 60, 130, 230, 450, 800, 1500 • Spindle Taper MT-3 • Quill Diameter (in.) 3 • Max Distance Spindle to Table ( in.) 30-1/2
      Related Subcategories:
      Categories:
      Condition:
      Manufacturer:
      Location:
      Price:
      •  to 
      <Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19