buy & sell, new & used machinery, machine tools & equipment

<Prev | 181 | 182 | 183 | 184 | 185 | 186 | 187 | 188 | 189 | 190 | Next>
Refine: Viewing 9151 - 9200 of 20769 matches
Sort by:
Items Per Page:  20 |  50  |  100
22" Swing 40" Centers Sharp 2240B ENGINE LATHE, 4.5 thru hole, 15 hp, , D1-11
$RFQ
22" Swing 40" Centers Sharp 2240B ENGINE LATHE, 4.5 thru hole, 15 hp, , D1-11
NEW SHARP MODEL: 2240B PRECISION GAP BED ENGINE LATHE   FEATURES: D1-11 Camlock 4.5” Spindle Bore Direct Selection For Inch/Metric Threads One Piece Cast Meehanite Bed Quick Change Gearbox 15 HP Mo
2.5" Dia. 60' Length ft LNS Ecoload-L BAR FEED
$4,950
2.5" Dia. 60' Length ft LNS Ecoload-L BAR FEED
LNS ECOLOAD-L MAGAZINE BARFEED NEW: 2004   SPECIFICATIONS: BAR DIAMETER ......... 1/4" -2-1/2" BAR LENGTH ........... 12" -59" PUSHER LENGTH ........ 61" APPROX. WEIGHT ....... 900 LB
350 Ton 144" Bed Pacific FF350-12-I PRESS BRAKE, Hurco Autobend 5C CNC Back Gauge
$69,500
350 Ton 144" Bed Pacific FF350-12-I PRESS BRAKE, Hurco Autobend 5C CNC Back Gauge
  350 Ton x 12' Pacific Hyd. Press Brake W/Hurco 5C Back Gauge   MODEL FF350-12-I           S/N 9385          &nb
0.59" (Maximum Bevel Width) Used (Demo Machinery) BAILEIGH BEVELING MACHINE, Mdl. CM-
$11,595
0.59" (Maximum Bevel Width) Used (Demo Machinery) BAILEIGH BEVELING MACHINE, Mdl. CM-
Maximum Bevel Width 0.59" Bevel Angle 15° to 50° (Variable) Material Thickness 0.236" to 1.57" Blade Speed 2800 RPM Cutting Speed 11.4 fpm Motor 2 H.P. Dimensions (L x W x H) 2
Mahaffy & Harder Rollstock Packager
$RFQ
Mahaffy & Harder Rollstock Packager
Mahaffy & Harder Mdl. 730 Rollstock Packager, Ser. #730-122, approx. 360 mm W, 2 up configuration, 140 mm W X 125 mm pockets, 4 up sealing head, manual controls, 230 volts. Items Located in: Stockton, CA
Tetra Laval Tiromat Rollstock Packager
$RFQ
Tetra Laval Tiromat Rollstock Packager
Tetra Laval Mdl. 680 Tiromat Rollstock Packager, Ser. #686/101, approx. 550 mm between chains, 2 up die config 300 mm L X 240 mm with oval pockets, touchscreen controls, approx. 330 mm film advance. Item Located in: S
Dual Shaft Vacuum Paddle Blender
$RFQ
Dual Shaft Vacuum Paddle Blender
AMFEC Mdl. 210 Stainless Steel Continuous Vacuum Stuffer, single shaft paddles, stainless steel auger, 36" W X 48" L X 32" D, hydraulic operation, 230/460 volt motor on pump, pneumatic lid, Ser. #920346.
Stainless Steel Continuous Vacuum Stuffer,
$RFQ
Stainless Steel Continuous Vacuum Stuffer,
AMFEC Mdl. 210 Stainless Steel Continuous Vacuum Stuffer, single shaft paddles, stainless steel auger, 36" W X 48" L X 32" D, hydraulic operation, 230/460 volt motor on pump, pneumatic lid, Ser. #950157, m
Linking & Hanging System
$RFQ
Linking & Hanging System
Hitec Mdl. Hitec-M-3Z High Speed Linking & Hanging System, Ser. #253, for artificial casings, linking chain, 6" between links, looper chain. Item Located in: Stockton, CA
Griffith Emulsifier
$RFQ
Griffith Emulsifier
Griffith Mdl. FD225 Emulsifier, dual plate, 100 h.p., 230/460 volt motor, stainless steel hopper, on painted steel stand, 4' W X 4' L X 57" T, with stainless steel stairs 24" W X 4' T Item Locate
Stainless Steel Extructor
$RFQ
Stainless Steel Extructor
Rietz Mdl. RE-15-K7E328 Stainless Steel Extructor, 25 h.p., 230/460 volts motor, Ser. #RE-770240, 59" W X 51" D carriage, hydraulic power pack, 7.5 h.p., 230/460 volt motor. Item Located in: Stockton, CA
Weiler Grinder
$RFQ
Weiler Grinder
Weiler Mdl. 1668 Grinder with top mounted stainless steel hopper, stairs with platform, 50 h.p. grinder motor, 11" plate, stainless steel barrel, auger and ring, 1992-5HA gearbox, Weiler stainless steel auger puller
Vacuum Paddle Blender
$RFQ
Vacuum Paddle Blender
AMFEC Mdl. 510 Dual Shaft Vacuum Paddle Blender, approx. 8000 Lb. capacity, 6' W X 128" L X 48" D dual troughs, pneumatic lid, pneumatic dual front end discharge, hydraulic operation, 60 h.p., 460 volt moto
2008 CATERPILLAR D6T LGP W/ 3RD VALVE & SWEEPS - E7108
$78,500
2008 CATERPILLAR D6T LGP W/ 3RD VALVE & SWEEPS - E7108
6 CYL ENGINE, 3 SPEED TRANS, 36 IN PADS, STRAIGHT/ TILT BLADE, REAR SCREENS, SWEEPS, 3RD VALVE FOR RIPPER 5383 HOURS SHOWING
Giddings & Lewis 60” / 72” CNC VBM, 75HP, w/G&L 8000B CNC Control,
$RFQ
Giddings & Lewis 60” / 72” CNC VBM, 75HP, w/G&L 8000B CNC Control,
Giddings & Lewis 60” / 72” CNC VBM Stock #20164-IS Year of Mfg: 1978 / Rebuilt 1996 Serial Number: 513-0054-78/96 Specifications: Table Size: 60” Swing: 72” Table Speed Range: 3.8-333 RPM Table Motor: 75
  • Swing: 72"
    2011 VOLVO DT240 R W/ OROPS - E7096
    $43,500
    2011 VOLVO DT240 R W/ OROPS - E7096
    CUMMINS QSB3.3 ENGINE, 3 SPEED TRANS, DUAL DRUM, 11.00 - 20 TIRES, SINGLE WATER TANK, FRONT SPRAY HEADS, OROPS, 2651 HOURS SHOWING.
    2012 DEERE 750K LGP CAB W/ A/C & HEAT - E7089
    $83,500
    2012 DEERE 750K LGP CAB W/ A/C & HEAT - E7089
    6 CYL JOHN DEERE ENGINE, 3 SPEED TRANS, JOYSTICK STEERING, 34 IN PADS, 12 FT 6 IN 6 WAY BLADE, ENCLOSED CAB W/ A/C & HEAT
    2013 DEERE 750J LGP CAB W/ A/C & HEAT - E7088
    $77,500
    2013 DEERE 750J LGP CAB W/ A/C & HEAT - E7088
    6 CYL JD ENGINE, ENCLOSED CAB W/ A/C & HEAT.
    2015 CATERPILLAR 930M W/ QUICK CONNECT & CAB W/ A/C & HEAT - E7085
    $119,500
    2015 CATERPILLAR 930M W/ QUICK CONNECT & CAB W/ A/C & HEAT - E7085
    8 FT 3 IN GP BUCKET, QUICK CONNECT, 20.5 R 25 TIRES, 3RD VALVE, ENCLOSED CAB w/ A/C & HEAT, REAR VIEW CAMERA. 2996 HOURS SHOWING
    2014 CATERPILLAR D4K2 XL ENCLOSED CAB W/ A/C & HEAT - E7071
    $69,500
    2014 CATERPILLAR D4K2 XL ENCLOSED CAB W/ A/C & HEAT - E7071
    6 CYL CAT ENGINE, HYDRO-STATIC TRANS, JOYSTICK STEERING, 14 IN PADS, 8 FT 6 WAY BLADE, ENCLOSED CAB W/ A/C & HEAT. 4891 HOURS SHOWING
    32/44" X 120" LEHIGH HEAVY DUTY GAP BED LATHE, MODEL 32120B
    $RFQ
    32/44" X 120" LEHIGH HEAVY DUTY GAP BED LATHE, MODEL 32120B
    32/44" X 120" LEHIGH HEAVY DUTY GAP BED LATHE MODEL 32120B S/N 00129 NEW 2001 SWING OVER BED ------------------------------- 33" SWING OVER CROSS SL
    • Swing: 32"
    • Centers: 120"
      16" X 40" BRIDGEPORT ROMI EZ-PATH CNC/MANUAL ENGINE LATHE
      $RFQ
      16" X 40" BRIDGEPORT ROMI EZ-PATH CNC/MANUAL ENGINE LATHE
      16" X 40" BRIDGEPORT ROMI EZ-PATH CNC/MANUAL ENGINE LATHE S/N 002-078821-325 NEW 1994 SWING OVER BED -------------------------------- 16.5" SWING OVER CROSS SLIDE
      • Swing: 16.5"
        22 TON TRUMPF TC2000R BOSCH TYPE 3, MFG:1999
        $RFQ
        22 TON TRUMPF TC2000R BOSCH TYPE 3, MFG:1999
        22 TON TRUMPF TRUMATIC TC2000R TURRET PUNCH W/BOSCH TYPE 3 CONTROL MFG:1999 - APPROXIMATELY 17,000 HOURS
        • Tonnage: 22T
          TRUMPF TRULASER 1030, 2500 WATT, 5' X 10', MFG:2013
          $RFQ
          TRUMPF TRULASER 1030, 2500 WATT, 5' X 10', MFG:2013
          2500 WATT TRUMPF TRULASER 1030 CO2 LASER MFG:2013 APPROX:21,500 TOTAL LASER ON HOURS
          8 TON HAEGER MODEL 824 ONE TOUCH LITE INSERTION PRESS,BOWL FEEDS,PC, MFG:20
          $RFQ
          8 TON HAEGER MODEL 824 ONE TOUCH LITE INSERTION PRESS,BOWL FEEDS,PC, MFG:20
          8 TON HAEGER 824 ONE TOUCH LITE HYDRAULIC INSERTION PRESS W/PC BASED TOUCH SCREEN CONTROL, BOWL FEEDS,TOOLING MFG:2012
          • Tonnage: 8T
            22 TON AMADA EM2510NT NT SERVO-ELECTRIC TURRET PUNCH PRESS MFG:2004
            $RFQ
            22 TON AMADA EM2510NT NT SERVO-ELECTRIC TURRET PUNCH PRESS MFG:2004
            22 TON AMADA EM2510NT NT SERVO-ELECTRIC TURRET PUNCH PRESS MFG:2004
            • Tonnage: 22T
              RAS 79.26-2 MULTIBEND-CENTER MFG:2013
              $RFQ
              RAS 79.26-2 MULTIBEND-CENTER MFG:2013
              RAS 79.26-2 MULTIBEND-CENTER MFG:2013
              2013 DEERE 750K LGP W/ CAB W/A/C & HEAT - E7090
              $82,500
              2013 DEERE 750K LGP W/ CAB W/A/C & HEAT - E7090
              6 CYL JD ENGINE, 3 SPEED TRANS, JOYSTICK STEERING, 34 IN PADS, 12 FT 4 IN SIX WAY BLADE, ENCLOSED CAB W/ A/C & HEAT
              24" x 1/2" Torrance API Tube Mill
              $RFQ
              24" x 1/2" Torrance API Tube Mill
              Make: Torrance (USA) Model: TMC - 450 Pipe Diameter: 6-5/8" - 24" Wall Thickness: .030" - .500" Material Grade: API X42, X52, X60, X70 Maximum Pipe Length: 12.8 meters Entry Coil Car Cone T
              • Maximum diameter: 24"
              • Maximum thickness: 0.5"
                2011 CATERPILLAR 321DLCR W/ ENCLOSED CAB W/ A/C & HEAT - E7106
                $86,500
                2011 CATERPILLAR 321DLCR W/ ENCLOSED CAB W/ A/C & HEAT - E7106
                6 CYL CAT ENGINE, 32 IN PADS, 46 IN BUCKET, ENCLOSED CAB W/ A/C & HEAT
                2011 CATERPILLAR M318 D W/ PLUMBING ON STICK W/ CAB W/ A/C & HEAT E7104
                $76,500
                2011 CATERPILLAR M318 D W/ PLUMBING ON STICK W/ CAB W/ A/C & HEAT E7104
                6 CYL CAT ENGINE, POWERSHIFT TRANS, 10.00 - 20 IN TIRES , 44 IN BUCKET, PLUMBING ON STICK, ENCLOSED CAB W/ A/C & HEAT
                2012 CATERPILLAR M318 D W/ PLUMBING ON STICK & CAB W/ A/C & HEAT -
                $87,500
                2012 CATERPILLAR M318 D W/ PLUMBING ON STICK & CAB W/ A/C & HEAT -
                6 CYL CAT ENGINE, 10.00-20 TIRES, 70 IN BUCKET, TWIST A WRIST, MANUAL THUMB, ENCLOSED CAB W/ A/C & HEAT
                10" x 6" KALAMAZOO MODEL H10A HORIZONTAL BAND SAW
                $RFQ
                10" x 6" KALAMAZOO MODEL H10A HORIZONTAL BAND SAW
                <p><strong>10" x 6" KALAMAZOO MODEL H10A HORIZONTAL BAND SAW</strong></p> <p>Serial No. 83016</p> <p>Capacity: 10 inch round and 6 inch x 10 inch rectangular</p> <p>B
                4000 LB. P.A. PALLETIZER PR4 FLAT STRIP PALLET DECOILER
                $RFQ
                4000 LB. P.A. PALLETIZER PR4 FLAT STRIP PALLET DECOILER
                4000 LB. P.A. PALLETIZER PR4 FLAT STRIP PALLET DECOILER MAXIMUM PALLET WEIGHT --------------------- 4,000 LBS. TABLE DIAMETER ------------------------------- 42" MAXIMUM STOCK WIDTH -----------------
                • Maximum weight capacity: 4000Lb
                • Maximum coil width: 6"
                  Micro Weld Model RW-1 Ring Butt Welder
                  $RFQ
                  Micro Weld Model RW-1 Ring Butt Welder
                  No description providedWire Diameter Range.030" - .187" (.762mm - 4.75mm) Transformer KVA5 KVA Heat Selections10 - 99% Upset MethodPneumatic Clamping MethodPneumatic Electrics460V Approx. Floor Size24" x 24" x 48" Approx
                  • Power: 5KVA
                  • Power: 5KVA
                    Micro Weld Model RW-2 Ring Butt Welder
                    $RFQ
                    Micro Weld Model RW-2 Ring Butt Welder
                    No description providedWire Diameter Range.080" - .250" (2mm - 6.35mm) Transformer KVA10 Heat Selections10 - 99% Upset MethodPneumatic Clamping MethodPneumatic Electrics460V Approx. Floor Size24" x 24" x 48" Approx. Weig
                    • Power: 10KVA
                    • Power: 10KVA
                      Lubow Wire Nibbler Model C-1 Trimmer
                      $RFQ
                      Lubow Wire Nibbler Model C-1 Trimmer
                      No description providedMaximum Wire Diameter3/8" Approx. Floor Size27" x 23" x 41"H Approx. Weight355 lbs
                      2018 Bobcat E85 w/ Hydraulic Thumb & Cab W/ A/C & Heat - Stock Numb
                      $89,500
                      2018 Bobcat E85 w/ Hydraulic Thumb & Cab W/ A/C & Heat - Stock Numb
                      4 CYL YANMAR ENGINE, 18 IN RUBBER TRACKS, 36 IN BUCKET, QUICK CONNECT, 7 FT 6 IN BLADE, PLUMBING ON STICK, HYDRAULIC THUMB, ENCLOSED CAB W/ A/C & HEAT.
                      US Baird Model #3 Fourslide
                      $RFQ
                      US Baird Model #3 Fourslide
                      No description providedWire Capacity3/16" Maximum Width Strip1-1/8" Maximum Feed Length10" Operating Speed120 RPM Motor5 HP Electrics230V/460V/60Hz/3 Phase Approx. Floor Size68"LR X 60"FB X 48" H Approx. Weight2,300 LBS
                      Di-Acro #2 Hand Bender
                      $RFQ
                      Di-Acro #2 Hand Bender
                      No description providedMaximum Radius Without Quik-Lok9" Maximum Radius With Quik-Lok7" Height of Standard Forming Nose1" Operating Leverage29" Round Mild Steel Bar Capacity1/2" Square Mild Steel Bar Capacity3/8" Steel T
                      Lubow ML6 Single Stop Table Bender
                      $RFQ
                      Lubow ML6 Single Stop Table Bender
                      No description providedCapacity3 Pieces 5/16" Wire 2 Pieces 3/8" Wire Rotation400 Degrees Rotating Disc6" Table Size24" x 60" With Infinitely Adjustable Bending Pos
                      2008 CATERPILLAR 12M W/ A/C & HEAT - E7036
                      $98,500
                      2008 CATERPILLAR 12M W/ A/C & HEAT - E7036
                      6 CYL CAT ENGINE, 8 SPEED TRANS, 14 FT WIDE BLADE, 17.5, 25 TIRES, ENCLOSED CAB W/ A/C & HEAT
                      1/8" National High Speed Single Die Tubular Rivet Header
                      $RFQ
                      1/8" National High Speed Single Die Tubular Rivet Header
                      No description providedMaximum Cutoff Diameter1/8" Maximum Shank Length1/2" Cutoff Length3/16" - 5/8" (Min/Max) Pierced Hole5mm Electrics220V Approx. Weight4,000 lbs B
                      2012 BOBCAT E2M W/MANUAL QUICK CONNECT & PLUMBING ON STICK -W6815
                      $27,500
                      2012 BOBCAT E2M W/MANUAL QUICK CONNECT & PLUMBING ON STICK -W6815
                      3 CYL KUBOTA ENGINE, 12 IN RUBBER TRACKS, 24 IN BUCKET, MANUAL QUICK CONNECT, 5 FT WIDE BLADE, PLUMBING ON STICK, PATTERN CHANGER.
                      1/8" National High Speed Single Die Tubular Rivet Header
                      $RFQ
                      1/8" National High Speed Single Die Tubular Rivet Header
                      No description providedMaximum Cutoff Diameter1/8" Maximum Shank Length1/2" Cutoff Length3/16" - 5/8" (Min/Max) Pierced Hole5mm Electrics220V Approx. Weight4,000 lbs B
                      1/2" Lewis 9C Straighten and Cut Machine
                      $RFQ
                      1/2" Lewis 9C Straighten and Cut Machine
                      No description providedMaximum Wire Diameter1/2" (.500") Minimum Wire Diameter1/4" (.250") Maximum Cutoff Length12' Maximum Speed170 FPM Motor50 HP With Tooling &a
                      1996 SNK FSP-120V 5 Axis VMC Fanuc 16-M Table 124" x 48" 10K RPMs
                      $99,000
                      1996 SNK FSP-120V 5 Axis VMC Fanuc 16-M Table 124" x 48" 10K RPMs
                      1996 SNK FSP-120V 5 Axis Vertical Machining Center Fanuc 16-M Table 124" x 48" 10K RPMs Conveyor Under Power Ready for Inspection Please wait for your shipping quote and invoice before sending payment.
                      • Table width: 48"
                      • Table length: 124"
                        Hitachi Seiki VM40 Vertical Machining Seicos 22 x 16 x1 6 6K RPM Table 30 x
                        $8,900
                        Hitachi Seiki VM40 Vertical Machining Seicos 22 x 16 x1 6 6K RPM Table 30 x
                        Under Power Ready for Inspection Please wait for your shipping quote and invoice before sending payment. EZ Systems Machine Reference Number: ez20562 Location: Paramount, California 97023 X 22 " Y 16 &q
                        • Table width: 30"
                        • Table length: 16"
                          800 LB. POWERED HORIZONTAL COIL REEL
                          $RFQ
                          800 LB. POWERED HORIZONTAL COIL REEL
                          800 LB. POWERED HORIZONTAL COIL REEL MAXIMUM COIL WEIGHT ----------------------- 800 LBS. MAXIMUM STOCK WIDTH ----------------------- 5" MAXIMUM COIL DIAMETER --------------------- 36" ELECT
                          • Maximum weight capacity: 800Lb
                          • Maximum coil width: 5"
                            GMC HS-1025E 10 ft x 1/4 in. Heavy Duty Hydraulic Metal Shear
                            $RFQ
                            GMC HS-1025E 10 ft x 1/4 in. Heavy Duty Hydraulic Metal Shear
                            CALL (386) 304-3720 FOR AVAILABILITY FEATURES: This 120" wide hydraulic shear can handle up to a 1/4" mild steel. This heavy duty machine will trim 10 foot sheets with ease! ISO 9001 certified Taiwan mach
                            • Maximum thickness: 0.25"
                            • Cutting length: 120"
                              Categories:
                              Condition:
                              Manufacturer:
                              Location:
                              Price:
                              •  to 
                              <Prev | 181 | 182 | 183 | 184 | 185 | 186 | 187 | 188 | 189 | 190 | Next>