buy & sell, new & used machinery, machine tools & equipment

<Prev | 111 | 112 | 113 | 114 | 115 | 116 | 117 | 118 | 119 | 120 | Next>
Refine: Viewing 11101 - 11200 of 20798 matches
Sort by:
Items Per Page:  20 |  50 |  100
37 Ton, ENGEL, #1010BA, 10' x 16 ga. capacity, hydraulic, 10 HP, SA
$RFQ
37 Ton, ENGEL, #1010BA, 10' x 16 ga. capacity, hydraulic, 10 HP, SA
Model 1010BA SPECIFICATIONS: Capacity 37 tons Bending length, overall 120" Bending capacity at full length
10 Ga. x 10', GMC, No. HBB-1010, hydraulic, 5 HP, NEW
$RFQ
10 Ga. x 10', GMC, No. HBB-1010, hydraulic, 5 HP, NEW
OPTIONAL ACCESSORIES: One-piece straight finger instead of assorted fingers, extra . . . $ 2,995.00 Safety fence for enclosure of the front side of the machine. . . . 1,150.00 SPECIFICATIONS: Bending length
STEINWEG, #B32, 1-1/4" capacity, 1.8/2.8 HP, 1975
$RFQ
STEINWEG, #B32, 1-1/4" capacity, 1.8/2.8 HP, 1975
BENDING CAPACITIES: Single bends (65,000 psi)--1 bar 1-1/4" --2 bars 15/16" --3 bars 3/4" --4 bars 11/16" --5 bars 9/16" (92,000 psi)--1 b
16' x 32' x 10' PAINT BOOTH SYSTEM
$RFQ
16' x 32' x 10' PAINT BOOTH SYSTEM
Paint Booth System Dimensions - 16' x 32' x 10' Currently Installed in USA Plant
LEWIS Mdl# 2CV-5 WIRE STRAIGHTENER AND CUT OFF MACHINE WITH 12' ' RACK
$RFQ
LEWIS Mdl# 2CV-5 WIRE STRAIGHTENER AND CUT OFF MACHINE WITH 12' ' RACK
WIRE DIAMETER .................. 5/16" FPM ............................ 65 - 200 RACK ........................... 12' WITH VARIDRIVE MOTOR AND CONTROLS O.A. DIM: 204" X 35" X 57"
LEWIS Mdl# 2-C4 WIRE STRAIGHTENING AND CUT MACHINE WITH 8' RACK
$RFQ
LEWIS Mdl# 2-C4 WIRE STRAIGHTENING AND CUT MACHINE WITH 8' RACK
WIRE DIAMETER ............ 1/16" - 1/4" FPM ...................... 65 - 200 RACK ..................... 8' WITH VARIDRIVE MOTOR AND CONTROLS 3 HP MOTOR E
SHUSTER Mdl# 1A WIRE STRAIGHTENER
$RFQ
SHUSTER Mdl# 1A WIRE STRAIGHTENER
3/16" SHUSTER 1A STRAIGHTEN AND CUT MACHINE Manufacturer: SHUSTER Model: 1A Condition: GOOD Specifications: WIRE DIAMETER RANGE 062"- 187" MAX LENGTH 7'8" SPEED 120 FPM MOTOR HP 10 EL
SLEEPER & HARTLEY Mdl# 669 WIRE SPRING COILER
$RFQ
SLEEPER & HARTLEY Mdl# 669 WIRE SPRING COILER
WIRE DIAMETER .................... .062" - .207" WIRE FEED ......................... 72" INSIDE DIAMETER ................... 1/4" - 2-3/4" 30 - 90 SPRINGS PER MINUTE FULLMDRIVEN CLUTCH
NILSON Mdl# S0 WIRE FORMER WITH REEL
$RFQ
NILSON Mdl# S0 WIRE FORMER WITH REEL
WIRE DIAMETER 1/16" MAX. FEED 6" EQUIPPED WITH; STOCK REEL ATTACHED CABINETS 1.5 HP 220/440 VOLTSD VARIABLE SPEED 1140 RPM WITH MOTOR AND CONTROLS
NILSON Mdl# S3 WIRE FORMER WITH REEL
$RFQ
NILSON Mdl# S3 WIRE FORMER WITH REEL
WIRE DIAMETER 3/16" MAX.FEED 12" EQUIPPED WITH: STOCK REEL ATTACHED CONT5OLS 5 HP 220440 VOLTS VARIABLE SPEED 1725 RPM
NILSON Mdl# S3 WIRE FORMER WITH REEL
$RFQ
NILSON Mdl# S3 WIRE FORMER WITH REEL
WIRE DIAMETER 3/16" MAX. FEED LWNGTH 12" FLOOR SPACE 61" X 78" WEIGHT 2375 LBS. EQUIPPED WITH: STOCK REEL ATTACHED CONTROLS
NILSON Mdl# S-1 4 SLIDE, WIRE FORMING MACHINE
$RFQ
NILSON Mdl# S-1 4 SLIDE, WIRE FORMING MACHINE
WIRE DIAMETER ................ 3/32" MAX FEED ..................... 8" SOLID CAMS 2 PLANE STRAIGHTENER MOUNTED CONTROLS WITH VARIDRIVE MOTOR AAND CONTROLS 5 HP 1725 1725 220/440 VOLT 3 PHASE 60 CYCLE
BEKAERT 7 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1996
$RFQ
BEKAERT 7 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1996
GENERAL LINE SPECIFICATIONS: MANUFACTURER - BEKAERT YEAR - 1996 MODEL - JUPITER C NUMBER OF BLOCKS - 7 BUILT IN ELONGATION - YES ANGLED BLOCKS - YES DIAMETER OF BLOCKS - 18" (450MM)
BEKAERT 7 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1996
$RFQ
BEKAERT 7 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1996
GENERAL LINE SPECIFICATIONS: MANUFACTURER - BEKAERT YEAR - 1996 MODEL - JUPITER C NUMBER OF BLOCKS - 7 BUILT IN ELONGATION - YES ANGLED BLOCKS - YES DIAMETER OF BLOCKS - 18" (450MM)
BEKAERT 10 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1999
$RFQ
BEKAERT 10 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1999
GENERAL LINE SPECIFICATIONS: MANUFACTURER - BEKAERT YEAR - 1999 MODEL - JUPITER C NUMBER OF BLOCKS - 10 BUILT IN ELONGATION - YES ANGLED BLOCKS - YES DIAMETER OF BLOCKS - 18" (450MM)
BEKAERT 10 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1999
$RFQ
BEKAERT 10 BLOCK WIRE DRAWING LINE INCLUDING PAYOFF AND SPOOLER, NEW 1999
GENERAL LINE SPECIFICATIONS: MANUFACTURER - BEKAERT YEAR - 1999 MODEL - JUPITER C NUMBER OF BLOCKS - 10 BUILT IN ELONGATION - YES ANGLED BLOCKS - YES DIAMETER OF BLOCKS - 18" (450MM)
WIRE LAB Mdl# 310 THREE SHEAVE MECHANICAL DESCALER W/ AIR JET CLEANER
$RFQ
WIRE LAB Mdl# 310 THREE SHEAVE MECHANICAL DESCALER W/ AIR JET CLEANER
WIRE LAB COMPANY Mdl# 310 THREE SHEAVE MECHANICAL DESCALER W/ AIR JET CLEANER
3,000 Lb. HYDRAULIC UNCOILER
$RFQ
3,000 Lb. HYDRAULIC UNCOILER
3,000 Lb. Uncoiler: Maximum Coil O.D.: 48" Maximum Coil Width: 36" Coil I.D. Range: 16" - 20" SWIVEL BASE EQUIPPED WITH: 4 KEEPERS ELECTRIC DRAG BRAKE
8" YODER/THERMATOOL API CAGE FORMING ERW TUBE MILL
$RFQ
8" YODER/THERMATOOL API CAGE FORMING ERW TUBE MILL
8" (203mm) YODER/THERMATOOL API CAGE FORMING ERW TUBE MILL THIS IS A 8" (203MM) API TUBE MILL ALONG WITH ROLLER CONVEYOR & PIPE TRANSFER TABLES TO STRAIGHTEN, END BEVEL, HYDROSTATIC TEST, NDT/ULTRASONIC
127mm (5") x 4mm Neirotti Tube Mill with Thermatool Welder OTO Cut Off
$RFQ
127mm (5") x 4mm Neirotti Tube Mill with Thermatool Welder OTO Cut Off
Manufacturer: Neirotti Italy / Thermatool USA / OTO Mills/ MAIR Research Tube Diameter Range: 42mm to 127mm Wall Thickness Range: 1.2mm to 4mm Line Direction: Right to Left Speed: 100mpm Complete Mill with the Fo
63.5mm x 4mm MTM Rafted Tube Mill Line with MAIR Packaging Line
$RFQ
63.5mm x 4mm MTM Rafted Tube Mill Line with MAIR Packaging Line
Manufacturer: MTM Italy Year: 1992 Diameter Range: 12.7mm to 63.5mm Wall thickness Range: 1.5mm to 4mm Mill Speed: 150mpm Direction: Right to Left Complete Tube Mill with the Following Components: Double End U
60.3mm (2.3") x 3mm OTO Mills Tube Mill Line with MAIR Packaging Line
$RFQ
60.3mm (2.3") x 3mm OTO Mills Tube Mill Line with MAIR Packaging Line
Manufacturer: Oto Mills Installation: 1991 Update: 2007 Tube Diameter Range: 16mm to 60.3mm Thickness Range: 0.8mm to 3mm Tube Length: 4 to 8meter Mill Speed: 130 meter/minute Direction: Left to Rigth Complete
57mm x 3.5mm MTM Rafted Tube Mill Line with MAIR Packaging Line
$RFQ
57mm x 3.5mm MTM Rafted Tube Mill Line with MAIR Packaging Line
Manufacturer: MTM Italy Year: 1990 Diameter Range: 35mm to 57mm Wall thickness Range: 1.5mm to 3.5mm Mill Speed: 150mpm Direction: Right to Left Complete Tube Mill with the Following Components: Double End Unc
1.25" x .080" Somenor Welded Tube Reducing Mill
$RFQ
1.25" x .080" Somenor Welded Tube Reducing Mill
Manufacturer: Somenor -Mill Capacity Wall Thickness Range: 0.6mm (0.023) - 2mm (0.078). Line Speed: 35 to 100 m/min. Tube O.D: 8mm (.315") - 32mm (1.25") Tube: 8 meter Shaft Diameter: 40mm (1.6")
1/2" NUTAP MAS 14 NUT TAPPER
$RFQ
1/2" NUTAP MAS 14 NUT TAPPER
1/2" Nutap Model MAS-14 Twin Spindle Nut Tapper 1/4"-1/2" Product Range ( Tap Size) 7500-15,000 PPH Hopper AC Motor and Controls
500 TON ESCO HYDRAULIC SWAGING PRESS
$RFQ
500 TON ESCO HYDRAULIC SWAGING PRESS
Machine Details: CAPACITY ........................... 500 TON OPEN ............................... 8" JAW TRAVEL ......................... 3" CLOSED ............................. 5" CENTER OF PIN TO C
7.5" (190mm) SUTTON 4KTC SEVEN ROLL TUBE STRAIGHTENER
$RFQ
7.5" (190mm) SUTTON 4KTC SEVEN ROLL TUBE STRAIGHTENER
7.5" (190mm) SUTTON 4KTC SEVEN ROLL TUBE STRAIGHTENER MANUFACTURER - SUTTON S/N - 1164 PRODUCT CAPABILITY - SEAMLESS TUBING AND CASING TUBE RANGE - 3.5"-7.5" OD (88mm-190mm) STATUS - INSTALLED IN
70" KAMPF PRECISION ALUMINUM SLITTING LINE (2001)
$RFQ
70" KAMPF PRECISION ALUMINUM SLITTING LINE (2001)
Description Year 2001 Aluminum Alloys: 1145, 1100,3003, 7072, 811 Temper: 0 - H19 Entry Strip Width: 25" - 69" (635mm - 1753mm) Line Speed: 2600 FPM (800 Met/Min) Thickness: .002" - .015" (.05mm
60" x .250" HERR VOSS TRIPLE INJECTOR HEAD SLITTING LINE W/6HI STRAND EXTENSIONE
$RFQ
60" x .250" HERR VOSS TRIPLE INJECTOR HEAD SLITTING LINE W/6HI STRAND EXTENSIONE
Thickness: .015 - .250" Yield Strength: 50,000 PSI Max Shear Strength: 50,000 PSI Max Coil Size: Width: 12 - 60" I.D.: 20- 24" O.D.: 72" Max Weight: 40,000+ Pounds Max Slitter Capacity: 2
1550mm x 6mm x 33 Ton Fagor Loop Injector Slitting Line
$RFQ
1550mm x 6mm x 33 Ton Fagor Loop Injector Slitting Line
Manufacturer: Fagor Year: 1991 Material: Hot and Cold Rolled Steel Strip width: 500 to 1550mm Thickness Range: 0.9 to 6mm Line Speed: 75 to 150m/min Total AC Power Installed: 65HP Total DC Power Installed: 460HP
MARCHANT #6FG SHRINKING & STRETCHING MACHINE
$RFQ
MARCHANT #6FG SHRINKING & STRETCHING MACHINE
Aluminum Alloy 2024 1/8" - 1 1/2" Aluminum Alloy 5052 1/8" - 1"+ Stainless Steel 3/32" FLoor to Jaws 44" Throat 6 inch Pendulum Foot Pedal Dimensions of Machine: Floor Area.........
RAS MODEL 79.26 MULTIBEND CENTER, YEAR 2000
$RFQ
RAS MODEL 79.26 MULTIBEND CENTER, YEAR 2000
RAS MODEL 79.26 MULTIBEND CENTER NEW 2000 WORKING LENGTH MAX. 2560mm (100") SHEET THICKNESS MAX. 2.0mm (14 Ga) MILD STEEL 1.5mm (16 Ga) STAINLESS STEEL 3.0mm (0.025") ALUMINUM FINISHED PART LENGT
KRB DUAL ARBOR REBAR STRAIGHT & CUT MACHINE
$RFQ
KRB DUAL ARBOR REBAR STRAIGHT & CUT MACHINE
MANUFACTURER - KRB YEAR - 2007 FPM - 360 ARBOR - DUAL BAR CAPACITY - 10MM-16MM (#3-#5 REBAR) SHEAR - HYDRAULIC FLYING RUNOUT - 40'
1 1/4" x 12', PACIFIC 1000R HYDRAULIC SHEAR
$RFQ
1 1/4" x 12', PACIFIC 1000R HYDRAULIC SHEAR
SPECIFICATIONS: NOMINAL CAPACITY (MILD STEEL) 1" X 12' MAX CAPACITY MILD STEEL 1-1/4" X 12' RAKE ANGLE 5/8"/FT DISTANCE BETWEEN HOUSINGS 12'3" KNIFE SIZE 1-3/4" X 6-1/2" POWERED BAC
6" - 16" HERTWICH ENGINEERING (SMS GROUP) BILLET SAWING SYSTEM, INSTALLED 2008
$RFQ
6" - 16" HERTWICH ENGINEERING (SMS GROUP) BILLET SAWING SYSTEM, INSTALLED 2008
6" - 16" HERTWICH ENGINEERING (SMS GROUP) BILLET SAWING SYSTEM, INSTALLED 2008 Line Technical Data Diameter of logs: minimum: 6 inches maximum: 16 inches (12" largest tested) maximum entry log le
12" x 16" DOALLL C-70 BAND SAW
$RFQ
12" x 16" DOALLL C-70 BAND SAW
Catalog Specs: Tube and or Flats: 12" x 16" Rated Capacity Rounds: 12-3/4" Rated Capacity Variable Blade Speeds: 60 to 350 FPM Blade Size:
8.5" X 2.5" X 9.5" RUESCH 4HI REVERSING MILL
$RFQ
8.5" X 2.5" X 9.5" RUESCH 4HI REVERSING MILL
Manufacturer - Ruesch Type - 4hi reversing Work roll - 2.5" x 8.5" Back up rOLL - 9.5" X 8.5" Current product - stainless steel ID/OD - 16" id/44" od
5" (127mm) x 16" (406mm) x 16" (406mm), BLISS, 4-HI REVERSING MILL
$RFQ
5" (127mm) x 16" (406mm) x 16" (406mm), BLISS, 4-HI REVERSING MILL
SPECIFICATIONS: MANUFACTURER: E.W. BLISS CO. (U.S.A.) TYPE: 4-HI COLD REVERSING MILL W/AGC WORK ROLL SIZE: 5" (127MM) DIA. 15 1/2" (394MM) FACE WORK ROLL BEARINGS: TIMKEN ROLLER BACKUP ROLL SIZE: 16�
5.5" x 8" I2S SIZING ROLLING MILL (RECONDITIONED IN 2014)
$RFQ
5.5" x 8" I2S SIZING ROLLING MILL (RECONDITIONED IN 2014)
5.5" x 8" I2S SIZING ROLLING MILL (RECONDITIONED IN 2014) Mill Type 2 Hi - Single Direction (Right to Left) Roll Diameter
16" DIA. x 19" FACE I2S ONE WAY 2HI SIZING MILL W/HYDRAULIC SCREWDOWNS, NEW 2002
$RFQ
16" DIA. x 19" FACE I2S ONE WAY 2HI SIZING MILL W/HYDRAULIC SCREWDOWNS, NEW 2002
16" DIA. x 19" FACE I2S ONE WAY 2HI SIZING MILL WITH HYDRAULIC SCREWDOWNS, NEW 2002 MANUFACTURER - INTEGRATED INDUSTRIAL SYSTEMS (I2S) YEAR - 2002 SPEED - 550 FPM ROLL FACE - 19" ROLL DIAMETER -
SUMITOMO PLATE MILL
$RFQ
SUMITOMO PLATE MILL
Located in a Building- 250 Meters X 120Meters 500,000 Tons per year Installed 2006. Shutdown 2012 Material 1800mm x 12 - 20mm finished thickness Slabs - 250mm x 1500mm x 1500mm, 4.5 ton Equipment original 1980, Rei
3/8" (9.5mm) CONTINUOUS PROPERZI WIRE ROD MILL
$RFQ
3/8" (9.5mm) CONTINUOUS PROPERZI WIRE ROD MILL
3/8" (9.5mm) CONTINUOUS PROPERZI WIRE ROD MILL Line Components: Melting Furnace Holding Furnace Inline Degassing Unit Tundish Casting Wheel - Properzir Model 7C Casting Wheel Sensor Arm Shear Pinch Roll
PRATT & WHITNEY THICKNESS GAUGES & SPARE PARTS - Mdl D, D-10 AND 10A
$RFQ
PRATT & WHITNEY THICKNESS GAUGES & SPARE PARTS - Mdl D, D-10 AND 10A
Pratt & Whitney Thickness Gauges & Spare Parts - Mdl D, D-10 and 10-A Large assortment of Pratt and Whitney thickness gauges and spare parts. Models include Model D, Model D-10, and Model 10-A. Parts include gauge
WEBB #RL3P INITIAL PLATE PINCH ROLLS
$RFQ
WEBB #RL3P INITIAL PLATE PINCH ROLLS
CAPACITY ........................ 8' X 1/4" ROLL DIAMETER .................... 8" WEIGHT ........................... 8000# O.A. DIMENSIONS ...(LRXFBXHI)..... 16' X 3'6"X4'4" EQUIPPED:
BOLDERINI Mdl# BSA-16M BAR STOCK ROLL FEED
$RFQ
BOLDERINI Mdl# BSA-16M BAR STOCK ROLL FEED
MANUFACTURER: BOLDERINI MODEL #: BSA-16M TYPE: VERTICAL 3"x3"x30" WITH TOOLING, MOTOR AND CONTROLS SKID OF DIES AND STANDS
COMPLETE SCHULER / CLEARING AUTOMATED TANDEM LINE
$RFQ
COMPLETE SCHULER / CLEARING AUTOMATED TANDEM LINE
1100 + 800 Ton Clearing Double Action Mechanical Press Pressure: 1100 + 800 Tons Daylight: 1200mm Stroke: 787mm Interior / 660mm Exterior Upper Bed Area: 2370 x 1350mm Interior / 1310-1617mm Exterior Low
800 TON DANLY Mdl# S1-800-60-54 STAMPING PRESS
$RFQ
800 TON DANLY Mdl# S1-800-60-54 STAMPING PRESS
MANUFACTURER: DANLY TONNAGE: 800 STROKE: 24" CUSHION STROKE: 12" SHUT HEIGHT: 38" ADJUSTMENT: 12" BED AREA 60" X 54" EAM AREA 60&
800 TON DANLY Mdl# S1-800-60-54 STAMPING PRESS
$RFQ
800 TON DANLY Mdl# S1-800-60-54 STAMPING PRESS
MANUFACTURER: DANLY TONNAGE: 800 STROKE: 24" CUSHION STROKE: 12" SHUT HEIGHT: 38" ADJUSTMENT: 12" BED AREA 60" X 54" RAM ATEA 60&
BLISS Mdl# C35 OBI SINGLE CRANK FLYWHEEL PRESS
$RFQ
BLISS Mdl# C35 OBI SINGLE CRANK FLYWHEEL PRESS
BLISS CUT-OFF PRESS CAPACITY: 35 TON STROKE: 3" BED AREA: 24" L-R, 17" F-B SHUT HEIGHT: 11" MOTOR 5HP, 550V
100 Ton WARCO Mdl# SC1-100-20-20H STRAIGHT SIDE SINGLE CRANK PRESS
$RFQ
100 Ton WARCO Mdl# SC1-100-20-20H STRAIGHT SIDE SINGLE CRANK PRESS
RATED CAPACITY .................. 100 TONS STROKE OF SLIDE ................. 1-1/2" STROKES PER MINUTE .............. 100 TO 300 ADJUSTMENT ...................... 3" SHUTHEIGHT S.D.A.U. ............. 12
100 TON WILKINS & MITCHELL HOT FORGING PRESS
$RFQ
100 TON WILKINS & MITCHELL HOT FORGING PRESS
REBUILT AND RETROFIT 2017 TO HOT FORGE BOLT Tonnage us ton 125 Capacity m42 dia Length 800 Stroke 8" Spm 45 Shut height 24" Bed area 30( front to back) 40" ( left to right) SEE YOUTUBE VI
WAFIOS Mdl# N4 HIGH SPEED NAIL MAKING MACHINE
$RFQ
WAFIOS Mdl# N4 HIGH SPEED NAIL MAKING MACHINE
One Used Wafios Model N4 High Speed Nail Header Serial Number E2407761 .070"-.122" Wire Diameter Range .511"-2.952" Nail Length Range 550 Pieces per Minute 2 Plane Straightener AC Motor an
60" x 60" x 144" ROCKFORD PLANER MILL
$RFQ
60" x 60" x 144" ROCKFORD PLANER MILL
SPECIFICATIONS HEIGHT UNDER RAIL .................... 60" DISTANCE BETWEEN COLUMNS ............. 60" TABLE STROKE ......................... 144" TABLE DIMENSION ...................... 48" X 140�
TOKO 5 DIE PROGRESSIVE HEADER, REBUILT 2001
$RFQ
TOKO 5 DIE PROGRESSIVE HEADER, REBUILT 2001
One Used 5 Die TOKO Model TPF-105F Progressive Cold Header, Serial No 001818 Built New 1990 Rebuilt 2001 10mm Cutoff Diameter 60mm Die Kickout Max. 70mm Cutoff Length 180 Pieces per Minute Equipped with: IFO
3/16" NATIONAL 4 DIE BOLT MAKING MACHINE
$RFQ
3/16" NATIONAL 4 DIE BOLT MAKING MACHINE
One Used 3/16" 4 Die National Progressive Cold Header 3/16" Maximum Cutoff Diameter 1 1/2" Maximum Shank Length 2 1/4" Maximum Cutoff Length No Trimming, Pointing or Threading 110 Pieces
3/16" NATIONAL 4 DIE BOLT PROGRESSIVE HEADER
$RFQ
3/16" NATIONAL 4 DIE BOLT PROGRESSIVE HEADER
One Used 3/16" 4 Die National Progressive Header Serial No 23686 Built new 1956 3/16" Maximum Cutoff Diameter 1 1/2" Maximum Shank Length 2 1/4" Maximum Cutoff Length 110 Pieces per Minute
3/16" NATIONAL 4 DIE PROGRESSIVE HEADER
$RFQ
3/16" NATIONAL 4 DIE PROGRESSIVE HEADER
One Used 3/16" 4 Die National Progressive Header Serial No 27072 Built New 1964 3/16" Maximum Cutoff Diameter 1 1/2" Maximum Shank Length 2 1/4" Maximum Cutoff Length 110 Pieces per Minute
NATIONAL FORMAX Mdl# FX54M PROGRESSIVE DIE HEADER
$RFQ
NATIONAL FORMAX Mdl# FX54M PROGRESSIVE DIE HEADER
One Used National Formax Model FX54M 4 Die High Speed Cold Former, Serial No 20907 Built New 1991 17.7mm Cutoff Diameter @ 85,000PSI 12-108mm Min/Max Kickout Stroke 15-148 Min/Max Cutoff Length 190 Pieces per
NATIONAL M# M12LS LONG STROKE DSSD COLD HEADER
$RFQ
NATIONAL M# M12LS LONG STROKE DSSD COLD HEADER
NATIONAL Mdl# M12 LONG STROKE, DSSD COLD HEADER 12mm CUT OFF CAPACITY @ 85,000 PSI 100mm MAX CAPACITY UNDER HEAD 130mm MAX BLANK 20mm MIN BLANK 125 PPM O.A. DIMENSIONS: 1.68M X 4.3M W x L APPROX. WEIGHT: 12,
16" (406mm) COIL TO COIL HORIZONTAL BRIGHT ANNEAL FOR STAINLESS STRIP
$RFQ
16" (406mm) COIL TO COIL HORIZONTAL BRIGHT ANNEAL FOR STAINLESS STRIP
SPECIFICATIONS: PURPOSE: COIL TO COIL HORIZONTAL FURNACE TO BRIGHT ANNEAL STAINLESS STEEL STRIP IN A CONTROLLED HYDROGEN/NITROGEN ATMOSPHERE USING A WEB LOOP TENSION CONTROL SYSTEM TO PREVENT STRETCHING AND SHAP
57"W., 16"H., 57"L., RIPOCHE, ROLLER HEARTH ANNEALING FURNACE, 3 ZONE
$RFQ
57"W., 16"H., 57"L., RIPOCHE, ROLLER HEARTH ANNEALING FURNACE, 3 ZONE
Manufacturer: ...................... Ripoche; France Year of Manufacture: ............... 1995 Fuel: .............................. Natural Gas Type of atmosphere: ................ H2N2 Number of Zones: .............
72" x 0.500" x 60,000# Delta Cut To Length Line
$RFQ
72" x 0.500" x 60,000# Delta Cut To Length Line
MATERIALS: HR STEEL MAX. SHEAR: 65,000 PSI MAX. YIELD: 65,000 PSI THICKNESS RANGE: 0.125" - 0.550" MAX. COIL WEIGHT: 60,000# COIL WIDTH RANGE: 36"
80mm Adige Re Cut Machine 2003
$RFQ
80mm Adige Re Cut Machine 2003
Manufacturer: Adige Italy Year: 2003 Round Min. Diameter: 12mm Round Max. Diameter: 80mm Square Range: 10mm x 10mm / 70mm x 70mm Rectangular: 15mm x 10mm / 80mm x 70mm Min Solid Bars: 12mm Max Solid Bars: 30mm
LATE MODEL COMPLETE COPPER & BRASS ROLLING AND CASTING FACILITIES
$RFQ
LATE MODEL COMPLETE COPPER & BRASS ROLLING AND CASTING FACILITIES
Late Model Complete Copper & Brass Rolling and Casting Facilities. 28 Million lbs Annual Casting Capacity 20 Million lbs Finished Product Capacity Rolling Plant Casting Plant 3 Rolling Mills
40,000# WINKLE INDUSTRIES COIL ID GRAB
$RFQ
40,000# WINKLE INDUSTRIES COIL ID GRAB
40,000# WINKLE INDUSTRIES COIL ID GRAB MFG - WINKLE INDUSTRIES YEAR - 2011 S/N - MD140 CAPACITY - 40 TON WEIGHT - 7,250 LBS
72" x 10,000# BRANER COIL BANDING LINE W/ TURRET STACKER
$RFQ
72" x 10,000# BRANER COIL BANDING LINE W/ TURRET STACKER
Max Coil OD: 72" Max Coil Weight: 10,000# Complete Line With: 50,000# Entry Turnstile 4 Arms Hydraulic Push-Off Power Rotation Horn Type Downlayer End Discharge 72" Roll Face 79" Table Wi
60 TON CHICAGO -DREIS & KRUMP- MECHANICAL PRESS BRAKE
$RFQ
60 TON CHICAGO -DREIS & KRUMP- MECHANICAL PRESS BRAKE
CHICAGO -DREIS & KRUMP- PRE PUNCH MECHANICAL PRESS BRAKE INLINE SLIDING ROLLER BED CAPACITY: 60 TON FLANGE SIZE: 12" X 76" BETWEEN HOUSINGS: 76" BED AREA: 9" L-R, 12"
12' x 100 TON NIAGARA Mdl# HD100-8-10 HYDRAULIC BRAKE
$RFQ
12' x 100 TON NIAGARA Mdl# HD100-8-10 HYDRAULIC BRAKE
HD100-8-10 NIAGARA 12' (with 2' Horn) X 100 Ton Hyd Brake S/N 51101 W/Hurco AutoBend 5C 2-Axis CNC Back Gauge with Manual Vert Adj, 7" Stroke, 7" Closed Height, 14" Open Height, 102" BH, 8
3/6" X 9' PACIFIC Mdl# J110-10 PRESS BRAKE
$RFQ
3/6" X 9' PACIFIC Mdl# J110-10 PRESS BRAKE
MODEL ....... J110-10 MAX CAP...... 3/16" X 9' PUNCHING .... 73 MAX RAM ..... .50 TONS
LUBOW Mdl# 10 BAR BENDER FOR ROUND, SQUARE AND RECTANGLE
$RFQ
LUBOW Mdl# 10 BAR BENDER FOR ROUND, SQUARE AND RECTANGLE
MANUFACTURER....... LUBOW MODEL ............. M10 FOR RROUND, SQUARE AND RECTANGLE STOCK. WITH BENDING DIES PNEUMATIC FOOT PEDAL CONTROLS
SCHUMAG No. KZRP-0B COMBINED DRAWING MACHINE SCHUMAG
$RFQ
SCHUMAG No. KZRP-0B COMBINED DRAWING MACHINE SCHUMAG
Manufacturer: SCHUMAG Ag, AACHEN, GERMANY Year of manufacture: 1974 - Overhauled on 2015 Model: KZRP-0B Range: -Rounds: Dia. 2- 10mm. Drawing Force: 2 Tons. Bars Length: 2 -4 mt. Speed: 20 -40 -60 mt./min.
SCHUMAG No. KZ-RP 0B COMBINED DRAWING MACHINE
$RFQ
SCHUMAG No. KZ-RP 0B COMBINED DRAWING MACHINE
Type: KZ - RP 0B Manufacturer: Schumag Range: Round Dia. 2 mm - O8 mm Tube Dia. 2 mm - O16 mm Square 7 mm max. Hexagon 8 mm max. Pull Force: 2 ton Speed : 100 m/1' Line composed of: Horizontal and Vertica
Nilson S3F Fourslide
$RFQ
Nilson S3F Fourslide
No description providedWire Diameter3/16" Maximum Strip Width2" Standard Feed Length15" Strokes Per Minute32 - 130 Tonnage20 Forming Bed Opening8-1/2" x 6-1/2" Motor3 HP Approx. Floor Space72" x 110" Approx. Weight5,000
18" x 5,000Lb Cooper Double - End Uncoiler
$RFQ
18" x 5,000Lb Cooper Double - End Uncoiler
Material Width: 18″, Weight Capacity: 5,000Lb, Coil ID: 18″-22″, Coil OD: 60″, Water Cooled Brake, Powered Rotation
  • Maximum weight capacity: 5000Lb
  • Maximum coil width: 18"
    18" x 5,000Lb Cooper Double - End Uncoiler
    $RFQ
    18" x 5,000Lb Cooper Double - End Uncoiler
    Material Width: 18″, Weight Capacity: 5,000Lb, Coil ID: 18″-22″, Coil OD: 60″, Manual Expansion & Rotation
    • Maximum weight capacity: 5000Lb
    • Maximum coil width: 18"
      12" x 5,000Lb Littell Double - End Uncoiler
      $RFQ
      12" x 5,000Lb Littell Double - End Uncoiler
      Material Width: 12″, Weight: 5,000Lb, Powered Mandrel Expansion, Powered Rotation, Pneumatic Brake
      • Maximum weight capacity: 5000Lb
      • Maximum coil width: 12"
        1991 ZERBST DP3-139” COMPONENT STYLE MANUAL LATHE, 139” SWING
        $RFQ
        1991 ZERBST DP3-139” COMPONENT STYLE MANUAL LATHE, 139” SWING
        SPECIFICATIONS FEATURES COMPONENT STYLE LATHE WITH DISPLACEABLE HEADSTOCK & TAILSTOCK TO ALLOW EXTENDED CENTER DISTANCES CAPACITIES FACE PLATE DIAMETER: 139.76” MAXIMUM SWING (AS CURRENTLY INSTALLED): 98.63”
        • Swing: 139"
          AMADA RG-80S CNC HYDRAULIC PRESS BRAKE
          $RFQ
          AMADA RG-80S CNC HYDRAULIC PRESS BRAKE
          AMADA RG-80S CNC HYDRAULIC PRESS BRAKE MODEL RG-80S MANUFACTURED 1987 RACO Stock Number R018350 TONNAGE -------------------------------------- 88 TONS OVERALL LENGTH ----------------------------- 79" DISTANC
          • Tonnage: 88T
            1967 MEUSER MODEL M3L GAP BED ENGINE LATHE, 28" X 120"
            $RFQ
            1967 MEUSER MODEL M3L GAP BED ENGINE LATHE, 28" X 120"
            CAPACITY SWING OVER BED: 28” SWING OVER CROSS SLIDE: 20” WIDTH OF BED: 16-1/2” CENTER DISTANCE: 120” SWING IN GAP: 40” WIDTH OF GAP IN FRONT OF FACEPLATE: 10” WIDTH OF GAP: 15” HEADSTOCK SPINDLE NOSE: D1-8 HO
            • Swing: 28"
            • Centers: 120"
              LNS HYDRO BAR FEED
              $950
              LNS HYDRO BAR FEED
              (2) TWO 12' LNS HYDRO BAR FEED 1/4" DIAMETER TO 1-5/8"
              • Maximum bar diameter: 1.625"
              • Maximum bar length: 12'
                BIG REP ONE V3 NEW LARGE SCALE FFF 3D PRINTER
                $RFQ
                BIG REP ONE V3 NEW LARGE SCALE FFF 3D PRINTER
                BIG REP ONE V3 NEW LARGE SCALE FFF 3D PRINTER MANUFACTURED STOCK# 71519 BIG REP ONE V3 IS THE RECIPIENT OF THE 2016 GERMAN DESIGN AWARD. TO ACHIEVE THE BEST POSSIBLE CONDITIONS FOR PRINTING LARGE OBJECTS, A
                Haas HRT 210 Used Indexer with Haas Servo Control
                $4,500
                Haas HRT 210 Used Indexer with Haas Servo Control
                Tested for function and backlash Haas Servo Control included Check Out YouTube Video attached This price includes freight shipping to anywhere in the United States. Email [email protected] for any questions!
                Wire Bending Bench
                $RFQ
                Wire Bending Bench
                No description provided
                Clausing Model 2233 Single Spindle Drill,
                $RFQ
                Clausing Model 2233 Single Spindle Drill,
                No. Spindles 1, Manufacturer Clausing, Model No. 2233, Serial No. 109956, Year Mfg. , Type (Gang/Cluster) Single Spindle, Throat Depth 20", Table Size 24" x 40" Heavy Duty Plain Production Base Portable On
                • # Spindles: #1
                  Clausing Model 2287 20" Two Spindle Gang Drill,
                  $RFQ
                  Clausing Model 2287 20" Two Spindle Gang Drill,
                  No. Spindles 2, Manufacturer Clausing, Model No. 2287, Serial No. 20 532866 (Left Spindle), Year Mfg. , Type (Gang/Cluster) Gang, Throat Depth 20", Table Size 24" x 42" T Slotted Clausing Base, Taper In Sp
                  • # Spindles: #2
                    Enshu EV650 Vertical Machining Center
                    $RFQ
                    Enshu EV650 Vertical Machining Center
                    X Axis Travel 63", Y Axis Travel 25.6", Z Axis Travel 26", Manufacturer Enshu CNC Vert. Machining Center, Model No. EV650, Serial No. 1266, Year Mfg. 1998, Control Yasnac "Enac", Table Size 25&qu
                    • X axis: 63"
                    • Y axis: 25.6"
                      Daewoo Mod. 250 LB CNC Lathe
                      $RFQ
                      Daewoo Mod. 250 LB CNC Lathe
                      Chuck Size 12", Manufacturer Daewoo CNC Lathe, Model No. 250LB, , Year Mfg. 2000, Control Mitsubishi Meldas, Swing 22.4" Over Bed, 14" Over Carriage, Max. Turning Dia.: 15.7", Max Center Distance 56&
                      • Swing: 22.4"
                      • Centers: 56"
                        LNS Hydrobar Bar Feed
                        $RFQ
                        LNS Hydrobar Bar Feed
                        Bar Capacity Range 1/4" to 1 1/4", Manufacturer LNS, Model No. Type 6.32 HS-5.2, Serial No. Nu. Fab 27.230, Year Mfg. , "Type ( Mech., Hydrostatic, Hydrodynamic)" Hydrostatic, "Style ( Single Tu
                        • Maximum bar diameter: 1.25"
                        • Maximum bar length: 12'
                          *NEW* 110 Ton x 8.53' Ermak Power Bend Falcon CNC Press Brake
                          $RFQ
                          *NEW* 110 Ton x 8.53' Ermak Power Bend Falcon CNC Press Brake
                          Specifications Capacity 110 Tons Overall Bending Length 102" Distance Between Columns 86.6" Throat 16.1" Daylight 20.9" Stroke 10.8" Approach Speed 7.87 IPS Bending Speed .37 IPS Retur
                          • Tonnage: 110T
                            NTC ZH4000 Horz Mach Center, (2) 15.7" Pallets
                            $RFQ
                            NTC ZH4000 Horz Mach Center, (2) 15.7" Pallets
                            X Axis Travel 25", Y Axis Travel 22", Z Axis Travel 22", Pallet Rotation Full 4th Axis, Manufacturer NTC CNC Horz. Machining Center, Model No. ZH4000, , Year Mfg. 2007, Control Fanuc 32i, No. of Pallets 2
                            • X axis: 25"
                            • Y axis: 22"
                              Okuma Mod. MCM B Bridge Type CNC Vert Machining Center
                              $RFQ
                              Okuma Mod. MCM B Bridge Type CNC Vert Machining Center
                              Okuma Mod. MCM B Bridge Type CNC Vert Machining Center, 197" x 106" x 32" XYZ, Horz. Spindle, OSP 7000M, 1998
                              • X axis: 197"
                              • Y axis: 106"
                                South Bend Model A 10" x 24" Lathe
                                $RFQ
                                South Bend Model A 10" x 24" Lathe
                                South Bend Model A 10" x 24" Lathe
                                Ideal DS3 Butt Welder
                                $RFQ
                                Ideal DS3 Butt Welder
                                No description providedWire Diameter0.5 - 3.0mm (Steel) Wire Diameter0.6mm - 2.5mm (Copper) Wire Diameter0.8mm - 3.0mm (Aluminum & Brass Wire) Annealing Jaws<br
                                Johnford DMC 1200H CNC Vertical Machining Center
                                $RFQ
                                Johnford DMC 1200H CNC Vertical Machining Center
                                Johnford DMC 1200H, 47" X 35" X 30", Fanuc 18M, 24 ATC, 50 Taper, 6,000 RPM, 2001,
                                • X axis: 47"
                                • Y axis: 35"
                                  year 2000 Northwood CNC Router
                                  $29,500
                                  year 2000 Northwood CNC Router
                                  Northwood CNC Router , Fanuc 21i-M, Model NW 255, 2 - 18-24K Spindles, 2 Toolchangers, 2 5' independent tables, 40HP Vacuum Pump, 2000,
                                  BYSTRONIC MODEL BEYELER PR6 100X3100 110 TON 6 AXIS CNC PRESS BRAKE
                                  $RFQ
                                  BYSTRONIC MODEL BEYELER PR6 100X3100 110 TON 6 AXIS CNC PRESS BRAKE
                                  BYSTRONIC MODEL BEYELER PR6 100X3100 110 TON 6 AXIS CNC PRESS BRAKE MANUFACTURED 2003 RACO Stock Number R018347 MAXIMUM TONNAGE CAPACITY -------------------- 110 TON OVERALL LENGTH OF BED & RAM ----------------
                                  • Tonnage: 110T
                                    Synchro BS-12B2 Paper Clip Machine
                                    $RFQ
                                    Synchro BS-12B2 Paper Clip Machine
                                    No description provided
                                    Granite Square Surface Plate
                                    $RFQ
                                    Granite Square Surface Plate
                                    No description provided
                                    Economy Model 5200 Double End Pointing Machine
                                    $RFQ
                                    Economy Model 5200 Double End Pointing Machine
                                    No description providedMaximum Part Diameter1-1/2" Diameter Tooling2-1/4" Work Length1-1/2" - 48" Production Rate3600 PPH Electrics10 HP Approx. Weight6,500 lbs Approx. Floor Size4' x 8'
                                    Conveyor
                                    $RFQ
                                    Conveyor
                                    Rubber Belt
                                    Categories:
                                    Condition:
                                    Manufacturer:
                                    Location:
                                    Price:
                                    •  to 
                                    <Prev | 111 | 112 | 113 | 114 | 115 | 116 | 117 | 118 | 119 | 120 | Next>