buy & sell, new & used machinery, machine tools & equipment

<Prev | 101 | 102 | 103 | 104 | 105 | 106 | 107 | 108 | 109 | 110 | Next>
Refine: Viewing 10201 - 10300 of 20843 matches
Sort by:
Items Per Page:  20 |  50 |  100
2014 CATERPILLAR 930K WHEEL LOADER
$138,000
2014 CATERPILLAR 930K WHEEL LOADER
6 CYL CAT ENGINE, 4 SPD TRANS, GP BUCKET, 3 YARD CAPACITY, 20.5R25 TIRES, ENCLOSED CAB W/ A/C & HEAT, 805 HRS SHOWING - MACHINE HAS A POWERTRAIN + HYDRAULIC WARRANTY UNTIL APRIL 2020 OR 2305 HRS - COMING IN SOON
2012 JOHN DEERE 310J BACKHOE
$41,500
2012 JOHN DEERE 310J BACKHOE
4 CYL JD ENGINE, 4 SPD SHUTTLE SHIFT TRANS, 4X4, FRONT GP BUCKET (7 FT 2 IN WIDE), REAR GP BUCKET (24 IN WIDE), REAR MANUAL QUICK CONNECT, 12-16.5 FRONT TIRES, 19.5-24 REAR TIRES, 2 LEVER REAR JOYSTICK STEERING, 2594 HRS
AgieCharmilles Cut20P Wire EDM
$50,000
AgieCharmilles Cut20P Wire EDM
AgieCharmilles Cut20P Wire EDM 3756 Hours of Erosion Time with Chiller and transformer
  • X axis travel: 13.779"
  • Y axis travel: 9.842"
    5" LUCAS PRECISION TABLE TYPE HORIZONTAL BORING MILL MODEL: 542B-120
    $RFQ
    5" LUCAS PRECISION TABLE TYPE HORIZONTAL BORING MILL MODEL: 542B-120
    ONE (1) USED 5" LUCAS PRECISION TABLE TYPE HORIZONTAL BORING MILL MODEL: 542B-120 NEW: 1969 S/N: 42B-4301
    • Spindle diameter: 5"
    • X axis travel: 96"
      APK240 Hydraulic Angle Rolls 6" x 6" x 1"
      $RFQ
      APK240 Hydraulic Angle Rolls 6" x 6" x 1"
      Available in Stock! See the attached document for technical specifications. Angle Leg- Out: 6" x 6" x 1" Angle Leg-In: 6" x 6" x 1" Flat Iron on Flat: 12" x 2-1/2" Flat on E
      38" X 144" LEBLOND MODEL 32" HEAVY DUTY ENGINE LATHE
      $RFQ
      38" X 144" LEBLOND MODEL 32" HEAVY DUTY ENGINE LATHE
      38" X 144" LEBLOND MODEL 32" HEAVY DUTY ENGINE LATHE S/N NK929 NEW 1954 RATED SWING OVER BED ---------------------- 32" ACTUAL SWING OVER BED ------------
      • Swing: 38"
      • Centers: 144"
        72" Rowe Straightener
        $RFQ
        72" Rowe Straightener
        Make: Rowe Serial # 26906 Model # 05-72-68 Maximum Material Width: 72" Maximum Thickness: .067" Number of Work Rolls: 7 Driven Pinch Rolls AC Motor & Gear Box Control Panel / Electrical Drive
        Tru Turn 50" x 236" Manual Lathe, Brand New
        $RFQ
        Tru Turn 50" x 236" Manual Lathe, Brand New
        Reference #23665 Tru Turn 50" x 236" Manual Lathe, Brand New Model: Tru Turn 1250/6M CAPACITY: Swing Over Bed ....................... 50.78" Swing Over Cross Slide ............... 35.43" W
        • Swing: 50.78"
        • Centers: 35.43"
          10" X 10" AMADA FULLY AUTOMATIC HYDRAULIC HORIZONTAL BAND SAW
          $RFQ
          10" X 10" AMADA FULLY AUTOMATIC HYDRAULIC HORIZONTAL BAND SAW
          10" X 10" AMADA FULLY AUTOMATIC HYDRAULIC HORIZONTAL BAND SAW MODEL HA250 S/N 25400152 NEW 1992 CAPACITY ROUNDS ----------------------
          • Width capacity: 10"
          • Height capacity: 10"
            2017 CATERPILLAR 308E2 CR EXCAVATOR
            $98,500
            2017 CATERPILLAR 308E2 CR EXCAVATOR
            4 CYL CAT ENGINE, 18 IN STEEL PADS W/ RUBBER INSERTS, 24 IN BUCKET, QUICK CONNECT, BLADE 7 FT 7 IN WIDE, ENCLOSED CAB W/ A/C & HEAT. 471 HOURS SHOWING.
            10" X 10" AMADA FULLY AUTOMATIC HYDRAULIC HORIZONTAL BAND SAW
            $RFQ
            10" X 10" AMADA FULLY AUTOMATIC HYDRAULIC HORIZONTAL BAND SAW
            10" X 10" AMADA FULLY AUTOMATIC HYDRAULIC HORIZONTAL BAND SAW MODEL HA250 S/N 25400386 NEW 1996 CAPACITY ROUNDS ----------------------
            • Width capacity: 10"
            • Height capacity: 10"
              ADOP CNC PLATE DRILLING AND OXY-FUEL/PLASMA CUTTER
              $RFQ
              ADOP CNC PLATE DRILLING AND OXY-FUEL/PLASMA CUTTER
              Best for heavy-duty drilling and cutting jobs in various metalworking industries. Available in stock! Distributed by Provetco Technology. Technical Specifications: Entire system control: CNC (Mitsubishi or Siemens)
              2009 MORI SEIKI MODEL NT-1000/WZ 7-AXIS MILL/TURN CENTER, 2.05" BAR
              $RFQ
              2009 MORI SEIKI MODEL NT-1000/WZ 7-AXIS MILL/TURN CENTER, 2.05" BAR
              SPECIFICATIONS CAPACITIES MAXIMUM WORKPIECE SWING: 14.57” SWING OVER CROSS SLIDE: 14.57” SWING OVER CROSS SLIDE (TURRET 2): 11.81” MAX TURNING DIAMETER (TOOL-SPINDLE): 14.57” MAX TURNING DIAMETER (TOOL-SPINDLE/T
              • Swing: 14.57"
                4 Roll Plate Bending Machines - AKBEND
                $RFQ
                4 Roll Plate Bending Machines - AKBEND
                We have plate bending machines ready to be shipped from Florida. Feel free to come by and see the machines at the showroom. 4 roll hydraulic plate bending machines with capacity in thickness from 14 ga. to 8” and in
                AST-1200 MITER BAND SAW
                $RFQ
                AST-1200 MITER BAND SAW
                The Miter Band Saw has been designed with a rigid frame and equipped with high quality components to guarantee the best sawing results. With the increased cutting speed, the Miter Band Saw can cut materials at 90°or
                ABB Quintus Fluid Cell Press, Model QFC 1.1x3.0, 1400/68000 ton press force
                $RFQ
                ABB Quintus Fluid Cell Press, Model QFC 1.1x3.0, 1400/68000 ton press force
                ABB Quintus Fluid Cell Press Model: QFC 1.1 x 3.0 – 1400 Stock #: 20149-IS NEW: 1990 Operating Pressure: Programmable up to 20,000 psi Press Tables: Two (2) with independent operator control stations Press
                AFD Flange Drilling Machine
                $RFQ
                AFD Flange Drilling Machine
                High speed and high processing performance with AFD up to 40"x60" (1000×1500 mm) materials. The state of the art AFD Flange Drilling Machine is designed for drilling, marking and tapping plates. All moveme
                Beam Drilling Lines - ADM 1200 CNC
                $RFQ
                Beam Drilling Lines - ADM 1200 CNC
                10 axis 3 spindle AKDRILL ADM Drilling Machines provide high-quality solutions in the manufacturing of steel, construction, infrastructure, shipyards, and in various other fields. ADM series have the drilling capacity of
                CNC Angle Rolls 3″ x 3″ x 5/16″
                $52,000
                CNC Angle Rolls 3″ x 3″ x 5/16″
                3″ x 3″ x 5/16″ capacity new angle bending machine. Thanks to the combination of large roll shaft diameters and oversized bearing assemblies, APK machines can produce more bending power and torque with less flexing of th
                • Length: 41"
                • Width: 54"
                  31" X 39" X 18" HEAVY DUTY TILTING BOX TABLE FOR RADIAL ARM
                  $RFQ
                  31" X 39" X 18" HEAVY DUTY TILTING BOX TABLE FOR RADIAL ARM
                  31" X 39" X 18" HEAVY DUTY TILTING BOX TABLE FOR RADIAL ARM DRILL TABLE SIZE ------------------------------------ 31" X 39" X 18" FLOOR TO TOP OF TABLE --------------------- 28&q
                  STARTRITE | Vertical | Capacity18" x 26"|
                  $4,000
                  STARTRITE | Vertical | Capacity18" x 26"|
                  Vertical Capacity18" x 26" Cut angle 90° 45° Left, 10° Right Band 14' 4" x 1" 3 HP 440v / 3 Phases Dimensions 33" x 76" x 81"
                  2011 Fortus 400mc 3D Printer
                  $52,000
                  2011 Fortus 400mc 3D Printer
                  Specifications: Build Envelope..............................................................16” x 14” x 16” Accuracy....................±0.005” or ±0.0015” Per Inch Whichever is Greater Materials.......ASA
                  1985 K O LEE MODEL B2062 UNIVERSAL TOOL & CUTTER GRINDER, 8-1/4"
                  $RFQ
                  1985 K O LEE MODEL B2062 UNIVERSAL TOOL & CUTTER GRINDER, 8-1/4"
                  SPECIFICATIONS DISTANCE BETWEEN TAILSTOCKS: 32" DISTANCE BETWEEN WORK HEAD & TAILSTOCK CENTERS: 26" DISTANCE BETWEEN WORK HEAD COLLET AND TAILSTOCK: 27" DISTANCE BETWEEN CHUCK FACE AND TAILSTOCK
                  200 Ton HEIM S2-200 Straight Side Double Crank (Single Action) Press
                  $RFQ
                  200 Ton HEIM S2-200 Straight Side Double Crank (Single Action) Press
                  <span style="font-size: 22px;"><strong>200 TON HEIM S2-200 STRAIGHT SIDE DOUBLE CRANK (SINGLE ACTION) PRESS<br /> </strong></span><strong>NEW-1978</strong><br /> <br /&g
                  NEW SCOTCHMAN MODEL 50514-EC IRONWORKER
                  $RFQ
                  NEW SCOTCHMAN MODEL 50514-EC IRONWORKER
                  NEW SCOTCHMAN MODEL 50514-EC IRONWORKER S/N 4059EC0817 MADE IN THE USA STANDARD FEATURES:
                  1996 CITIZEN MODEL M-20 CNC SWISS TYPE SCREW LATHE, 20 MM BAR
                  $RFQ
                  1996 CITIZEN MODEL M-20 CNC SWISS TYPE SCREW LATHE, 20 MM BAR
                  SPECIFICATIONS MAX MACHINING DIAMETER: 25/32" MAX MACHINING LENGTH: 12.6" MAX DRILLING DIAMETER: .39” MAX TAPPING DIAMETER: M8 SPINDLE THROUGH HOLE DIAMETER: .94” MAIN SPINDLE SPEEDS: 200 – 8,100 RPM SPI
                  • Spindle hole diameter: 0.75"
                    1999 PREMIER MODEL 10120-R HYDRAULIC PRESS BRAKE, 10’ X 120 TON
                    $RFQ
                    1999 PREMIER MODEL 10120-R HYDRAULIC PRESS BRAKE, 10’ X 120 TON
                    SPECIFICATIONS CAPACITY: 120TONS OVERALL LENGTH OF BED AND RAM: 120” DISTANCE BETWEEN HOUSINGS: 100” MOTOR: 20 HP BENDING CAPACITY (MILD STEEL): 10’ X 3/16” STROKE LENGTH: 8” OPEN HEIGHT: 15” SHUT HEIGHT: 7” G
                    • Tonnage: 120T
                      1998 Haas VF-4APC Vertical Machining Center with Pallets, 50" X 20&quo
                      $RFQ
                      1998 Haas VF-4APC Vertical Machining Center with Pallets, 50" X 20&quo
                      TRAVELS X-AXIS: 50" Y-AXIS: 20" Z-AXIS: 25" SPINDLE NOSE TO TABLE: 4" – 29" TABLE LENGTH: 52" WIDTH: 18" MAXIMUM WEIGHT ON TABLE: 3,500 LBS T-SLOTS T-SLOTS WIDTH: .625&quo
                      • X axis: 50"
                      • Y axis: 20"
                        2017 CATERPILLAR 308E2 CR EXCAVATOR
                        $95,500
                        2017 CATERPILLAR 308E2 CR EXCAVATOR
                        4 CYL ENGINE, 18 IN RUBBER TRACKS, BLADE, GP BUCKET, QUICK CONNECT, PLUMBING ON STICK, PATTERN CHANGER, ENCLOSED CAB W/ A/C & HEAT, 306 HRS SHOWING
                        2006 JOHN DEERE 310G BACKHOE
                        $35,500
                        2006 JOHN DEERE 310G BACKHOE
                        4 CYL JD ENGINE, 4 SPD SHUTTLE SHIFT TRANS, 4X4, FRONT GP BUCKET (7 FT 1 IN WIDE), REAR GP BUCKET (18 IN WIDE), 12-16.5 FRONT TIRES, 19.5L-24 REAR TIRES, 2 LEVER REAR JOYSTICK CONTROLS, 1649 HRS SHOWING
                        TOYODA MODEL FHN100T 3-AXIS HORIZONTAL MACHINING CENTER
                        $RFQ
                        TOYODA MODEL FHN100T 3-AXIS HORIZONTAL MACHINING CENTER
                        TOYODA MODEL FHN100T 3-AXIS HORIZONTAL MACHINING CENTER<br /> <br /> New 1986<br /> <br /> Motor Driven with 35 HP, 3-Phase, 60 Cycle, AC Spindle Drive<br /> <br /> EQUIPPED WITH: Fanu
                        1991 EATON LEONARD MODEL VB200HP CNC ROTARY TUBE BENDER, 2" x .145&quo
                        $RFQ
                        1991 EATON LEONARD MODEL VB200HP CNC ROTARY TUBE BENDER, 2" x .145&quo
                        SPECIFICATIONS BENDING CAPACITY MAXIMUM BENDING CAPACITY: 2” OD X .145” WALL MAXIMUM CENTERLINE BENDING RADIUS: 8” MAXIMUM TRAVEL OF BEND ARM: 195 DEGREES MAXIMUM POB DEGREES: UNLIMITED SPEEDS: 30 RPM – DEGREE
                        • Maximum diameter: 2"
                          DENISON C-FRAME HYDRAULIC PRESS, 8 TON
                          $RFQ
                          DENISON C-FRAME HYDRAULIC PRESS, 8 TON
                          SPECIFICATIONS CAPACITY: 8 TON STROKE: 12" DAYLIGHT: 18" THROAT: 8" BED AREA: 10" X 16" GENERAL ELECTRICS: 480 VOLTS, 3 PH, 60 CYC DIMENSIONS 24” LR X 48” FB X 77” H EQUIPPED
                          • Tonnage: 8T
                          • Stroke: 12"
                            DENISON C-FRAME HYDRAULIC PRESS, 8 TON
                            $RFQ
                            DENISON C-FRAME HYDRAULIC PRESS, 8 TON
                            SPECIFICATIONS CAPACITY: 8 TON STROKE: 12" DAYLIGHT: 18" THROAT: 8" BED AREA: 10" X 16" GENERAL DIMENSIONS: 24” LR X 48” FB X 80” H SHIPPING DIMENSIONS: 48” LR X 48” LR X 80” H E
                            • Tonnage: 8T
                            • Stroke: 12"
                              60" x 7" Paxson Slitting Head
                              $RFQ
                              60" x 7" Paxson Slitting Head
                              Make: Paxson Arbor Width: 67" Arbor Diameter: 7" Adjustable Arbors Feed-Up Motor & Gear Box
                              • Maximum workpiece width: 60"
                              • Maximum workpiece thickness: 0.187"
                                60" x 40,000Lb Paxson Recoiler
                                $RFQ
                                60" x 40,000Lb Paxson Recoiler
                                Make: Paxson Mandrel Width: 62" Coil ID: 20" Coil OD: 72" Powered Gripper Powered Push-Off Motor: 50HP DC 650 / 2500 RPM
                                • Maximum weight capacity: 40000Lb
                                • Maximum coil width: 60"
                                  2000 Hitachi Seiki Model HT-23RIII CNC Lathe Seicos Control
                                  $34,995
                                  2000 Hitachi Seiki Model HT-23RIII CNC Lathe Seicos Control
                                  Year: 2000 Make: Hitachi Seiki Model: HT-23R III Condition: Good Electrical: 230/3Phase Machine Status: Under Power Shipping Info: Rigging Fee Extra Weight: 10500 Dimension: L x W x H 12' x 7' x 8&
                                  2013 INGERSOLL RAND UP6-40-125 ROTARY SCREW AIR COMPRESSOR & AIR DRYER
                                  $9,500
                                  2013 INGERSOLL RAND UP6-40-125 ROTARY SCREW AIR COMPRESSOR & AIR DRYER
                                  MOTOR VOLTAGE: 460 VOLT AC PHASE: 3 PHASE ENGINE: 40 HP PUMP CFM: 181 CFM RATES @: 125 PSI PUMP TYPE: ROTARY MAXIMUM PSI: 125 PSI AFTER COOLER: YES PUMP DRIVE: BELT DRIVE OIL TYPE: OIL LUBRICATED GENERAL
                                  2006 Calypso CNC water jet
                                  $57,995
                                  2006 Calypso CNC water jet
                                  Year: 2006 Make: Calypso Model: Hammerhead Condition: Good Machine Status: Not Under Power Shipping Info: We can load Weight: 6000 Dimension: L x W x H Machine Location: City: On Request State: Florida
                                  Pines # 2 hyd. Mandrel tube bender
                                  $69,795
                                  Pines # 2 hyd. Mandrel tube bender
                                  Year: ? Make: Pines Model: #2 Condition: Excellent Electrical: 208/3Phase Machine Status: Under Power Shipping Info: We can load Weight: 4500 Dimension: L x W x H 8ft x 4 ft x 4 ft Machine Location: Ci
                                  Mori Seiki # NT1000 / WZ Integrated Mill / Turn Center
                                  $155,995
                                  Mori Seiki # NT1000 / WZ Integrated Mill / Turn Center
                                  Year: 2010 Make: Mori Seiki Model: NT1000 / WZ Condition: Excellent Electrical: 230/3Phase Machine Status: Under Power Shipping Info: Rigging Fee Extra Weight: 18740 Dimension: L x W x H 106.5 x 95.5 x 93.
                                  2012 Okuma Multus B200II turning/milling center
                                  $409,990
                                  2012 Okuma Multus B200II turning/milling center
                                  Year: 2012 Make: Okuma Model: Multus B200II Condition: Excellent Electrical: 230/460/3 wired 460 Machine Status: Under Power Shipping Info: Rigging Fee Extra Weight: 25000? Dimension: L x W x H Machine
                                  10' x 1/4" NIAGARA SPARTAN SP10-1/4 HYDRAULIC SQUARING SHEAR
                                  $RFQ
                                  10' x 1/4" NIAGARA SPARTAN SP10-1/4 HYDRAULIC SQUARING SHEAR
                                  10' x 1/4" NIAGARA SPARTAN SP10-1/4 HYDRAULIC SQUARING SHEAR S/N S65791 NEW 1991 SHEARING CAPACITY -- ( MILD STEEL ) ------- 10' X 1/4" SHEARING CAPA
                                  • Maximum thickness: 0.25"
                                  • Cutting length: 10"
                                    Best 960 Radial Arm Saw
                                    $4,392
                                    Best 960 Radial Arm Saw
                                    The Best 960 radial arm saw offers adaptability, versatility, precision and durability to shops of all sizes. THREE PHASE MOTOR POWER 4 (3) Hp (Kw) SINGLE PHASE MOTOR POWER 3 (2.2) Hp (Kw) MOTOR SPEED 3360 DIAME
                                    Junior 640 Radial Arm Saw
                                    $3,832
                                    Junior 640 Radial Arm Saw
                                    The Junior 640 radial arm saw offers adaptability, versatility, precision and durability to shops of all sizes. Heavy castings and the eight bearing saw carriage makes this machine very accurate and rigid. THREE PHAS
                                    3/8" Patterson Wire Straighten And Cut Machine
                                    $RFQ
                                    3/8" Patterson Wire Straighten And Cut Machine
                                    No description providedMaximum Wire Diameter.375" (3/8") Maximum Cutoff Length6' Speed Range50 - 250 FPM Lots Of Tooling
                                    VECTRAX MODEL GS-20V VERTICAL MILL, 10" X 54"
                                    $RFQ
                                    VECTRAX MODEL GS-20V VERTICAL MILL, 10" X 54"
                                    SPECIFICATIONS TABLE SIZE: 10” X 54” TRAVERSE LONGITUDINAL TRAVEL (X-AXIS): 31.75” CROSS TRAVEL (Y-AXIS): 16.2” KNEE TRAVEL: 19” RAM TRAVEL: 18” HEAD MAIN MOTOR: 3 HP SPINDLE TAPER: R-8 SPINDLE SPEEDS (L
                                    • Table width: 10"
                                    • Table length: 54"
                                      DMG GildeMeister CTX-510 CNC Turning Center
                                      $49,500
                                      DMG GildeMeister CTX-510 CNC Turning Center
                                      DMG GILDEMEISTER CTX-510 CNC TURNING CENTER Make: DMG GILDEMEISTER Model No.: CTX-510 Serial No.: 943070 Year: 2005 Condition: Very Good Comes with 15" Chuck, Steady Rest, Tailstock, Books &
                                      • Swing: 26.77"
                                      • Centers: 45.27"
                                        60" x 30,000Lb McKay Uncoiler
                                        $RFQ
                                        60" x 30,000Lb McKay Uncoiler
                                        Make: McKay Model: 69-3903-11 Mandrel Width: 69" Weight Capacity: 30,000Lb Coil ID: 20" Coil OD: 72" Powered Hold-Down Roll Hydraulic Mandrel Expansion AC Feed-Up Motor Air Cooled Brake Sel
                                        • Maximum weight capacity: 30000Lb
                                        • Maximum coil width: 60"
                                          10 Stand x 1-1/8" x 6" LOCKFORMER Roll Former
                                          $RFQ
                                          10 Stand x 1-1/8" x 6" LOCKFORMER Roll Former
                                          Serial #SO-1383 Stands: 10 Direction: R-L Roll Shaft Dia: 1.125" Roll Space: 6" Center, 2.5" Outsides Horizontal Centers: 6" Vertical Center: 3.5" Base to Lower Shaft: 3.25" Shaft Keyway Size: .25" Capacity: 20
                                          28 Stands Tishken Duplex Roll Former
                                          $RFQ
                                          28 Stands Tishken Duplex Roll Former
                                          Make: Tishken Year New: 1996 Serial # 21490 Number of Stands: 28 Spindle Diameter: 3" Maximum Material Thickness: .148" Roll Space: 30" - 40" Upper Spindle Adjustment: 6.5" - 8-3/8&quo
                                          • # Stands: #28
                                          • Roll diameter: 3"
                                            CLAUSING KONDIA FV-1 2-AXIS CNC VERTICAL MILL WITH PROTOTRAK MX-2 CONTROL
                                            $RFQ
                                            CLAUSING KONDIA FV-1 2-AXIS CNC VERTICAL MILL WITH PROTOTRAK MX-2 CONTROL
                                            SPECIFICATIONS TABLE TABLE SIZE: 9” X 48” T-SLOT: 5/8" X 3" X 2-9/16" TABLE LOAD CAPACITY: 880 LBS TRAVEL LONGITUDINAL TRAVEL: 36" SADDLE TRAVEL: 15" KNEE TRAVEL: 16.5" RAM
                                            2012 CATERPILLAR D3K2 XL DOZER - E6735
                                            $52,500
                                            2012 CATERPILLAR D3K2 XL DOZER - E6735
                                            4 CYL CAT ENGINE, HY-STAT TRANS W/ JOYSTICK STEERING, 16 IN PADS, RECENTLY INSTALLED NEW TOP & BOTTOM ROLLERS, 6 WAY BLADE (8 FT 7 IN WIDE), 3RD VALVE FOR RIPPER, HEAT, 3068 HRS SHOWING
                                            2007 CATERPILLAR CB534DXW ROLLER - E6738
                                            $37,000
                                            2007 CATERPILLAR CB534DXW ROLLER - E6738
                                            4 CYL CAT ENGINE, 2 SPD TRANS, DUAL 79 IN SMOOTH DRUM, DRUM DRIVE, VARIABLE VIBRATION, WATER SYSTEM, FRONT AND REAR SPRAY BARS, OROPS
                                            2007 INGERSOLL RAND PT125R ROLLER - E6740
                                            $35,500
                                            2007 INGERSOLL RAND PT125R ROLLER - E6740
                                            4 CYL CUMMINS ENGINE, HYDRO-STATIC TRANS, 4 FRONT WHEELS, 5 REAR WHEELS, 7.50-15 TIRES, PRESSURIZED 100 GAL WATER TANK, FRONT AND REAR SPRAY BARS, OROPS, 2388 HRS SHOWING
                                            2004 INGERSOLL RAND PT-125R ROLLER - E6741
                                            $32,000
                                            2004 INGERSOLL RAND PT-125R ROLLER - E6741
                                            4 CYL CUMMINS ENGINE, HYDRO-STATIC TRANS, 4 FRONT WHEELS, 5 REAR WHEELS, 7.50-15 TIRES, PRESSURIZED 100 GAL WATER TANK, FRONT AND REAR SPRAY BARS, OROPS
                                            *NEW* 149 Ton x 10.17' Ermak Speed Bend CNC Press Brake
                                            $RFQ
                                            *NEW* 149 Ton x 10.17' Ermak Speed Bend CNC Press Brake
                                            Specifications Capacity 149 Tons Overall Bending Length 122" Distance Between Columns 102.4" Throat 16.1" Daylight 21.7" Stroke 10.8" Approach Speed 7.87 IPS Bending Speed .47 IPS Retu
                                            • Tonnage: 149T
                                              HAAS VF3 VERTICAL MACHINING CENTER W/PALLET CHANGER UMBRELLA STYLE TOOL CHA
                                              $RFQ
                                              HAAS VF3 VERTICAL MACHINING CENTER W/PALLET CHANGER UMBRELLA STYLE TOOL CHA
                                              HAAS VF3 VERTICAL MACHINING CENTER W/PALLET CHANGER UMBRELLA STYLE TOOL CHANGER MFG:2006
                                              RMG Uncoiler Model 1216-02
                                              $RFQ
                                              RMG Uncoiler Model 1216-02
                                              No description providedMaximum Coil Weight4,000 lbs Maximum Wire Size (Alloy).750" Maximum Wire Size (Mild Steel)1" Maximum Rod Size (Alloy).50" Maximum Rod Size (Mild Steel).63" Mandrel Length6' Prefeeding Speed30 FPM E
                                              3" x .197″ BRONX #6CR 4-1/2 BW Straightener
                                              $RFQ
                                              3" x .197″ BRONX #6CR 4-1/2 BW Straightener
                                              6-Roll, Vertically Opposed Cross Roll Design OD Range: .394"-2" Max Wall Thickness: .197" Max OD Admitted: 3" Direction: R-L Roll Size: 4" Diameter x 8" Long Manual Roll Adjustment: 3" Approx Speed: 60–120 MPM
                                              OKUMA CROWN L1060 CNC TURNING CENTER
                                              $RFQ
                                              OKUMA CROWN L1060 CNC TURNING CENTER
                                              OKUMA CROWN L1060 CNC TURNING CENTER S/N 1531 NEW 1999 SWING OVER BED ------------------------------- 21.65" MAXIMUM OVER CARRIAGE --------------------- 15.75" MAXIMUM TURNING
                                              • Swing: 21.65"
                                                Kearney and Trecker or Milwaukee 40:1 Dividing Head
                                                $RFQ
                                                Kearney and Trecker or Milwaukee 40:1 Dividing Head
                                                ****Excellent Condition***** 40:1 - K & T or Milwaukee Dividing Head Runs Smoothly For More Information Please Contact Mickey at 760-662-9299 or Email: [email protected]
                                                2013 BOBCAT E80A EXCAVTOR - E6727
                                                $59,500
                                                2013 BOBCAT E80A EXCAVTOR - E6727
                                                4 CYL YANMAR ENGINE, 18 IN RUBBER TRACKS, 24 IN BUCKET, MANUAL QUICK CONNECT, BLADE 7 FT 6 IN WIDE, PLUMBING ON STICK, PATTERN CHANGER, ENCLOSED CAB W/ A/C & HEAT. SHOWING 1743 HOURS.
                                                2001 JOHN DEERE 770CH MOTOR GRADER - E6729
                                                $65,500
                                                2001 JOHN DEERE 770CH MOTOR GRADER - E6729
                                                6 CYL JD ENGINE, 8 SPD TRANS, BLADE (14 FT), REAR RIPPER, 14.00R24 TIRES, ENCLOSED CAB W/ A/C & HEAT, 7364 HRS SHOWING
                                                125" x 629" Mackintosh-Hemphill 3-Way Bed Engine Lathe
                                                $RFQ
                                                125" x 629" Mackintosh-Hemphill 3-Way Bed Engine Lathe
                                                Reference #28706 Mackintosh-Hemphill 125" x 629" 3-Way Bed Engine Lathe Retrofit: 2012 FEATURES: Machine was Fully Retrofit in 2012 Fanuc 21i CNC Control CAPACITIES: Maximum Swing Over Carriag
                                                • Swing: 125.98"
                                                • Centers: 629.92"
                                                  1600mm x 20mm UBR Sheet Leveler
                                                  $RFQ
                                                  1600mm x 20mm UBR Sheet Leveler
                                                  Make: UBR WMW Gotha (Germany) Maximum Material Width: 1600mm Material Thickness: 4mm - 20mm Number of Work Rolls: 11 Work Roll Diameter: 180mm Up & Down Back-Up Flights Speed: 10 meters per minute Motor:
                                                  • Width: 64"
                                                  • Thickness: 0.787"
                                                    MTR CNC, Turn-Mill Index Table w/Siemens 840 D CNC, 200 ton table capacity.
                                                    $RFQ
                                                    MTR CNC, Turn-Mill Index Table w/Siemens 840 D CNC, 200 ton table capacity.
                                                    MTR CNC, Turn-Mill Index Table Stock#: 60395-SB Year: New 2006 Specifications: Table diameter: 16 ft. Table height: 45” Table Capacity: 200 Ton Bearing: Hydrostatic Track Diameter: 116” Dual Track
                                                    Press Machine| Stroke 10" |
                                                    $RFQ
                                                    Press Machine| Stroke 10" |
                                                    Press Machine Stroke 10" Bed 10" x 59" Dimensions 75" x 75" x 106" *without hydraulic unit
                                                    • Stroke: 10"
                                                      1-1/2″ x .120″ PINES #1 Horizontal Tube Bender
                                                      $RFQ
                                                      1-1/2″ x .120″ PINES #1 Horizontal Tube Bender
                                                      SERIAL #11040–71236 YEAR: 1971 Round Tube: • Max OD: 1.5" (38.1 mm) • Max Wall: .109" (2.76 mm) • 1" (25.4 mm) Schedule 80 Steel • Max Yield Pressure: 40,000 PSI Square Tube: • Max OD: 1.125" (28.5 mm) • Max W
                                                      3/8" RMG 67 25190-90 Wire Drawer
                                                      $RFQ
                                                      3/8" RMG 67 25190-90 Wire Drawer
                                                      No description providedMaximum Wire Diameter (Alloy).312" Motor25 HP Maximum Speed190 FPM Capstan Diameter28" Maximum Wire Diameter (Mild Steel).375" (3/8") <span s
                                                      • Block diameter: 0.375"
                                                      • Block diameter: 0.375"
                                                        96" x 60,000Lb P/M Double Mandrel Uncoiler
                                                        $RFQ
                                                        96" x 60,000Lb P/M Double Mandrel Uncoiler
                                                        Make: P/M (Production Machinery) Serial # 145-150 Weight Capacity: 60,000Lb Material Width: 6" - 96" Dual Expandable Mandrels Dual Sliding Base Powered Hold-Down Rolls One Mandrel was Recently Painte
                                                        • Maximum weight capacity: 60000Lb
                                                        • Maximum coil width: 96"
                                                          10 TON POWER TEAM HYDRAULIC H-FRAME PRESS
                                                          $RFQ
                                                          10 TON POWER TEAM HYDRAULIC H-FRAME PRESS
                                                          10 TON POWER TEAM HYDRAULIC H-FRAME PRESS Stock # K14140 EQUIPPED WITH: H-Frame Design, Power Team R10-6SA Hydraulic Cylinder, Power Team HF-32 Hydraulic Pump, 2-Speed Hydraulic Hand
                                                          • Tonnage: 10T
                                                          • Stroke: 6"
                                                            72" x 60,000Lb Aetna - Standard Uncoiler
                                                            $RFQ
                                                            72" x 60,000Lb Aetna - Standard Uncoiler
                                                            Make: Aetna-Standard Mandrel Width: 84" Weight Capacity: 60,000Lb Coil ID: 24" Coil OD: 72" Powered Mandrel Expansion Sliding Base Motirized Brake Feed-Up Motor Drive
                                                            • Maximum weight capacity: 60000Lb
                                                            • Maximum coil width: 72"
                                                              72" x .135" Bronx 4-Hi Precision Leveler
                                                              $RFQ
                                                              72" x .135" Bronx 4-Hi Precision Leveler
                                                              Make: Bronx Material Width: 12" - 72" Material Thickness: .020" - .135" Work Roll Diameter: 1.75" Work Roll Width: 77" Number of Work Rolls: 19 Number of Back-Up Flights: 9 Driven
                                                              • Width: 72"
                                                              • Thickness: 0.135"
                                                                61' Steel I-beam bridge
                                                                $8,500
                                                                61' Steel I-beam bridge
                                                                61' span steel I-beam bridge frame with 5 cross pieces. I-beams measure 3'x12". Bolts and nuts fasteners included. Width of span stringers center to center will accommodate the wheel base of a ten yard du
                                                                3/16" National Single Stroke Solid Die Cold Header
                                                                $RFQ
                                                                3/16" National Single Stroke Solid Die Cold Header
                                                                No description providedMaximum Wire Diameter3/16" Maximum Shank Length1" Maximum Cutoff Length1-1/2" Maximum Production300 PPM Approx. Weight4,000 lbs AC Motor &am
                                                                THK Ball Screws X and y axis
                                                                $1,490
                                                                THK Ball Screws X and y axis
                                                                One is 10-feet in length, One is 5-foot length, $1,490.00 Plus Freight Re-balled with new properly sized ball bearings.
                                                                CLEARANCE! 6000 Lb x 20″ EGAN #M601-20 Single Uncoiler
                                                                $6,000
                                                                CLEARANCE! 6000 Lb x 20″ EGAN #M601-20 Single Uncoiler
                                                                Capacity: 6000 Lbs Max Width: 20″ ID Range: 16″–20″ Max OD: 60″ EQUIPPED WITH: Manual Expansion 4-Arm Brake 2 Keepers NOTE: Air motor needs work DIMENSIONS: 5′ x 3′ x 5′ APPROX WEIGHT: 4000 Lbs LOCATIO
                                                                • Maximum weight capacity: 6000Lb
                                                                • Maximum coil width: 20"
                                                                  50 Ton Used Airam Cut Off Press With Large Bed, Mdl. 3562, Note: New Replacement Cost $ 61
                                                                  $12,500
                                                                  50 Ton Used Airam Cut Off Press With Large Bed, Mdl. 3562, Note: New Replacement Cost $ 61
                                                                  Tonnage 50 Bed Size (L- R, F- B) 70" x 51" Distance Between Guide Pins (L- R, F- B) 61" x 32 1/2" Stroke 3" Guide Pins Diameter 2 1/2" Dimensions (L x D x H) 70" x 70" x 84" WEIGHT 10,000 Lbs.
                                                                  75 Ton x 5" Used Minster OBS Punch Press, Mdl. 70-4-1/2, Bolster Plate with Ball Tran
                                                                  $29,500
                                                                  75 Ton x 5" Used Minster OBS Punch Press, Mdl. 70-4-1/2, Bolster Plate with Ball Tran
                                                                  Tonnage 75 Tons Stroke 5" Opening Between Uprights 18-1/2" Shank Szie 2" Ram Area 18" x 24" Throat 11" Dimensions (W x D x H) Control Box 37" x 13" x 61" Dimensions (W x D x H) (Machine) 70" x 78
                                                                  25 Ton x 3" Used Rousselle Gap Frame OBI Punch Press (Single Crank), Mdl. #3G, Air Tr
                                                                  $5,950
                                                                  25 Ton x 3" Used Rousselle Gap Frame OBI Punch Press (Single Crank), Mdl. #3G, Air Tr
                                                                  Tonnage 25 Stroke 3" Shut Height 9 3/4" Bed Size ( L-R, F-B ) 20" x 14" Ram Size ( L-R, F-B ) 8 1/4" x 5 1/2" Throat 18" Strokes Per MInute 135 WEIGHT 4400 Lbs. Electric Foot Pedal Air Tri
                                                                  20 Ton x 2" Used Benchmaster High Speed Press, Mdl. 20-4-2424-2-14-PP 20/300-787F, Re
                                                                  $5,500
                                                                  20 Ton x 2" Used Benchmaster High Speed Press, Mdl. 20-4-2424-2-14-PP 20/300-787F, Re
                                                                  Stroke 2" Bed Area 24" x 24" Shut Height 14" Strokes Per MInute 20 - 300 Reeves Variable Speed Drive Hydraulic Overlaod Protection Palm Button Controls W/Emergency Stop Auto Lube System Pedestal
                                                                  20 Ton x 1-1/4" Used Minster High Speed Punch Press, Mdl. P2-20-24, Air Clutch & Brak
                                                                  $17,500
                                                                  20 Ton x 1-1/4" Used Minster High Speed Punch Press, Mdl. P2-20-24, Air Clutch & Brak
                                                                  NOTE:  This press is set up in Jog Mode right now.  Depending on which feeder you use it will need to be customized to your setup.  Press Runs well.  Rear Feeder is currently connected.  The Vam
                                                                  35 Ton x 15" Used Denison Hydraulic MultiPress (C Frame Style), Mdl. SPLA35C, Safety
                                                                  $9,950
                                                                  35 Ton x 15" Used Denison Hydraulic MultiPress (C Frame Style), Mdl. SPLA35C, Safety
                                                                  Tonnage 35 Stroke 15" Bed Size (L-R, F- B) 20" x 30" Bore 4-3/4" Ram 3-1/4" PSI Rating 3950 Horsepower 30 H.P. Voltage WEIGHT 15,000 Lbs. Voltage 440v 3-Phase Note: This Machine Was O
                                                                  30 Ton x 18" Used Logan Hydraulic Press, Mdl. 6000 D-10, Tonnage Indicator, Foot Trea
                                                                  $6,500
                                                                  30 Ton x 18" Used Logan Hydraulic Press, Mdl. 6000 D-10, Tonnage Indicator, Foot Trea
                                                                  Tonnage 30 Stroke 18" Daylight 19" Throat Depth 8 1/2" Bed Area (L-R, F-B) 24 1/2" x 14" Ram Area 6" Ram Cylinder Diameter 4" Type C-Frame Horsepower 15 H.P. Dimensions (LxDxH) 34" x 60" x
                                                                  60 Ton x 6" Used Savage 4 Post Hydraulic Blanking Trim Press, Mdl. 60HTP, STI Minisaf
                                                                  $32,500
                                                                  60 Ton x 6" Used Savage 4 Post Hydraulic Blanking Trim Press, Mdl. 60HTP, STI Minisaf
                                                                  For Questions on Specifications please contact http:www.Savagepress.com Note:  This machine has 3 Pieces.  Press, Electrical Cabinet and the Hydraulic Pump.SAVAGE 4 post presses are built with very long b
                                                                  50 Ton x 18" Used Hannifin Hydraulic Press, Mdl. 500-41, Tonnage Gauge, #6649
                                                                  $11,500
                                                                  50 Ton x 18" Used Hannifin Hydraulic Press, Mdl. 500-41, Tonnage Gauge, #6649
                                                                  Tonnage 50 Stroke 18" Daylight 18" Bed Size (L-R, F-B) 40 1/2" x 24" Ram Size (L-R, F-B) 23" x 22" Ram Cylinder Diameter 5 1/2" Type C-Frame Horsepower 15 H.P. Dimensions (LxWxH) 70" x 50" x 1
                                                                  25 Ton x 3/4" Used Bliss High Speed Punch Press, Mdl. , Shut Height Indicator, Bliss
                                                                  $21,500
                                                                  25 Ton x 3/4" Used Bliss High Speed Punch Press, Mdl. , Shut Height Indicator, Bliss
                                                                  Capacity 25 Ton x 3/4" Bed Area (F-B, L-R) 24" x 18" Stroke 3/4" Crankshaft Diameter 2-1/2" Strokes Per Minute ( Variable ) 220 - 660 SPM Shut Height 10-1/2" Horsepower 5 H.P. WEIGHT 7,000 Lbs.
                                                                  250 Ton Used Best Press Hydraulic Powder Compacting Press (Up And Down Acting), Mdl. JC-14
                                                                  $65,000
                                                                  250 Ton Used Best Press Hydraulic Powder Compacting Press (Up And Down Acting), Mdl. JC-14
                                                                  This press was pressing Zerconium Oxide into the round white pucks you see in the photos.It was recently reconditioned including-- New hydraulic fittings- New Hydraulic Seals- Hydraulic container cleaned and conditioned
                                                                  32 Ton x 4" Used Minster OBI Press As IS Machine, Mdl. #4, Foot Pedal, #20000-36-60-H
                                                                  $12,000
                                                                  32 Ton x 4" Used Minster OBI Press As IS Machine, Mdl. #4, Foot Pedal, #20000-36-60-H
                                                                  Tonnage 32 Stroke 4" Shut Height 11 1/2" Bed Size (L-R, F-B) 24" x 15" Ram Size (L-R, F-B) 15" x 10 1/2" Throat 8 1/4" Opening Thru Back 11 1/2" Strokes Per MInute 100 Horsepower 3 H.P. Clu
                                                                  500 Ton Used Bliss Straight Side Stamping Press (BIG HEAVY DUTY PUNCH PRESS), Mdl. HP2-500
                                                                  $RFQ
                                                                  500 Ton Used Bliss Straight Side Stamping Press (BIG HEAVY DUTY PUNCH PRESS), Mdl. HP2-500
                                                                  Tonnage 500 Ton Bed Area (L-R, F-B) 84" x 48" Stroke Length 6" Slide Adjustment 6" Shut Height 18" Bolster Plate 8" Thick, T-Slotted Stroke Per Minute (Variable) 30 - 60 SPM Bed Opening 66" x 28"
                                                                  100 Ton x 5" Used Schuler Beuhler (Excellent Shape) C-Frame Straight Side Stamping Pr
                                                                  $54,500
                                                                  100 Ton x 5" Used Schuler Beuhler (Excellent Shape) C-Frame Straight Side Stamping Pr
                                                                  Capacity 100 Ton x 5" Stroke 5" Stroke Adjustment 3.9" Maximum Open Height 14.5" Table Size 37" x 25" Shank Hole 1.9" Distance of the Slide, Maximum Tool Dimension (BxD) 21" x 17" Distance Betwee
                                                                  80 Ton x 10" Used Federal OBI Press, Mdl. #7, Wintress Dipro 1500 Die Monitor, Air Cl
                                                                  $24,500
                                                                  80 Ton x 10" Used Federal OBI Press, Mdl. #7, Wintress Dipro 1500 Die Monitor, Air Cl
                                                                  Tonnage 80 Stroke 10" Bed Size (L-R, F-B) 36" x 28" Shut Height 13 1/2" Throat 15" Strokes Per MInute 75 Clutch Type Air Clutch Ram Size (L-R, F-B) 28" x 18" Horsepower 7 1/2 Dimensions (Lx
                                                                  150 Tons x 10" Used Chicago Straight Side Double Crank Punch Press, Mdl. , Air Clutch
                                                                  $14,500
                                                                  150 Tons x 10" Used Chicago Straight Side Double Crank Punch Press, Mdl. , Air Clutch
                                                                            Tonnage 150 Ton Bed Area 84" x 48" Shut Hieght 20" Stroke Length 10" Ram Size (L-R, F-B) 74" x 42" Distance From Floor To Bed 44" Dimensions
                                                                  50 Ton Used Whitney Single End Punch, Mdl. 652-50, Foot Pedal, #7206 *SPECIAL PRICE! ASK S
                                                                  $12,000
                                                                  50 Ton Used Whitney Single End Punch, Mdl. 652-50, Foot Pedal, #7206 *SPECIAL PRICE! ASK S
                                                                  Foot Pedal
                                                                  20 Kilonewton Used Eckold Riveter, Shear and Forming Tool, Mdl. HSP 900/20, Dual Palm Cont
                                                                  $17,500
                                                                  20 Kilonewton Used Eckold Riveter, Shear and Forming Tool, Mdl. HSP 900/20, Dual Palm Cont
                                                                  The HSP 900/20 is a hydraulic press in special design with 900 mm horizontal throat depth and 20 kilonewton pressure. Stroke position adjustable by hand wheel. Throat 36" Vertical Height 12" ~ 21" Stroke 0 -
                                                                  8" Used Dayton Bench Grinder, Mdl. 42909B, #A3999
                                                                  $150
                                                                  8" Used Dayton Bench Grinder, Mdl. 42909B, #A3999
                                                                  Capacity 8" Arbor Size 5/8" Wheel Center to Center 16-1/2" Grit 32 & 60 Horsepower 3/4 H.P Maximum Speed 3,450 RPM None
                                                                  1/2" x 3.9" Used Cavallin Tandem Plate & Wire Rolling Mill Jewelry Making Machin
                                                                  $4,500
                                                                  1/2" x 3.9" Used Cavallin Tandem Plate & Wire Rolling Mill Jewelry Making Machin
                                                                  Capacity 1/2" x 3.9" Roll Diameter 2" Roll Width 3.9" Roll Speed 16/17 RPM Production Rate 3m. per minute Horsepower 1 H.P. WEIGHT 400 Lbs. Manual Downfeed Adjustment 110V.
                                                                  26" Trennjaeger Heavy Duty Ferrous Up-Cut Cold Saw, Mdl. PMC-8, (2) Vertical Hydrauli
                                                                  $14,500
                                                                  26" Trennjaeger Heavy Duty Ferrous Up-Cut Cold Saw, Mdl. PMC-8, (2) Vertical Hydrauli
                                                                  Cutting Capacity: Rectangle 8 1/2" High x 24" Long Round 8 1/2" Sawblade Size 22"- 26" Non Ferrous 146 FPM Mitering 40 Degrees Rotary Table Size 27 1/2" Dimensions ( L x W x H ) 120" x 38" x 89"
                                                                  240 Ton x 16' Used Steelweld Mechanical Press Brake, Mdl. H3 1/2-12 (M), Note: Machine Is
                                                                  $12,000
                                                                  240 Ton x 16' Used Steelweld Mechanical Press Brake, Mdl. H3 1/2-12 (M), Note: Machine Is
                                                                  Tonnage 240 Ton Tonnage at Mid Stroke 160 Shut Height 12" Throat 18" Thickness of Base Plate 3" Bed Width 7 1/8" Stroke Length 3 1/2" Strokes Per MInute 22 Backgauge No Safety Curtains No
                                                                  Categories:
                                                                  Condition:
                                                                  Manufacturer:
                                                                  Location:
                                                                  Price:
                                                                  •  to 
                                                                  <Prev | 101 | 102 | 103 | 104 | 105 | 106 | 107 | 108 | 109 | 110 | Next>