buy & sell, new & used machinery, machine tools & equipment

<Prev | 261 | 262 | 263 | 264 | 265 | 266 | 267 | 268 | 269 | 270 | Next>
Refine: Viewing 13301 - 13350 of 20764 matches
Sort by:
Items Per Page:  20 |  50  |  100
32" Northfield Vertical wood Cutting Bandsaw and Re Saw
$3,450
32" Northfield Vertical wood Cutting Bandsaw and Re Saw
32" Throat 16" Max. Height under the guides 25-1/2" x 32" and 12-3/3" x 17- 3/4" Tables Tilting Table 3 HP 220 Volt 3 -Phase Motor Runs well Tires could use alittle attention. Rugg
Kalamazoo Fully Automatic Non Ferrous Compound Mitering Cold Saw
$4,250
Kalamazoo Fully Automatic Non Ferrous Compound Mitering Cold Saw
Machine Specs: Capacity @ 90 Solids 2-1/2" Round 4-3/4" Rectangle 6-1/4" x 4-1/4" @ 45 Rectangle 5-1/2"
10" x 14" Marvel Fully Automatic Tilting Band Saw
$8,950
10" x 14" Marvel Fully Automatic Tilting Band Saw
Machine Specs: Capacity Round 10" Rectangle 10" x 14" Blade Size 144" x 1" x .035 Blade Speeds
18" x 20" Marvel Fully Automatic Tilt Frame Band Saw
$9,950
18" x 20" Marvel Fully Automatic Tilt Frame Band Saw
Machine Specs: Capacity 18" x 20" Capacity at 45 18" x 12-1/2" Table Size 30" x 33" Blade Length 14'-6" Blade Width
24” Grob Variable Speed Vertical Band Saw with Air Feed Table
$2,650
24” Grob Variable Speed Vertical Band Saw with Air Feed Table
Machine Specs: Throat 24” Max Height 12” Table Size 24” x 28” Table Tilts 5 & 45 Degrees Blade Speeds 40 - 5000 RPM Blade Size 1/8 to 1” Wide by 179” Long Main HP 3 HP Weight 1670 LBS Equipped With: Welder
16” Doall Vertical Band Saw,With Extra Height,
$3,250
16” Doall Vertical Band Saw,With Extra Height,
Machine Specs: Throat 16” Cutting Height 12” ( Catalogue Spec) 14” Actual Table 24” x 24” Table Tilts Left/Right 45/10 Blade Size 1/16” - 1” Speeds 2 Ranges 50 - 300 FPM 860 - 5200 FPM Motor 1-1/2 HP 220/440 Volt
Lors Spot Welder 40 KVA
$RFQ
Lors Spot Welder 40 KVA
No description providedTransformer KVA40 Electrics440V/60 Cycle
  • Power: 40KVA
  • Power: 40KVA
    1/32" Nilson 700L Fourslide
    $RFQ
    1/32" Nilson 700L Fourslide
    No description providedWire Capacity1/32" Maximum Strip Width3/4" Straightener Feed Length4" Speed Range20 - 540 SPM Motor3/4 HP Stroke of Front Slide7/16" Stroke of Side Slides11/16" Stroke of Back Slide1/2" Approx. Flo
    TIN KNOCKER The Wizard HVAC Plasma Cutting System
    $RFQ
    TIN KNOCKER The Wizard HVAC Plasma Cutting System
    CALL 386-304-3720 FOR AVAILABILITY FEATURES: The Wizard plasma cutting system was developed specifically for the HVAC contractor/fabricator. It is designed to do all that a user could want and meet the user's
    1200 LBS Cooper Weymouth Double End Coil Reel
    $950
    1200 LBS Cooper Weymouth Double End Coil Reel
    600 LBS Capacity Each Side 10” Max Width 48” Max Dia of of Coil 10” Min Id 20” Max. Id 6 Keepers Good Condition Inspect in Our Lebanon NJ Warehouse
    Deckel 3Dimensional Engraving/Pantograph Machine
    $1,950
    Deckel 3Dimensional Engraving/Pantograph Machine
    Machine Specs: Ratio Min. 1 : 1.5 Max. 1 : 10 Work Table 7-7/8” x 14-1/8” Copy Table 12-1/2” x 20-1/2” Spindle Speeds 475 - 20.000 RPM KW .37/.55 220 Volt 3Phase Weight Approx. 1000 LBS Inspect Under Power in Our
    6-1/2” x 20” Barker Horizontal Mill with Vertical Head
    $2,750
    6-1/2” x 20” Barker Horizontal Mill with Vertical Head
    Machine Specs: Table Size 6-1/2” x 20” Travels Long 10” Cross 6” Vertical 6” Spindle Speeds 30 -15300 RPM Spindle Taper #30 Spindle HP2 220 Volt 3 Phase Equipped With Rotex Vertical Head - Model Model VA 255, S
    18” x 79” Tos Horizontal Mill with Vertical Head
    $8,950
    18” x 79” Tos Horizontal Mill with Vertical Head
    Specs: Table Size 18” x 79” Travels Long 55” Cross 17” Knee 18” Spindle Speeds (20) 20 - 1400 RPM Spindle Taper NO. 50 Spindle HP 15 KW (20 HP Approx) 220/440 3 Phase Feeds 13/32 - 52 IPM Rapids 129 IPM Weight
    9” x 46” Wells Index Vertical Milling Machine
    $2,250
    9” x 46” Wells Index Vertical Milling Machine
    Machine Specs: Table Size 9” x 46” Travels Long 32” Cross 12” Quill 5” Knee 16” Spindle Speeds 75 - 2850 RPM Spindle HP 2 HP 220 Volt 3 Phase Spindle Taper #30 Spindle Feeds .003, .006 and .0015 Weight 2600 LBs
    8” x 36” Burke Millrite Vertical Milling Machine
    $2,750
    8” x 36” Burke Millrite Vertical Milling Machine
    Machine Specs: Table Size 8” x 36” Travels Long 25” Cross 8” Quill 4” Knee 15” Spindle Speeds 185 - 2500 RPM Spindle HP 1 HP 220 Volt 3 Phase Spindle Taper R8 Weight 14500 LBs Equipped With: 1 HP Milling Head
    10” x 36” South Bend Engine lathe
    $2,450
    10” x 36” South Bend Engine lathe
    10” Swing 36” Center Distance 4-1/2’ Bed 4- 228 TPI Equipped with Bed Turret Collet Closer with Nose Piece 2 5” 3 Jaw Chucks 6” 4 Jaw Chuck Drive Plate Factory Cabinet 3 Phase Motor Please Note Missing Thread
    13" x 30" Pratt & Whitney Geared Head Tool Room Lathe
    $2,450
    13" x 30" Pratt & Whitney Geared Head Tool Room Lathe
    Machine Specs: Swing 13" Swing Over Slide 7" Center Distance 30 Spindle Bore 1-3/8" Spindle Speeds (8) 18 - 528 RPM HP 2 HP 220 Volt 3 _ Phase Threads
    19” x 54” Leblond Regal “ Servo Shift” Inch/ Metric Engine Lathe
    $8,950
    19” x 54” Leblond Regal “ Servo Shift” Inch/ Metric Engine Lathe
    Machine Specs: Swing over Bed 19” Swing over Cross Slide 11” Center Distance 54” Spindle Mount L - Taper Spindle Bore 3” Spindle HP 10 220/440 3 Phase wired 220 Spindle Speeds (12) 40 - 1600 RPM Threads Inch 2 -
    19” x 78” Leblond Regal “ Servo Shift” Engine Lathe
    $6,950
    19” x 78” Leblond Regal “ Servo Shift” Engine Lathe
    Machine Specs: Swing over Bed 19” Swing over Cross Slide 11” Center Distance 78” Spindle Mount L - Taper Spindle Bore 1-3/4” Spindle HP 7.5 220/440 3 Phase wired 220 Spindle Speeds (12) 25 - 1000 RPM Threads Inch
    19” x 78” Leblond Regal “ Servo Shift” Engine Lathe
    $6,950
    19” x 78” Leblond Regal “ Servo Shift” Engine Lathe
    Machine Specs: Swing over Bed 19” Swing over Cross Slide 11” Center Distance 54” Spindle Mount L - Taper Spindle Bore 1-3/4” Spindle HP 7.5 220/440 3 Phase wired 220 Spindle Speeds (12) 40 - 1600 RPM Threads Inch
    14” OGP Optical Comparator, with Surface Illumination
    $7,950
    14” OGP Optical Comparator, with Surface Illumination
    Machine Specs: Table Size 8” x 32” Travels Long. 12” Vertical Travel 9” Focus Travel (Cross) 3” Equipped With: Quadracheck II 2 Axis Read Out with Geometric Functions Power Traverse of Longitudinal and Vertical Tr
    14" J & L Optical Comparator
    $3,950
    14" J & L Optical Comparator
    6" x 25-1/2" Table 31.25 Power Lens Power UP and Down 8" x 6" Travels Light Visor Bench Centers and V - Block 115 Volt Operation
    19.69” x 27.56” x 15.75” Mitutoyo Coordinate Measuring Machine
    $18,500
    19.69” x 27.56” x 15.75” Mitutoyo Coordinate Measuring Machine
    Machine Specs: Travels X 19.69” Y 27.56” Z 15.75” Granite Table Size 25.12‘ x 45.67” Work Piece Weight Max 180 KG Height Max 20.8” Machine Dimensions Width 42” Depth 58” Height 89” Weight 615 KG Equipped With”
    Sunnen Horizontal Hone
    $2,650
    Sunnen Horizontal Hone
    Machine Specs: ID Range .060 - 6.5" Length 16" Speeds 200 - 1600 RPM Main HP 1/2 HP 115/230 Volt Single Phase Equipped With: Cast Iron Base
    Sunnen Horizontal Hone
    $2,650
    Sunnen Horizontal Hone
    Machine Specs: ID Range .060 - 6.5" Length 16" Speeds 200 - 1600 RPM Main HP 1/2 HP 115/230 Volt Single Phase Equipped With: Cast Iron Base
    Sunnen Horizontal Hone
    $1,750
    Sunnen Horizontal Hone
    Machine Specs: Length 16" Range .060 - 6.5" Speeds 200 - 1600 RPM Main HP 1/2 HP 115/230 Volt Single Phase Equipped With: Cast Iron Base Very Good Condition Inspect Under Power in Our Branchbur
    Duap Ag Ball Roller Tool and Cutter Grinder
    $2,750
    Duap Ag Ball Roller Tool and Cutter Grinder
    Machine Specs: Table Table Size 4" x 25-3/4" Travel 14-1/2" Swivels Right and Left Cross Travel 6" Wheel Head Swivels 90 Degr
    Rush Drill Grinder Model 258
    $3,950
    Rush Drill Grinder Model 258
    Drill Capacity.......................................................................3/32" to 3" Maximum Drill Length...................................................................16" Has the ability
    KO lee 2 AXis Hydraulic Feed Tool & Cutter Grinder
    $8,950
    KO lee 2 AXis Hydraulic Feed Tool & Cutter Grinder
    Machine Specs: Swing over table: 12-1/4" Distance between tailstocks: 32" Table working surface: 5-1/4" x 37-1/4" Longitudinal table travel: 20" Table travel per rev. of handwheel: 9/16"
    6" x 12" Sharp Ball Roller Hand Feed Surface Grinder.
    $1,750
    6" x 12" Sharp Ball Roller Hand Feed Surface Grinder.
    Machine Specs: Grinding Pocket 6" x 14" Spindle to Table 15" Grinding Wheel 8" HP 1.5 HP 220 Volt 3 Phase Graduations Cross .001 D
    6” x 12” Boyar Schultz Hand Feed Surface Grinder
    $1,750
    6” x 12” Boyar Schultz Hand Feed Surface Grinder
    Machine Specs: Grinding Pocket 6” x 12” Spindle Center to Table Top 15” Wheel Size 7” x 1/2” x 1-1/4” Motor 1 HP 220/440 Volt 3 Phase, Wired 220 Volt Weight 950 LBS Equipped With: 6” x 12” Walker Cermax Magnetic C
    6” x 12” Harig Hand Feed Surface Grinder
    $2,750
    6” x 12” Harig Hand Feed Surface Grinder
    Machine Specs: Grinding Pocket 6” x 12” Spindle Center to Table Top 15” Wheel Size 7” x 1/2” x 1-1/4” Motor 1.5 HP 220/440 Volt 3 Phase, Wired 220 Volt Weight 950 LBS Equipped With: 6” x 12” Walker Cermax Magnetic
    5" x 12" Taft Pierce Ball Roller Hand Feed Surface Grinder.
    $1,250
    5" x 12" Taft Pierce Ball Roller Hand Feed Surface Grinder.
    Grinding Pocket 5" x 12" Table To Spindle Center 12" 7" x 1/2" x 1-1/4" Grinding Wheel Equipped With" 6" x 12" Walker Chuck Model no 54 Torit Dust Collector - 1/4 HP
    6" x 18" Okamoto Hand Feed Surface Grinder
    $2,450
    6" x 18" Okamoto Hand Feed Surface Grinder
    Machine Specs: Table Size 6" x 20" Travels Long 18" Cross 7" Vertical 12" Down Feed .0004" Coarse and .0001 Fine Motor
    6” x 12” KO Lee Hydraulic Feed Surface Grinder
    $1,650
    6” x 12” KO Lee Hydraulic Feed Surface Grinder
    Grinding Pocket 6” x 12” x 16” Travels Long 14” Cross 7” Table top to Spindle Center 16” Main Motor 1HP 220 Volt 3 Phase Wheel Size 8” x 3/4” x 1-1/4” Weight 1200 LBS Approx Equipped With: 1 Axis Longitudinal Hyd
    10” x 36” Landis Universal Cylindrical Grinder
    $17,500
    10” x 36” Landis Universal Cylindrical Grinder
    Machine Specs: Swing 10” Centers 36” Table Swivels 16 Degrees Wheel Head Wheel Size 12” x 1” x 5” Swivel Upper 180 Degrees Lower 60 Degrees Clockwise 60 Degrees Counter Clockwise RPM 2005 and 2533 RPM Auto Infe
    16 GA x 36" Niagara Initial Pinch Power Bending Roll
    $2,950
    16 GA x 36" Niagara Initial Pinch Power Bending Roll
    16 Ga Capacity Mild Steel 36" Roll Length 3" Diameter Rolls Manual Adjustment Manual Drop End Forward/Reverse Runs Well Inspect Under Power in Our Branchburg NJ Warehouse
    48” x 14 Gauge Chicago Dries & Krump Finger Brake
    $2,950
    48” x 14 Gauge Chicago Dries & Krump Finger Brake
    Description Bending Width 48” Capacity in Mild Steel 14 gauge Stainless 18 Gauge (5) 5” Fingers (2) 4” Fingers (5) 3” Fingers Inspect in our Lebanon NJ warehouse Please Note some Fingers have been altered but our
    Updated Excello Ram type EDM
    $2,950
    Updated Excello Ram type EDM
    Updated Excello Ram type EDM, With 50 Amp Elox Centra Solid State Power Supply Travels Long 24” Cross 12” Ram 5” Knee 16” Equipped With: 50 Amp Elox Centa 75 Amp Solid State Power Supply Type B50 S, S/N 000161
    15 KVA Electro Arc Tap Disintegrator, Model 25A, S/N 9984
    $2,950
    15 KVA Electro Arc Tap Disintegrator, Model 25A, S/N 9984
    Capacity #2 - 1-1/4” Table Size 18” x 26” Head to Table Max. 30” Head Travel 9” Arm Cross Travel 24” Voltage 550 Volt Single Phase Head - Model LBH Excellent Condition Please note Voltage - You may need a transf
    4'6" x 12" Mas, Model VR 4, Radial Drill
    $6,950
    4'6" x 12" Mas, Model VR 4, Radial Drill
    Machine Specs: Column Diameter 12" Arm Length 4' 6" Head Travel 36" Arm Travel (Up & Down) 26" Spindle Taper #4 MT Spin
    4' x 13" American Radial Drill, Model Hole Wizard
    $7,950
    4' x 13" American Radial Drill, Model Hole Wizard
    Machine Specs: Column Diameter 13" Arm Length 4' Face of Column to spindle Center 4
    20” Vectrax Variable Speed Drill Press with Power Down Feed
    $1,750
    20” Vectrax Variable Speed Drill Press with Power Down Feed
    Machine Specs: Column 4” Dia Table 16” x 18” Working 19” x 22” Overall Speeds 150 - 1000 RPM 300 - 2000 RPM HP 1.5/.75 HP 220 Volt 3 Phase Quill Travel 5” Feeds .006, .004 and .008 Spindle Taper 3MT Equipped Wi
    25” Doall Geared Head Drill with Power Down Feed
    $2,950
    25” Doall Geared Head Drill with Power Down Feed
    Machine Specs: Column Diameter 5” Column to Spindle Center 12-1/2” Table Size 17” x 21” Spindle Speeds (8) 85 - 1460 RPM Spindle HP 1.0/1.2 2 HP / 2 Speed 440 Volt 3 Phase Spindle Taper 3 MT Feeds .015, .010, .007
    20” Blanchard 2 Axis CNC Vertical Spindle Rotary Surface Grinder
    $22,500
    20” Blanchard 2 Axis CNC Vertical Spindle Rotary Surface Grinder
    20” Blanchard 2 Axis CNC Vertical Spindle Rotary Surface Grinder, With Centroid Control Model 11-20, Machine Updated and Retrofitted 2000’s Machine Specs: Chuck Size 20” Swing Inside Guards 21” Max. Grinding Height
    18" x 12" x 16" Kitamura Vertical Machining Center
    $14,500
    18" x 12" x 16" Kitamura Vertical Machining Center
    18" x 12" x 16" Kitamura Vertical Machining Center, With Fanuc OM CNC Control Model Mycenter 1 , S/N 01781, New 1987 Machine Specs: Travels X 18" Y 1
    Blanchard 11-16, SN:3040
    $11,500
    Blanchard 11-16, SN:3040
    Blanchard 11-16, , SN: 3040 General Specifications: Electro Matic Neutrofier Magnetic Chuck Controller Blanchard Check Control Wet Base Standard #11 Specifications Voltage 440, 3 phase Equipped With:
    Stone 18” Abrasive Cut Off Saw, Model M75, SN:0013
    $2,200
    Stone 18” Abrasive Cut Off Saw, Model M75, SN:0013
    Stone 18” Abrasive Cut Off Saw, Model M75, SN:0013 Specifications: 18“ wheel Blade Speed: 2500 RPM Volts: 220/440, Cycle: 60, PH3 AMPS: 25/13 HP: 7.5 Max Condition: Machine can be demonstrated under p
    590.55" Schiess Froriep CNC Vertical Boring Mill
    $RFQ
    590.55" Schiess Froriep CNC Vertical Boring Mill
    Reference #25078 590.55" Schiess Froriep CNC Vertical Boring Mill Rebuilt & CNC Retrofit In 1999 Model: Schiess Froriep FEATURES: Siemens 840D CNC Control 2-Vertical Ram Heads Rebuilt & CNC Retro
    • Swing: 590.55"
      36" RED BUD #SM436 Straightener
      $RFQ
      36" RED BUD #SM436 Straightener
      36" RED BUD #SM436 Straightener Rolls: 5 over 6 Maximum Width: 36" Maximum Thickness: .070" Minimum Thickness: .020" EQUIPPED WITH: Pneumatic Loading Table (Peeler Arm) Overall Dimensions: 10' x 6' x 7' App
      Categories:
      Condition:
      Manufacturer:
      Location:
      Price:
      •  to 
      <Prev | 261 | 262 | 263 | 264 | 265 | 266 | 267 | 268 | 269 | 270 | Next>