Machine Sales – Buy or Sell New and Used Machinery and Machine Tools at Machine Sales

$RFQ

Make: Tru-Tek, Model: 20-26R, New in 2007, Left to Right, 18 Stands, 12″ Roll Space, 10″ Horizontal Center, 5″-7″ Vertical Center, 20:1 Ratio, 3.75″ Shaft Key, 30HP Motor. Mandrel Uncoiler, Coil Straightener, Pre-Punchin

West Bloomfield, MI
View Listing

US Baird Model #1 Four Slide

$RFQ

No description providedDiameter3/32" Strip Width3/4" Standard Feed Length6-3/8" Motor1 HP

Ivyland, PA
View Listing

1/16" Nilson 1B Oscillating Wire Straightener

$RFQ

No description providedWire Diameter Range,020" - .050" Maximum Oscillation4" Number of Blocks10 Motor1 HP Single Oscillating Arbor

Ivyland, PA
View Listing

1/16" Nilson 1B Oscillating Wire Straightener

$RFQ

No description providedWire Diameter Range.020" - .050" Maximum Oscillation4" Number of Blocks10 Motor1 HP Single Oscillating Arbor

Ivyland, PA
View Listing

1-1/4" Manville Flat Die Model 1000-C Hand Feed Thread Roller

$RFQ

No description providedMaximum Thread Diameter1-1/4" Depth of Die Pockets6-1/8" Strokes Per MinuteApprox. 40 Length of Moving Die20" Length of Stationary Die19" Distance Between Top of Die Block & Bottom of Tie Rod8-

Maximum workpiece diameter: 1.25"
Maximum workpiece diameter: 1.25"

Ivyland, PA
View Listing

1/8" Shuster 18SFT Dual Arbor Wire Straightener

$RFQ

No description providedHigh Tensile Capacity.030" - .080" Mild Steel Capacitiy.040" - .135" Speed Range25 - 150 FPM Electrics240V With Allen Bradley Powerflex 4 Drives

Ivyland, PA
View Listing

3/16" Shuster 32SF1 Dual Arbor Wire Straightener

$RFQ

No description providedWire Range.062" - .187" Speed Range25 to 200 FPM With Allen Bradley Power Flex 4 Drives, Dual Arbor, & on Casters

Ivyland, PA
View Listing

Kwickway surface grinder

$1,000

Kwickway 855-5 Resurfaces flywheels and cylinder heads. Decks engine blocks. Used 2 years, in storage for 25.

Plainwell, MI
View Listing

Kwickway shot blast machine

$2,000

Kwickway shat blast machine with vacuum system. Use for two years then in storage for25 years.

Plainwell, MI
View Listing

2010 Mazak QTN 450-II

$11,000

Specifications Chuck Size 18" 3 Jaw Air Chk Maximum Swing 33.26" Maximum Cutting Diameter/Shaftwork 22.83" / 18.25" Center Distance 43.55" Maximum Bar Capacity 7.23" X-Axis Travel 13.3

HARTLEPOOL,
View Listing

2011 MAZAK QTN-350-II M

$13,000

MAX SIWING ........................... 29.5" SWING OVER CARRIAGE .................. 20.87" MAX. MACHINING DIAMETER .............. 16.54" MAX. MACHINING LENGTH ................ 60.71" BAR WORK CAPA

Swing: 29.5"

HARTLEPOOL,
View Listing

2008 MAZAK NEXUS QTN-100 II

$8,000

MAXIMUM SWING........................... 21.65" SWING OVER CARRIAGE..................... 11" MAX MACHINING DIAMETER.................. 11" MAX MACHINING LENGTH.................... 11.2" BAR WORK CA

Swing: 21.65"

HARTLEPOOL,
View Listing

2012 DOOSAN-PUMA 400MB

$26,000

Specifications Maximum Swing: 24" Maximum Turning Diameter: 14.75" Maximum Turning Length: 21.7" Hole in Spindle: 2.5" Bar Capacity: 3" (3.15" Hole) Maximum Spindle Speed: 4,000 RPM T

Swing: 24"

HARTLEPOOL,
View Listing

2012 MORI SEIKI NLX2500 SY/700

$35,000

TECHNICAL DETAILS - Number of spindles : 2 - Number of turrets : 1 - Number of axes : 6 MAIN SPINDLE - Spindle nose : A2-8 - Max. bar diameter : 80 [mm] - Spindle power : 18,5 [kW] - Spindle speeds : 4.000 [rpm]

Swing: 12"
Centers: 12"

HARTLEPOOL,
View Listing

2008 HAAS VF-9/50 VERTICAL MACHINING CENTER

$8,400

TABLE SIZE .................... 36" X 84" MAX WEIGHT ON TABLE ........... 4000 LBS X-AXIS TRAVEL ................. 84" Y-AXIS TRAVEL ................. 40" Z-AXIS TRVAEL ................. 30"

X axis: 84"
Y axis: 40"

HARTLEPOOL,
View Listing

2.75″ CUSTOM Flying Cut Off Saw

$RFQ

Max Part Dimensions: 2.75" x 2.75" Blade Dia: 10" Travel: 2′ 10" Direction: Right-Left EQUIPPED WITH: 12′ Dump Table with Target (pneumatic operation) 1/3 HP Motor 240/3/60 Electrical Controls Push Buttons D

Perrysburg, OH
View Listing

2010 DOOSAN-PUMA 300LC

$11,900

SWING OVER BED ....................... 23.2" SWING OVER CARRIAGE .................. 17.7" DISTANCE BETWEEN CENTERS ............. 52.8" MAX. TURNING DIAMETER ................ 15.7" MAX. TURNING LEN

HARTLEPOOL,
View Listing

2008 HAAS VF-3SS Four-Axis CNC VMC

$9,900

Table working surface 18" x 48" Table travel, X-axis (longitudinal) 40" Table travel, Y-axis (cross) 20" Vertical column travel (Z-axis) 25" Minimum/Maximum distance, spindle nose

X axis: 40"
Y axis: 20"

HARTLEPOOL,
View Listing

2010 DOOSAN LYNX 220LMA

$15,000

SPECIFICATIONS: Chuck Size............................................... 6" Max Diameter Bar Capacity...................... 2" Max Swing Over Bed / Carriage............... 23.2" / 6.7" Max T

Swing: 24"
Centers: 10"

HARTLEPOOL,
View Listing

2007 HAAS VF-2B VERTICAL MACHINING CENTER

$7,500

HAAS VF-2B 3-AXIS VMC Specifications: Table size ...................... 36" X 14" Max Table load .................. 3,000 lBS x Travel ........................ 30" Y Travel ........................

X axis: 30"
Y axis: 16"

HARTLEPOOL,
View Listing

2010 MAZAK QUICK TURN NEXUS 200-II

$10,900

Specifications: MAXIMUM SWING.......................... 24.02" SWING OVER CARRIAGE.................... 13.78" MAXIMUM MACHINING LENGTH............... 20.16" SPINDLE BORE / BAR WORK CAPACITY....... 3&qu

Swing: 24.02"

HARTLEPOOL,
View Listing

HAAS SL-20T CNC LATHE

$18,950

CHIP AUGER, TAILSTOCK, RIGID TAPPING, FLOPPY DISK

THOUSAND OAKS, CA
View Listing

HAAS SL-30T CNC LATHE

$19,950

CHIP CONVEYOR, FLOPPY DISK, RIGID TAPPING

THOUSAND OAKS, CA
View Listing

10" TSUDAKOMA HORIZ/VERT CNC ROTARY TABLE Model: RNCM-251L, New 1994

$RFQ

10" TSUDAKOMA HORIZ/VERT CNC ROTARY TABLE Model: RNCM-251L, New 1994, S/N 9400088 Stock# K14300 TABLE DESCRIPTION: This Horizontal or Vertical Mount CNC Rotary Table was Designed for Full Contour Milling

Diameter or width: 9.84"

Cincinnati, OH
View Listing

25" X 80" TOOLMEX ( WAFUM ) ENGINE LATHE, MODEL TUR630M

$RFQ

25" X 80" TOOLMEX ( WAFUM ) ENGINE LATHE MODEL TUR630M S/N 48485 NEW 1990 SWING OVER BED ------------------------------- 24.8" SWING OVER CROSS SLIDE ------

Swing: 25"
Centers: 80"

Des Plaines, IL
View Listing

CURRENT CT-300 FAST HOLE EDM

$24,500

24 ATC, EBBCO FILTRATION SYSTEM, 24 ELECTRODE HOLDERS, PICKUP SEQUENCER, SUBMERGED. X-12" Y-8" Z-16" W-10" UNDER POWER & RUNNING

X axis travel: 12"
Y axis travel: 8"

THOUSAND OAKS, CA
View Listing

MONARCH 10EE TOOL ROOM LATHE

$5,950

ASSORTED TOOLING & 2 CHUCKS, 440VOLTS

Swing: 12.5"
Centers: 20"

THOUSAND OAKS, CA
View Listing

HANKOOK NSD MAX SD-75-76 EDM

$23,950

5 KVA, X-25.6" Y-17.7" (LOW HOURS) 220V/3PH/60AMP

THOUSAND OAKS, CA
View Listing

DOOSAN DAEWOO LYNX 220LC CNC LATHE

$25,500

FANUC Oi-TC CONTROL, 4000 RPM, 8" CHUCK, 2.5' SPINDLE HOLE

THOUSAND OAKS, CA
View Listing

Stainless Steel Belt Sander In Good Condition

$34,955

Timesavers International, B.V. MODEL 252-3-CMW, S/N 23109 Manufactured 1994: 52” WIDE Belt Size: 52” W X 75” L Bed Opening: 0 – 8” Speeds approximately: 15 – 45 FPM Motor: 30 HP, 1746 RPM. 440V Weight appr

Kansas City, MO
View Listing

CLAUSING COLCHESTER STORM A50 CNC LATHE

$15,950

FANUC 21i-T CONTROL, 6-5/8" CHUCK, STORM MBF 1000 BARFEEDER, 14 TOOL HOLDERS, 12 STATION TURRET, SUPER CLEAN MACHINE, UNDER POWER & RUNNING

THOUSAND OAKS, CA
View Listing

6000 LB. DURANT HD-672-U PLAIN COILING REEL

$RFQ

6000 LB. DURANT HD-672-U HEAVY DUTY PLAIN UNCOILING REEL New 2001 EQUIPPED WITH:  Drag Brake, Hydraulic Expansion, Hold Down Arm, SPECIF

Bannockburn, IL
View Listing

2009 Golden Sun TMU 5-Axis CNC Trunion Table

$8,500

Specifications: Platter Diameter ................................................................ 8" Max Weight on Platter ................................................ 200 lbs Part Swing (max) ...............

Work surface diameter: 8"

Schaumburg, IL
View Listing

9” x 42” Millport Vertical Turret Miller, Model: 2 SN: 810522

$3,250

9” x 42” Millport Vertical Turret Miller, Model: 2 SN: 810522 Specifications: Table: 9” x 42” Variable speeds: 60-4250 Manual Lub, R-8 Spindle Servo Power Table Feed Equipped With: Condition: Go

Rochester, NY
View Listing

Alliant Model #RT-2 Vertical Milling Machine, Variable Speed, 9” x 42”

$7,200

Alliant Model #RT-2 Vertical Milling Machine, Variable Speed, 9” x 42” table SN :760679472 Specifications: Variable speed: 60- 4500 Tool Holder Coolant Kurt Style Vise New DRO New Power Table Feed R-8 Spind

Rochester, NY
View Listing

Pexto 36” x 22” Gage, Power Sheet Rolls, Model: 381 SN: J1851

$1,850

Pexto 36” x 22” Gage, Power Sheet Rolls, Model: 381 SN: J1851 Specifications: Roller machined for round bars up to 3/8” diameter Volt: 220, Hp: 1/3 Equipped With: Braking Caster frame for easy moving Con

Rochester, NY
View Listing

KO Lee 6” X 12” Manual Surface Grinder, Parts #S714 SN: 16817 GA

$2,200

KO Lee 6” X 12” Manual Surface Grinder, Parts #S714 SN: 16817 GA Specifications: Walker Ceramax Mag. Chuck Volt: 230\460, Ph 3, RPM: 3450 1 Horse Power Spindle Motor Equipped With: Condition: Good C

Rochester, NY
View Listing

Arboga Maskiner Drill Press, Type: GM 3508 SN: 151850

$1,850

Arboga Maskiner Drill Press, Type: GM 3508 SN: 151850 Specifications: Volt: 220, Ph: 3, Cycle: 60, Hp: 3.0/2.0, AMP: 8.0/6.0 3 Horse (approx.) Spindle Speed 50, 130, 175, 460 6” Sindle Travel 4 Morse Taper Spi

Rochester, NY
View Listing

Blower Dust Collector, SECO- M-UFO-102B SN: 00181

$1,200

Blower Dust Collector, SECO- M-UFO-102B SN: 00181 Specifications: Horse Power: 3’Volt: 220/440 Ph: 3 Equipped With: Condition: Good Can be demonstrated under power. Price: F.O.B. Rochester ”

Rochester, NY
View Listing

Simpson, Model: 83, Eyelet & Grommet Attaching Machine SN: 1213

$2,650

Simpson, Model: 83, Eyelet & Grommet Attaching Machine SN: 1213 Specifications: 50-60 Air Pressure PSI Volt: 115 Equipped With: Condition: Good Can be demonstrated under power. Price: F.

Rochester, NY
View Listing

Hardinge DV-59, SN: DV-59-11587

$6,400

Hardinge DV-59, SN: DV-59-11587 Specifications: Variable speed XY tool compound Tailstock Equipped With: 52 5C collets 5 face plates 5” 3-jaw chuck 5” 4-jaw chuck 7 oversized collets Preci

Rochester, NY
View Listing

MITSUI SEIKI VS-5A

$19,500

FANUC 11M, TSUDAKOMA FULL 4TH AXIS 12" ROTARY TABLE, 50 TAPER, GLASS SCALES, 20 HP, CHIP CONVEYOR, 4500 RPM, UNDER POWER & RUNNING

X axis: 42.5"
Y axis: 24"

THOUSAND OAKS, CA
View Listing

MORI SEIKI MV-65

$29,500

TSUDAKOMA 4TH & 5TH AXIS ROTARY TABLE, FANUC 11M, 30 ATC, CAT-50 TAPER, ASSORTED TOOLING, 15 HP, 6000 RPM, UNDER POWER & RUNNING

X axis: 60"
Y axis: 25.6"

THOUSAND OAKS, CA
View Listing

Used Clausing Model 1632 4 Spindle Drill Press 15 inch

$1,200

4 spindle--- 3 Model #1632 Drilling 1725 RPM 400/5400 RPM 1 Model # 1654 Tapping 1140 RPM 260/3600 RPM Single Phase Unit Production Table Call for more info.

# Spindles: #4

Northwood, OH
View Listing

BUTLER-ELGAMILL #T BED TYPE UNIVERSAL HEAD VERTICAL MILL

$RFQ

BUTLER-ELGAMILL #T BED TYPE UNIVERSAL HEAD VERTICAL MILL MODEL T S/N 0027810/A NEW 1975 TABLE SIZE -------------------------------------- 29.5" X 8

Table width: 29.5"
Table length: 84.5"

Des Plaines, IL
View Listing

Tru Turn 80.31" x 236" Manual Lathe, Brand New

$RFQ

Reference #25249 Tru Turn 80.31" x 236" Manual Lathe, Brand New Model: Heavy Duty CAPACITY: Swing Over Bed ....................... 80.31" Swing Over Cross Slide ............... 64.96" Widt

Swing: 80.31"
Centers: 236.22"

Melville, NY
View Listing

NEW CLAUSING # 2274 20" VARIABLE SPEED FLOOR DRILL PRESS

$4,770

NEW CLAUSING # 2274 20" VARIABLE SPEED FLOOR DRILL PRESS Make: CLAUSING Model #: 2274 Condition: NEW All specifications are approximations, and are subject to verification. Standard Features 3-Phase 300

Chino, CA
View Listing

FADAL VMC 8030

$38,600

UNDER POWER & RUNNING, ONLY 1555 CUTTING HOURS, 10,000 RPM

X axis: 80"
Y axis: 30"

THOUSAND OAKS, CA
View Listing

BROWN& SHARPE ORYZO CMM

$29,500

DRO,X-157, Y-144, Z-144

X axis measuring range: 144"
Y axis measuring range: 144"

THOUSAND OAKS, CA
View Listing

MORI SEIKI MV-JUNIOR CNC VMC

$16,200

MORI SEIKI MV-JUNIOR CNC VMC Make: Mori Seiki Model #: MV-Junior Year: 1993 Serial #: 4030 Condition: Very Good All specifications are approximations, and are subject to verification. ““This One Owner machin

X axis: 22"
Y axis: 16.1"

Chino, CA
View Listing

SHEFFIELD MICRO-FORM GRINDER

$9,950

SONY DRO, ASSORTED WHEEL HUBS, VORTEC DUST COLLECTOR

THOUSAND OAKS, CA
View Listing

100 TON ALKANO LTD. HEAVY DUTY HYDRAULIC H FRAME PRESS

$RFQ

100 TON ALKANO LTD. HEAVY DUTY HYDRAULIC H FRAME PRESS MODEL H010 S/N 0012 CAPACITY ------------------------------------ 100 TONS RAM DIAMETER ------------------------------

Tonnage: 100T
Stroke: 16"

Des Plaines, IL
View Listing

SUPERMAX YCM-12 9X50 CNC VERTICAL MILLING

$5,400

SUPERMAX YCM-12 9X50 CNC VERTICAL MILLING Make: SUPERMAX Model #: YCM-12 Condition: Used SUPERMAX YCM-12 9X50 Features: Anilam Crusader 3 Axis CNC Control SUPERMAX YCM-12 9X50 Specifications: Table:

Chino, CA
View Listing

Craven 127" x 360" Heavy Duty 4-Axis CNC Lathe

$RFQ

Reference #28376 Craven 127" x 360" Heavy Duty 4-Axis CNC Lathe FEATURES: Fanuc 0i-TC CNC Control (Retrofitted 2010) 4-Way Bed Construction 2-Carriages 20.5" Head & Tailstock Risers New Ro

Swing: 127"
Centers: 360"

Melville, NY
View Listing

2006 JOHN DEERE 700J XLT DOZER

$64,500

6 CYL JD ENGINE, HYDRO-STATIC TRANS W/ JOYSTICK STEERING, 22 IN PADS, 6-WAY BLADE (10 FT 1 IN WIDE), ENCLOSED CAB W/ A/C & HEAT, 7731 HRS SHOWING

Sutherlin, VA
View Listing

20 TON TRUMPF TRUPUNCH 3000 CNC ELECTRIC PUNCHING MACHINE 50" X 100&qu

$RFQ

20 TON TRUMPF TRUPUNCH 3000 CNC ELECTRIC PUNCHING MACHINE 50" X 100", MFG:2011

Tonnage: 20T

NEW CITY, NY
View Listing

50 TON METAL MUNCHER HYDRAULIC PRESS, MODEL GB50

$RFQ

50 TON METAL MUNCHER HYDRAULIC PRESS MODEL GB50 S/N 21151088 NEW 1988 THROAT DEPTH ---------------------------------- 9" OPENING IN BED -------------------------------- 4-1/

Tonnage: 50T
Stroke: 10"

Des Plaines, IL
View Listing

HYUNDAI L300A CNC LATHE

$89,500

FANUC CNC CONTROL, 10" CHUCK, TOOLING, 3500 RPM, 30 HP, LESS THEN 400 HOURS, CHIP CONVEYOR

THOUSAND OAKS, CA
View Listing

K O LEE SURFACE GRINDER

$1,450

6" X 18"

THOUSAND OAKS, CA
View Listing

LAGUN MODEL FTV-1S RAM TYPE VERTICAL MILL. MODEL FTV-1S

$RFQ

LAGUN MODEL FTV-1S RAM TYPE VERTICAL MILL MODEL FTV-1S S/N SE23989 NEW 1986 TABLE SIZE ------------------------------------- 10" X 44" TABLE TRAVEL ---- ( LONGIT

Table width: 10"
Table length: 44"

Des Plaines, IL
View Listing

Liebherr L 2400 Vertical Gear Hobber

$RFQ

Type L 2400, max. wheel diameter 2500 mm max. module 25 spindle turning speed range 15 - 150 U/min faceplate diameter 1500 mm total power requirement 60 kW weight of the machine ca. 37 t

Wolbrom,
View Listing

TREE VMC-1050

$6,950

40X20X22, 24 ATC, 15 HP, 8000 RPM, YASNAC CNC CONTROL, UNDER POWER, ORIGINAL OWNER

X axis: 40"
Y axis: 20"

THOUSAND OAKS, CA
View Listing

2000 CHEVALIER MODEL FM-3VS VERTICAL MILL, 9” X 48”

$RFQ

SPECIFICATIONS TABLE SIZE: 9” X 48” T-SLOT NUMBER & SIZE: 3 AND 5/8” WORK PIECE WEIGHT: 750 LBS TRAVELS X-AXIS: 30” Y-AXIS: 12” Z-AXIS: 16” RAM TRAVEL: 12” SPINDLE TAPER: R-8 SPEEDS (VARIABLE)

Table width: 48"
Table length: 9"

Bethlehem, PA
View Listing

3/16" Hartford A-190-M #0 Hand Feed Flat Die Thread Roller

$RFQ

No description providedThread Length Capacity1/8" to 1-1/2" Screw Diameter Capacity#0 thru #10 Die Pocket Depth1-5/8" Maximum Speed175 PPM Motor3 HP Approx. Floor Size4' x 5' Approx. Weight1,600 lbs

Maximum workpiece diameter: 1.5"
Maximum thread length: 1.5"

Ivyland, PA
View Listing

3/16" Hartford A-190-HM #0 Hand Feed Flat Die Thread Roller

$RFQ

No description providedThread Length Capacity1/8" to 1-1/2" Screw Diameter Capacity#0 thru #10 Motor3 HP Maximum Speed175 PPM Approx. Floor Size4' x 5' Approx. Weight1,600 lbs

Maximum workpiece diameter: 1.5"
Maximum thread length: 1.5"

Ivyland, PA
View Listing

3/16" Hartford A-190-M #0 Hand Feed Flat Die Thread Roller

$RFQ

No description providedScrew Diameter Capacity#0 thru #10 Thread Length Capacity1/8" to 1-1/2" Die Pocket Depth1-5/8" Maximum Speed Range175 PPM Motor3 HP Approx. Weight1,600 lbs Approx. Floor Size4' x 5'

Maximum workpiece diameter: 1.5"
Maximum thread length: 1.5"

Ivyland, PA
View Listing

Dexter 4 Stand Roll Former

$RFQ

Dexter 4 Stand Roll Former S/N: R-3111, Stock No: 17957 Diameter Shafts: 2.125" Roll Space: 5" Horizontal Centers: 9" Vertical Adjustment: 2" Currently Tooled for 15" Corvette Wheel Trim

# Stands: #4
Roll diameter: 2.125"

Nashville, TN
View Listing

HAITIAN INJECTION MOLDING PRESS

$89,500

259 TON, 11 OZ, SIGMATEK CNC CONTROL, 36.6" X 34.6" PLATEN,MADE IN KOREA

Clamping force: 259T
Shot size: 11Oz

THOUSAND OAKS, CA
View Listing

Sendzimir ZR 23-37 Reversing Cold Rolling Mill

$RFQ

Make: Sendzimir Model: ZR-23-37 Material Type: Stainless Steel, High Carbon, Brass Mill Direction: Reversing Material Width: 18.5" (470mm) - 37" (940mm) Coil ID: 20" (508mm) - 24" (610mm) Co

West Bloomfield, MI
View Listing

42" X 48" X 264 FUTURMILL/INGERSOLL DOUBLE HOUSING PLANER MILL

$RFQ

42" X 48" X 264 FUTURMILL/INGERSOLL DOUBLE HOUSING PLANER MILL FUTURMILL CONVERSION OF INGERSOLL MACHINE, INCLUDING MILLING HEADS, DRIVES, ELECTRICS & CONTROLS

Distance between houses: 52"

Des Plaines, IL
View Listing

Amada RG 50

$24,000

QUOTATION ONE (1) Re-Manufactured U.S. AMADA RG 50 PRESS BRAKE WITH NC9EX TECHNICAL DATA: Maximum Tonnage 55 Ton Maximum Bending Length 82.1” Maximum Stroke Length 3.94” Open Height 1

Tonnage: 55T

Valparaiso, IN
View Listing

Amada Coma 567

$RFQ

ONE (1) Used U.S. AMADA C.N.C. TURRET PUNCH 55 TON MODEL COMA 50-60-72 44 STATION AUTO INDEX • Max. Punching Force 55 U.S. Tons • Accuracy Punching w/No Repositioning Excellent • Sheet Size 60” x 72”

Tonnage: 55T

Valparaiso, IN
View Listing

Accupress 713010 Year 2002

$RFQ

Used Accurpress Hydraulic Press Brake Model No 713010 Capacity………………………………………………………………… 130 Ton Bending Length…………………………………………………………. 10’ Feet Year Mfg…………………………………………………………………2002 ETS 3000 Control

Tonnage: 130T

Valparaiso, IN
View Listing

Amada Vipros 255 Year 2001 (3) Auto index

$49,000

Quotation One Used Amada Vipros 255 31 Station 3 (Three) Auto index Year 2001 Specifications: Capacity................................................................. 22 Ton Sheet Size..........................

Tonnage: 22T

Valparaiso, IN
View Listing

SPARK 40" x 236" Hollow Spindle Manual Lathe, 14" Bore

$RFQ

Reference #27489 SPARK 40" x 236" Hollow Spindle Manual Lathe, 14" Bore, Brand New Model: Oil Country 1000 x 6000 FEATURES: 14.17" Spindle Bore Diameter CAPACITY: Maximum Swing Over Bed

Swing: 39.37"
Spindle hole diameter: 14.17"

Melville, NY
View Listing

PEXTO FOOT SHEAR

$RFQ

PEXTO FOOT SHEAR S/N 137 DIMENSIONS 47" LR X 55" FB X 41" H

Des Plaines, IL
View Listing

LUCAS MODEL 41 HORIZONTAL BORING MILL

$9,950

15 HP, 3" SPINDLE, #5 MORSE TAPER, 1200 RPM, 32X48 TABLE, S/N: 41-33-4

Spindle diameter: 3"
X axis travel: 48"

THOUSAND OAKS, CA
View Listing

CHARMILLES ELERODA 110 SINKER EDM

$4,950

ISOPULSE TYPE 25, SONY DRO, 220/3PH, LISTA CABINET & BASE

THOUSAND OAKS, CA
View Listing

17 ft diameter Skoda SK-50A VBM w/Side Head & (2) Swivelling Ram Heads

$RFQ

Built new in 1972, this 17 ft diameter Manual type Vertical Boring Mill is still installed and may be inspected under power on request. It has been very well maintained and is in exceptional condition. Table Diameter

Swing: 187"

Rockville Centre, NY
View Listing

4" National High-Duty Upsetter w/Auto Tong Feed Re:24625

$RFQ

Rated steel bar capacity - 101.6 mm 4.0" Ram stroke - 343.0 mm 13.500" Grip opening - 152.0 mm 6.000" Gather - 158.0 mm 6.250" Hold on - 76.0 mm 3.000" Crank pin diameter of main shaft - 381

Maximum diameter: 4"

Rockville Centre, NY
View Listing

LANDIS 1R (REBUILT) CYLINDRICAL GRINDER

$9,950

PLAIN 6X18 REBUILT WITH CERAMIC BEARINGS, AUTOFEED, SPARKOUT, 50 HOURS ON MACHINE SINCE REBUILT

Swing: 6"
Centers: 18"

THOUSAND OAKS, CA
View Listing

1988 Mori Seiki MV-45/40 CNC Vertical Machining Center

$8,000

Specifications: Table Size: ......................................................... 43” X 17.7” X Axis Travel: .............................................................. 31.5” Y Axis Travel: ....................

X axis: 31.5"
Y axis: 17.7"

Schaumburg, IL
View Listing

120 ton Rail Bound Forging Manipulator new 2009, Re:24651

$RFQ

Nominal carrying capacity 120.0 tonnes 132.0 tons Tongs gripping range w/o jaw insert: max round diameter 2,000.0 mm 78.7" min round diameter 350.0 mm 13.8" max square 1,800.0 mm 70.9" T

Rockville Centre, NY
View Listing

Cincinnati Milacron Horizontal Mill No. 2MH $500 - OBO

$500

Well functioning Cincinnati Milacron Horizontal Mill. Comes with multiple machining arbors, and tons of different mill bits in various sizes. Controls work well and the original labels and instructions on machine are mi

X axis: 52"
Y axis: 45"

New York, NY
View Listing

Promecam RG103 110 Ton x 10ft Press Brake w/ NEW HURCO Backgauge

$29,500

Promecam RG103 110 Ton x 10ft Press Brake w/ NEW HURCO Backgauge 120' Between Housings:102.5

Tonnage: 110T

Elgin, IL
View Listing

2006 CATERPILLAR D5N LGP DOZER

$67,500

6 CYL CAT ENGINE, 3 SPD TRANS W/ FINGER-TIP STEERING, 30 IN PADS, 6-WAY BLADE (10 FT 10 IN WIDE), TOPCON LSB2 LASER RECEIVER, ENCLOSED CAB W/ A/C & HEAT, 6472 HRS SHOWING

Sutherlin, VA
View Listing

Timesaver Wet Wide Belt Sander Model: Lynx 37 MWT DBB-60

$44,995

Year: 2012 Make: Timesaver Model: Lynx 37 MWT DBB-60 Condition: Excellent Electrical: 460/3Phase Machine Status: Under Power Shipping Info: Rigging Fee Extra Weight: 12,000 lbs Dimension: L x W x H 10'x6

Mooresville, NC
View Listing

USED "HARDINGE" SECOND OPERATION LATHE

$2,195

Year: ? Make: Hardinge Model: DV-59 Condition: Good Electrical: 230/460/3 wired 230 Machine Status: Can be powered up Shipping Info: We can load Weight: 1250 Dimension: L x W x H 54" x 24" x 52"

Mooresville, NC
View Listing

Wysong #1472 Mechanical Shear

$3,500

Year: ? Make: Wysong Model: 1472 Condition: Good Electrical: 230/3Phase Machine Status: Under Power Shipping Info: Rigging Fee Extra Weight: 4,700 Dimension: L x W x H 10'x8'x5' Machine Location:

Mooresville, NC
View Listing

Vertical Metal Shaper/Slotter Make: Morey Model: No.12M

$4,250

Year: 1941 Make: Morey Model: No. 12M Condition: Good Electrical: 230/3Phase Machine Status: Can be powered up Shipping Info: Rigging Fee Extra Weight: 10,000 lbs Dimension: L x W x H 9' x 5' x 8'

Mooresville, NC
View Listing

Sawing, Up Cut / Optimizing non ferrous Make: Omga Model: T 2005 OPT 6000

$24,995

Year: 2005 Make: Omga Model: T 2005 OPT 6000 Condition: Good Electrical: 460/3Phase Machine Status: Not Under Power Shipping Info: We can load Weight: 4000 lbs Dimension: L x W x H 50ft x 4ft x 5ft Machine L

Mooresville, NC
View Listing

CNC 3 axis router Make: Weeke Model: BHT 320 2/2 ProFi Line

$52,995

Year: 2002 Make: Weeke Model: BHT 320 2/2 Condition: Excellent Electrical: 230/460/3 wired 460 Machine Status: Under Power Shipping Info: Rigging Fee Extra Weight: 15,000 lbs Dimension: L x W x H 26' x 14&#

Mooresville, NC
View Listing

Vertical Turret Lathe Make: Bullard (Spiral Drive) Model: 42"

$9,950

Year: 1950's Make: Bullard Model: 42" Condition: Good Electrical: 230/3Phase Machine Status: Under Power Shipping Info: We can load Weight: 20,000 lbs Dimension: L x W x H 9'x9'x9' Machi

Mooresville, NC
View Listing

CLAUSING MODEL 1657 BENCH TYPE STEP PULLEY DRILL, 15"

$RFQ

SPECIFICATIONS DRILL TO CENTER OF CIRCLE: 15" DIAMETER CAPACITY, HAND FEED: 5/8" DIAMETER SPINDLE TRAVEL: 4-3/4" SPINDLE: 33 JT WITH 1/2" CHUCK COLUMN, GROUND STEEL: 3" DIAMETER, 3/16"

Swing: 15"

Bethlehem, PA
View Listing

2005 OCEAN AVENGER 1000/1B

$69,995

Year: 2005 Make: OCEAN AVENGER Model: 1000/1B Condition: Good Electrical: Unknown Machine Status: Under Power Shipping Info: We can load Weight: Dimension: L x W x H Machine Location: City: On Request St

Mooresville, NC
View Listing

Detroit Diesel Generator - Spectrum 250DSE - 265KW - 52 hours!

$30,000

Detroit Diesel Generator Spectrum 250DSE Only 52 hours! 600 gal fuel tank Weatherproof house w/lights Three phase, 400amp, 440V, 265KW Asking $30,000 OBO, loaded onto your truck.

Power: 265kW

Jacksonville, FL
View Listing

CNC Plasma Table Make: Linatrol Model: Picopath

$7,495

Year: 2006 Make: Linatrol Model: Picopath Condition: Good Electrical: 110/220/1Ph Machine Status: Under Power Shipping Info: We can load Weight: 3,000 lbs Dimension: L x W x H 16' x 11' x 8' Mach

Mooresville, NC
View Listing

Circle Shear Make: Niagara Model: 510 RC 3/8

$6,495

Year: ? Make: Niagara Model: 510 RC 3/8 Condition: Good Electrical: 230/460/3 wired 230 Machine Status: Can be powered up Shipping Info: We can load Weight: 2,000 lbs Dimension: L x W x H 19' x 2' x 7&#

Mooresville, NC
View Listing

Vibratory tub finisher #TC2460

$3,290

Year: 2007 Make: Finishing Assoc Model: TC2460 Condition: Fair Electrical: 230/3Phase Machine Status: Under Power Shipping Info: We can load Weight: 2000.00 Dimension: L x W x H 76 x 57" x 47" Mach

Mooresville, NC
View Listing

Okuma V4020/Cadet V machining center

$7,995

Year: 199? Make: Okuma Model: V4020/Cadet V Condition: Good Electrical: 230/3Phase Machine Status: Not Under Power Shipping Info: We can load Weight: 10000 Dimension: L x W x H Machine Location: City: On R

Mooresville, NC
View Listing

buy & sell, new & used machinery, machine tools & equipment

Machines currently for sale: