Machine Sales – Buy or Sell New and Used Machinery and Machine Tools at Machine Sales

Ingersoll Rand UP6-5 125 PSI TAS Rotary Screw Air Compressor

$RFQ

Reference #43912 Ingersoll Rand UP6-5 125 PSI TAS Rotary Screw Air Compressor FEATURES: Total Air System Air Dryer 80 Gallon Tank SPECIFICATION: PSI ................................... 125 PSI Tank Size ....

Motor: 5HP

Melville, NY
View Listing

Gleason Pfauter P60 CNC Gear Hobber

$RFQ

Reference #43884 Gleason Pfauter P60 CNC Gear Hobber FEATURES: Siemens Sinumeric 840D CNC CONTROLS Gantry Autoloader & Unloader Skiving Capability (Hard Re-Hobbing) Crowning, Lead Modification Full Enclos

Melville, NY
View Listing

Fixture Plate 54.5" x 125.5" x 1.5" Thick

$RFQ

Reference #43889 Fixture Plate 54.5" x 125.5" x 1.5" Thick SPECIFICATION: Length ................................ 125.5" Width ................................. 54.5" Thickness ...........

Width: 54.5"
Length: 125.5"

Melville, NY
View Listing

Toshiba Precision 70.75" x 144" x 4" T-Slotted Table

$RFQ

Reference #43739 Toshiba Precision 70.75" x 144" x 4" T-Slotted Table FEATURES: Toshiba Precision T-Slotted Table SPECIFICATION: Width ................................. 70.75" Length .......

Width: 70.75"
Length: 144"

Melville, NY
View Listing

2008 John Deere 8430 Tractor RTR#4101265-01

$63,500

Unit located in Phoenix, AZ. 2008 John Deere 8430 Tractor w/ Trimble NAV-900 GPS Receiver System, 6-Cylinder 2240 Diesel Engine, Power Shifting Transmission, Enclosed Cab, AC/Heater, AM/FM Radio, Power Steering, 4WD, Ho

Salem, OR
View Listing

2017 - 3000 Watt Amada ENSIS 3015-AJ CNC Fiber Laser

$RFQ

Resonator Wattage 3000 Watts Table Size 5' x 10' Max Sheet Size 60" x 120" Travels X Axis 121" Travels Y Axis 61" Travels Z Axis 3.93" Max Positioning Speeds 4,724"/ Min. Max

Wattage: 3000W
X axis travel: 10'

SANTA ANA, CA
View Listing

5.5" Wotan Rapid2 CNC Floor Type Horizontal Boring Mill

$RFQ

Reference #43827 5.5" Wotan Rapid2 CNC Floor Type Horizontal Boring Mill FEATURES: Siemens CNC Control 60-Position Automatic Tool Changer In-feeding Column SPECIFICATION: Spindle Diameter ............

Spindle diameter: 5.5"
X axis travel: 236.22"

Melville, NY
View Listing

Asquith MDB-300 5-Axis Gantry Type Machining Center

$RFQ

Reference #43915 Asquith MDB-300 5-Axis Gantry Type Machining Center FEATURES: Delta Dynapath CNC Control 400" x 160" T-Slotted Floor Plates Right Angle Head Attachment Coolant Thru Spindle SPECIF

Melville, NY
View Listing

Heat Brand Box Draw 40"W x 38"H x 60"L, 1300F

$RFQ

Box recirculating furnace with vertical rise door, ceramic fiber lining, 36"W x 36"H x 60"L rated work area, 3 HP cartridge fan, Honeywell DCP300 programmable temperature control, recorder, SCR solid state

Chamber width: 40"
Chamber length: 60"

SOUTH WINDSOR, CT
View Listing

#84 • APPROX 55 HP RODERMARK ELECTRIC MOTOR

$RFQ

LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#87 • LOT OF 2 FiFi TRANSFORMERS

$RFQ

480 VAC- 220 VAC, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#89 • LIQUID CONTROLS M-80-2 FUEL TRANSFER PUMP

$RFQ

FLOW RATE 80-800 GPM, DESIGNED FOR AVIATION FUEL, MAX PRESSURE 275 PSI, SN, 189 GALLONS SHOWING ON METER, WITH VEEDER ROOT TICKET PRINTER. LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PL

Livingston, LA
View Listing

#92 • EUREKA PUMP 250 X 350 OGF FOR FiFi SYSTEM

$RFQ

LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#93 • EUREKA PUMP 250 X 350 OGF FOR FiFi SYSTEM

$RFQ

LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#94 • ABB M2FA 400LKB 483 ELECTRIC MOTOR

$RFQ

LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#95 • ABB M2FA 400LKB 483 ELECTRIC MOTOR

$RFQ

LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#98 • JASON FIRE MONITOR DM200HD C01

$RFQ

LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#99 • JASON FIRE MONITOR DM200HD C01

$RFQ

LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#101 • FiFi SYSTEM COMPONENTS

$RFQ

2010 KUMERA NORGEAR TYPE FV1C-260-75F, SN N95329PORT, SCANPUMP TYPE SFP 250X350HD CCW, NO. 105994-1, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363

Livingston, LA
View Listing

#102 • FiFi SYSTEM COMPONENTS

$RFQ

NORGEAR TYPE FV1C-260-75F, SN N95329STB, SCANPUMP TYPE SFP 250X350HD CW, NO. 105993-1, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#107 • ENVIRO-PAK COMPACTOR

$RFQ

LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#106 • HYDRAULIC MARINE WINCH, UNKNOWN CAPACITY

$RFQ

LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#105 • HYDRAULIC MARINE WINCH, UNKNOWN CAPACITY

$RFQ

LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#104 • 2010 MARINE EQUIPMENT PTE HYDRAULIC WINCH

$RFQ

MODEL ME- HTGW- 10T, 10 TON CAPACITY, WINDING SPEED 15 M/ MIN, 12.6 HP, SN ME1008-07, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#103 • 2010 MARINE EQUIPMENT PTE HYDRAULIC WINCH

$RFQ

MODEL ME- HTGW- 10T, 10 TON CAPACITY, WINDING SPEED 15 M/ MIN, 12.6 HP, SN ME1008-08, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#120 • GENERAC CENTURION 3250 WATT GENERATOR

$RFQ

SN UNKNOWN, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#147 • RIDGID THREADER HEAD

$RFQ

LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#166 • INGERSOLL RAND 4000 LB AIR WINCH

$RFQ

SN AA5399-255, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#161 • 2005 EMCE MR30 FLG PNUEMATIC ELECTRIC CONTROLLED WINCH

$RFQ

WLL 150, KG, 37M/MIN, SN 1050164-1, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#162 • RAM WINCH PNEUMATIC WINCH

$RFQ

LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#163 • RAM WINCH PNEUMATIC WINCH

$RFQ

LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#164 • RAM WINCH KGUL-24MX1

$RFQ

MAX 18000 LBS, SN RAM080508, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#165 • 2006 INGERSOLL RAND MAN RIDER WINCH

$RFQ

MODEL NO. FA2i- MR24MK1GV, SN A004483, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#169 • SKID MOUNTED TRANSFER TANK

$RFQ

TANK DIMENSIONS APPROX 54” L X 36” W X 48” H, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#360 • AEROQUIP HOSE CRIMP MACHINE AND DRUM MOVER

$RFQ

LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#45 • TEREX MATERIAL HANDLER

$RFQ

6432 HOURS SHOWING, RUNS AND DRIVES, FUNCTIONAL MAGNET, SEE VIDEO, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#40 • 2010 MARINE EQUIPMENTS LARGE CAPACITY MARINE WINCH

$RFQ

MODEL ME-AHTW-DDWF-1201, WINDING CAPACITY 120/60/15 TON, 241 HP, SN ME101C-10, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#42 • JOHN DEERE 310 G BACKHOE LOADER

$RFQ

BACKHOE LOADER, RUNS AND DRIVES, SN T0310GX940660, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#133 • MILLER DIMENSION 652 DC WELDER

$RFQ

STOCK NO. 903379002, SN MB130139U, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#132 • MILLER DIMENSION 652 DC WELDER

$RFQ

STOCK NO. 903379002, SN MB130273U, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#144 • 2011 RHEEM 460V 3 PHASE AIR CONDITIONER

$RFQ

MODEL NO. RAWE-092DAZ, SN 8560F281206486. LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#130 • MILLER DIMENSION 652 WELDER

$RFQ

STOCK NO. 903379002, SN MC240015U, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#71 • ELECTRONICS CABINET FOR FiFi SYSTEM

$RFQ

LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#63 • MILLER DIMENSION 652 DC WELDER

$RFQ

SN MC240018U, STOCK NO. 903379002, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778 NOTE: Lots 63-70 are all Miller 652 DC Dimension Welders

Livingston, LA
View Listing

#47 • 2 TON SHIP CRANE

$RFQ

APPROX 258” BOOM LENGTH, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#48 • RESCUE BOAT

$RFQ

v

Livingston, LA
View Listing

#28 • CAT C18 MARINE GENSET

$RFQ

LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#37 • WELIN LAMBIE FRC LAUNCHING DAVIT CRANE

$RFQ

TYPE SARB10A, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#27 • CAT C18 MARINE GENSET

$RFQ

LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

CAT 3516 MARINE DIESEL ENGINE

$RFQ

ABS CERTIFIED. LESS THAN 20K HOURS. LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#20 • LOT OF 2 SIEMENS MASTER DRIVES

$RFQ

690V 1810A WATER COOLED VFD ABS CLASSED, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

#25 • CAT 3516 MARINE DIESEL ENGINE

$RFQ

ABS CERTIFIED, LESS THAN 20K HOURS. LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778

Livingston, LA
View Listing

AGIETRON HYPERSPARK 2 EX HS, Agievision Cont. MFG. 2006

$RFQ

WE APOLOGIZE THAT THE PHOTOS ARE NOT ROTATED CORRECTLY. I AM UNABLE TO MAKE THAT CHANGE. TABLE AREA: 17.72” x 23.62” TRAVELS: X-13.78” Y-9.84” Z-13.78” MAX WORKPIECE LENGTH: 25.59 MAX WORKPIECE WIDTH:

Hamel, MN
View Listing

CITIZEN MODEL L-20 SWISS TYPE CNC LATHE, CINCOM CONTROL, NEW 1999

$RFQ

WE APOLOGIZE THAT THE PHOTOS ARE NOT ROTATED CORRECTLY. I AM UNABLE TO MAKE THAT CHANGE. SPECIFICATIONS: Max. Machining Dia.: ¾” (.79) Max. Machining Length Per One Chuck: 7.87” Approx. Speed: 200

Spindle hole diameter: 0.79"

Hamel, MN
View Listing

CITIZEN MODEL L-20 SWISS TYPE CNC LATHE, CINCOM CONTROL, NEW 1998

$RFQ

WE APOLOGIZE THAT THE PHOTOS ARE NOT ROTATED CORRECTLY. I AM UNABLE TO MAKE THAT CHANGE. SPECIFICATIONS: Max. Machining Dia.: ¾” (.79) Max. Machining Length Per One Chuck: 7.87” Approx. Speed: 200

Spindle hole diameter: 0.79"

Hamel, MN
View Listing

HARDINGE MODEL HSL-59 SPEED LATHE

$RFQ

WE APOLOGIZE THAT THE PHOTOS ARE NOT ROTATED CORRECTLY. I AM UNABLE TO MAKE THAT CHANGE. SPECIFICATIONS: Swing Over Bed: 9” Length of Bed from Face of Spindle: 10” Spindle Capacity: Round 5C collets: 1-1

Swing: 9"
Centers: 10"

Hamel, MN
View Listing

DMS MODEL 3B4-5-12-10SCxxxx 3 AXIS GANTRY CNC ROUTER, FAGOR CONTROL, 2007

$RFQ

SPECIFICATIONS: TABLE AREA: 5’ X 12’ ATC: 7 SPINDLE TAPER: TH-HSK 40F/ER25 WITH: FAGOR CONTROL VOLTAGE 230V 3PH. 50 AMPS MISC. TOOL HOLDERS MACHINES SPECIFICATIONS SUBJECT TO VERIFICATION AND CHANG

Hamel, MN
View Listing

HEM 16" x 27" Automatic Mitering Horizontal Band Saw

$RFQ

HEM 16" x 27" Automatic Mitering Horizontal Band Saw Serial No: 661699, Stock No: 18346 Model: FP120HA Cutting Capacity @ 90°: 16″ x 27″ Blade Size: 1.25″ x 17′ x .042″ Electrical: 220/440V/3PH Motor

Width capacity: 16"
Height capacity: 27"

Nashville, TN
View Listing

SmipackHS700 Automatic Side Seal Shrink Wrapper RTR#4103698-01

$8,000

Equipment located in Raleigh, NC. 2019 Smipack HS700 Hi-Speed Fully Automatic Side Seal Shrink Wrapper, 3 Ph/ 220-240v/50-60 Hz; S/N: 68912 All equipment is sold “As Is, Where Is”. Reasonable offers will be considere

Salem, OR
View Listing

SCOTCHMAN SG3 3 in. Belt Grinder

$RFQ

CALL 386-304-3720 FOR AVAILABILITY FEATURES: *Industrial Parts Grinder with Built-In Dust Collection System for Efficient, Heavy-Duty Grinding. *The Scotchman SG3 is a 3" wide industrial belt grinder capable of

Belt width: 3"

Port Orange, FL
View Listing

12ga x 10' CNC Folding Machine

$75,000

STANDART SPECIFICATIONS AND ACCESSORIES • AC motorized drive of folding (Y, Z axis) • Servo motorized back gauge (X axe) • Eccentric Arm system with AC motor drive on clamping axe and direct AC drive on folding axe

Maximum thickness capacity: 12Ga
Bending length: 126"

Port Orange, FL
View Listing

3" Capacity CNC Tube/Pipe Bending Machine

$195,000

Technical Specifications: • Max. Tube Capacity: o Steel: 38mm x 2mm o Stainless Steel: 38mm x 1.5mm • Min. Tube Diameter: 8mm • Max. Steel Profile Capacity: 35mm x 35mm x 2mm • Max. Bending Angle: 190° • Bend

Maximum diameter: 3"

Port Orange, FL
View Listing

8x8x3/4 Gator Angle Shearing Punching Line

$325,000

SPECIFICATIONS Standard Min. Angle Size 2.20 x 2.20 x .157 in Max. Angle Size 8” x 8” x ¾” in Max. length of Finished Angle 40’ Punches per Side 3 Max. Punch 1” Max. Punch Tonnage 160 Max. Shear Tonnage (3

Port Orange, FL
View Listing

#16 - 2" G-Bar Rebar Bender

$9,900

Strength of Steel Piece BS 36 BS 45 BS 50 BS 60 45 kg/mm2 1 Ø 36mm Ø 45mm Ø 50mm Ø 60mm 2 Ø 20mm Ø 30mm Ø 32mm Ø 38mm 65 kg/mm2 1 Ø 32mm Ø 40mm Ø 45mm Ø 50m

Port Orange, FL
View Listing

3-in-1 Laser Welding Machine 3kw

$24,900

Fiber Laser Welding Machine Model LCW1500/2000/3000 Power(optional) 1500W, 2000W, 3000W Type Fiber Laser Welding & Cleaning & Cutting 3 in 1 Machine Machine Model LCW Series Laser Welding & Cleaning Cut

Power: 3KVA

Port Orange, FL
View Listing

CNC Variable Rake Hydraulic Guillotine Shear, 10' x 1/4", new

$65,000

STANDARD EQUIPMENT AND FEATURES Elgo P40T Touch Screen Colour Control Unit Automatically adjusted blade gap by CNC Automatically adjusted cutting length by CNC Automatically adjusted rake angle by CNC Back

Port Orange, FL
View Listing

13"x18" Semi Automatic Pivot Type Bandsaw 5hp

$22,000

CUTTING CAPACITY 0°: 6” +45°: 11” Main Drive Motor: 2.0 HP Hydraulic Motor: 5 HP Coolant Pump: 2 HP Cutting Speeds: 6 - 393.7 ft/min Band Dimensions: 1 x 1.1 x 0.035 in Working Height: 2” Weight: 1,4

Port Orange, FL
View Listing

Gator Combo 10'x40' Plate Processing Machine XPR300

$395,000

• Net Cutting Area: 10ft x 40ft • CNC Controller: ESA (Italy) • Power Source: Hypertherm XPR 300 with Core Gas Console (USA) • Nesting Software: Hypertherm ProNest (USA) including TrueHole™ technology • Drilling Modu

Port Orange, FL
View Listing

3" x 3" Angle Roll with Hydraulic Guide Rolls and NC Controller

$32,000

NEW 3-roll double pinch hydraulic angle roll, 3 x 3 capacity incl. NC controller, Hydraulic Guide Rolls, 3-YEAR WARRANTY, FOB Customer NC Controller + Hydraulic Guide Rolls • 7” Multi-Functional Touch Screen: Easy

Port Orange, FL
View Listing

10' x 1/2" 4-roll Hydraulic Plate Roll w NC Control

$96,000

NEW 4-roll double pinch hydraulic plate roll, 10' x 1/2" capacity incl. NC controller, 3-YEAR WARRANTY, FOB Customer NC-controller + - 10" Multi-Functional Touch Screen: Intuitive interface for easy o

Roll length: 122"
Thickness: 0.5"

Port Orange, FL
View Listing

12' x 250 TON Hydraulic CNC Press Brake

$119,000

STANDARD EQUIPMENT AND FEATURES 4-Axis: Y1, Y2, X, R Control Unit: Delem DA-58T Controller Back Gauge: X Axis with AC Motor Bottom Narrow Table Support Arm: Includes scale, T-Slot, and tilting stop. Top Tool Clampi

Tonnage: 250T

Port Orange, FL
View Listing

6kw, 5x10 Enclosed, Shuttle Laser Table - NEW

$195,000

NEW 5x10 6kw laser table Delivery, installation and training included! 2 years full warranty (parts and on-site service) Technical Parameters Max Working Area 5ft x 10ft X-axis Stroke 5ft Y-axis Strok

Wattage: 6000W

Port Orange, FL
View Listing

2004 STAR SB-16 SWISS TYPE SCREW MACHINE

$24,500

FANUC 18iTB, 10,000 RPM, 3 HP, C-AXIS, LNS HYDROBAR EXPRESS 220 BAR FEED, TRI-MIST MIST COLLECTOR,

Thousand Oaks, CA
View Listing

Messer MetalMaster MMXCEL6 6' x 15' Plasma Cutting System with Shut

$RFQ

Reference #43897 Messer MetalMaster MMXCEL6 6' x 15' Plasma Cutting System with Shuttle System FEATURES: Global CNC Control (2) Hypertherm HPR400XD Tru-Hole Plasma Unit (2) Plasma Torch Stations Slagger

Melville, NY
View Listing

#121 • JET JVM-942 VERTICAL MILL

$RFQ

SN 8005299, LOCATED AT 1140 PETERS RD. HARVEY, LA 70058. CONTACT GUY JONES FOR MORE INFO AT 985-789-4389.

Livingston, LA
View Listing

2023 Ark (Komplet) K-JC704 Mobile Jaw Crusher RTR# 4103122-01

$155,000

Unit located in Maiden, NC. 2023 Ark (Komplet) K-JC704 Jaw Crusher, Doosan T4 Diesel Engine, Hyd Transmission, Belt, Controls, Adjustable Jaw, Hour Meter Reads: 190 (Unverified), S/N: 523976 All equipment is sold “As I

Salem, OR
View Listing

98" x 276" x 11" T-Slotted Floor Plate

$RFQ

Reference #43832 98" x 276" x 11" T-Slotted Floor Plate FEATURES: Cast Iron Construction T-Slotted CAPACITY: Width ................................. 98.42" Length ..........................

Width: 98"
Length: 276"

Melville, NY
View Listing

Doosan BM-2740M CNC Bridge Type Vertical Machining Center

$RFQ

Reference #43887 Doosan BM-2740M CNC Bridge Type Vertical Machining Center FEATURES: Fanuc 31iB CNC Control 60-Station Automatic Tool Changer Thru Spindle Coolant SPECIFICATIONS: X-Axis Travel ................

Melville, NY
View Listing

2008 - 4000 Watt Amada LC3015F1NT CNC CO2 Laser

$RFQ

Wattage 4000 Watts Max Sheet Size 5' x 10' Max Material Weight 2000 lbs. Max Material Thickness Carbon Steel: 1.25", SS: 0.750", Aluminum: 0.500" X Axis Travel 121" Y Axis Travel 61"

Wattage: 4000W
X axis travel: 5'

SANTA ANA, CA
View Listing

Miter Saw 12" Cmpd Sld DB DW

$599

Miter Saw 12" Cmpd Sld DB DW Model: DW708 [DeWalt/Ridgid] S/N: 15331 12" Dual Compound Sliding Miter Saw w/Mobile Stand 15Amp; 1Ph; 120Volt

Mesa, AZ
View Listing

12" x 14" Cosen C-300NC Automatic Horizontal Bandsaw, Taian PLC,

$RFQ

12" x 14" COSEN AUTOMATIC SCISSOR TYPE HORIZONTAL BAND SAW Model C-300NC, S/N C9913748, New 2010 Stock # Q11938 EQUIPPED WITH: Taian PLC Control, Fully Automatic Band Saw with Hydraulically Controlled Vis

Width capacity: 14"
Height capacity: 12"

Cincinnati, OH
View Listing

Hardinge Elite 51 MS CNC Lathe

$RFQ

Hardinge Elite 51 MS CNC Lathe Year of Mfg: 2009 Hours as of 12-2024: Power On: 31,066 Operating 2,942 Cutting: 9,343 Control Type: Fanuc 18i-TB Swing: 18" Turning Diameter: 11.1" Center Dis

Swing: 18"
Centers: 16"

Troy, MI
View Listing

9" x 18" W.F. Wells Semi-Automatic Horizontal Bandsaw, Double Col

$RFQ

9" x 18" WF WELLS SEMI AUTOMATIC HORIZONTAL BAND SAW Model W-9-1, S/N W6034, New 1997 Stock # Q11959 EQUIPPED WITH: Semi-Automatic Sawing Features with Control, Controlled Blade Speed, Blade Powered Clean

Cincinnati, OH
View Listing

15" x 54" Leblond Makino Regal Servo-Shift Engine Lathe, Model 14

$RFQ

15" x 54" LEBLOND REGAL SERVO-SHIFT ENGINE LATHE Model 14C, S/N 14C 1007, New 1984 Stock # Q11994 EQUIPPED WITH: Hard and Ground Steel Bed Ways, Inch/Metric Threading, Thread Chasing Dial, 10" 3-Jaw

Swing: 15.5"
Centers: 54"

Cincinnati, OH
View Listing

Hardinge Bridgeport VMC1000p3 CNC Vert Machining Cntr, 44" x20" t

$RFQ

HARDINGE BRIDGEPORT VMC1000P3 CNC VERTICAL MACHINING CENTER Model VMC1000p3, S/N E05410583, New 2006 Stock # Q11951 EQUIPPED WITH: Fanuc Series 0i-MC CNC Control, RS-232 Port, 8000 RPM Spindle, Through Spindle Cool

X axis: 40.2"
Y axis: 20"

Cincinnati, OH
View Listing

New Century 120" CNC Vertical Boring Mill

$RFQ

Reference #43800 New Century 120" CNC Vertical Boring Mill FEATURES: Fanuc 18i-TB CNC Control 12-Position ATC Coolant Thru-Tool SPECIFICATIONS: Table Diameter ........................ 120" Maximum S

Swing: 124"

Melville, NY
View Listing

New Century 120" CNC Vertical Boring Mill

$RFQ

Reference #43801 New Century 120" CNC Vertical Boring Mill FEATURES: Fanuc 18i-TB CNC Control 12-Position ATC Coolant Thru-Tool SPECIFICATIONS: Table Diameter ........................ 120" Maximum S

Swing: 124"

Melville, NY
View Listing

Mitsubishi MV1200S CNC Wire EDM

$RFQ

Reference #43702 Mitsubishi MV1200S CNC Wire EDM FEATURES: D-Cubes CNC Control Hand Pendant Control Mitsubishi HE-SV50-W34 Unit Cooler Integral Dielectric Unit & Chiller Power Supply Cabinet CAPACITIES:

X axis travel: 15.7"
Y axis travel: 11.8"

Melville, NY
View Listing

96" x 48" x 9.8" T-Slotted Floor Plate

$RFQ

Reference #43845 96" x 48" x 9.8" T-Slotted Floor Plate FEATURES: 9 T-Slots Widthwise 5 T-Slots Lengthwise Anchors SPECIFICATION: Length ................................ 96" Width .......

Width: 96"
Length: 48"

Melville, NY
View Listing

86" x 314" Karats LR-15N Heavy Duty CNC Lathe

$RFQ

Reference #43819 86" x 314" Karats LR-15N Heavy Duty CNC Lathe FEATURES: Fanuc 31i-B CNC Control Lamellar Type Tool Post 55" 4-Jaw Chuck 77,000 Lb Weight Capacity 4-Way Bed Design (Carriage ca

Swing: 86.61"
Centers: 314.96"

Melville, NY
View Listing

86" x 314" Karats LR-15N Heavy Duty CNC Lathe

$RFQ

Reference #43819 86" x 314" Karats LR-15N Heavy Duty CNC Lathe FEATURES: Fanuc 31i-B CNC Control Lamellar Type Tool Post 55" 4-Jaw Chuck 77,000 Lb Weight Capacity 4-Way Bed Design (Carriage ca

Swing: 86.61"
Centers: 314.96"

Melville, NY
View Listing

Muratec MW200 Twin Spindle CNC Turning Center

$RFQ

Reference #43849 Muratec MW200 Twin Spindle CNC Turning Center FEATURES: Fanuc CNC Control (2)Spindles (2)10 Station Turrets CAPACITY: Maximum Swing .......................... 17.32" Maximum Turning Diam

Swing: 17.32"

Melville, NY
View Listing

Poreba TCG-200 x 12M Heavy Duty Conventional Lathe

$RFQ

Reference #43836 Poreba TCG-200 x 12M Heavy Duty Conventional Lathe FEATURES: 100 HP Main Motor Inch/Metric Threading 66,000 Lbs Unsupported Weight Capacity CAPACITY: Maximum Swing Over Bedways ............ 7

Swing: 78.74"
Centers: 472.44"

Melville, NY
View Listing

Cab Saw 10x52 3/1 LT Saw Stp

$5,799

Cab Saw 10x52 3/1 LT Saw Stp Model: ICS31230/05200 [Saw Stop/JessEm] S/N; I143001506 10" Left Tilt Cabinet Saw w/52" Fence; Router, Router Lift, Inserts, Table, Mobile Base; Brakes; Feather Boards 3Hp; 1Ph;

Mesa, AZ
View Listing

36" x 314" Binns & Berry CNC Flatbed Lathe

$RFQ

Reference #43853 36" x 314" Binns & Berry CNC Flatbed Lathe FEATURES: Fanuc 0iTC CNC Control 3-Way Bed Design, Carriage can Pass Tailstock 27" 4-Jaw Chuck 4-Position Auto-Indexing Turret

Melville, NY
View Listing

Kurt PT800A Vise

$RFQ

Reference #43854 Kurt PT800A Vise MANUFACTURER'S SPECIFICATION: Jaw Width ............................. 8" Jaw Depth ............................. 2" Jaw Opening ........................... 7.375&qu

Melville, NY
View Listing

2007 Fadal 6030 CNC Machining Center with Fanuc 18i Control, Thru Spindle C

$RFQ

2007 Fadal 6030 CNC Machining Center with Fanuc 18i Control, Thru Spindle Coolant and Chip Conveyor. Fadal 6030HT Vertical Machining Center Control: Fanuc 18i-MB5 62.5" x 30" Table Size 60" X - Tra

Livonia, MI
View Listing

2020 Bobcat E35I Excavator w/Bucket RTR#4103293-01

$32,500

Equipment located in Cairo, GA. 2020 Bobcat E35I Crawler Mounted Compact Excavator w/ Bucket, T4 Diesel Engine, Hyd Transmission, Enclosed Cab, A/C, Heater, AM/FM Radio, Hyd Thumb, Hour Meter Reads: 755 (Unverified), S/

Salem, OR
View Listing

2022 Ironwood SL200 Sliding Table Saw RTR#4083814-01

$8,500

Equipment located in O’Fallon, MO. 2022 Ironwood SL200 Sliding Table Saw S/N: 111C05045 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be inspected by appointment only. Please

Salem, OR
View Listing

Sonoruka 4,400 Lb. Servo Feed Line

$RFQ

Sonoruka 4,400 Lb. Servo Feed Line S/N: 3748, Mfg: 1991, Stock No: 18357 Model: UCW 1225 Uncoiler DLFW 3225 Servo Feed W/Leveler Capacity: 4,400 Lbs. x 9.84" (Per Side) Coil Width: 1.18" - 9.84&

Nashville, TN
View Listing

buy & sell, new & used machinery, machine tools & equipment

Machines currently for sale: