buy & sell, new & used machinery, machine tools & equipment

<Prev | 171 | 172 | 173 | 174 | 175 | 176 | 177 | 178 | 179 | 180 | Next>
Refine: Viewing 17601 - 17700 of 20769 matches
Sort by:
Items Per Page:  20 |  50 |  100
Heat Exchanger, oil based
Heat Exchanger, oil based
Kearney Graphite Block Type Heat Exchanger
One used Kearney Graphite Block Type Heat Exchanger, Approximate 10 Square Feet. Graphite contact areas. Process and service sides rated 75 psi at 360 degrees F. (2) 1-1/2", and (2) 4" openings. Serial# 8537-6-20-10, bui
170 gallon Will-Flow s.s. jacketed Tank w/ Scott 25hp Turbon Disperser
One used 170 gallon Will-Flow s.s. jacketed Tank, straight side is 34", 90 psi @ 330F , Nat. Board 3308, Serial 29279-2, with Scott Turbon 25 h.p. Disperser, Model TMS525, Serial 2905, total height is 98", 50" wide, from
2,000 KW Diesel Generator
(3) available
EDWARDS LYPHOLIZER MODEL 04                 #3327
ONE (1) EDWARDS LYOFLEX MODEL 04. THE MACHINE FEATURES FULL STAINLESS STEEL CHAMBER CONSTRUCTION. THERE ARE THREE 12" X 18" STAINLESS STEEL SHELVES, THAT CAN HANDLE UP TO 750 23MM VIALS. VOLUME OF BULK MATERIA
USIFROID LYPHOLIZER MODEL SMH-50            #3417
SHELF SIZE 37"L X 19"W, S.S., NO STOPPERING
STOKES MODEL 24PV FREEZE DRYER              #3785
ONE (1) STOKES FREEZE DRYER MODEL 24-PV. THE UNIT FEATURES INTERNAL STOPPERING, AND ADJUSTABLE SHELF- SPACING. IT HAS A 24 SQ. FT. SHELF AREA, AND ONLY TAKES UP ABOUT 32 SQ. FT. OF FLOOR SPACE. THE
EDWARDS LYO DRY MODEL 03 LYOPHILIZER
ONE EDWARDS LYO DRY MODEL 03, WITH 4.32 SQ. FT. OF SHELF SPACE. SHELVES ARE HOLLOW SILICONE COOLED 316 S.S., WITH TEMP. RANGE OF -40 DEG. C. TO 60 DEG. C. REGULATED TO 1 DEG. C. MAX. CONTAINER WIDTH IS 240M
EDWARDS LYOMASTER S04 FREEZE DRYER
EDWARDS LYOMASTER S04 FREEZE DRYER
Edwards Freeze Dryer, model Lyoflex 08
One used BOC Edward freeze dryer, model Lyoflex 08, 316L stainless steel contact surfaces, 9 sq ft useable shelf space with (3) 18" x 24" shelves, 3.1" shelf spacing, stoppering, low temp design rated to -55 c shelves
Virtis 25-SRC-3MS Freeze Dryer
Virtis 25-SRC-3MS Freeze Dryer
Labconco Freeze Dryer, lot of (2) w/ 3 Vacuum Pumps
Labconco Freeze Dryer, lot of (2) w/ 3 Vacuum Pumps
Virtis Genesis Freeze Dryer 2, shelves, with stoppering, Mdl 12EL
One used Virtis Genesis Freeze Dryer 2- shelves, with external condenser, with stoppering, Mdl 12EL, new 1997
Wrapade 6" Vertical Strip Packager
Wrapade Compact Vertical Strip Packer- 2003 machine in excellent condition. Currently set up to handle a 6" wide strip, with 2 tablets per pouch. Comes with Panel Mate Touch screen controls, Lot/Exp printer, vert/horiz p
MGS Wallet Machine
MGS Wallet Machine
MultiVac C500 Poucher
One used MultiVac C500 Poucher, rated 2-3 cycles/minute, built 2001, serial 1570, 208/60/3 and was doing 14" x 6" foil pouches of powder, with Manual
Urania Pouch-Pro Model 3500P Poucher
One used Urania Pouch-Pro Model 3500P Poucher, 120/60/1, set up for 14" x 6" dry pouches, never used
Pack Star Vertical Form/Fill/Seal w/ 6 Feeders & Date Stamp
Pack Star Vertical Form/Fill/Seal w/ 6 Feeders & Date Stamp
Optima SD1-P Packager
Optima SD1-P Packager
Klockner Bartelt Pouch Filling Line
One used Klockner Bartelt pouch filling line. Output speeds of up to 150 pouches per minute. Line still installed. Inspections can be arranged by request. Packaging line consist of the following equipment: -Klockner Bar
AZCO Sur-Pak pouch dispenser, model SP-110
One used AZCO Sur-Pak pouch dispenser, model SP-110, speeds up to 200 cuts/minute, with up to 4" max web width, up to .4" max web thickness, 36"- 42" adjustable delivery height, on stand, serial# 200057D
20 cu ft B and G tote
One used 20 cu ft B and G tote, stainless steel construction, approximately 42" x 42" x 15" straight side x 18" cone bottom, 18" top port, 3" top nozzle, 6" bottom outlet on legs.
20 cu ft B and G tote
One used 20 cu ft B and G tote, stainless steel construction, approximately 42" x 42" x 15" straight side x 18" cone bottom, 18" top port, 3" top nozzle, 6" bottom outlet on legs.
WaterLink reverse osmosis unit, type MS-30K
One (1) used WaterLink reverse osmosis unit, type MS-30K, 6 pass with (2) Grundfos vertical pumps, on unitized base, with WaterLink ultra filtration skid, type UF-45K with provision for (4) filters, and circulation skid.
LANGLEY PLATFORM POWERLIFT                  #3361
ONE (1) LANGLEY PLATFORM POWERLIFT. THE MACHINE HAS A CAPACITY OF 4000 POUNDS. THE PLATFORM DIMENSIONS ARE 50" LENGTH X 44" WIDTH. THE MOTOR IS 3 H.P., 208- 230/460 VOLTS, 3 PHASE, 60 HZ.
$RFQ
S.S. LIFT
S.S. LIFT
$4,000
FORKLIFT
FORKLIFT
$5,000
FORKLIFT
FORKLIFT
$3,000
BIG JOE LIFT
RATED TO 1500 LBS.
Toyota 3000 lbs Forklift
Toyota 3000 lbs Forklift
Crown Electric WP2000 4500 lb. Electric Pallet Jack
One used Crown Electric WP2000 4500 lb. Electric Pallet Jack
Crown Electric 20MT 2000 lb. Electric Pallet Jack
One used Crown Electric MT20 2000 lb. Electric Pallet Jack
Yale Electric Pallet Jack
One used Yale Electric Pallet Jack
Crown Electric SC4000 2950 lb. Electric Forklift
One used Crown Electric SC4000 2950 lb. Electric Forklift
EALHW Baker Electric 12000 lb. Electric Platform Jack
One used EALHW Baker Electric 12000 lb. Electric Platform Jack
Caterpiller 1400 kg Electric Forklift
One used Caterpiller 1400 kg Electric Forklift
Crown Electric 2000 lb Forklift
One used Crown Electric 2000 lb Forklift
Rico 4000 lb Electric Pallat Jack
One used Rico 4000 lb Electric Pallat Jack
$RFQ
Man Lift
One used Man Lift
Yale Electric 15000 lb Platform Jack
One used Yale Electric 15000 lb Platform Jack
Clark Electric 3000 lb Fork Lift
One used Clark Electric 3000 lb Fork Lift
Crown Electric Lifts
One used Crown WR 1700 lb Electric Fork Lift
Hyster Forklift
Hyster Forklift
STAINLESS STEEL BIN
STAINLESS STEEL BIN ON CASTERS WITH SIDE BOTTOM DISCHARGE.
OZONE SYSTEMS CO.
WAS OZONATING SUPPLY FOR 22 HEAD CEMAC FILLER DOING GALLON BOTTLES.
CM500 PE (electrical and pneumatic) panel
CM500 PE (electrical and pneumatic) panel. This panel is the main control panel for the blender and contains the plc, input output cards, circuit breakers, power supplies, solenoid manifolds and other electrical and pneu
Bertuzzi Finisher, Model PAM0599
One used Bertuzzi Finisher, Model PAM0599, 6" diameter feeder, cage is 39" x 12" diameter, 5.5 KW (7.3 h.p.) Drive, 720/415/60/3, 1740 rpm motor
Taylor Slushie Machine
Taylor Slushie Machine
AEROMATIC BOWL ONLY                         #2993
BOWL ONLY 52 1/2" DIAMETER ON CART.
GLATT BOWL ONLY                             #2994
BOWL ONLY 57" DIAMETER. BOTTOM SCREEN. MOUNTED ON CASTERS.
GLATT PARTS
GLATT PARTS
GLATT WURSTER
GLATT WURSTER
Glatt GPCG30 Inserts and Bowls
One used Glatt GPCG30 spray granulation insert, with product bowl, 316 stainless steel construction, on stands. One used Glatt GPCG30 roto granulation insert, with expansion chamber, 316 stainless steel construction.
Glatt 18" Wurster
One unused Glatt 18” Macro Wurster, Comm 8197WU18 (Tag MW2285). The Macro Wurster is unused. It is designed specifically to assist with elimination of “dead spaces” that can be associated with standard Wurster inserts. T
Glatt 18" Wurster
One unused Glatt 18” Macro Wurster, Comm 8197WU18 (Tag MW2285). The Macro Wurster is unused. It is designed specifically to assist with elimination of “dead spaces” that can be associated with standard
Glatt Insert for GPCG60, 56" tall x 62" o.d. upper, 36" o.d. lower
Glatt Insert for GPCG60, 56" tall x 62" o.d. upper, 36" o.d. lower
Glatt 125 liter top spray bowl for GPCG-30
One used 125 liter top spray bowl. Has pneumatic actuator and valve for pneumatic side discharge of product for GPCG-30. The trolley is present but no casters.
Glatt 68 liter/125 liter top spray bowl expansion chamber for GPCG-30
One used 68 liter/125 liter top spray bowl expansion chamber- has large viewing bulleye window, small bulleye window for lamp, three nozzle ports with covers, locking pin with wheel to lock product bowls in place. Has on
Glatt lower plenum for GPCG-30
One used Glatt lower plenum for GPCG-30
Glatt RI620 rotor product bowl with two tangential spay nozzles for GPCG-30
One used RI620 rotor product bowl with two tangential spay nozzles in place. Has two pneumatic valves for pneumatic side discharge control
Glatt 68 liter top spray product bowl for GPCG-30
One used 68 liter top spray product bowl. Has pneumatic actuator and valve for pneumatic side discharge of product. Trolley for bowl is present with casters
Glatt 18” wurster for GPCG-30
One used 18” wurster product bowl with bottom plate and spray nozzle attached
$9,500
Glatt Column
Glatt Column
Illinois Blower 15 h.p. 1117 cfm Blower, for GPCG-30
One used Illinois Blower 15 h.p. 1117 cfm Blower, 230/460/60/3, serial 2M3566 for GPCG-30
One used Illinois Blower 30 h.p. 1760 cfm Blower for GPCG-30
One used Illinois Blower 30 h.p. 1760 cfm Blower, serial 2M1531, 230/460/60/3 for GPCG-30
Ventex Inlet Isolation Valve, Type DN300/C/S/S4 for GPCG-30
Ventex Inlet Isolation Valve, Type DN300/C/S/S4 for GPCG-31
Ventex Exhaust Isolation Valve, Type DN300/C/S/S4 for GPCG-30
Ventex Exhaust Isolation Valve, Type DN300/C/S/S4 for GPCG-31
Fike E30 016 08 -1, 8" Valve, 150 ANSI flange
Fike E30 016 08 -1, 8" Valve, 150 ANSI flange
Fike E30 016 08 -1, 8" Valve, 150 ANSI flange
Fike E30 016 08 -1, 8" Valve, 150 ANSI flange
Rexroth Glatt CM500 Blender Hydraulic Pump Unit
CM500 blender hydraulic pump unit. Contains hydraulic pump, hydraulic reservoir and other various hydraulic components to provide hydraulic fluid to the IBC blender hydraulic motors. Has an electronic controller attached
OIT control panel with Bebco air purge controls for Glatt CM500 Mixer
OIT control panel with Bebco air purge controls. The unit is missing the front panel door and OIT panel screen. The unit was stored outside with electrical components exposed top elements.
Flanders After Filter for GPCG-30
Flanders After Filter for GPCG-30, 550/PEAFAHU 9, rm 1315 CT02, Flanders #BF1-1H2W-6GGF-304 D3(SP). Flanders job #22-255
Flanders Afterfilter with prefilter and HEPA filter sections for GPCG-30
Flanders After Filter with prefilter and HEPA filter sections for GPCG-30, Flanders # BF1-1H2W-GGGF-304-D3(SP). Has DP transmitter for HEPA filter monitoring and a Magnehelic gage for prefilter.
IEDCO Discharge Station, DDS-IED-001, Model 9787
IEDCO Discharge Station, DDS-IED-001, Model 9788
CM500 Electrical Panel
CM500 Electrical Panel
IEDCO Discharge Station, DDS-IED-001, Model 9787
IEDCO Discharge Station, DDS-IED-001, Model 9788
Contol Panel for GPCG-30, CN: 7090, 1771DC , 4003-FC
Contol Panel for GPCG-30, CN: 7090, 1771DC , 4003-FC, OIT control panel with Bebco air purge controls. Panel has OIT mounted on front door of enclosure. Looks like it probably has all parts but it was stored outside and
CM500 blender yoke arm with inflatable seals to hold IBC in place while blending.
CM500 blender yoke arm with inflatable seals to hold IBC in place while blending.
Glatt Panel for GPCG-30 Serial 7090, pressurized enclosure w/ Baldor pump
Glatt Panel for GPCG-30 Serial 7090, pressurized enclosure w/ Baldor pump
GLATT GPCG5 COATER/GRANULATOR
ONE USED GLATT GPCG5, STAINLESS WITH 5 KG. SPRAY GRAN- ULATION BOWL, 15" WURSTER COLUMN, BACK BLOWOUT, WITH SOLVENT RECOVERY.
GLATT WSG-300 FLUID BED DRIER
360 KG/BATCH CAPACITY, 55-60 MINUTES/BATCH. BOUGHT 1972. 3000 RPM, 415/50/3, 32.6 AMPS. COMPLETE EXCEPT FOR NO DUST COLLECTOR AND PANEL NEEDS WORK. TWO PRODUCT BOWLS.
AEROMATIC MODEL S3 TYPE 4111
14813. 460 VOLTS HEATING CAPCITY IS 36000, 5 HP MOTOR.
GLATT WSG-15 FLUID BED DRYER
WITH WURSTER COLUMN, GRANULATOR & 3 PRODUCT CARTS. SANITARY STAINLESS STEEL CONSTRUCTION. FIFTEEN KG PER BATCH. STEAM HEATED, SELF CONTAINED WITH CONTROL PANEL.
GLATT WST-120 FLUID BED DRIER
ONE (1) USED GLATT MODEL WST-120 FLUID BED DRIER. THE MACHINE WAS MANUFACTURED IN 1987. IT FEATURES FULL STAINLESS STEEL CONSTRUCTION, CONTROL PANEL, AND PRODUCT BOWL.
GLATT WSG-5 FLUID BED COATER/GRANULATOR
ONE USED GLATT FLUID BED DRYER/GRANULATOR, STAINLESS STEEL CONSTRUCTION WITH 5 KG AND 1 KG BATCH CAPACITIES, STEAM HEATED WITH BLOWER, BACK DOOR BLOWOUT DESIGN. RATED 16500 KCAL. COMPLETE WITH CONTROL PANEL.
Glatt GPCG300 Fluid Bed Granulator w/ 2 Wursters
One used Glatt Fluid Bed Dryer/Granulator, Model GPCG300, stainless steel construction, 2 bar capacity, with Wurster column with 14 nozzles and controls, Serial No. 4233, New 1985
Glatt GPCG5 Granulator
One used Glatt fluid bed dryer / granulator system, model GPCG5, stainless steel construction, spray granulation chamber, steam heated, complete with air handling, 7.5 KW blower, misc. duct work and controls, 480 volt, s
Glatt GPCG5 Fluid Bed Drier/Granulator
Glatt GPCG5 Fluid Bed Drier/Granulator
Glatt GPCG 15/30 Dryer
One used Glatt fluid bed dryer/granulator, model GPCG15/30, stainless steel construction, spray granulation insert with product hopper and cart, steam heated with HEPA filtration, top blow out doors and control panel, se
Aeromatic S-6 Fluid Bed Spray Granulator
One used Aeromatic S-6 Fluid Bed Spray Granulator, 50 liter container volume, approx. 200-250 kg capacity, 2 bar pressure shock resistance, serial 20.371, max. spray volume is .8-1.2 liters/minute, steam consumption is 6
GEA/Aeromatic MP-Micro Fluid Bed Dryer
One used Aeromatic Fielder lab fluid bed dryer/ granulator, model MP-Micro, bench top design, stainless steel enclosure with spray granulation and wurster chamber, electrically heated, 110 volt with controls, serial# 991
Glatt GVT400 Vacuum Dryer complete w/ Solvent Recovery System
One used Glatt Gvt 400-fluid Bed Dryer Machine Specifications: Manufacturer: Glatt Model: Gvt 400 Electrical: 220 V, 50 Hz, Serial Number: 5122 Approx. Dimensions: 12' 10" X 6 ' W X 6' D (main Unit) Features: I
Glatt GPCG5 Granulator
One used Glatt Fluid Bed Dryer/Granulator, Model GPCG5, stainless steel construction, 2 bar capacity with spray granulation insert, wurster, steam heated, complete with air handling and blower, and controls
JEIL 1200 liter / 500kg fluid bed dryer
JEIL 1200 liter fluid bed dryer. Model: JIM-D120. Serial: 99-26. MFG in: 1999. This machine is suitable for drying powder or granule. Meets GMP requirements. Batch capacity: 1200 liters, 500kg. Features: PLC controls, 2
Glatt GPCG30 Granulator
One used Glatt Fluid Bed Dryer, model GPCG 30, stainless steel construction, with spray granulation insert, Wurster insert with spray system and Roto-granulator insert with drive, Proma Clim air handling unit, steam heat
Shugi Pilot Agglomeration Plant
We are pleased to offer: 1 Pilot Agglomeration System 1, Accurate Feeder 2, Schugi Flexomix 100 Schugi Mixer Type FXD-100 Continous Mixing-and Agglomerating Machine Order no. Client Bepex Po 13906 Order no. Hosokawa Mi
Glatt GPCG300 Fluid Bed Granulator
One used Glatt GPCG 300 Fluid Bed Granulators. Glatt Powder Coater Granulator. Gentle coating with versatility. From granulation /agglomeration processes to particle coating or palletizing. High operating reliability. PL
Vector Freund FL-M-1
Vector Freund FL-M-2
GEA Niro Model SD Micro Spray Dryer
One used GEA Niro SD MICRO spray dryer, stainless steel and glass construction, .3mm diameter glass drying chamber with stainless steel cone bottom, stainless steel cyclone collector, glass dust filter chamber with stain
Aeromatic STREA Fluid Bed Dryer
Aeromatic STREA Fluid Bed Dryer
Price:
  •  to 
<Prev | 171 | 172 | 173 | 174 | 175 | 176 | 177 | 178 | 179 | 180 | Next>