buy & sell, new & used machinery, machine tools & equipment

Construction Equipment

Construction Equipment For Sale

608 new & used construction equipment items for sale
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 351 - 400 of 608 matches
Sort by:
Items Per Page:  20 |  50  |  100
2008 John Deere 160D LC Excavator
$67,000
2008 John Deere 160D LC Excavator
4 CYL JD ENGINE, 28 IN PADS, 41 IN BUCKET, MANUAL THUMB, ENCLOSED CAB W/ A/C & HEAT, 8754 HOURS SHOWING- NEW OUTER STICK CYLINDER, MAIN BUCKET PIN LINE BORED, REFACED, NEW BUSHINGS AND PIN, NEW MUFFLER.
2013 Hamm 3410P Roller- E6303
$64,500
2013 Hamm 3410P Roller- E6303
4 CYL DEUTZ ENGINE, 84 IN PADFOOT DRUM, DRUM DRIVE, 2 SPEED HIGH/LOW VIBRATION, 23.1-26 TIRES, 1425 HOURS SHOWING
2013 Caterpillar D5K2 LGP Dozer
$74,500
2013 Caterpillar D5K2 LGP Dozer
4 CYL CAT ENGINE, 3 SPD TRANS W/ JOYSTICK STEERING, 26 IN PADS, 6-WAY BLADE (10 FT 6 IN), HEAT, 2784 HOURS SHOWING
2005 VERMEER T455
$65,000
2005 VERMEER T455
S/N: 1VRK120B2Y1000302, 1011 HOURS, 125 HP, BOOM LENGTHENED, WILL CUT BOOM TO ANY LENGTH AT NO COST, REGULAR MAINTENANCE, EXTRA TEETH INCLUDED RUNS GREAT!
2017 Laymor SM400 Broom
$49,500
2017 Laymor SM400 Broom
4 CYL KUBOTA ENGINE, ENCLOSED CAB W/ A/C & HEAT- BRAND NEW
2012 CATERPILLAR D5K XL DOZER
$72,500
2012 CATERPILLAR D5K XL DOZER
4 CYL CAT ENGINE, 3 SPD TRANS W/ JOYSTICK STEERING, 20 IN PADS, 6-WAY BLADE (9 FT 3 IN WIDE), SWEEPS, ENCLOSED CAB W/ A/C & HEAT, 5770 HRS SHOWING
2011 WACKER RTSC2 TRENCH ROLLER
$12,500
2011 WACKER RTSC2 TRENCH ROLLER
3 CYL KOHLER ENGINE, HYDRO-STATIC TRANS, 34 IN PADFOOT DRUMS, DRUM DRIVE, HIGH/LOW VIBRATION, REMOTE CONTROL - MACHINE IS LOCATED IN LELAND, NC AT OUR RENTAL LOT - MACHINE MAY HAVE BEEN RENTED OUT SINCE PICTURES WERE TAK
2013 JOHN DEERE 700K LGP DOZER
$84,000
2013 JOHN DEERE 700K LGP DOZER
6 CYL JD ENGINE, HYDRO-STATIC TRANS W/ JOYSTICK STEERING, 30 IN PADS, 6-WAY BLADE (10 FT 11 IN WIDE), ENCLOSED CAB W/ A/C & HEAT, 5898 HOURS SHOWING
2011 WACKER NEUSON RTSC2 TRENCH ROLLER
$12,500
2011 WACKER NEUSON RTSC2 TRENCH ROLLER
3 CYL KOHLER ENGINE, REMOTE HYDRO-STATIC CONTROL, DUAL 32 IN SMOOTH DRUMS, DRUM DRIVE, HIGH/LOW VIBRATION, REMOTE CONTROLS, 476 HRS SHOWING - MACHINE IS LOCATED IN LELAND, NC AT OUR RENTAL LOT - MACHINE MAY HAVE BEEN REN
2013 BOMAG BW211PD-40 ROLLER
$63,500
2013 BOMAG BW211PD-40 ROLLER
4 CYL DEUTZ ENGINE, HYDRO-STATIC TRANS, 84 IN PADFOOT DRUM, DRUM DRIVE, HIGH/LOW VIBRATION, 23.1-26 TIRES, OROPS, 2995 HRS SHOWING
Terex Biogrind 260
$1
Terex Biogrind 260
Horizontal wood grinder, hydraulic folding discharge conveyor, hopper, screens, magnetic pulley and remote control Excellent Condition 500 hours Cummins 8.3L 300HP
Kolman single deck screening plant
$15,000
Kolman single deck screening plant
Kolman single deck screening plant, including feed hopper and oversize grizzly. 4 cylinder Gasoline Ford industrial engine. W/hydraulic pump for material conveyor. Model 202, serial # 70113-45-24
FINLAY 2 deck screening plant 3'х8' screen deck
$25,000
FINLAY 2 deck screening plant 3'х8' screen deck
FINLAY 2 deck screening plant 3'х8' screen deck W/harp deck screen #7H serial #0213, feed hopper including. Factory rebuilt Lister diesel power 3 cylinder 180 hours.
Cincinnati Hydraulic Shear 250 HS x 10 (1986)
$RFQ
Cincinnati Hydraulic Shear 250 HS x 10 (1986)
Specifications: Capcity (Mild Steel) 1/4" Max. cutting Length
AFM CHGS/9-70128-T Hydraulic Shear (1995)
$RFQ
AFM CHGS/9-70128-T Hydraulic Shear (1995)
Specifications: Capacity (Mild Steel) 1/4" Max. Cutting Length
Amada MP-1012 Loader
$RFQ
Amada MP-1012 Loader
SPECIFICATIONS: MODEL: MP-1012 LOADER 40" X 50" SHEET SIZE
Bystronic BYSMALL 2512-2 LASER
$RFQ
Bystronic BYSMALL 2512-2 LASER
SPECIFICATIONS: MODEL: BYSMALL 2512-2 YEAR: 1994 RESONATOR WATTAGE: 1500 MAXIMUM SHEET SIZE: 4X8 DUST COLLECTOR LOADER UNDER POWER
Cat 247B track skid loader
$23,675
Cat 247B track skid loader
Here is a 2005 track machine with low 1446 hrs , has like new tracks and the overall machine is in really good condition please contact Joe at 330-473-8955 for more info
Aba Starline Horizontal Surface Grinder
$RFQ
Aba Starline Horizontal Surface Grinder
Category Grinders – Horizontal Surface Manufacturer Aba Starline Model 500 CNC 4 Axis Surface and Profile Grinding Machine Serial Number 26 CD 362 N Year 2003 X - Maximum Grinding Length 23.62 in 600.00 mm Y - Maxi
Thompson Horizontal Surface Grinder
$RFQ
Thompson Horizontal Surface Grinder
Category Grinders – Horizontal Surface Manufacturer Thompson Model 2FE732985 Serial Number 100782 Year 1960s Maximum Wheel OD 12.00 in 304.00 mm Wheel Width 4.00 in 102.00 mm Wheel Spindle Speed 1150 RPM Wheel Sp
Gallmeyer & Livingston Grand Rapids
$RFQ
Gallmeyer & Livingston Grand Rapids
Category Grinders – Horizontal Surface Manufacturer Gallmeyer & Livingston Model Grand Rapids 450 Serial Number 450140 Year 1969 Z – Maximum Work Height 23.00 in 584.00 mm Maximum Wheel OD 14.00 in 356.00 mm W
2013 CATERPILLAR 305E CR MINI EXCAVATOR
$51,500
2013 CATERPILLAR 305E CR MINI EXCAVATOR
4 CYL CAT ENGINE, 16 IN RUBBER TRACKS, 13 IN BUCKET, 6 FT 6 IN BLADE, HYDRAULIC THUMB, ENCLOSED CAB W/ A/C & HEAT, 1334 HRS SHOWING - MACHINE IS LOCATED IN LELAND, NC AT OUR RENTAL LOT - MACHINE MAY HAVE BEEN RENTED
STONE, Wolfpac 4100
$10,000
STONE, Wolfpac 4100
2006 Stone Wolfpac 4100, 684 hrs. 2-4 ton, Isuzu Diesel, double drum vibratory, new paint, new decals, new water pump, new scraper blades, runs and operates like new for half the cost of a new machine.
2012 CATERPILLAR D5K2 LGP DOZER
$83,000
2012 CATERPILLAR D5K2 LGP DOZER
4 CYL CAT ENGINE, HY-STAT TRANS W/ JOYSTICK STEERING, 26 IN PADS, 6-WAY BLADE (10 FT 5 IN WIDE), ENCLOSED CAB W/ A/C & HEAT, 4945 HRS - MACHINE IS LOCATED IN LELAND, NC AT OUR RENTAL LOT - MACHINE MAY HAVE BEEN RENTE
Fillet Roller Hypneumat
$RFQ
Fillet Roller Hypneumat
2 Head
Cincinnati 4FL20 Hydraulic Shear
$RFQ
Cincinnati 4FL20 Hydraulic Shear
SPECIFICATIONS: MODEL: 4FL20 YEAR: 1974 SERIAL: 11547 SPECIFICATIONS: CUTTING CAPACITY AT NOMINAL RAKE - MILD STEEL: 20' X 1/2" CUTTING CAPACITY AT INCREASED RAKE - MILD STEEL: 20' X 5/8'; 10' X 3/4" DISTANCE BETWEEN H
2011 CATERPILLAR D6N LGP DOZER
$110,500
2011 CATERPILLAR D6N LGP DOZER
6 CYL CAT ENGINE, HYDRO-STATIC TRANS W/ JOYSTICK STEERING, 34 IN PADS, 6-WAY BLADE (13 FT WIDE), ENCLOSED CAB W/ A/C & HEAT, 4672 HRS SHOWING - MACHINE LOCATED IN LELAND, NC AT OUR RENTAL LOT - MACHINE MAY HAVE BEEN
Cincinnati 1" x 12' Hydraulic Plate Shear 8SE12
$72,500
Cincinnati 1" x 12' Hydraulic Plate Shear 8SE12
Series 8SE12 Serial: 44036 1984 Capacity: 1" x 12' 36" Gap Ball Top Table Pedestal Style Operator Control Center VERY GOOD CONDITION! Price is for shear only. All accessories in pictures are avail
16"Bar 6.4 HP 9300 RPM, ICS, Concrete Chain Saw,9300 +/-150rpm,2Stroke, single Nevins
$RFQ
16"Bar 6.4 HP 9300 RPM, ICS, Concrete Chain Saw,9300 +/-150rpm,2Stroke, single Nevins
swpc(1,"http://uen.hsix.com/machpict/013510/570000.jpg")
14"Bar 5 HP 11500 RPM, ICS, Concrete chian saw,+/-500rpm max,2 Stroke, 1 cyl,(br Nevi
$RFQ
14"Bar 5 HP 11500 RPM, ICS, Concrete chian saw,+/-500rpm max,2 Stroke, 1 cyl,(br Nevi
BRAND NEW ICS CONCRETE CHAIN SAW MODEL 680GC #570001 680GC PRODUCT SPECIFICATIONS
2002 CAT CS563D 84 INCH. SMOOTH DRUM COMPACTOR, 9MW01093 2423 HRS
$49,000
2002 CAT CS563D 84 INCH. SMOOTH DRUM COMPACTOR, 9MW01093 2423 HRS
VERY GOOD CONDITION , READY FOR WORK
2001 Kenworth W900L Long Log Truck
$75,000
2001 Kenworth W900L Long Log Truck
2001 Kenworth W900L Long Log Truck, 785935 mi, 550HP C15 Cat, 18 spd, 12K Fronts, 40K Rears, 230WB, New Rear Ends w/Full Lockers and NEW 2014 Alpine Trailer and Truck Rigging. Vulcan scales w/remote. NEW rubber. Inclu
BAILEIGH Sheet Metal Shear SH-12014
$RFQ
BAILEIGH Sheet Metal Shear SH-12014
CALL FOR BEST PRICING! FEATURES: Baileigh Industrial’s hydraulic sheet metal shears offer rigid and simple designs for decades of service. The Baileigh Industrial SH-12014 sheet metal shearing machine comes stand
BAILEIGH Sheet Metal Shear SH-12010
$RFQ
BAILEIGH Sheet Metal Shear SH-12010
CALL 386-304-3720 FOR AVAILABILITY FEATURES: Need to shear extremely long lengths of 10 gauge mild steel? Then the Baileigh Industrial SH-12010 hydraulic shear should be your next choice. The SH-12010 features a
BAILEIGH Three Phase Heavy Duty Hydraulic Shear SH-120500-HD
$RFQ
BAILEIGH Three Phase Heavy Duty Hydraulic Shear SH-120500-HD
CALL FOR BEST PRICING! FEATURES: When cutting 1/2” mild steel plate, you need a machine that is built to last and perform day in any day out. The SH-120500-HD is just that machine. This massive machine weighs in
BAILEIGH Sheet Metal Shear SH-12003-HD
$RFQ
BAILEIGH Sheet Metal Shear SH-12003-HD
CALL FOR BEST PRICING! FEATURES: Looking for the most reliable1/4” mild steel hydraulic shear on the market? You found it. With a Schneider NC controller and a steel plate frame, this shear was built for heavy pr
BAILEIGH Compact Hydraulic Shear SH-8014
$RFQ
BAILEIGH Compact Hydraulic Shear SH-8014
CALL FOR BEST PRICING! FEATURES: The SH-8014 hydraulic shear from Baileigh industrial is a great shear for those fabrication shops that mainly work with smaller gauge sheet metal. The SH-8014 metal shear from Baileig
BAILEIGH Heavy Duty Hydraulic Sheet Metal Shear SH-8010-HD
$RFQ
BAILEIGH Heavy Duty Hydraulic Sheet Metal Shear SH-8010-HD
CALL FOR BEST PRICING! FEATURES: Have a lot of production to do and like the idea of a heavy duty shear that can take anything you can throw at it? Then the Sh-8010-HD might just be the shear for you. Running on
BAILEIGH Compact Shear SH-8010
$RFQ
BAILEIGH Compact Shear SH-8010
CALL FOR BEST PRICING! FEATURES: Baileigh Industrial’s SH-8010 compact shear has an 80" wide cutting capacity to accommodate most sheet metal applications and is the perfect metal shear for any fabrication shop
BAILEIGH Heavy Duty Hydraulic Metal Shear SH-8008-HD
$RFQ
BAILEIGH Heavy Duty Hydraulic Metal Shear SH-8008-HD
CALL FOR BEST PRICING! FEATURES: If you want ease of use, fast production, and money saving out of you next shear, then look no further that than the SH-8008-HD hydraulic metal shear from Baileigh Industrial. At
BAILEIGH SH-10010 Hydraulic Metal Shear
$RFQ
BAILEIGH SH-10010 Hydraulic Metal Shear
CALL FOR BEST PRICING! FEATURES: Looking to shear 8’ sheets of metal without trimming? Then the Baileigh Industrial SH-10010 hydraulic metal shear is perfect for your shop. The SH-10010 features a 100" wide cutt
BAILEIGH Hydraulic Metal Shear SH-6014
$RFQ
BAILEIGH Hydraulic Metal Shear SH-6014
CALL FOR BEST PRICING! FEATURES: At a blistering 30 strokes a minute for 14 gauge mild steel the SH-6014 will save you time and money on your next metal shearing project. The SH-6014 metal shear uses 60" blades
BAILEIGH Compact Metal Shear SH-6010
$RFQ
BAILEIGH Compact Metal Shear SH-6010
CALL FOR BEST PRICING! FEATURES: The SH-6010 hydraulic shear is the perfect machine for any fabrication or sheet metal shop. It features a 60" wide cutting capacity and is capable of smoothly shearing through 10
BAILEIGH Heavy Duty Hydraulic Shear SH-70250-HD
$RFQ
BAILEIGH Heavy Duty Hydraulic Shear SH-70250-HD
CALL FOR BEST PRICING! FEATURES: The SH-70250-HD from Baileigh Industrial is a hydraulic shear that cuts 1/4” mild steel over its entire 96” length. The frame of the SH-70250-HD is all integrated and fully welded
BAILEIGH Hydraulic Sheet Metal Shear SH-5210-HD
$RFQ
BAILEIGH Hydraulic Sheet Metal Shear SH-5210-HD
CALL FOR BEST PRICING! FEATURES: The SH-5210-HD heavy duty hydraulic shear is a heavy duty machine built for years of production. It will take what you can throw at it and keep coming back for more. This machine
BAILEIGH SH-5210 Hydraulic Sheet Metal Shear
$RFQ
BAILEIGH SH-5210 Hydraulic Sheet Metal Shear
CALL FOR BEST PRICING! FEATURES: Baileigh Industrial has long been a leading supplier of metal fabricating machines as well as metal cutting machinery and one of the machines that go us started was the SH-5210 hy
4' - 8' x 10 ga BIRMINGHAM® Deluxe Hydraulic Shears
$RFQ
4' - 8' x 10 ga BIRMINGHAM® Deluxe Hydraulic Shears
CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: Spring hold downs Two 24" front support arms 24" manual back gauge with wheel Safety full length finger guard High grade, high carbon / chrome Toolbox
BIRMINGHAM Heavy Duty Hydraulic Shear H-1065-C
$RFQ
BIRMINGHAM Heavy Duty Hydraulic Shear H-1065-C
CALL 386-304-3720 FOR AVAILABILITY FREE SHIPPING! FEATURES: High carbon, high chrome shear blades Manual quick change blade gap adjustment Front controlled power backgauge Hydraulic, electrical overlo
BIRMINGHAM 10' x 3/8" Heavy Duty Hydraulic Shear
$RFQ
BIRMINGHAM 10' x 3/8" Heavy Duty Hydraulic Shear
CALL 386-304-3720 FOR AVAILABILITY FEATURES: High carbon, high chrome shear blades Manual quick change blade gap adjustment Front controlled power backgauge Hydraulic, electrical overload protection Automatic swi
4' - 10' x 10 ga BIRMINGHAM® Hydraulic Shears
$RFQ
4' - 10' x 10 ga BIRMINGHAM® Hydraulic Shears
CALL FOR AVAILABILITY AND BEST PRICING! FEATURES: Well balanced and sturdy welded machine frame provides constant stability and rigidity The centralized hydraulic logical system offers the best performance with a qu
Categories:
Condition:
Manufacturer:
Location:
Price:
  •  to 
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>