Machine Sales – Buy or Sell New and Used Machinery and Machine Tools at Machine Sales

2015 JCB 535-140 HI VIZ

$13,000

Class Telehandlers Make JCB Model 535-140 HI VIZ Year 2015 JCB 535-140 HI VIZ Turbo Powershift Telehandler c/w Sway, Side Shift, WLI, Reverse Camera, A/C, Forks

HARTLEPOOL,
View Listing

6" X 12" CHEVALIER HAND FEED SURFACE GRINDER, MODEL FSG-612

$RFQ

6" X 12" CHEVALIER HAND FEED SURFACE GRINDER MODEL FSG-612 S/N 01-3129 NEW 1983 LONGITUDINAL FEED CAPACITY ------------------------------------ 13" CROS

Table width: 6"
Table length: 12"

Des Plaines, IL
View Listing

MAKINO S33-APC VMC with APC, Professional 3 Control, 25.6" x 19.7"

$RFQ

SPECIFICATIONS TABLE SIZE: 23.6” X 15.7” MACHINING CUBE: 23.6” X 15.7” X 16.5” TABLE LOAD: 880 LBS X-AXIS TRAVEL: 25.6" Y-AXIS TRAVEL: 19.7" Z-AXIS TRAVEL: 17.7" SPINDLE TAPER: CT-40 SPINDLE: 13

X axis: 25.6"
Y axis: 19.7"

Bethlehem, PA
View Listing

2006 Mad Vac Compact Street Parking Lot Sweeper

$10,500

2006 MadVac Street Parking Lot Sweeper Model 101D 963 Total Hours Kubota 3 Cylinder Diesel with Eaton Hydraulic Drive and P/S Sweeping Head with fully rebuilt with new rubber and swing around gutter broom Hand Held Va

Fontana, CA
View Listing

1985 Ford F-700 Chipper Dump

$7,900

1985 Ford F-700 Chipper Dump 370 Gas Motor with 5-2 speed rear axle 15' Chipper Dump Box with steel floor,removable sides and swing rear barn doors. Tool boxes, pintle tow hitch 90% Tires, Ex State owned and serviced

Fontana, CA
View Listing

1984 Ford F-700 Crane Truck

$RFQ

1984 Ford F-700 Crane Truck, 370 gas, 5-2 speed rear, ps, air brakes, Pitman Hydra-Lift Crane, 6 ton capacity with dual controls, 5th wheel, ex county owned and California Legal, no ARB regulations.

Lifting capacity: 6T

Fontana, CA
View Listing

1987 International S2500 Asphalt Distributor Truck

$RFQ

1987 International Asphalt Distributor 2005 Rosco Maximizer Distributor Body with Automatic In Cab Controls Model EZ 2S Engine Take Off System Constant Flow Power Take Off Settings For Flow, Speed and Spray Bar Width, Ga

Fontana, CA
View Listing

1989 Ford E350 Service/Mechanic Truck

$8,900

1989 Ford E 350 Service/Mechanic Truck, 7.3L DIESEL automatic, ps, pb,ac,9'service body with EAGLE Lift Gate, 8hp Briggs and Straten air compressor, new paint interior and transmission, fresh alignment and front tire

Fontana, CA
View Listing

1990 Frauhauf NuWay Curtian Side Slide Axle

$10,900

1990 Frauhauf NuVan Technology Sliding Axle Curtain Side Van, Goodyear Tires, barn rear doors, good floor, straight curtains, fleet maintained and owned.

Fontana, CA
View Listing

1987 GMC 7000 Crane Truck

$9,900

1987 GMC Crane Truck, JLG 8 Ton Crane, 8.2L Turbo Diesel, Allison 5-speed automatic, ps, air brakes 16' flatbed, tool boxes, trailer tow package, 61867 miles, ex county owned.

Lifting capacity: 8T

Fontana, CA
View Listing

1995 Ford F-700 Bucket Truck

$19,900

1995 Ford F-700 Bucket Truck 37961 Total Miles 2846 Total Hours 7.0L Gas Motor with Allison Automatic Trans, ps, pb Lift All Model LAH 37 IS. 42' Working Height with Single Man Bucket and Hydraulic Tool Hook Ups Hond

Fontana, CA
View Listing

1999 GMC C6500 Crew Cab Box Van Grip Truck

$RFQ

1999 GMC C6500 Crew Cab Box Van Grip Truck 3126 Cat Turbo Diesel with Allison Automatic PS, PB, AC, CC, PW, PDL, American Studio 24' FRP Body with Side Door and Overhead Dog House Hardwood Slat lined with Translucent

Fontana, CA
View Listing

2000 International 4700 single axle dump truck

$RFQ

2000 International 4700 single axle dump truck DT466 Allison 5-speed automatic transmission P/S air brakes Heil 10 ft. demo dump box with spread apron Tow ready pintle hitch with air to the rear Tarp system Horizon

Fontana, CA
View Listing

2000 International Crew Cab Type 3 Fire Engine

$RFQ

2000 International Crew Cab Type 3 Engine, DT530 300hp intercooled turbo diesel, 5-speed Allison automatic transmission, p/s air brakes, air-conditioning, cruise control, engine brake, Master body work company, Champion

Fontana, CA
View Listing

2000 International 3 axle Dump Truck Model 8100

$RFQ

2000 International 3 axle Dump Truck Model 8100 Cummins M11 turbo diesel with Eaton 8 speed with double reduction low Muncie air shift PTO Heil 15' demo body with spreader apron Towing package Hendrickson rear sus

Fontana, CA
View Listing

2000 Zieman 2660 Beaver Tail Trailer

$13,900

2000 Zieman 2660 Beaver Tail Trailer 26000lb gross 19000lb payload wood deck spring loaded steel ramps bucket rest and storage Ramsey cable winch Under/Front bed storage boxes All Goodyear Tires ex county owned since new

Fontana, CA
View Listing

2000 Zieman 2710 Beaver Tail Equipment Trailer

$14,500

2000 Zieman 2710 Beaver Tail Trailer 26000 GVW Air brakes 22 ft deck w/ 4' beavertail 8 ft steel ramps bucket storage D rings Hardwood deck 85 to 90% all matching Goodyear tires ex utility co owned clean and straight

Fontana, CA
View Listing

2001 TCE Gooseneck Equipment Trailer

$7,900

2001 TCE Gooseneck Equipment Trailer, 30' wood deck, 8 tire trailer w/spare. Ready for work

Fontana, CA
View Listing

2005 Ford F450 Tire Flatbed Truck

$13,900

2005 Ford F450 XL Super Duty 220963 miles, factory Ford rebuilt 6.0L turbo diesel complete, ac, ps, pb, 6 near new tires, Fleet Equipment 12' Tire Body, w/Anthony Lift Gate, PTO hydraulic driven air compressor 1/2&qu

Fontana, CA
View Listing

2006 Freightliner Stake Bed Business Class

$RFQ

2006 Freightliner Stake Bed Business Class, Cat 3406 turbo diesel 10-speed, ps, ac, air brakes 24'flatbed w/diamond plate steel floor Maxon Rail- gate, fleet maintained, recent new brakes and service and air bags.

Fontana, CA
View Listing

2010 Carson 16' Consession Trailer

$10,900

2010 Carson Concession Trailer, 16' long with two concession windows, rear ramp door, wired for shore or direct generator power, sink, water heater, lots of power plugs.

Fontana, CA
View Listing

2012 JOHN DEERE 210K EP BACKHOE

$52,500

4 CYL JD ENGINE, 4 SPD SHUTTLE SHIFT TRANS, 4X4, 4:1 BUCKET (7 FT), REAR BOX BLADE (7 FT 5 IN), 12-16.5 FRONT TIRES, 16.9X24 REAR TIRES, 2046 HRS SHOWING

Sutherlin, VA
View Listing

2002 CATERPILLAR CB634D ROLLER

$21,500

6 CYL CAT ENGINE, HYDRO-STATIC TRANS, DUAL 84 IN SMOOTH DRUMS, DRUM DRIVE, HIGH/LOW VIBRATION, DUAL WATER SYSTEM, OROPS, 5399 HRS SHOWING

Sutherlin, VA
View Listing

13" X 13" AMADA HFA-330 FULLY AUTOMATIC HYDRAULIC HORIZONTAL BAND

$RFQ

13" X 13" AMADA HFA-330 FULLY AUTOMATIC HYDRAULIC HORIZONTAL BAND SAW S/N 33030071 NEW 1994 CAPACITY ROUNDS ----------------------------------- 13"

Width capacity: 13"
Height capacity: 13"

Des Plaines, IL
View Listing

MITUTOYO B-231 CMM

$9,500

3D SOFTWARE, CALIBRATED ANNUALY, S/N: 801076, RENISHAW PROBE

X axis measuring range: 28"
Y axis measuring range: 24"

THOUSAND OAKS, CA
View Listing

CLAUSING COLCHESTER 8030 GEARED HEAD STRAIGHT BED ENGINE LATHE, 15” X 30&qu

$RFQ

CAPACITIES SWING OVER BED: 15-1/4” SWING OVER SADDLE WINGS: 15-1/4” SWING OVER CROSS SLIDE: 9-1/2” BAR CAPACITY THRU SPINDLE: 2-1/8” DISTANCE BETWEEN CENTERS: 30” HEADSTOCK SPINDLE NOSE: 6” – D1 CAMLOCK HOLE TH

Swing: 15"
Centers: 30"

Bethlehem, PA
View Listing

CLAUSING COLCHESTER 8030 GEARED HEAD STRAIGHT BED ENGINE LATHE, 15” X 30&qu

$RFQ

CAPACITIES SWING OVER BED: 15-1/4” SWING OVER SADDLE WINGS: 15-1/4” SWING OVER CROSS SLIDE: 9-1/2” BAR CAPACITY THRU SPINDLE: 2-1/8” DISTANCE BETWEEN CENTERS: 30” HEADSTOCK SPINDLE NOSE: 6” – D1 CAMLOCK HOLE TH

Swing: 15"
Centers: 30"

Bethlehem, PA
View Listing

CLAUSING COLCHESTER 8030 GEARED HEAD ENGINE LATHE, 15" X 30"

$RFQ

CAPACITIES SWING OVER BED: 15-1/4” SWING OVER SADDLE WINGS: 15-1/4” SWING OVER CROSS SLIDE: 9-1/2” BAR CAPACITY THRU SPINDLE: 2-1/8” DISTANCE BETWEEN CENTERS: 30” HEADSTOCK SPINDLE NOSE: 6” – D1 CAMLOCK HOLE TH

Swing: 15"
Centers: 30"

Bethlehem, PA
View Listing

HAAS GR-712 GANTRY ROUTER

$79,500

145X86X11, 8100 RPM, 10 ATC, 15HP, 40 TAPER, UNDER POWER & RUNNING

THOUSAND OAKS, CA
View Listing

Magna Flux #mag111- Partical inspection machine

$6,950

Year: 1987 Make: Magna flux Model: mag111/169500 Condition: Good Electrical: 110/1Phase Machine Status: Can be powered up Shipping Info: We can load Weight: Dimension: L x W x H 5' x 2' Machine

Mooresville, NC
View Listing

Wysong # A72-pneumatic air shear

$4,450

Year: ? Make: wysong Model: A-72 Condition: Good Electrical: air operated Machine Status: Can be powered up Shipping Info: We can load Weight: 2000 Dimension: L x W x H 9ft x 4ft x 5ft Machine Location:

Mooresville, NC
View Listing

custom built manual slip roll

$3,995

Year: ? Make: custom Model: 9ft x 18ga Condition: Good Machine Status: Shipping Info: We can load Weight: 600 Dimension: L x W x H 10ft x 2ft x 4ft Machine Location: City: On Request State: North Carol

Mooresville, NC
View Listing

Longem 26 x 120" manual gap bed lathe #LG26120

$5,750

Year: 199? Make: Longem Model: LG26120C Condition: Good Electrical: 230/460/3 wired 230 Machine Status: Under Power Shipping Info: We can load Weight: 8000 Machine Location: City: On Request State: Nor

Mooresville, NC
View Listing

1998 Fadal VMC # 917/5020AHT

$13,995

Year: 1998 Make: Fadal Model: #917-1/5020AHT Condition: Good Electrical: 230/460/3 wired 230 Machine Status: Under Power Shipping Info: Rigging Fee Extra Weight: 8500 Machine Location: City: On Request

X axis: 50"
Y axis: 20"

Mooresville, NC
View Listing

FANUC ARC MATE Sys. R-J3-100I Robot & Genesis Table/Lincoln Power Wave

$25,000

FANUC ARC MATE SYSTEM R-J3-100I Robot w/ Genesis Turn Table and Program Pad Lincoln Power Wave 450, Serial Number: F42671 Asking price is $25,000 OBO. Please contact Michael O'Dwyer for any questions: 262

Kenosha, WI
View Listing

1969 Pacific #K400-17 hyd. press brake

$25,950

Year: 1969 Make: Pacific Model: K400-17 Condition: Good Electrical: 230/460/3 wired 460 Machine Status: Can be powered up Shipping Info: Rigging Fee Extra Weight: 75,000 Dimension: L x W x H 18'x8'

Tonnage: 400T

Mooresville, NC
View Listing

Gray Series 60 Vertical Turret Lathe

$94,495

Year: 1968 Make: Gray Model: Series 60 Condition: Good Electrical: 460/3Phase Machine Status: Under Power Shipping Info: Requires rigger Machine Location: City: On Request State: North Carolina Category:

Mooresville, NC
View Listing

Bariola 12' x 3/8" Shear Model CB 29 LS

$26,995

Year: 1986 Make: Bariola Model: CB29LS Condition: Good Electrical: 220/440v 3ph 60hz 65Amps, Machine Status: Can be powered up Shipping Info: We can load Machine Location: City: On Request State: Minnesota

Mooresville, NC
View Listing

20,000Lb Forte L-Type Coil Car

$RFQ

Make: Forte Equipment Model: CLC -240 L-Type Floor Standing Design Weight Capacity: 20,000Lb Coil Width: 60" Hydraulic Lift Powered Traverse Self - Contained Hydraulics Controls Console

West Bloomfield, MI
View Listing

5" SUMMIT CNC TABLE TYPE HORIZONTAL BORING MILL, MODEL HTM5

$RFQ

5" SUMMIT CNC TABLE TYPE HORIZONTAL BORING MILL MODEL HTM5 S/N 07-LB-125 NEW 1997 SPINDLE DIAMETER ------------------------------- 4-15/16"

Spindle diameter: 5"
X axis travel: 98"

Des Plaines, IL
View Listing

33 Ton, AMADA, VIPROS 3610L, L-SHEAR, 6 SHELF LOADER, UNLOAD CONVEYOR,MFG:2

$RFQ

33 TON AMADA VIPROS 3610L TURRET PUNCH W/ L SHEAR, AS 651H (6) SHELF LOADER W/ 5' X 10' CAPACITY, REAR SIDE PART UNLOAD CONVEYOR MFG:2000

Tonnage: 33T

NEW CITY, NY
View Listing

4000 WATT AMADA,GEMINI FO-3015, 5' X 10',MFG:2002 APPROX:52,500 HOU

$RFQ

4000 WATT AMADA GEMINI F0-3015 CNC LASER CUTTER 52,500 TOTAL HOURS - LAST TURBO REPLACED @ 32,643 (24K TYPE) MFG:2002

Wattage: 4000W

NEW CITY, NY
View Listing

(4) 13" x 9.5" Face Plate Type Chuck Jaws

$RFQ

Reference #28372 (4) 13" x 9.5" Face Plate Type Chuck Jaws Center Distance ................... 7" Hole Diameter ..................... 7/8" Approximate Jaw Travel ............ 7" - 7.5&q

Diameter: 7"
# Jaws: #4

Melville, NY
View Listing

TAKISAWA TC-4 CNC TURNING CENTER

$24,300

TAKISAWA TC-4 CNC TURNING CENTER Make: Takisawa Model No.: TC-4 Serial No.: THXW1291 Condition: Very Good Comes with 12" Chuck, Tailstock & Chip Conveyor All specifications are approximations, and

Swing: 23.62"
Centers: 44"

Chino, CA
View Listing

1995 CATERPILLAR 135H MOTOR GRADER

$64,500

6 CYL CAT ENGINE, 8 SPD TRANS, 14 FT BLADE, 14.00R24 TIRES, ENCLOSED CAB W/ HEAT, 2337 HRS SHOWING

Sutherlin, VA
View Listing

3/8" Lewis 3SV8 Straighten & Cut Machine

$RFQ

No description providedCapacity3/16" - 3/8" Minimum Length3" Maximum Length12' Variable Speed Range60 - 350 FPM HP25 Electrics440V

Ivyland, PA
View Listing

Wafios Model AHSP1 Uncoiler

$RFQ

No description provided

Ivyland, PA
View Listing

5 HP Air Compressor

$RFQ

Electrical Disconnect And Motor Starter

Ivyland, PA
View Listing

Akyapak AK Bend Hydraulic 4-roll Bending Roll Model AHS 30/06-Special

$RFQ

Capacities in carbon (mild) steel with 36,000 PSI yield strength: Pre-bending capacity- 10' x 12 gauge to 6" ID Capacities in stainless steel Type 304/316L: Pre-bending capacity0 5' x 12 gauge to 6&

Roll length: 120"
Thickness: 0.1"

Lynchburg, VA
View Listing

MITSUBISHI FX-10 WIRE EDM

$24,950

5-AXIS, AUTO LUBE, 25" X 21" TABLE, AUTO WIRE FEED

X axis travel: 13.77"
Y axis travel: 9.84"

THOUSAND OAKS, CA
View Listing

buy & sell, new & used machinery, machine tools & equipment

Machines currently for sale: