buy & sell, new & used machinery, machine tools & equipment

<Prev | 121 | 122 | 123 | 124 | 125 | 126 | 127 | 128 | 129 | 130 | Next>
Refine: Viewing 12201 - 12300 of 20838 matches
Sort by:
Items Per Page:  20 |  50 |  100
Hoesch 2000 ton press platen size 11.8 by 9 (2000)
$RFQ
Hoesch 2000 ton press platen size 11.8 by 9 (2000)
Hoesch 2000 ton press platen size 11.8 by 9 (2000)
LEBLOND 50 X 252 CNC HEAVY DUTY FLAT BED 2-AXIS LATHE (1980)
$RFQ
LEBLOND 50 X 252 CNC HEAVY DUTY FLAT BED 2-AXIS LATHE (1980)
LEBLOND 50 X 252 CNC HEAVY DUTY FLAT BED 2-AXIS LATHE (1980)
Adjustable Trailer Loading / Unloading Conveyor System
$RFQ
Adjustable Trailer Loading / Unloading Conveyor System
Adjustable Trailer Loading / Unloading Conveyor System
DMG Sprint 65-3 Linear CNC Lathe (2007)
$RFQ
DMG Sprint 65-3 Linear CNC Lathe (2007)
DMG Sprint 65-3 Linear CNC Lathe (2007)
25 TON ACCURPRESS MODEL 7254 HYDRAULIC PRESS BRAKE (1999)
$RFQ
25 TON ACCURPRESS MODEL 7254 HYDRAULIC PRESS BRAKE (1999)
25 TON ACCURPRESS MODEL 7254 HYDRAULIC PRESS BRAKE (1999)
Advanced Hydraulic Straight Side Press 570 Ton
$RFQ
Advanced Hydraulic Straight Side Press 570 Ton
Advanced Hydraulic Straight Side Press 570 Ton
Toyoda FA630 Horizontal Machining Center (1996)
$RFQ
Toyoda FA630 Horizontal Machining Center (1996)
Toyoda FA630 Horizontal Machining Center (1996)
Marvel Vertical Bandsaw (Tilt Frame)#8 Series Mark II (1994)
$RFQ
Marvel Vertical Bandsaw (Tilt Frame)#8 Series Mark II (1994)
Marvel Vertical Bandsaw (Tilt Frame)#8 Series Mark II (1994)
Mazak 3D Fabri Gear 150 (FG 150) 6-Axis CNC Tube & Pipe Laser
$RFQ
Mazak 3D Fabri Gear 150 (FG 150) 6-Axis CNC Tube & Pipe Laser
Mazak 3D Fabri Gear 150 (FG 150) 6-Axis CNC Tube & Pipe Laser
Chambersburg Heavy Duty Power Hammer
$RFQ
Chambersburg Heavy Duty Power Hammer
Chambersburg Heavy Duty Power Hammer
Heald 273A Universal Grinder
$RFQ
Heald 273A Universal Grinder
Heald 273A Universal Grinder
T A SHING GAP LATHE WITH 3" HOLE 24" / 32" X 84"
$RFQ
T A SHING GAP LATHE WITH 3" HOLE 24" / 32" X 84"
T A SHING GAP LATHE WITH 3" HOLE 24" / 32" X 84"
C. R. Onsrud Model 3025 Inverted Pin Router Tooling Woodworking
$2,185
C. R. Onsrud Model 3025 Inverted Pin Router Tooling Woodworking
CR Onsrud model 3025 inverted router, SN 30449, 30″ throat, 5HP 3-phase 230v motor, 1/4″, 3/8″, 5/16″ and 1/2″ collets, 20000rpm spindle, pneumatically retracting cutter and guide pin, lubrication system for spindle bear
Flow Abrasive Waterjet Cutting System 712207-1 4x8 Table Metalworking
$48,995
Flow Abrasive Waterjet Cutting System 712207-1 4x8 Table Metalworking
Serial # 271157 For more info on this item, or to discuss shipping options, please call Justin 419 - 487 - 1971 Will listen on any reasonable offer.
Mitsubishi FX-10 CNC Wire EDM - 1996 1998 - 5 Axis, Auto Lube, 25" x 2
$27,985
Mitsubishi FX-10 CNC Wire EDM - 1996 1998 - 5 Axis, Auto Lube, 25" x 2
I have four of these in stock. All are currently in good working. You can come and see them if interested. FX-10's we have in stock: Model serial # Yr produced FX10 08f10217 Apr-19
Mitsubishi FX-10 CNC Wire EDM - 1996 1998 - 5 Axis, Auto Lube, 25" x 2
$27,985
Mitsubishi FX-10 CNC Wire EDM - 1996 1998 - 5 Axis, Auto Lube, 25" x 2
I have four of these in stock. All are currently in good working. You can come and see them if interested. FX-10's we have in stock: Model serial # Yr produced FX10 08f10217 Apr-19
Mitsubishi FX-10 CNC Wire EDM - 1996 1998 - 5 Axis, Auto Lube, 25" x 2
$27,985
Mitsubishi FX-10 CNC Wire EDM - 1996 1998 - 5 Axis, Auto Lube, 25" x 2
I have four of these in stock. All are currently in good working. You can come and see them if interested. FX-10's we have in stock: Model serial # Yr produced FX10 08f10217 Apr-19
Mitsubishi FX-10 CNC Wire EDM - 1996 1998 - 5 Axis, Auto Lube, 25" x 2
$27,895
Mitsubishi FX-10 CNC Wire EDM - 1996 1998 - 5 Axis, Auto Lube, 25" x 2
I have four of these in stock. All are currently in good working. You can come and see them if interested. FX-10's we have in stock: Model serial # Yr produced FX10 08f10217 Apr-19
Mitsubishi FX10K FX-10K CNC Wire EDM Electric Discharge Machines 1998
$29,985
Mitsubishi FX10K FX-10K CNC Wire EDM Electric Discharge Machines 1998
Do you need an Electrical Discharge Machine. The Mitsubishi FX-10K CNC Wire EDM is available We have 3 in stock with manufacture dates from 1998-2000. These units are currently working and can be seen upon appointment.
Mitsubishi FX10K FX-10K CNC Wire EDM Electric Discharge Machines 1998
$29,985
Mitsubishi FX10K FX-10K CNC Wire EDM Electric Discharge Machines 1998
Do you need an Electrical Discharge Machine. The Mitsubishi FX-10K CNC Wire EDM is available We have 3 in stock with manufacture dates from 1998-2000. These units are currently working and can be seen upon appointment.
Mitsubishi FX10K FX-10K CNC Wire EDM Electric Discharge Machines
$29,985
Mitsubishi FX10K FX-10K CNC Wire EDM Electric Discharge Machines
Do you need an Electrical Discharge Machine. The Mitsubishi FX-10K CNC Wire EDM is available We have 3 in stock with manufacture dates from 1998-2000. These units are currently working and can be seen upon appointment.
Mitsubishi FX1 5-Axis Wire EDM Electrical Discharge CNC Machine Tooling
$19,985
Mitsubishi FX1 5-Axis Wire EDM Electrical Discharge CNC Machine Tooling
Currently working, come and see it with an appointment. Model serial # Yr produced FX1 56E012704 Oct-1996 If you have question, would like to come see it, or would like to discuss freight
AMADA MODEL RG 80/TRAK II PRESS BRAKE
$RFQ
AMADA MODEL RG 80/TRAK II PRESS BRAKE
AMADA MODEL RG 80/TRAK II PRESS BRAKE RACO Stock Number R060470 REFURBISHED AMADA, MODEL RG 80 PRESS BRAKE YEAR REFURBISHED 2015 MAXIMUM TONNAGE ----------------------------- 88 TONS MAXIMUM BENDING LENGTH -----
  • Tonnage: 88T
    6" X 12" MITSUI PRECISION HAND FEED SURFACE GRINDER
    $RFQ
    6" X 12" MITSUI PRECISION HAND FEED SURFACE GRINDER
    6" X 12" MITSUI PRECISION HAND FEED SURFACE GRINDER MODEL 200MH MANUFACTURED 1979 RACO Stock Number R018118 TABLE SIZE ------------------------------------------- 6-1/4" X 14" TABLE TRAVEL ----
    • Table width: 6"
    • Table length: 12"
      Amada RG-100
      $RFQ
      Amada RG-100
      Tonnage 110 Ton Overall Length Of Bed And Ram 118.2" Distance Between Housings 100.5" Stroke Of Ram 3.94" Open Height 14.58" Throat Depth 15.76" Ma
      • Tonnage: 110T
        FRYMA VMAZ 1800 DISZP Vacuum Processing units, Mixers with a homogenizer
        $RFQ
        FRYMA VMAZ 1800 DISZP Vacuum Processing units, Mixers with a homogenizer
        1) FRYMA VMAZ 1800 DISZP (1990 year) excellent condition country of origin: Switzerland year of manufacture: 1990 year vessel volume: 1800 liters vessel max. vacuum: -0.89 bar double jacket volume: 300 liters doub
        20" X 40" NICCO HYDRAULIC SURFACE GRINDER
        $RFQ
        20" X 40" NICCO HYDRAULIC SURFACE GRINDER
        20" X 40" NICCO HYDRAULIC SURFACE GRINDER MODEL NSG-10S MANUFACTURED 1980'S RACO Stock Number R018125 MAXIMUM TABLE LONGITUDINAL FEED --------------- 46.2" MAXIMUM TABLE CROSS FEED ------------
        • Table width: 20"
        • Table length: 40"
          20" ROCKWELL WOOD/NON FERROUS VERTICAL BAND SAW
          $RFQ
          20" ROCKWELL WOOD/NON FERROUS VERTICAL BAND SAW
          20" ROCKWELL WOOD/NON FERROUS VERTICAL BAND SAW MODEL 28-340 RACO Stock Number R018126 CAPACITY ---------------------------------------- 19-3/4" HEIGHT UNDER TOP GUIDE -------------------- 13-1/2"
          • Throat capacity: 20"
            60" x 14 guage Wysong High Speed Shear
            $RFQ
            60" x 14 guage Wysong High Speed Shear
            Make: Wysong, Model: HS1460, Material Thickness: 14 g, Maximum Width: 60”, Speed: 200 strokes per minute, Wichita Clutch & Brake, Motor: 8HP Baldor AC, Spare Blades, Manuals & Drawings
            1983 HARDINGE MODEL HLV-H (KL-1) PRECISION TOOLROOM LATHE, 11" X 18&qu
            $RFQ
            1983 HARDINGE MODEL HLV-H (KL-1) PRECISION TOOLROOM LATHE, 11" X 18&qu
            SPECIFICATIONS SWING OVER BED: 11" SWING OVER CARRIAGE EDGE: 9" SWING OVER CROSS SLIDE: 6-1/2" DISTANCE BETWEEN CENTERS: 18" SPINDLE MOUNT: HARDINGE TAPER WITH 5-C COLLET INTERNAL TAPER
            • Swing: 11"
            • Centers: 18"
              CLAUSING MODEL 1687 & 1668, 4-SPINDLE VARIABLE SPEED DRILL PRESS, 15”
              $RFQ
              CLAUSING MODEL 1687 & 1668, 4-SPINDLE VARIABLE SPEED DRILL PRESS, 15”
              SPECIFICATIONS DRILL HEADS: 4 DRILL TO CENTER OF CIRCLE: 15” THROAT: 7.5” SPINDLE TAPER: #2 MT SPINDLE TRAVEL: 4.5” OIL TROUGH TABLE: 20” X 60” SPEEDS (3 MODEL 1687): 330 – 2,640 RPM SPEEDS (1 MODEL 1668): 500
              • # Spindles: #4
                USED KURT MODEL D675 ANGLOCK VISE, 7-1/2"
                $400
                USED KURT MODEL D675 ANGLOCK VISE, 7-1/2"
                FEATURES OF VISE • THE D675 HAS TWO MAJOR IMPROVEMENTS: A 7-1/2" JAW OPENING AND A NEW STATIONARY JAW FEATURES AN INTEGRAL KEY AND LARGER FASTENERS THAT REDUCES DEFLECTION BY 50% • BED HEIGHT MATCHED TO SIZE
                Amada Pega 357 (1986)
                $RFQ
                Amada Pega 357 (1986)
                Amada Pega 357 (1986)
                Brown & Sharpe Mistral 7.7.5
                $RFQ
                Brown & Sharpe Mistral 7.7.5
                Brown & Sharpe Mistral 7.7.5
                ZEISS CONTURA G2 7.7.6
                $RFQ
                ZEISS CONTURA G2 7.7.6
                ZEISS CONTURA G2 7.7.6
                Pillar MK11 Induction Heating Power Supply
                $RFQ
                Pillar MK11 Induction Heating Power Supply
                Pillar MK11 Induction Heating Power Supply
                Grapar Industrial Parts Washer 3 Stage Conveyor Belt Washer Gas Fired Dual Lane
                $RFQ
                Grapar Industrial Parts Washer 3 Stage Conveyor Belt Washer Gas Fired Dual Lane
                Grapar Industrial Parts Washer 3 Stage Conveyor Belt Washer Gas Fired Dual Lane
                KURAKI LCN 12-20
                $RFQ
                KURAKI LCN 12-20
                KURAKI LCN 12-20
                Alesa Monti MCS-100
                $RFQ
                Alesa Monti MCS-100
                Alesa Monti MCS-100
                72" x 120" x 14" STARRET PINK GRANITE SURFACE PLATE
                $RFQ
                72" x 120" x 14" STARRET PINK GRANITE SURFACE PLATE
                72" x 120" x 14" STARRET PINK GRANITE SURFACE PLATE
                60" x 120" x 14" COLLINS "MICROFLAT"
                $RFQ
                60" x 120" x 14" COLLINS "MICROFLAT"
                60" x 120" x 14" COLLINS "MICROFLAT"
                60" x 120" x 20" BLACK GRANITE SURFACE PLATE
                $RFQ
                60" x 120" x 20" BLACK GRANITE SURFACE PLATE
                60" x 120" x 20" BLACK GRANITE SURFACE PLATE
                48" x 144" x 18" GRANITE SURFACE PLATE
                $RFQ
                48" x 144" x 18" GRANITE SURFACE PLATE
                48" x 144" x 18" GRANITE SURFACE PLATE
                Femco WBMC-100R2
                $RFQ
                Femco WBMC-100R2
                Femco WBMC-100R2
                8' X 16' GRANITE SURFACE PLATE
                $RFQ
                8' X 16' GRANITE SURFACE PLATE
                8' X 16' GRANITE SURFACE PLATE
                2007 Romi M27x 80 Combination CNC Lathe
                $RFQ
                2007 Romi M27x 80 Combination CNC Lathe
                2007 Romi M27x 80 Combination CNC Lathe
                Schiess BF160T
                $RFQ
                Schiess BF160T
                Schiess BF160T
                Mori Seiki NHX5000 (2011)
                $RFQ
                Mori Seiki NHX5000 (2011)
                Mori Seiki NHX5000 (2011)
                OKK VM-7 (2001)
                $RFQ
                OKK VM-7 (2001)
                OKK VM-7 (2001)
                MLTPLX6300 Parts
                $RFQ
                MLTPLX6300 Parts
                MLTPLX6300 Parts
                BROWN & SHARPE CMM 8" x 20" x 16"
                $RFQ
                BROWN & SHARPE CMM 8" x 20" x 16"
                BROWN & SHARPE CMM 8" x 20" x 16"
                Makino V55-5XA (2002)
                $RFQ
                Makino V55-5XA (2002)
                Makino V55-5XA (2002)
                HAAS VR-11B (2007)
                $RFQ
                HAAS VR-11B (2007)
                HAAS VR-11B (2007)
                MAZAK INTEGREX 70Y/3000 (1997)
                $RFQ
                MAZAK INTEGREX 70Y/3000 (1997)
                MAZAK INTEGREX 70Y/3000 (1997)
                MAKINO A-71 (2008)
                $RFQ
                MAKINO A-71 (2008)
                MAKINO A-71 (2008)
                MAKINO A-71 (2003)
                $RFQ
                MAKINO A-71 (2003)
                MAKINO A-71 (2003)
                HAAS TL-3B (2014)
                $RFQ
                HAAS TL-3B (2014)
                HAAS TL-3B (2014)
                KNUTH 55/110D 60 TON HYDRAULIC IRONWORKER
                $RFQ
                KNUTH 55/110D 60 TON HYDRAULIC IRONWORKER
                KNUTH 55/110D 60 TON HYDRAULIC IRONWORKER
                KNUTH 80/150D 80 TON HYDRAULIC IRONWORKER
                $RFQ
                KNUTH 80/150D 80 TON HYDRAULIC IRONWORKER
                KNUTH 80/150D 80 TON HYDRAULIC IRONWORKER
                METAL MUNCHER MM61E HYDRAULIC IRONWORKER, 49 TON
                $RFQ
                METAL MUNCHER MM61E HYDRAULIC IRONWORKER, 49 TON
                METAL MUNCHER MM61E HYDRAULIC IRONWORKER, 49 TON
                4” TOS W100A Table Type Horizontal Boring Mill (1988)
                $RFQ
                4” TOS W100A Table Type Horizontal Boring Mill (1988)
                4” TOS W100A Table Type Horizontal Boring Mill (1988)
                Parpas Omnia 32 (2006)
                $RFQ
                Parpas Omnia 32 (2006)
                Parpas Omnia 32 (2006)
                1970 Trane, RTAA070AYN01A3D1BGKN, 70 Tons, 200/60/3 Volts, R-22
                $RFQ
                1970 Trane, RTAA070AYN01A3D1BGKN, 70 Tons, 200/60/3 Volts, R-22
                1970 Trane, RTAA070AYN01A3D1BGKN, 70 Tons, 200/60/3 Volts, R-22 Each used chiller is fully refurbished and test ran to full capacity prior to shipment. Video documentation of the chiller’s test run is made available o
                1970 Trane, RTAA070AYN01A3D1BGHKN, 70 tons, Air-Cooled, R-22
                $RFQ
                1970 Trane, RTAA070AYN01A3D1BGHKN, 70 tons, Air-Cooled, R-22
                1970 Trane, RTAA070AYN01A3D1BGHKN, 70 tons, Air-Cooled, R-22 Each used chiller is fully refurbished and test ran to full capacity prior to shipment. Video documentation of the chiller’s test run is made available onl
                FADAL VMC-3016
                $RFQ
                FADAL VMC-3016
                FADAL VMC-3016
                FADAL. VMC-6030HT
                $54,900
                FADAL. VMC-6030HT
                CNC VERTICAL MACHINING CENTER, FADAL MDL. VMC-6030HT, CNC Multi control, Remfg. in 2012 by Wesco, 62.5” x 30” table, 3,500 lb. table load, 60” X, 30” Y & 28” Z axis travels, CAT-40 spdl. taper, 10,000
                hydraulic power unit
                $RFQ
                hydraulic power unit
                Hydraulic Power Unit with a Mitsubishi 3 Phase 50 Horse Power Induction Motor with 3000 Continuous PSI Colfax Imo Pump unit is used pulled from operating mill for further information call Neil at 1-912-381-4723
                • Motor: 50HP
                  Hybco Tap Sharpening Machine, Model 1100, 1983, SN: 7411
                  $1,850
                  Hybco Tap Sharpening Machine, Model 1100, 1983, SN: 7411
                  Hybco Tap Sharpening Machine, Model 1100, 1983, SN: 7411 SPECIFICATIONS: Grinding wheel capacity: 6" diameter Standard Motor: 1/2 HP 220/440/3/60 1750 RPM Size K chamfer head (capacity): 1/8" - 3/4&qu
                  8' X 1/4" Amada Mechanical Shear, MODEL M-2560, 1981, SN: 2560327
                  $22,500
                  8' X 1/4" Amada Mechanical Shear, MODEL M-2560, 1981, SN: 2560327
                  8' X 1/4" Amada Mechanical Shear, MODEL M-2560, 1981, SN: 2560327 General Specifications: Capacity (Thickness) 1/4" Length: 8' Strokes per Minute: 60 SPM Full Load Power: 7.9 KVA
                  Hardinge Model: HLV, SN: HLV-H-177
                  $12,500
                  Hardinge Model: HLV, SN: HLV-H-177
                  Hardinge Model: HLV, SN: HLV-H-177 General Specifications: Volts 208, 3 Phase, 1 Hp Cycle 60 With: Collets Hardinge 5” 3-jaw chuck with wrench Condition: Good. PRICE: F.O.B. Rochester “as-i
                  7.8" X 11.8" TSCHUDIN CNC PLAIN CYLINDRICAL GRINDER, MODEL PL24
                  $RFQ
                  7.8" X 11.8" TSCHUDIN CNC PLAIN CYLINDRICAL GRINDER, MODEL PL24
                  7.8" X 11.8" TSCHUDIN CNC PLAIN CYLINDRICAL GRINDER MODEL PL24 MANUFACTURED 2001 RACO Stock Number R017801 MADE IN SWITZERLAND, FROM MEDICAL DEVICE MANUFACTURER SWING OVER TABLE ----------------------
                  • Swing: 7.87"
                  • Centers: 11.8"
                    BAILEIGH Floor Drill Press 110V DP-2012F-HD-V2
                    $RFQ
                    BAILEIGH Floor Drill Press 110V DP-2012F-HD-V2
                    CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: Need more capacity from your drill press, well look at the DP-2012F-HD-V2 floor drill press to see if it will fit your needs. This mammoth has a 20” swing and a c
                    7-Roll Turek & Heller Straightener
                    $RFQ
                    7-Roll Turek & Heller Straightener
                    419-872-2364 / [email protected] UTUBE NUMBER: 3221 MANUFACTURER: TUREK & HELLER SPECIFICATIONS: Line Direction: Left to Right Maximum Tube O.D.: 2.25" Spindle Diameter: 2-1/2" Spind
                    • Bar diameter: 2.5"
                      1972 Hardinge HLV-H Precision Toolroom Lathe, 11" x 18"
                      $RFQ
                      1972 Hardinge HLV-H Precision Toolroom Lathe, 11" x 18"
                      SPECIFICATIONS SWING OVER BED: 11" SWING OVER CARRIAGE: 9" SWING OVER CROSS SLIDE: 6" DISTANCE BETWEEN CENTERS: 18" SPINDLE NOSE: 5C HARDINGE TAPER NOSE VARIABLE SPINDLE SPEEDS: 125 TO 3000 RP
                      • Swing: 11"
                      • Centers: 18"
                        Okamoto Grind-X ACC 20-40DX (2001)
                        $RFQ
                        Okamoto Grind-X ACC 20-40DX (2001)
                        Okamoto Grind-X ACC 20-40DX (2001)
                        GUYSON SUPER 9 BEADBLASTER
                        $2,589
                        GUYSON SUPER 9 BEADBLASTER
                        Capacity: 150 Kg Description: Guyson Super 9 beadblaster. Components can be loaded by overhead roof access. Dust collector. Blast chamber dimensions: H=1300mm W=1200mm D=1200mm. Max component dimensions = 1000
                        • Width: 48"
                        • Height: 51"
                          300 TON - SAFAN PRESS BRAKE
                          $18,499
                          300 TON - SAFAN PRESS BRAKE
                          Capacity: 4300mm (14') working length 300 tons 4300 mm (14') Total bending length 3200 mm (10'6") Distance between uprights 250 mm (10") Stroke Required space ca. B 4800 x H 3400 x D
                          • Tonnage: 300T
                            16" X 32" OKAMOTO HYDRAULIC SURFACE GRINDER
                            $RFQ
                            16" X 32" OKAMOTO HYDRAULIC SURFACE GRINDER
                            16" X 32" OKAMOTO HYDRAULIC SURFACE GRINDER MODEL PSG-84 MANUFACTURED 1981 RACO Stock Number R018122 MAXIMUM GRINDING LENGTH ----------------------- 32" MAXIMUM GRINDING WIDTH ---------------------
                            • Table width: 16"
                            • Table length: 32"
                              Suenn Liang#SP-TB5M-301OK transformer
                              $245
                              Suenn Liang#SP-TB5M-301OK transformer
                              Year: 1997 Make: Suenn Liang Model: SP-TB5M-301OK Condition: Good Electrical: 230/460/3 wired 460 Machine Status: Can be powered up Shipping Info: We can load Weight: 100 Dimension: L x W x H 15 x 15 x 20"
                              16" X 40" BRIDGEPORT ROMI EZ-PATH CNC/MANUAL ENGINE LATHE
                              $RFQ
                              16" X 40" BRIDGEPORT ROMI EZ-PATH CNC/MANUAL ENGINE LATHE
                              16" X 40" BRIDGEPORT ROMI EZ-PATH CNC/MANUAL ENGINE LATHE MODEL EZ PATH-SD MANUFACTURED 1998 RACO Stock Number R018121 SWING OVER BED -------------------------------- 16.5" SWING OVER CROSS SLIDE -
                              • Swing: 16"
                              • Centers: 40"
                                Verson 250-Ton Gap Frame Press
                                $RFQ
                                Verson 250-Ton Gap Frame Press
                                Capacity: 250 Tons Stroke: 10” Shut Height: 26” Adjustment: 6” Bed Area L-R/F-B: 62” x 36” Ram Area L-R/F-B: 52” x 34” Speed: 30 SPM OAD: 84”LR X 120”FB X 198”T APPROX WEIGHT: 64,000 LBS EQUIPPED WITH:
                                • Tonnage: 250T
                                • Stroke: 10"
                                  PRE 18" Wide Straightener-Feeder
                                  $2,500
                                  PRE 18" Wide Straightener-Feeder
                                  Press Room Equipment 18" Straightener / Feeder
                                  Rowe 3000 Lb. X 10" Wide Cradle-Straightener
                                  $3,500
                                  Rowe 3000 Lb. X 10" Wide Cradle-Straightener
                                  COIL CAPACITY ............................ 3,000# WIDTH .................................... 10" O.D. ..................................... 48" FEED DIRECTION ......................
                                  • Maximum weight capacity: 3000Lb
                                  • Maximum coil width: 10"
                                    Smith Brands 5000 Lb. X 18" Wide Cradle-Straightener
                                    $4,200
                                    Smith Brands 5000 Lb. X 18" Wide Cradle-Straightener
                                    Smith Brands mdl. SC3 18" Coil Cradle / Straightener s/n 1872-11
                                    • Maximum weight capacity: 5000Lb
                                    • Maximum coil width: 18"
                                      OKUMA LT-25 TWIN SPINDLE TWIN TURRET CNC TURNING CENTER (2000)
                                      $RFQ
                                      OKUMA LT-25 TWIN SPINDLE TWIN TURRET CNC TURNING CENTER (2000)
                                      MANUFACTURED IN 2000 SERIAL NUMBER: 0082 MAX TURNING DIAMETER................................................ 11.81" MAX SWING.......................................................................... 19.67&qu
                                      • Swing: 19.67"
                                      • Centers: 60"
                                        OKUMA LNC-8 CNC TURNING CENTER (1996)
                                        $RFQ
                                        OKUMA LNC-8 CNC TURNING CENTER (1996)
                                        YEAR NEW........... 1996 S.N. ........................ D823 MAX SWING 15.75" LONGITUDINAL TRAVEL 19.89" MAX TURNING 9.84" SPINDLE BORE 2.2" MAIN MOTOR 15 HP SPINDLE SPEED 4200 RPM TURRET
                                        • Swing: 15.75"
                                        • Centers: 19.89"
                                          NIPPEI TOYOMA(NTC) MODEL NV4-G CNC VERTICAL MACHINING CENTER (2000)
                                          $RFQ
                                          NIPPEI TOYOMA(NTC) MODEL NV4-G CNC VERTICAL MACHINING CENTER (2000)
                                          MANUFACTURED IN 2000 PALLETS (2)................................................................ 21" X 18" MAX WEIGHT OF WORKPIECE.............................. 442 LBS SPINDLE SPEED.......................
                                          • X axis: 19.6"
                                          • Y axis: 17.7"
                                            MORI SEIKI SV50 CNC VERTICAL MACHINING CENTER (1996)
                                            $RFQ
                                            MORI SEIKI SV50 CNC VERTICAL MACHINING CENTER (1996)
                                            YEAR NEW........ 1996 S.N. ..................... 349 TABLE SIZE 43.3" X 23.6" MAX TABLE LOAD 2,640 LBS TRAVELS (X) 31.5" (Y) 20.1" (Z) 20.1" RAPID
                                            • X axis: 31.5"
                                            • Y axis: 20.1"
                                              MORI SEIKI RL-253 TWIN SPINDLE TWIN TURRET CNC TURNING CENTER (1998)
                                              $RFQ
                                              MORI SEIKI RL-253 TWIN SPINDLE TWIN TURRET CNC TURNING CENTER (1998)
                                              YEAR NEW............. 1998 S.N. .......................... 46 MAX. SWING DIA. OF WORK PIECES ................... 15.5" X 2 MAX. DISTANCE BETWEEN SPINDLES ............... 22.0" MAX. TURNING LENGTH .......
                                              • Swing: 15.5"
                                              • Centers: 7"
                                                MORI SEIKI NL-2500Y/700 CNC MILL/DRILL TURNING CENTER (2005)
                                                $RFQ
                                                MORI SEIKI NL-2500Y/700 CNC MILL/DRILL TURNING CENTER (2005)
                                                MANUFACTURED....... 11/2005 INSTALLED NEW........ 2006 MAX SWING 26" MAX TURNING DIAMETER 14" CENTER DISTANCE 30" SPINDLE MOTOR 25/20 H.P. SPINDLE SPEED 4,000 RPM SPINDLE BORE 3.6" SPINDLE
                                                • Swing: 26"
                                                • Centers: 30"
                                                  FADAL VMC 4525HT CNC VERTICAL MACHINING CENTER (2002)
                                                  $RFQ
                                                  FADAL VMC 4525HT CNC VERTICAL MACHINING CENTER (2002)
                                                  YEAR NEW....... 2002 SERIAL NUMBER: 012002074462 TABLE SIZE 53.5" X 25" MAX TABLE CAPACITY 4529 LBS TRAVELS (X) 45" (Y) 25" (Z) 32" SPINDLE TAPER
                                                  • X axis: 45"
                                                  • Y axis: 25"
                                                    DAHLIH HC2000 CNC HORIZONTAL MACHINING CENTER (2012)
                                                    $RFQ
                                                    DAHLIH HC2000 CNC HORIZONTAL MACHINING CENTER (2012)
                                                    YEAR NEW...... 2012 SERIAL NUMBER: 3004010043 TABLE 90.6" X 38.2" MAX TABLE LOAD 15,400 LBS TRAVELS --LONGITUDINAL(X) 78.7" VERTICAL (Y) 39.4"
                                                    • X axis: 78.7"
                                                    • Y axis: 39.4"
                                                      GREENERD HCA-30-12R C-FRAME 30 TON PRESS
                                                      $RFQ
                                                      GREENERD HCA-30-12R C-FRAME 30 TON PRESS
                                                      GREENERD HCA-30-12R C-FRAME 30 TON PRESS
                                                      25 Ton Williams & White, 18" str., 26" DL, 48" x 48"
                                                      $RFQ
                                                      25 Ton Williams & White, 18" str., 26" DL, 48" x 48"
                                                      26 Ton Williams & White, 18" str., 26" DL, 48" x 48" bed
                                                      Tos Varnsdorf WHN13.8
                                                      $RFQ
                                                      Tos Varnsdorf WHN13.8
                                                      Tos Varnsdorf WHN13.9
                                                      BERARDI ALTS130-C 5-Axis
                                                      $RFQ
                                                      BERARDI ALTS130-C 5-Axis
                                                      BERARDI ALTS130-C 5-Axis
                                                      BERARDI ALTS130-C 5-Axis
                                                      $RFQ
                                                      BERARDI ALTS130-C 5-Axis
                                                      BERARDI ALTS130-C 5-Axis
                                                      HURCO VMX 42 (2010)
                                                      $RFQ
                                                      HURCO VMX 42 (2010)
                                                      HURCO VMX 42 (2010)
                                                      POREBA TR115B1 x 6m /236”
                                                      $RFQ
                                                      POREBA TR115B1 x 6m /236”
                                                      POREBA TR115B1 x 6m /236”
                                                      MULTIPRESS FH20-20H
                                                      $RFQ
                                                      MULTIPRESS FH20-20H
                                                      MULTIPRESS FH20-20H
                                                      Categories:
                                                      Condition:
                                                      Manufacturer:
                                                      Location:
                                                      Price:
                                                      •  to 
                                                      <Prev | 121 | 122 | 123 | 124 | 125 | 126 | 127 | 128 | 129 | 130 | Next>