buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 801 - 900 of 21115 matches
Sort by:
Items Per Page:  20 |  50 |  100
Barrett 301-E "Spintech", 75 Lb. Load Cap,(6) Baskets, AC Vari Sp
$RFQ
Barrett 301-E "Spintech", 75 Lb. Load Cap,(6) Baskets, AC Vari Sp
New - 2005 Serial No. 3010135-E/SES SPECIFICATIONS: Load Capacity............75 Lbs. Liquid Capacity............5 Gals. Speed Infinitely Variable (AC Drive) to............1200 RPM G-Rating - Maximum............32
11" x 18" Hardinge HLV-H, Inch Thrd, Taper, 5C Collet, Compound C
$RFQ
11" x 18" Hardinge HLV-H, Inch Thrd, Taper, 5C Collet, Compound C
Serial No. HLVH-8676T New - 1990 Motor driven with 2-Speed, 3/60/230 volt variable speed drive unit with direct reading spindle speed indicator and controls. Hardinge Super-Precision ball bearing spindle. Hardinge ta
11" x 18" Hardinge HLV-H, Inch Thrd, Taper, 5C Collet, Compound C
$RFQ
11" x 18" Hardinge HLV-H, Inch Thrd, Taper, 5C Collet, Compound C
Serial No. HLV-H-11377T Year Built – 1993 Motor driven with 2-Speed, 3Ph/60Hz/460 volt variable speed drive unit with direct reading spindle speed indicator and controls. Hardinge Super-Precision ball bearing spindle
230-10 Cincinnati Twin Grip, 1/4" - 4"Ø Cap, 30 HP, 10"
$RFQ
230-10 Cincinnati Twin Grip, 1/4" - 4"Ø Cap, 30 HP, 10"
Serial No. 350800081-0006 SPECIFICATIONS: Capacity............1/4" - 4" dia. Wheels: - Grinding - widths up to 10", 12" hole.............24" dia. - Regulating - widths up to 10",
Dust Collector 1hp 30mic Delta
$349
Dust Collector 1hp 30mic Delta
Dust Collector 1hp 30mic Delta Model: AP400 [Delta] S/N: 200802XL002302 30 Micron Dust Collector 1Hp; 1Ph; 120/240Volt
  • Motor: 1HP
    Drill Press 17" FM 16Sp CM
    $349
    Drill Press 17" FM 16Sp CM
    Drill Press 17" FM 16Sp CM Model: 43389 [Central Machinery] S/N: 0511040061 17" Floor Mount 16 Speed Drill Press 1Hp; 1Ph; 120Volt
    1998 Fadal VMC-5020AHT
    $RFQ
    1998 Fadal VMC-5020AHT
    1998 Fadal VMC-5020AHT S|N 9803755 SPECIFICATIONS Max X-Axis Travel: 50" Max Y-Axis Travel: 20" Max Z-Axis Travel: 28" Rapid Traverse Rates: 800 Ip High Torque Spindle Motor Option 22.5 Hp 7
    2021 Grizzly G0895 4' x 8' CNC Router RTR#5021130-02
    $10,000
    2021 Grizzly G0895 4' x 8' CNC Router RTR#5021130-02
    Equipment located in Phoenix, AZ. 2021 Grizzly G0895 4' x 8' CNC Router, 6 HP, 1 Ph, 30 A, 15 Piece Spring Collet Set w/ Oak Collet Chest, S/N: 202110GZ0129 All equipment is sold “As Is, Where Is”. Reasonable
    2021 Grizzly 10" Sliding Table Saw RTR#5021130-01
    $2,400
    2021 Grizzly 10" Sliding Table Saw RTR#5021130-01
    Equipment located in Phoenix, AZ. 2021 Grizzly G0623X 10" Sliding Table Saw 5 HP, 1 PH Multi-Box S/N: 21120317 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be inspected by
    22"/31" x 120" Acra 22120, 19.5" 4-Jaw Ck, 4"Bore,
    $RFQ
    22"/31" x 120" Acra 22120, 19.5" 4-Jaw Ck, 4"Bore,
    Serial No. CH08824 Year Built - 2007 CATALOG SPECIFICATIONS: Swing: - Over bed............22" - Over cross slide............13-3/8" - In gap............31-3/8" Distance between centers............
    2021 Harben E-180 Sewer Jetter S/A Trailer RTR#5013684-02
    $31,500
    2021 Harben E-180 Sewer Jetter S/A Trailer RTR#5013684-02
    Unit located in Tampa, FL. 2021 Harben E-180 Sewer Jetter S/A Trailer, 4000 PSI, 18 GPM, Diesel Engine, 375 Gallon Tank, Hour Meter Reads: 283 (Unverified), VIN: 1H9X11511MC122074 All equipment is sold “As Is, Where Is
    2021 Harben E-180 Sewer Jetter S/A Trailer RTR#5013684-01
    $29,500
    2021 Harben E-180 Sewer Jetter S/A Trailer RTR#5013684-01
    Unit located in Tampa, FL. 2021 Harben E-180 Sewer Jetter S/A Trailer, 4000 PSI, 18 GPM, Diesel Engine, 375 Gallon Tank, Hour Meter Reads: 311 (Unverified), VIN: 1H9X1151XMC122073 All equipment is sold “As Is, Where Is
    130 Ton Accurpress Press Brake, ETS3000 CNC, Wila Crowning/Clamping
    $RFQ
    130 Ton Accurpress Press Brake, ETS3000 CNC, Wila Crowning/Clamping
    . We are pleased to offer for your consideration: (1) 130 ton Accurpress Hydraulic CNC Press Brake Stock Number: 13987 List Price: On Request Manufacturer: Accurpress Model Number: 713010 Serial Number: 715
    • Tonnage: 130T
      Haas VF-3 VMC, 2011 – Side-Mount ATC, High Speed Machining, 15k Spindle
      $RFQ
      Haas VF-3 VMC, 2011 – Side-Mount ATC, High Speed Machining, 15k Spindle
      Haas VF-3 VMC, 2011 – Side-Mount ATC, High Speed Machining, 15k Spindle Table Size 48″ X 18″ Maximum Table Load Capacity 3500 Lbs. Spindle Nose to Table Top 4″ – 29″ X – Axis Travel 40″ Y – Axis Travel 20″ Z – Axis
      Haas VF-3 VMC, 2011 – Side-Mount ATC, High Speed Machining, 15k Spindle
      $RFQ
      Haas VF-3 VMC, 2011 – Side-Mount ATC, High Speed Machining, 15k Spindle
      Haas VF-3 VMC, 2011 – Side-Mount ATC, High Speed Machining, 15k Spindle Table Size 48″ X 18″ Maximum Table Load Capacity 3500 Lbs. Spindle Nose to Table Top 4″ – 29″ X – Axis Travel 40″ Y – Axis Travel 20″ Z – Axis
      Cincinnati 750HS 3/4" x 10' Hydraulic Plate Shear
      $RFQ
      Cincinnati 750HS 3/4" x 10' Hydraulic Plate Shear
      Cincinnati 750HS 3/4" x 10' Hydraulic Plate Shear Year of Mfg: 1983 Mild Steel Capacity: 3/4" Cutting Length: 122.5" Max. Rake (in./ft.): 3/4" Holddown Force Tons: 32.3 Number o
      • Maximum thickness: 0.75"
      • Cutting length: 122.5"
        2020 - 72 Ton x 6.8' Ermak Green Press FX Servo Driven Press Brake
        $RFQ
        2020 - 72 Ton x 6.8' Ermak Green Press FX Servo Driven Press Brake
        Capacity 72 Tons Overal Bending Length 80" Distance Between Columns 92.9" Y Rapid Speed 6.3" /sec Y Return Speed 6.3" /sec X Axis Travel 31.5" X Axis Speed 19.69" /sec R Axis Travel 9
        • Tonnage: 72T
          1992 - 33 Ton Amada Pega 357 CNC Turret Punch
          $RFQ
          1992 - 33 Ton Amada Pega 357 CNC Turret Punch
          Capacity 33 Tons Maximum Sheet Size 50"X70" (50"X144" with repo) Maximum Punching Capacity 1/4" Maximum Hole Size (10 gauge) 3.5" Maximum Hole Size (1/4") 1.6" Rapid Feedrates
          • Tonnage: 33T
            6 ton x 18" Haeger HP6-B Hardware Insertion Press
            $RFQ
            6 ton x 18" Haeger HP6-B Hardware Insertion Press
            Capacity 6 Tons Throat Depth 18" RAM Adjustment 3/8" - 8.5" Max Workable Tool Depth 12" RAM Pressure 200 - 12,000 lbs. Overall Dimensions (approx.) 36 x 30 x 67"H Weight (approx) 1,000 lbs.
            • Tonnage: 6T
            • Throat: 18"
              2007 - 33 Ton/2,000 Watt Amada EML-3510NT CNC Punch/Laser Combo Machine
              $RFQ
              2007 - 33 Ton/2,000 Watt Amada EML-3510NT CNC Punch/Laser Combo Machine
              Capacity 33 Tons Laser Resonator 2,000 Watt Y-Axis Travel 50" X-Axis Travel 100" Rapid Traverse (X-Axis) 3937 IPM Rapid Traverse (Y-Axis) 3149 IPM Rapid Traverse (YL-Axis) 3149 IPM Rapid Traverse (Z-Axis
              2014 Prima Power SG e6 Punch shear combo
              $RFQ
              2014 Prima Power SG e6 Punch shear combo
              Model: Prima Power SG e6 Punch shear combo Tonnage: 33 Table Size: 60” X 120” Max Sheet Thickness: .312 Max Hole Diameter: 3.5” Max Sheet Size: 60” X 120” Servo Electric Ram: Yes Turret: 20 Station 4 auto index 3
              Finn Power E-Brake 100-3100 100 Ton CNC Electric Servo Press Brake
              $RFQ
              Finn Power E-Brake 100-3100 100 Ton CNC Electric Servo Press Brake
              Reference #43877 Finn Power E-Brake 100-3100 100 Ton CNC Electric Servo Press Brake FEATURES: Finn Power TS 6-Axis CNC Control 5-Axis Back Gauge X1,R,Z1,Z2,X2 Hydraulic Upper Clamping Safety Light Guard System
              • Tonnage: 100T
                C.R Onsrud Model F396G24 5-Axis Pro Series CNC Router
                $RFQ
                C.R Onsrud Model F396G24 5-Axis Pro Series CNC Router
                Reference #43875 C.R Onsrud Model F396G24 5-Axis Pro Series CNC Router FEATURES: Fanuc 31-B5 CNC Control Dekker V-Max Liquid Ring 40HP Vacuum Pump 12-Station Automatic Tool Changer 60" x 408" Aluminum
                4.33" Doosan DBC-110 CNC Table Type Horizontal Boring Mill
                $RFQ
                4.33" Doosan DBC-110 CNC Table Type Horizontal Boring Mill
                Doosan DBC110, X-98", Y-78", Fanuc 31i, 55" x 71" B-Axis Table, 4,000 RPM, 40 HP, 60 ATC, CTS, 2013, #43874
                • Spindle diameter: 4.33"
                • X axis travel: 98"
                  Cincinnati-Milacron RADIUS GRINDING FIXTURE GRINDER ATTACHMENT
                  $RFQ
                  Cincinnati-Milacron RADIUS GRINDING FIXTURE GRINDER ATTACHMENT
                  CINCINNATI-MILACRON RADIUS ATTACHMENT   ** BEAUTIFUL CONDITION **   ** F.O.B. OUR HARRISON, NJ WAREHOUSE ** FOR MORE INFORMATION: Call Andy at 973-497-7600
                  Hybco 1900, 2100SB MTR'D REL. FIXTURE, COMPARATOR TOOL CUTTER GRINDER, NEW 1988
                  $RFQ
                  Hybco 1900, 2100SB MTR'D REL. FIXTURE, COMPARATOR TOOL CUTTER GRINDER, NEW 1988
                     HYBCO FORM RELIEVING GRINDER w/OPTICAL COMPARATOR     ** CHOICE OF HYBCO MOTORIZED RELIEVING WORKHEAD,    FOR 5C COLLETS OR ERICKSON COLLETS **   ** "LISTA CABINE
                  2500Lb Cap. 12" Width American Steel Line 60 UNCOILER, Motorized
                  $4,250
                  2500Lb Cap. 12" Width American Steel Line 60 UNCOILER, Motorized
                    2,500 LB.X 12" AMERICAN STEEL LINE MOTORIZED COIL REEL* MODEL 60           S/N 2847         Year 1973   Capac
                  Kia Super KiaTurn 21LMS CNC LATHE, Fanuc 0iTB, Live Tool, Subspindle, Chip Conveyor
                  $RFQ
                  Kia Super KiaTurn 21LMS CNC LATHE, Fanuc 0iTB, Live Tool, Subspindle, Chip Conveyor
                  KIA KIATURN 21 LMS CNC TURNING CENTER W/ MILLING & SUB SPINDLE NEW: 2004   Video Link: https://youtu.be/e0NWEVjw5co SPECIFICATIONS: Swing Over Bed          &
                  400 CFM 0.33HP Motor Cyclone DUST COLLECTOR
                  $395
                  400 CFM 0.33HP Motor Cyclone DUST COLLECTOR
                      CYCLONE MANUFACTURING DUST COLLECTOR   SANDBLASTER CABINET DUST COLLECTOR   CUBIC FEET PER MINUTE:  400 CFM APPROXIMATE DIMENSIONS: 20"W x 20"H x 80"H MOTOR SIZE:  
                  1" Dia. Tsugami BA-26 CNC SWISS TYPE LATHE, w/LNS Quickload Servo S3, Live Tool, Sub
                  $12,500
                  1" Dia. Tsugami BA-26 CNC SWISS TYPE LATHE, w/LNS Quickload Servo S3, Live Tool, Sub
                  TSUGAMI BA-26 SWISS TYPE CNC LATHE NEW: 2006   Video Links: https://youtube.com/shorts/WRD5yxyjC8E?feature=share https://youtube.com/shorts/wUuTyWTB7NA?feature=share https://youtube.com/shorts/WRD5yxyjC8E?feat
                  1.5HP Motor Airflow Systems DUST COLLECTOR
                  $595
                  1.5HP Motor Airflow Systems DUST COLLECTOR
                      AIRFLOW SYSTEMS DUST COLLECTOR   APPROXIMATE DIMENSIONS:   24"W x 28"D 72"H MOTOR SIZE:   1.5 HORSE POWER   INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUS
                  2.8' Arm Lth 8" Col Dia Willis-Bergonzi 850 RADIAL DRILL, #4MT, Box Tbl, 1.7HP,Pwr El
                  $3,950
                  2.8' Arm Lth 8" Col Dia Willis-Bergonzi 850 RADIAL DRILL, #4MT, Box Tbl, 1.7HP,Pwr El
                  2'9" X 8" WILLIS RADIAL DRILL MODEL: FM-850, S/N: C-889, NEW: 1970   SPECIFICATIONS: MAXIMUM DISTANCE SPINDLE TO COLUMN .. 33-1/4" MINIMUM DISTANCE SPINDLE TO COLUMN .. 9" COLUMN DIAMETER .
                  2.5" Dia. 6 Length LNS Super Hydrobar 6.65HS-3.3 BAR FEED
                  $RFQ
                  2.5" Dia. 6 Length LNS Super Hydrobar 6.65HS-3.3 BAR FEED
                  LNS SUPER HYDROBAR 6.65HS-3.3 BARFEED New: 2011     SIX GUIDE TUBES WITH INTERNAL DIAMETERS OF:   2.638" FOR 2-1/4" TO 2-1/2" DIAMETER BARSTOCK   2.362" FOR 2"
                  Amada TEG-160E, NEW 1988, COOLANT, 3-JAW CHUCK, PUNCH GRINDER, GRINDING WHEEL, STAND
                  $RFQ
                  Amada TEG-160E, NEW 1988, COOLANT, 3-JAW CHUCK, PUNCH GRINDER, GRINDING WHEEL, STAND
                      Amada Punch & Die Grinder   Model: TEG160E    S/N: HH3317   NEW: 1988   7" Diameter Cup Wheel with 1-1/4" Hole Table Size:  6" F-B x
                  10" Swing 20" Centers Landis TYPE 1R, 1975, SWING DOWN I.D., OD GRINDER, HYD. TA
                  $RFQ
                  10" Swing 20" Centers Landis TYPE 1R, 1975, SWING DOWN I.D., OD GRINDER, HYD. TA
                    10" X 20" LANDIS (MADE IN USA) "HIGH-PRECISION"   UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER   MODEL: 1R       S/N: 858-96    &n
                  50 Ton 12" Stroke Pressmaster HFP-50 MWH H-FRAME HYDRAULIC PRESS, Powered Movable Wor
                  $20,950
                  50 Ton 12" Stroke Pressmaster HFP-50 MWH H-FRAME HYDRAULIC PRESS, Powered Movable Wor
                    50 TON PRESSMASTER H-FRAME PRESS MODEL HFP50T-MWH      NEW - IN STOCK FOR IMMEDIATE DELIVERY   RATED CAPACITY ............................... 50 TONS STROKE ....................
                  18" Width 0.125" Cap. Perfecto 3.8-18-7 STRAIGHTENER
                  $19,500
                  18" Width 0.125" Cap. Perfecto 3.8-18-7 STRAIGHTENER
                    18" X .125" PERFECTO STRAIGHTENER* MODEL 3.8-18-7           S/N SS-4520           NEW 1985   M
                  8" Swing 10" Centers Shigiya GUA-20-25, 1987, MADE IN JAPAN, FULL AUTO CYCLE OD
                  $RFQ
                  8" Swing 10" Centers Shigiya GUA-20-25, 1987, MADE IN JAPAN, FULL AUTO CYCLE OD
                     8" X 10" SHIGIYA (JAPANESE) HIGH-PRECISION          UNIVERSAL CYLINDRICAL GRINDER     MODEL: GUA-20-25     S
                  200 KVA 24" Throat T.J. Snow 100AO SPOT WELDER
                  $14,950
                  200 KVA 24" Throat T.J. Snow 100AO SPOT WELDER
                    200 KVA NATIONAL (TJ SNOW) PRESS TYPE SPOT WELDER MODEL  100AO      S/N  X-50528.   Primary Voltage ................... 240 V / 1 / 60 KVA ...........................
                  6" Width 18" Length Acra 618AH Automatic 2-Axis SURFACE GRINDER
                  $RFQ
                  6" Width 18" Length Acra 618AH Automatic 2-Axis SURFACE GRINDER
                  NEW Acra 618AH Semi-Automatic 2 Axis Precision Surface Grinder   Rigid Construction: • All main elements are made of “Meehanite GC275” castings which had been annealed stress relieved for lon
                  6" Width 18" Length Acra 618S Manual SURFACE GRINDER
                  $RFQ
                  6" Width 18" Length Acra 618S Manual SURFACE GRINDER
                  NEW ACRA 618S Manual Super Precision Surface Grinder   • Table surface guaranty (Testing grinding piece* 6, thickness difference.): 0.0001 “ • 2HP V3 grade low vibration spindle motor ̶
                  11" Swing 18" Centers Acra ATL618E PRECISION LATHE, 5HP, with Digital Threading
                  $RFQ
                  11" Swing 18" Centers Acra ATL618E PRECISION LATHE, 5HP, with Digital Threading
                  NEW ACRA HIGH SPEED/HIGH ACCURACY TOOLROOM LATHE MODEL: ATL618E W/DIGITAL THREADING CONTROL   SPECIFICATIONS: WITH CHUCK: ....................... 6″ WITH EXPANDING COLLETS: ........... 3″ WITH
                  14" Screen Jones Lamson PC-14A, 1984, 50X LENS, ACU-RITE 2X DRO OPTICAL COMPARATOR,
                  $RFQ
                  14" Screen Jones Lamson PC-14A, 1984, 50X LENS, ACU-RITE 2X DRO OPTICAL COMPARATOR,
                    14" JONES & LAMSON OPTICAL COMPARATOR & MEASURING MACHINE       WITH ACU-RITE 2-AXIS DIGITAL READOUT   MODEL: PC-14A     S/N: C-521607 &
                  16" Width 32" Length Supertec PLANOTEC 1632CII, 2006, PROG. AUTO IDF, 3X AUTO SU
                  $RFQ
                  16" Width 32" Length Supertec PLANOTEC 1632CII, 2006, PROG. AUTO IDF, 3X AUTO SU
                        16" X 32" SUPERTEC "PLANOTEC" SERIES  "HIGH-PRECISION" "MADE IN TAIWAN" SURFACE GRINDER WITH MITSUBISHI PLC WITH TOUCH SCREEN AUTO IDF
                  11" Swing 18" Centers Ganesh GHT-618EVS ENGINE LATHE
                  $RFQ
                  11" Swing 18" Centers Ganesh GHT-618EVS ENGINE LATHE
                  NEW GANESH TOOLROOM LATHE MODEL: GHT-618 EVS   3-HORSEPOWER ELECTRONIC VARIABLE-SPEED INVERTER MOTOR 130 - 4000 RPM INFINITELY VARIABLE SPINDLE SPEEDS 11” SWING X 18” BETWEEN CENTERS POWER FEEDS IN
                  19.7" Swing 71" Centers Toyoda GUP40-180, 1982, HEAVY CAPACITY, FULL AUTO CYCLE
                  $RFQ
                  19.7" Swing 71" Centers Toyoda GUP40-180, 1982, HEAVY CAPACITY, FULL AUTO CYCLE
                   19.685" X 71" TOYODA UNIVERSAL CYLINDRICAL GRINDER   ** THIS IS A HIGH-PRECISION "MADE IN JAPAN" MACHINE TOOL! **   MODEL: GUP40-180      S/N: RB5459  
                  11" Swing 18" Centers Hardinge HLV-EM Reconditioned 2023 PRECISION ENGINE LATHE,
                  $32,950
                  11" Swing 18" Centers Hardinge HLV-EM Reconditioned 2023 PRECISION ENGINE LATHE,
                  HARDINGE SUPER PRECISION TOOL ROOM LATHE MODEL HLV-EM, S/N: HLV-H 10403-T MACHINE RECONDITIONED IN 2023     SPECIFICATIONS: SPINDLE CONSTRUCTION ................. HARDINGE BALL BEARING SPINDLE NOSE THR
                  10 Ton 24" Stroke Dake 28-329 HYDRAULIC PRESS
                  $8,950
                  10 Ton 24" Stroke Dake 28-329 HYDRAULIC PRESS
                    DAKE 10-TON HYDRAULIC C-FRAME PRESS MODEL 28-329         S/N 137135   Capacity .......................... 0-10 tons (adj.) Stroke ............................ 24&q
                  1200 Lbs. Rowe 810 COIL CRADLE
                  $950
                  1200 Lbs. Rowe 810 COIL CRADLE
                    1,200 LB. ROWE COIL CRADLE MODEL 810     COIL CAPACITY ........... 1,200# FEED RATE ............... 90' PER MINUTE WIDTH ................... 10" O.D. .................... 36"  
                  4000Lb Cap. 12" Width Aida DOUBLE END UNCOILER
                  $9,450
                  4000Lb Cap. 12" Width Aida DOUBLE END UNCOILER
                    AIDA 4,000 LB. DOUBLE END POWERED REEL   Capacity .............. 4,000 lbs (each side) Rated width ........... 12"   Machine is equipped with: - 180 degree rotation with locking mechanism -
                  200Lb Cap. 8" Width P/A Ind SRA-200 UNCOILER
                  $1,950
                  200Lb Cap. 8" Width P/A Ind SRA-200 UNCOILER
                    200 LB. P/A INDUSTRIES NON-MOTORIZED UNCOILER MODEL SRA-200       S/N X16997/93825   COIL CAPACITY .......................... 200 LBS. MAXIMUM WIDTH ........................
                  200Lb Cap. 8" Width P/A Ind SRA 200 UNCOILER
                  $1,950
                  200Lb Cap. 8" Width P/A Ind SRA 200 UNCOILER
                    200 LB. P/A INDUSTRIES NON-MOTORIZED UNCOILER MODEL SRA-200   COIL CAPACITY .......................... 200 LBS. MAXIMUM WIDTH .......................... 8" MAXIMUM O.D. ...........................
                  31.49" X Axis DMG - DECKEL MAHO Lasertec 80 PowerShape LASER, Siemens 840D 3D Cntrl,H
                  $RFQ
                  31.49" X Axis DMG - DECKEL MAHO Lasertec 80 PowerShape LASER, Siemens 840D 3D Cntrl,H
                  DMG-SAUER 5 AXIS CNC LASERTEC MODEL: 80 POWERSHAPE, S/N: 11420000557, NEW: 2006   SPECIFICATIONS: CLAMPING TABLE SIZE: ............. 7.87" - 200mm X-AXIS TRAVEL: ................... 31.49" - 800mm Y
                  2.5" Dia. 12 Length LNS Hydrobar 6.65HS-5.2 New 1990 BAR FEED, Hydraulic Tank, Stands
                  $4,950
                  2.5" Dia. 12 Length LNS Hydrobar 6.65HS-5.2 New 1990 BAR FEED, Hydraulic Tank, Stands
                  LNS Hydrobar 6.65HS-5.2 Barfeed New: 1990 S/N: 32324   SPECIFICATIONS: MAX LENGTH OF BAR STOCK .................. 12' SIX GUIDE TUBES WITH INTERNAL DIAMETERS OF:   2.638" FOR 2-1/4" TO 2-1/
                  36 Porter Cable G8 BELT GRINDER
                  $RFQ
                  36 Porter Cable G8 BELT GRINDER
                  Porter Cable Model G8, S/N:809 FOR MORE INFORMATION: Call Andy at 973-497-7600
                  32" Swing 80" Centers Acer Dynamic 3280L ENGINE LATHE, 4.5" Bore, D1-11, 15
                  $RFQ
                  32" Swing 80" Centers Acer Dynamic 3280L ENGINE LATHE, 4.5" Bore, D1-11, 15
                  NEW ACER PRECISION ENGINE LATHE MODEL: 3280L   SPECIFICATIONS: SWING OVER BED: ...................... 32" SWING OVER GAP: ...................... 41" SWING OVER CROSS SLIDE: .............. 23.3"
                  10 Ton 1.5" Stroke Bliss 18C OBI PRESS
                  $1,450
                  10 Ton 1.5" Stroke Bliss 18C OBI PRESS
                    10 Ton Bliss OBI Mechanical Clutch Press Model 18   Specifications: Capacity ...................... 10 Ton Stroke ........................ 1-1/2" Shut Height ................... 7" Speed ...
                  20 Ton 1.5" Stroke Bliss HORN PRESS, Horn Press
                  $2,250
                  20 Ton 1.5" Stroke Bliss HORN PRESS, Horn Press
                      Bliss Adjustable Bed / Horn Press Mechanical Clutch - Air Operated   Capacity ................ 20 Ton Stroke .................. 1-1/2 in. Bed Area ................ 10" x 15-1/2" Bed T
                  GMC ROLL FORMER
                  $RFQ
                  GMC ROLL FORMER
                    Used GMC Pittsburgh Rollforming Machine Model PL-16E        S/N 13-02281303   Maximum Capacity - 16 Ga. Mild Steel   Specifications: Depth of Pocket: 1/2"
                  16" Width 32" Length Okamoto ACC-1632DX, NEW 1992, 3-AXIS AUTOMATIC, SURFACE GRI
                  $RFQ
                  16" Width 32" Length Okamoto ACC-1632DX, NEW 1992, 3-AXIS AUTOMATIC, SURFACE GRI
                     16" X 32" OKAMOTO "HIGH-PRECISION" SURFACE GRINDER    WITH "DX" PROGRAMMABLE AUTO INCREMENTAL DOWNFEED    MODEL: ACC-1632DX    
                  10" Swing 20" Centers Landis 1R, NEW 1991, FULL AUTO CYCLE, OD GRINDER, HYD. TAB
                  $RFQ
                  10" Swing 20" Centers Landis 1R, NEW 1991, FULL AUTO CYCLE, OD GRINDER, HYD. TAB
                           10" X 20" LANDIS   HYDRAULIC UNIVERSAL CYLINDRICAL GRINDER        **** MADE IN USA ****      M
                  50" Width 43" Height Zero Blast BNP220, SUCTION TYPE, RPH-2R COLLECTOR, RECLAIME
                  $RFQ
                  50" Width 43" Height Zero Blast BNP220, SUCTION TYPE, RPH-2R COLLECTOR, RECLAIME
                  ZERO BLAST CABINET, SUCTION TYPE       MODEL: BNP220 ORDER No. 14086 S/N: 48924     NEW: 1998     ZERO BLAST MODEL RPH-2R COLLECTOR ORDER No. 5033-0600 SERIAL NUMBER 42
                  1.5" Dia. Cap 7.5hp Motor HP Royal Master TG12X3, REBUILT BY RMG IN 1998 CENTERLESS G
                  $RFQ
                  1.5" Dia. Cap 7.5hp Motor HP Royal Master TG12X3, REBUILT BY RMG IN 1998 CENTERLESS G
                         ROYAL MASTER TG12X3 CENTERLESS GRINDER  WITH AUTO CYCLE OPTION, RBUILT BY  ROYAL MASTER IN 1998   S/N: 409        CAPACITY: INFEED AND THRUFEED ...
                  Collins GRANITE SURFACE PLATE
                  $RFQ
                  Collins GRANITE SURFACE PLATE
                  COLLINS "MICROFLAT" GRANITE SURFACE PLATE           WITH TABLE BASE     36" x 24" x 6" THICK FOUR WAY LEDGE HEIGHT FROM FLOOR TO
                  8" Swing 14" Centers Brown Sharpe 814 U VALUEMASTER, I.D. ATT., I.D. SPINDLE, O
                  $RFQ
                  8" Swing 14" Centers Brown Sharpe 814 U VALUEMASTER, I.D. ATT., I.D. SPINDLE, O
                    8" x 14" BROWN & SHARPE "PRECISION" UNIVERSAL    I.D./O.D. CYLINDRICAL GRINDER     ******* MADE IN USA *******   MODEL: 814U VALUEMASTER &nb
                  LNS TURBO HB CHIP CONVEYOR
                  $3,400
                  LNS TURBO HB CHIP CONVEYOR
                  LNS TURBO HB CHIP CONVEYOR MODEL: 57508491   From a Doosan Lynx 220LYA   *Coolant Pan in Photos Not Included* FOR MORE INFORMATION: Call Mike at 973-497-7540
                  0.62" Rivet Cap 9" Throat VSI Automation TM-23 RIVETER
                  $6,950
                  0.62" Rivet Cap 9" Throat VSI Automation TM-23 RIVETER
                    5/8" VSI ORBITAL RIVETER MODEL TM-23     S/N 31410     NEW 1996       Capacity ......................... .06" -.62" diameter Stroke .
                  0.62" Rivet Cap 9" Throat VSI Automation TM-23 RIVETER
                  $6,950
                  0.62" Rivet Cap 9" Throat VSI Automation TM-23 RIVETER
                    5/8" VSI ORBITAL RIVETER MODEL TM-23     S/N 31410.2     NEW 1996       Capacity ......................... .06" -.62" diameter Stroke
                  8" Width 24" Length Thompson 2F, HYD. TABLE CROSSFEED, POWER ELEV. SURFACE GRIN
                  $RFQ
                  8" Width 24" Length Thompson 2F, HYD. TABLE CROSSFEED, POWER ELEV. SURFACE GRIN
                    8" X 24" THOMPSON "TOP NOTCH" "HEAVY DUTY" PRECISION HYDRAULIC SURFACE GRINDER,    2-AXIS AUTOMATIC FEEDS WITH POWER RAPID WHEELHEAD POSITIONING   MODEL:
                  42" Chuck 35HP Spindle Blanchard 18-42, S/N: 10895, 7/16" CHUCK LIFE, WET BASE R
                  $RFQ
                  42" Chuck 35HP Spindle Blanchard 18-42, S/N: 10895, 7/16" CHUCK LIFE, WET BASE R
                     42" BLANCHARD ROTARY SURFACE GRINDER     MODEL: #18-42      S/N: 10895    NEW: 1960   CHUCK DIAMETER ...................... 42"
                  Myford INTERNAL GRINDING ATTACHMENT GRINDER ATTACHMENT
                  $RFQ
                  Myford INTERNAL GRINDING ATTACHMENT GRINDER ATTACHMENT
                  Myford Swing Down ID Grinding Attachment with Spindle   FOR MORE INFORMATION: Call Andy at 973-497-7600
                  8" Dia. 3 Jaws Kitagawa B208 LATHE CHUCK, Hydraualic
                  $850
                  8" Dia. 3 Jaws Kitagawa B208 LATHE CHUCK, Hydraualic
                  KITAGAWA B208 3-JAW HYDRAULIC CHUCK FOR MORE INFORMATION: Call Mike at 973-497-7540
                  40" Swing Heald 172-GAP, MANY UPDATES, FROM AERSOPACE, ID GRINDER, RED HEAD SPINDLE,
                  $RFQ
                  40" Swing Heald 172-GAP, MANY UPDATES, FROM AERSOPACE, ID GRINDER, RED HEAD SPINDLE,
                    HEALD MODEL #172 LARGE CAPACITY I.D. GRINDER  WITH GAP FOR LARGE SWING PARTS   S/N: 28365           MAXIMUM SWING INSIDE CHUCK GUARDS: 40" TABLE SPEEDS
                  30" Screen Scherr-Tumico 22-2601, 2002, QC2000 DRO w/PROG. GEO FUNCT. OPTICAL COMPARA
                  $RFQ
                  30" Screen Scherr-Tumico 22-2601, 2002, QC2000 DRO w/PROG. GEO FUNCT. OPTICAL COMPARA
                                                      &nbs
                  6" Width 12" Length Swisher MARK V, 1984, AUTO, STATIONARY TABLE SWEEPING SPDL S
                  $RFQ
                  6" Width 12" Length Swisher MARK V, 1984, AUTO, STATIONARY TABLE SWEEPING SPDL S
                         SWISHER VERTICAL SPINDLE STATIONARY TABLE          SWEEPING VERTICAL SPINDLE GRINDER        WI
                  30" Width 36" Length Marathon 3630 BALER
                  $2,950
                  30" Width 36" Length Marathon 3630 BALER
                    MARATHON VERTICAL BALER MODEL 3630      S/N 42877   CYCLE TIME ............................ 28 SECONDS MAXIMUM OPERATING FORCE ............... 19.65 TONS    &nbs
                  K.O. Lee B942 NON MOTORIZED WORKHEAD GRINDER ATTACHMENT
                  $RFQ
                  K.O. Lee B942 NON MOTORIZED WORKHEAD GRINDER ATTACHMENT
                  K.O. LEE B942 NON-MOTORIZED SENSITIVE WORKHEAD   INDEX PLATE 5C COLLET DRAW BAR WORKHEAD TILTS AND SWIVELS, WITH GRADUATED  DISPLAYS   ** SUPERB CONDITION ** ** F.O.B. HARRISON, NJ ** FOR MORE I
                  20" Swing 1.5HP Spindle Clausing 2287 DRILL PRESS
                  $4,500
                  20" Swing 1.5HP Spindle Clausing 2287 DRILL PRESS
                  20" CLAUSING VARIABLE SPEED DRILL PRESS w/ PRODUCTION TABLE MODEL: 2287,  S/N: 521847,  NEW: 2007   SPECIFICATIONS: CAPACITY - CAST IRON ................. 1-1/4" DRILLS TO CENTER OF CIRCLE
                  K.O. Lee B6062H, DAKOTA,1980, HYD. TABLE, MOTORIZED WKHD, TOOL CUTTER GRINDER, WHEELHEAD
                  $RFQ
                  K.O. Lee B6062H, DAKOTA,1980, HYD. TABLE, MOTORIZED WKHD, TOOL CUTTER GRINDER, WHEELHEAD
                    K.O. LEE "DAKOTA" SERIES - WITH HYDRAULIC TABLE TRAVERSE,             UNIVERSAL TOOL & CUTTER GRINDER       
                  Nova 1458 DRILL PRESS
                  $RFQ
                  Nova 1458 DRILL PRESS
                  FOR MORE INFORMATION: Call David at 973-497-7570
                  6" Width 12" Length MITSUI MSG-200MH, NEW 1990, 2X DRO, ROLLER BEARING TABLE SUR
                  $RFQ
                  6" Width 12" Length MITSUI MSG-200MH, NEW 1990, 2X DRO, ROLLER BEARING TABLE SUR
                    6" X 12" MITSUI "HIGH-PRECISION" (MADE IN JAPAN)   HAND FEED SURFACE GRINDER w/ROLLER BEARING TABLE          **  MITUTOYO 2-AXIS DIGIT
                  51" X Axis 35" Y Axis Milltronics HM-35 HORZ MACHINING CENTER, 7200 4-Axis Contr
                  $34,500
                  51" X Axis 35" Y Axis Milltronics HM-35 HORZ MACHINING CENTER, 7200 4-Axis Contr
                  MILLTRONICS HORIZONTAL MACHINING CENTER MODEL: HM35, S/N: 10398, NEW: 2008   SPECIFICATIONS: X-AXIS TRAVEL ................... 51″ Y-AXIS TRAVEL ................... 35" Z-AXIS TRAVEL ...............
                  23.6" X Axis 24" Y Axis Kiwa KNH-426X HORZ MACHINING CENTER, Fanuc18iMB 4-Axis C
                  $29,500
                  23.6" X Axis 24" Y Axis Kiwa KNH-426X HORZ MACHINING CENTER, Fanuc18iMB 4-Axis C
                  KIWA 4-AXIS HORIZONTAL MACHINING CENTER MODEL: KNH-426X 6APC, S/N: JK7743, NEW: 2002   SPECIFICATIONS: PALLET SIZE .......................... 15.7" X 15.7" (400mm) MACHINE TRAVELS:   X-AXI
                  36" Throat 12" Height DoAll 3612-H VERTICAL BAND SAW, Vari-speed, Hydraulic Tabl
                  $3,500
                  36" Throat 12" Height DoAll 3612-H VERTICAL BAND SAW, Vari-speed, Hydraulic Tabl
                  36" DOALL BANDSAW W/HYDRAULIC TABLE FEED MODEL: 3612-H,  S/N: 272-69160,  NEW: 1969   SPECIFICATIONS: THROAT BAND TO COLUMN.................. 35-1/2" MAXIMUM WORK HEIGHT...................
                  255 Amp Lincoln SQUAREWAVE TIG 255 ARC WELDER
                  $2,450
                  255 Amp Lincoln SQUAREWAVE TIG 255 ARC WELDER
                    255 AMP LINCOLN TIG WELDER MODEL SQUARE WAVE TIG 255          S/N 10022-U1940500599 NEW 1994   AMP ................................... 255 @ 40% duty cycle
                  6" Chuck 1HP Spindle Taft Peirce 6" ROTARY, TILT SPINDLE, TILT CHUCK, ROTARY SUR
                  $RFQ
                  6" Chuck 1HP Spindle Taft Peirce 6" ROTARY, TILT SPINDLE, TILT CHUCK, ROTARY SUR
                    6" TAFT PEIRCE ROTARY SURFACE GRINDER   TILTING CHUCK & GRINDING WHEEL SPINDLE FEATURES **     SERIAL NUMBER:  160     CHUCK ..................... 6- 1/4" O
                  36" Throat 13" Height DoAll 3613-0 VERTICAL BAND SAW, Vari-Speed, 3/4" Blad
                  $3,500
                  36" Throat 13" Height DoAll 3613-0 VERTICAL BAND SAW, Vari-Speed, 3/4" Blad
                  36" DOALL VERTICAL BANDSAW  MODEL: 3613-0, S/N:278-70299, NEW: 1970    SPECIFICATIONS:                   &
                  0.25" Cap. 8.66" Leg Length Amada CSHW-220 NOTCHER
                  $9,950
                  0.25" Cap. 8.66" Leg Length Amada CSHW-220 NOTCHER
                       .236" x 8.66" x 8.66" AMADA CSHW-220 Hyd. Notcher Model CSHW-220      S/N 22000255   New 1986   Specifications: Maximum Thickness Capacity
                  Niagara 180 CRIMP BEADING MACHINE
                  $6,950
                  Niagara 180 CRIMP BEADING MACHINE
                    NIAGARA MOTORIZED COMBINATION ROTARY MACHINE MODEL 180         S/N 62414        NEW 1972   INTERCHANGEABLE ROLLS MAKE THIS MACHI
                  0.5" Dia. Citizen M-12 2M3 CNC SWISS TYPE LATHE, Iemca MiniBoss 325
                  $19,500
                  0.5" Dia. Citizen M-12 2M3 CNC SWISS TYPE LATHE, Iemca MiniBoss 325
                  CITIZEN M-12 (2M3) CNC SWISS SCREW MACHINE NEW: 1999   Video Link: https://youtu.be/a_8oOouuaak   General Specifications: CNC Control:            &nb
                  6" Width 18" Length Reid 618-HR ROLLERWAY, 1983, ACU-RITE 2X DRO, EMC SURFACE GR
                  $RFQ
                  6" Width 18" Length Reid 618-HR ROLLERWAY, 1983, ACU-RITE 2X DRO, EMC SURFACE GR
                             6" X 18" REID "ROLLERWAY"            PRECISION (MADE IN USA)   &nb
                  50 Ton 12" Stroke Pressmaster CFP-50 HYDRAULIC PRESS
                  $47,500
                  50 Ton 12" Stroke Pressmaster CFP-50 HYDRAULIC PRESS
                    50 TON PRESSMASTER C-FRAME HYDRAULIC PRESS MODEL CFP-50 REFURBISHED BY THE FACTORY ALMOST ALL PARTS HAVE BEEN REPLACED WITH NEW              &n
                  20 Ton 12" Stroke Pressmaster CFP20T HYDRAULIC PRESS
                  $32,500
                  20 Ton 12" Stroke Pressmaster CFP20T HYDRAULIC PRESS
                    20 TON PRESSMASTER C-FRAME HYDRAULIC PRESS MODEL CFP-20T         S/N 122205230323 COMPLETELY REFURBISHED BY PRESSMASTER WITH ALMOST ALL INTERNAL COMPONENTS REPLACED &n
                  Nakamura-Tome WTS-150, 11 axis, CNC LATHE, Fanuc 16iTB, 3 Turret, 2 Y-Axes, 2 Spindle
                  $75,000
                  Nakamura-Tome WTS-150, 11 axis, CNC LATHE, Fanuc 16iTB, 3 Turret, 2 Y-Axes, 2 Spindle
                  NAKAMURA-TOME WTS-150 11-AXIS CNC TURNING/MILLING CENTER NEW: 2004   SPECIFICATIONS: MAX. TURNING DIAMETER ........... 12.20" MAX. TURNING LENGTH ............. 10.03" BAR CAPACITY L/R SPINDLES ......
                  34.5" Swing 30.25" Stroke Cincinnati-Heald 274 UNIVERSAL WITH LONG BASE ID GRIND
                  $RFQ
                  34.5" Swing 30.25" Stroke Cincinnati-Heald 274 UNIVERSAL WITH LONG BASE ID GRIND
                    CINCINNATI-MILACRON HEALD MODEL No. 274 UNIVERSAL    "LARGE CAPACITY - LONG BASE INTERNAL GRINDER"      MODEL:  No. 274      S/N:
                  200 Ton 20" Stroke Pressmaster HFP-200 MWH H-FRAME HYDRAULIC PRESS
                  $54,950
                  200 Ton 20" Stroke Pressmaster HFP-200 MWH H-FRAME HYDRAULIC PRESS
                    200 TON PRESSMASTER H-FRAME HYD. PRESS MODEL HFP-200 MWH         BRAND NEW   RATED CAPACITY, TONNAGE ........................ 200 STROKE ..........................
                  50 KVA 24" Throat Alphil AR24 SPOT WELDER
                  $2,950
                  50 KVA 24" Throat Alphil AR24 SPOT WELDER
                    50 KVA ALPHIL PRESS TYPE SPOT WELDER MODEL AR24     S/N 3796     NEW MID 70'S                 &
                  12" Swing 31.89" Centers Knuth Basic Plus Mechanics Lathe ENGINE LATHE, 5 YEAR M
                  $RFQ
                  12" Swing 31.89" Centers Knuth Basic Plus Mechanics Lathe ENGINE LATHE, 5 YEAR M
                     BASIC PLUS MECHANICS LATHE    *** 5 Year Warranty ***     Cast-iron bed, heavily ribbed Hardened and ground headstocks gears Induction-hardened and precision-ground box ways Ga
                  1" Dia. Optima UNIVERSAL DRILL GRINDER, OPTICAL COMPARATOR, NICELY TOOLED
                  $RFQ
                  1" Dia. Optima UNIVERSAL DRILL GRINDER, OPTICAL COMPARATOR, NICELY TOOLED
                    OPTIMA (MADE IN SWITZERLAND) "HIGH-PRECISION" DRILL GRINDER   MODEL: UNIVERSAL       S/N:  B186.022   RANGE................................. .0135&qu
                  300 Ton 20" Stroke Pressmaster HFP-300/MWH H-FRAME HYDRAULIC PRESS, With Moveable Wor
                  $84,950
                  300 Ton 20" Stroke Pressmaster HFP-300/MWH H-FRAME HYDRAULIC PRESS, With Moveable Wor
                    300 TON PRESSMASTER HYD. H-FRAME PRESS MODEL HFP-300 MWH          NEW AND IN STOCK   RATED CAPACITY, TONNAGE.......................... 300 STROKE.............
                  Categories:
                  Condition:
                  Manufacturer:
                  Location:
                  Price:
                  •  to 
                  1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>