buy & sell, new & used machinery, machine tools & equipment

<Prev | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | Next>
Refine: Viewing 1301 - 1350 of 20770 matches
Sort by:
Items Per Page:  20 |  50  |  100
POLLUTION CONTROL VPI 52 BURN OFF OVEN 42"W 48"L 44"H
$RFQ
POLLUTION CONTROL VPI 52 BURN OFF OVEN 42"W 48"L 44"H
DIGITAL CONTROLS SINGLE SIDE SWING DOOR WITH POSITIVE LATCHING AND PRESSURE RELIEF ROOF PANEL. INTERIOR DOORS, WALLS AND ROOF ARE LINED WITH LIGHT WEIGHT FIBER REFRACTORY. FLOOR IS A POURED CASTABLE REFRACTORY. HEAT (35
KOIKE-ARONSON PLASMA ARC CUTTING SYSTEM WITH TABLE 10'CAPACITY
$RFQ
KOIKE-ARONSON PLASMA ARC CUTTING SYSTEM WITH TABLE 10'CAPACITY
NEW 2004 CAPACITY 3100MM (122") ORDER # S0178105 HYPERTHERM HYSPEED HT2000 POWER SUPPLY
GASBARRE 2150 F ELECTRIC ATMOSPHERE BOX FURNACE 28"W 48"L 28"
$RFQ
GASBARRE 2150 F ELECTRIC ATMOSPHERE BOX FURNACE 28"W 48"L 28"
DIGITAL CONTROLS ELECTRICALLY HEATED ATMOSPHERE (HYDROGEN & NITROGEN) RETORT BOX FURNACE WITH SIDE SWING DOOR (WATER COOLED DOOR FLANGE). INTERIOR HAS AN ALLOY RETO
  • Chamber width: 28"
  • Chamber length: 48"
    ABBOTT 2100 F ATMOSPHERE 12"WIDE BELT FURNACE
    $RFQ
    ABBOTT 2100 F ATMOSPHERE 12"WIDE BELT FURNACE
    DIGITAL CONTROLS 12"WIDE ATMOSPHERE BELT FURNACE WITH ALLOY RETORT CURRENTLY USING A 10"WIDE BELT. PARTS ARE LOADED ON THE VARIABLE SPEED MESH BELT AT 6'LONG ENTRANCE TABLE, PASS THROUGH 3' ENTRANCE P
    • Chamber width: 12"
    • Chamber length: 216"
      STEELMAN GAS FIRED BURN OFF OVEN 6'W 3'L 3'H
      $RFQ
      STEELMAN GAS FIRED BURN OFF OVEN 6'W 3'L 3'H
      DIGITAL CONTROLS DOUBLE DOOR OPENING WITH POSITIVE LATCHING. PRIMARY HEAT CHAMBER AND AFTER BURNER CHAMBER ARE MOUNTED ON REAR WALL WITH HEAT (351,000 BTU/HR MAX. TOTAL) SUPPLIED BY TWO PACKAGE BURNERS. HEAT FLOW IS &q
      LUCIFER 1450 F TWO CHAMBER ELECTRIC FURNACE
      $RFQ
      LUCIFER 1450 F TWO CHAMBER ELECTRIC FURNACE
      DIGITAL CONTROLS (2) CHAMBER BOX FURNACE WITH SIDE SWING DOORS AND REAR MOUNTED AIR CIRCULATING FANS. THE TOP CHAMBER IS 18"LONG . BOTTOM CHAMBER IS 48"L
      • Chamber width: 18"
      • Chamber length: 48"
        Giddings & Lewis VTC-1600 63" CNC Vertical Boring Mill
        $RFQ
        Giddings & Lewis VTC-1600 63" CNC Vertical Boring Mill
        Reference #43312 Giddings & Lewis VTC-1600 63" CNC Vertical Boring Mill FEATURES: Fanuc 160i-TB CNC Control 26-Station Automatic Tool Change 6-Wedge Lock & 20 Kennametal KM80 Station Misc. Tooling
        • Swing: 78.74"
          Makino A-92 CNC Horizontal Machining Center
          $RFQ
          Makino A-92 CNC Horizontal Machining Center
          Reference #43243 Makino A-92 CNC Horizontal Machining Center Features: Makino Pro 5 (Fanuc) Control Full B-Axis Contouring (2) 39” x 32” Pallet Size Specification: X-Axis ................................ 59
          • X axis: 59.8"
          • Y axis: 49.2"
            (2) 90.875" x 25.75" T-Slotted Angle Plates / Machining Tables w/
            $RFQ
            (2) 90.875" x 25.75" T-Slotted Angle Plates / Machining Tables w/
            Reference #43181 (2) 90.875" x 25.75" T-Slotted Angle Plates / Machining Tables w/ Fixture Surface Plates FEATURES: Drilled and Tapped Surface Fixture Plates T-Slots Cast Iron Construction SPECIFIC
            Blanchard 22D-42 42" Vertical Spindle Rotary Surface Grinder
            $RFQ
            Blanchard 22D-42 42" Vertical Spindle Rotary Surface Grinder
            Reference #43174 Blanchard 22D-42 42" Vertical Spindle Rotary Surface Grinder FEATURES: 42" Magnetic Chuck Neutrofier II Magnetic Chuck Control 48" Swing Inside Guards 50 HP Main Motor CAPACITIE
            • Chuck: 42"
              Giddings & Lewis 96" x 120" Hydrostatic Rotary Index Table
              $RFQ
              Giddings & Lewis 96" x 120" Hydrostatic Rotary Index Table
              Reference #27645 Giddings & Lewis 96" x 120" Hydrostatic Rotary Index Table FEATURES: 75,000 lb Load Capacity 4-Positive Shot Pin Locations SPECIFICATIONS: Spindle Size ..........................
              • Diameter or width: 96"
              • Length: 120"
                Giddings & Lewis 360P 72" x 96" CNC Rotary Table
                $RFQ
                Giddings & Lewis 360P 72" x 96" CNC Rotary Table
                Reference #23421 Giddings & Lewis 360P 72" x 96" CNC Rotary Table FEATURES: 360 Degree Scale With 1/2 Degree Increments Hydraulic Clamping SPECIFICATIONS: Table Size ............................
                • Diameter or width: 72"
                • Length: 96"
                  Giddings & Lewis 360P 72" x 72" CNC Rotary Table & CNC In
                  $RFQ
                  Giddings & Lewis 360P 72" x 72" CNC Rotary Table & CNC In
                  Reference #19686 Giddings & Lewis 360P 72" x 72" CNC Rotary Table & CNC Infeeding Slide ROTARY TABLE: Table Size ............................. 72" x 72" B-Axis Rotation .................
                  • Diameter or width: 72"
                  • Length: 72"
                    AZ Spa CG500/3 39" x 200" CNC Crankshaft Grinder
                    $79,500
                    AZ Spa CG500/3 39" x 200" CNC Crankshaft Grinder
                    Reference #32038 AZ Spa CG500/3 39" x 200" CNC Crankshaft Grinder FEATURES: Siemens 840D CNC Controls Marposs P7 Gauging Marposs Shape Control Heidenhain Scales Wheel Balancing System Steady Rest
                    • Crankshaft swing: 39.37"
                      Mori Seiki Model MH-1003 CNC Horizontal Machining Center
                      $RFQ
                      Mori Seiki Model MH-1003 CNC Horizontal Machining Center
                      SPECIFICATIONS: Pallet Size 39.4” x 39.4” X-axis 80.3” Y-axis 51” Z-axis 47.2” Table Indexing 1° Maximum Table Load 6,600 lbs. Distance from Spindle Center to Table Top 1.97”-53.17” Distance from Spindle Nos
                      2016 Bobcat E20 Compact Excavator w/ 20' Bucket RTR#4103506-01
                      $7,000
                      2016 Bobcat E20 Compact Excavator w/ 20' Bucket RTR#4103506-01
                      Equipment located in Thonotosassa, FL. 2016 Bobcat E20 Compact Excavator w/ 20' Bucket, T4 Diesel Engine, Hyd Transmission, Open Cab, Blade, Hour Meter Reads: 2,351 (Unverified), S/N: B3BL12791 All equipment is sol
                      FADAL VMC 15 VERTICAL MACHINING CENTER 1994
                      $RFQ
                      FADAL VMC 15 VERTICAL MACHINING CENTER 1994
                      FADAL VMC 15 VERTICAL MACHINING CENTER 1994 Serial # 9404163 MODEL........................: 914-15 TRAVELS: X............................: 20" Y............................: 16" Z.....................
                      Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999
                      $RFQ
                      Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999
                      Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999 S/N 9910278 Fadal CNC 88 HS CNC Controller, 21-Automatic Tool Changer, CAT40 Taper, Work Light Table Size: 38″x16″ Travels: X Axis 30″ Y Axis
                      Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999
                      $RFQ
                      Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999
                      Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999 S/N 9910278 Fadal CNC 88 HS CNC Controller, 21-Automatic Tool Changer, CAT40 Taper, Work Light Table Size: 38″x16″ Travels: X Axis 30″ Y Axis
                      3/4" X 30" Eldorado Mega Model M-75-1041 Precision Deep Hole Gun
                      $RFQ
                      3/4" X 30" Eldorado Mega Model M-75-1041 Precision Deep Hole Gun
                      SPECIFICATIONS: Drilling Diameter Maximum .75” Drilling Diameter Minimum .055” Maximum Drilling Depth 30” Spindle Speeds 725-5860 RPM Drilling Feed Rate .1-99.9 IPM Rapid Feed Rate 200 IPM Work Table 22” x 26” H
                      Johnford SV-40 CNC Vert Machining Cntr, 47" x20" tbl, XYZ=41/20/2
                      $RFQ
                      Johnford SV-40 CNC Vert Machining Cntr, 47" x20" tbl, XYZ=41/20/2
                      JOHNFORD SV-40 CNC VERTICAL MACHINING CENTER Model SV-40, S/N MLB130534, New 2013 Stock # Q11996 EQUIPPED WITH: Fanuc 0i CNC Control, 10000 RPM Cat 40 Spindle, 24 ATC, Spindle Chiller, Chip Pan. SPECIFICATIONS:
                      • X axis: 41"
                      • Y axis: 20"
                        MECOF CS-88 Universal Boring & Milling Machine
                        $RFQ
                        MECOF CS-88 Universal Boring & Milling Machine
                        Reference #31589 MECOF CS-88 Universal Boring & Milling Machine CAPACITY: Head Vertical Travel, Y-Axis ......... 70" Table Travel, X-Axis ................. 169" Ram Travel, Z-Axis ...................
                        • Spindle diameter: 5"
                        • X axis travel: 169"
                          Est. 2019 Hitachi ZAXIS 250LC-6 Excavator RTR#5013076-01
                          $70,000
                          Est. 2019 Hitachi ZAXIS 250LC-6 Excavator RTR#5013076-01
                          Unit located in Harriman, TN. Est. 2019 Hitachi ZAXIS 250LC-6 Excavator w/ Bucket, Isuzu 4HK1 Diesel Engine, Hyd Transmission, Enclosed Cab, A/C, Heater, Air Ride Seat, AM/FM Radio, Hyd Thumb, Hour Meter Reads: 2,327 (
                          4' x 12" Ooya RE-1225H Radial Drill, 1985 RPM, #5 MT, 75" x30
                          $RFQ
                          4' x 12" Ooya RE-1225H Radial Drill, 1985 RPM, #5 MT, 75" x30
                          4' x 12" OOYA RADIAL ARM DRILL Model RE-1225H, S/N OA8-21000, New 1979 Stock # Q12015 EQUIPPED WITH: Hardened Arm Ways, Tapping Capabilities, Power Elevation, Power Clamping, Coolant System (Built-In).
                          • Arm length: 4.083'
                          • Column diameter: 12.625"
                            8' x 1/2" Bertsch 3-Roll Plate Bending Roll w/Air Drop End, Initia
                            $RFQ
                            8' x 1/2" Bertsch 3-Roll Plate Bending Roll w/Air Drop End, Initia
                            8' x 1/2" BERTSCH 3-ROLL INITIAL PINCH PLATE BENDING ROLL Model #9, S/N M-9980, New 1971 Stock # Q12014 EQUIPPED WITH: 3-Roll Hydraulic Initial Pinch Design, Air Drop End, Power Bottom-Roll Adjustment, Dia
                            • Roll length: 99"
                            • Thickness: 0.406"
                              HAAS HL-2BB CNC LATHE
                              $5,950
                              HAAS HL-2BB CNC LATHE
                              BIG BORE, PARTS CATCHER, CHIP CONVEYOR, 3400 RPM, 15 HP, 10"CHUCK
                              • Swing: 20"
                              • Centers: 20"
                                Thermo Scientific Heratherm IMH180 Benchtop Incubator, 6.3 CU FT Capacity
                                $RFQ
                                Thermo Scientific Heratherm IMH180 Benchtop Incubator, 6.3 CU FT Capacity
                                THERMO FISHER SCIENTIFIC BENCHTOP INCUBATOR Model Heratherm IMH180, New 2015 Stock # Q11725, Q11726 (2) Incubators Available FEATURES: Advanced Protocol Microbiological Incubator Capacity 6.3 cu ft (178L) Dual
                                CHEVALIER FSG-3A818 SURFACE GRINDER
                                $8,950
                                CHEVALIER FSG-3A818 SURFACE GRINDER
                                2 HP, 8" GRINDING WHEEL
                                • Table width: 8"
                                • Table length: 18"
                                  16-36 Barber Colman Universal Gear Hobber
                                  $RFQ
                                  16-36 Barber Colman Universal Gear Hobber
                                  SPECIFICATIONS: Maximum Rated Diameter Pitch (Nominal) 6DP (4.2 Module) Maximum Rated Work Diameter 16” Maximum Hob Diameter 5” Maximum Hob Slide Travel 36” Maximum Work Slide Travel 8” Main Drive Motor 5HP Approx
                                  No. 16-36 Barber-Colman Universal Gear Hobber
                                  $RFQ
                                  No. 16-36 Barber-Colman Universal Gear Hobber
                                  SPECIFICATIONS: Capacity in Steel, 1 Cut 6 DP (4.2 Mod) Rated Work Diameter Max 16” Travel of Hob Carriage Max 36.5” Distance Work Spindle Face to Tail Center Max 64” Work Spindle to C/L of Hob Spindle Max 39.5” Wo
                                  2015 John Deere 824K Wheel Loader w/ Bucket RTR#4083381-01
                                  $48,000
                                  2015 John Deere 824K Wheel Loader w/ Bucket RTR#4083381-01
                                  Unit located in Stoney Creek, VA. 2015 John Deere 824K Wheel Loader w/Bucket, PowerTech PSX 6135 Diesel Engine, Powershift Transmission, Enclosed Cab, Power Steering, Brakes, Air Ride Seat, A/C, Heater, Hour Meter Reads
                                  Haas VF-2SS Machining Center
                                  $51,500
                                  Haas VF-2SS Machining Center
                                  Table: 14" x 36" Spindle: CAT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 24 RPM: 12,000RPM Controller: Haas Year: 2017 4th axis: Ready 5th axis: Available
                                  Fadal VMC15 Machining Center
                                  $19,000
                                  Fadal VMC15 Machining Center
                                  Table: 16" x 39" Spindle: BT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 21 RPM: 7,500RPM Controller: Fadal Year: 2006 Voltage / Phase: 220 / 3 Weight: 11,0
                                  428020515002
                                  $399
                                  428020515002
                                  428-02-051-5002 worm drive gear, new, custom made for Rockwell 18" Planer
                                  2017 Intermac Master 38.8 CNC Stone Router RTR#4103177-01
                                  $12,000
                                  2017 Intermac Master 38.8 CNC Stone Router RTR#4103177-01
                                  Equipment located in Raleigh, NC. 2017 Intermac Master 38.8 CNC Stone Router, S/N: 1000016281, With Z-Laser LP-HFD2, S/N: 1700008926 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. C
                                  2018 Bradbury Sheet Slitter
                                  $8,000
                                  2018 Bradbury Sheet Slitter
                                  Lightly used, 2018 Stand Alone Slitter 4.0" diameter hardened & precision ground arbors 42" Passline Maximum Sheet Width 48.50" / Minimum 4.0" Maximum material thickness .048" (18 gauge)
                                  Legacy Mill 8'
                                  $750
                                  Legacy Mill 8'
                                  Legacy Mill 8' Model: 1500 EX [LegacyWoodworking Machinery] S/N: N/A
                                  8' x 3/8" Americor Double Pinch Plate Bending Roll
                                  $RFQ
                                  8' x 3/8" Americor Double Pinch Plate Bending Roll
                                  . We are pleased to offer for your consideration: (1) 3/8" x 8' Americor Double Pinch Plate Bending Roll Stock Number: 13985 List Price: On Request Manufacturer: Americor Model Number: 4RDP 250/8 S
                                  • Roll length: 100"
                                  • Thickness: 0.375"
                                    Fadal VMC15XT Machining Center
                                    $19,500
                                    Fadal VMC15XT Machining Center
                                    Table: 16" x 39" Spindle: BT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 21 RPM: 7,500RPM Controller: Fadal Year: 2006 Voltage / Phase: 220 / 3 Weight: 11,0
                                    SNK PRODIGY MODEL GT-27 CNC GANG TOOL LATHE, MFG. 2006
                                    $RFQ
                                    SNK PRODIGY MODEL GT-27 CNC GANG TOOL LATHE, MFG. 2006
                                    WE APOLOGIZE THAT THE PHOTOS ARE NOT ROTATED CORRECTLY. I AM UNABLE TO MAKE THAT CHANGE. Spindle RPM – Variable: 100 to 6,000 RPM Spindle Bore: 1.0625″ (27mm) Bar Size – Maximum: 1.0625″ (27mm) Tool Blo
                                    • Swing: 0"
                                    • Centers: 0"
                                      National 5/16" Cold Header
                                      $12,500
                                      National 5/16" Cold Header
                                      National 5/16" High Speed Cold Header, DSSD Capacity: 5/16" x 1-1/2" ***Complete inspection report. Has not been used for production since inspection. Specifications: Maximum Cutoff Diameter: 5/16
                                      • Maximum workpiece diameter: 0.312"
                                      • Maximum workpiece length: 1.5"
                                        HNK NT-14/16FD CNC Vertical Lathe
                                        $RFQ
                                        HNK NT-14/16FD CNC Vertical Lathe
                                        Reference #43872 HNK NT-14/16FD CNC Vertical Lathe FEATURES: Fanuc 18T CNC Control (2) Vertical Rams (2) 12 Position Automatic Tool Changer Full Chip & Coolant Guards, Chip Conveyor Specifications:
                                        • Swing: 62.99"
                                          HNK VTB-12/16 47"/63" CNC Vertical Boring Mill
                                          $RFQ
                                          HNK VTB-12/16 47"/63" CNC Vertical Boring Mill
                                          Reference #43871 HNK VTB-12/16 47"/63" CNC Vertical Boring Mill FEATURES: Fanuc 18T CNC Control Vertical Ram 12 Position Automatic Tool Changer Full Chip & Coolant Guards, Chip Conveyor Spec
                                          • Swing: 62.99"
                                            MORI SEIKI ZL150S Duel Turret/Sub-spindle Cnc Lathe 2002
                                            $RFQ
                                            MORI SEIKI ZL150S Duel Turret/Sub-spindle Cnc Lathe 2002
                                            MORI SEIKI ZL150S Duel Turret/Sub-spindle Cnc Lathe 2002 S/N ZL150BE0266 SPECIFICATIONS Bar Capacity 1.77" Swing 26.77" Turning Diameter 17.32" Spindle Speed 5,000 RPM Co
                                            BACE Model V63HD Vertical Baler
                                            $RFQ
                                            BACE Model V63HD Vertical Baler
                                            SPECIFICATIONS: Nominal Bale Size 60” x 30” x 48” Height Bale Weight Up to 1,100 lbs. Bale Volume 50 cu. ft. No. of Bale Tie Slots 5 Loading Height 54 – ½” Ejector System Semi-Automatic Hydraulic Motor 15 HP
                                            Doral 6048 6-Wheel Structural Plate Shot Blast System
                                            $RFQ
                                            Doral 6048 6-Wheel Structural Plate Shot Blast System
                                            Reference #43956 Doral 6048 6-Wheel Structural Plate Shot Blast System FEATURES: Less than 100 Hours Blasting Hours! MAXIMUM WORK: Maximum Plate Width ................... 62" Maximum I-Beam ...............
                                            ERBEND 10ft x 16 ga CNC Folder w/10ft x 14 ga Shear-Combo Pkg SAVE BIG $$!
                                            $RFQ
                                            ERBEND 10ft x 16 ga CNC Folder w/10ft x 14 ga Shear-Combo Pkg SAVE BIG $$!
                                            CALL 386-304-3720 FOR AVAILABILITY IN STOCK NOW! CALL FOR SPECIAL COMBO PRICE Distributor Overstock Mega Sale Selling At Well Below Cost with Factory Warranty. Limited Supplies Available. ERBEND 10ft x 16 ga CN
                                            • Maximum thickness capacity: 16Ga
                                            • Bending length: 126"
                                              2008 AMADA Pulsar 2415NT
                                              $RFQ
                                              2008 AMADA Pulsar 2415NT
                                              2008 AMADA Pulsar 2415NT, 4.0 KW, Max sheet size: 16’ X 5, Fanuc NT-PC Control, Year New: 2008 Model: Pulsar 2415NT Laser Power: 4.0 KW Laser Type: High Bred Max Sheet Size: 16’ X 5’ Reposition: Yes Z Axis Travel
                                              • Wattage: 4000W
                                              • X axis travel: 5'
                                                2018 AMADA LCG3015AJ
                                                $RFQ
                                                2018 AMADA LCG3015AJ
                                                AMADA LCG3015AJ, 2.0KW, 120” X 60” Max Sheet Size, Fanuc NT-PC Control, Year New: 2018 Model: LCG3015AJ Laser Power: 2.0KW Laser Type: Flying Optic Max Sheet Size: 120” X 60” Shuttle Table: Yes Z Axis Travel: 7.8
                                                • Wattage: 2000W
                                                • X axis travel: 5'
                                                  MITSUBISHI FX-1 WIRE EDM
                                                  $4,950
                                                  MITSUBISHI FX-1 WIRE EDM
                                                  SUBMERGED
                                                  • X axis travel: 14"
                                                  • Y axis travel: 10"
                                                    Categories:
                                                    Condition:
                                                    Manufacturer:
                                                    Location:
                                                    Price:
                                                    •  to 
                                                    <Prev | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | Next>