Machine Sales – Buy or Sell New and Used Machinery and Machine Tools at Machine Sales

Aronson Model GE-250 25,000 lb. Welding Positioner

$RFQ

Reference #25620 Aronson Model GE-250 25,000 lb. Welding Positioner CAPACITY: Capacity At 12" Over Hang ............. 25,000 Lbs. Table Size ............................ 60" X 60" Tilt (Constant Spe

Weight capacity: 25000Lb

Melville, NY
View Listing

LNS SUPER HYDROBAR 3.12 HS-4.8 HYDROSTATIC 12' BAR FEED, 08'

$RFQ

MAX BAR LENGTH: 12' CAPACITIES .670 FOR 1/2" TO 5/8" .551 FOR 1/4" TO 1/2" .315 FOR 1/16" TO 1/4" (3) TUBES APPROX DIMENSIONS: 200" X 35" X 50" H NO PLUGS W

Maximum bar diameter: 0.625"
Maximum bar length: 12'

Hamel, MN
View Listing

LNS Super Hydrobar 3.12 HS-4.8 Hydrostatic 12' Bar Feed

$RFQ

Max Bar Length: 12' Capacities .670 for 1/2" to 5/8" .551 for 1/4" to 1/2" .315 for 1/16" to 1/4" (3) Tubes Approximate Dimensions 200" x 35" x 50"H No plug

Maximum bar diameter: 0.625"
Maximum bar length: 12'

Hamel, MN
View Listing

2003 SODICK AQ325L CNC WIRE EDM

$28,500

LINEAR WAYS, AUTOTHREADING, SUBMERGED, LQ1W CNC CONTROL

X axis travel: 13.7"
Y axis travel: 9.8"

Thousand Oaks, CA
View Listing

Router FxdBs Trim Rckwl

$159

Router FxdBs Trim Rckwl Model: 2082 Type 1 [Rockwell] S/N: N/A Fixed Base Trim Router 4Amp; 1Ph; 115Volt

Mesa, AZ
View Listing

Planer 2-1/2" PortaPlane

$200

Planer 2-1/2" PortaPlane Model: 126 [Rockwell] S/N: A116295 7.0 Amp; 1Ph; 120Volt

Mesa, AZ
View Listing

Miter Saw 12"-Ridgid

$249

Miter Saw 12"-Ridgid Model: 40J7 [Ridgid] S/N: E85575A 15Amp; 1Ph; 120Volt

Mesa, AZ
View Listing

Wide Blt Sndr 1632 5/1-PM

$5,599

Wide Blt Sndr 1632 5/1-PM Model: 1791250 1632-1 [Powermatic] S/N: 02011632169 Wide Belt Sander w/Mobile Base; 8 Extra Sanding Belts 5Hp; 1Ph; 230Volt

Mesa, AZ
View Listing

2008 Haas SL30T with Live Milling

$RFQ

2008 Haas SL30T with Live Milling Bar Capacity: 3" Chuck Size: 10" Spindle Speed: 3,400 RPM Spindle Motor: 30 HP X Axis Travel: 9.4" Z Axis Travel: 32.5" Rapid Rate Z Axis: 945 IPM Turret To

Livonia, MI
View Listing

1999 - 22 Ton Strippit 1250H/20 CNC Turret Punch

$RFQ

Capacity 22 Tons Travels 39" x 50" Max Sheet Size 120" x 50" Max Hole Diameter 3.5 Weight 25,000 lbs Equipped with: Fanuc OP Control 20 Stations w/ 3 A/I 2 Work Clamps Brush Table

Tonnage: 22T

SANTA ANA, CA
View Listing

1994 - 33 Ton Strippit 1000-SXP CNC Turret Punch

$RFQ

Capacity 33Tons Throat Depth 40" Travels 40"x50" Max Material thickness 1/4" Max Hole Diameter (10 ga) 3.5" Max Material Weight 205 lbs Turret Style Thin Main Motor 7.5 HP Weight (approx)

Tonnage: 33T

SANTA ANA, CA
View Listing

2022 - 242 Ton x 12.3' Ermak Power Bend Falcon CNC Press Brake

$RFQ

Capacity 242 Tons Overall Bending Length 148" Distance Between Housings 128" Y Rapid Speed 7.09" /sec Y Working Speed 0.39" /sec Y Return Speed 6.3" /sec X Axis Travel 31.5 X Axis Speed 19

Tonnage: 242T

SANTA ANA, CA
View Listing

BURN OFF OVEN, POLLUTION CONTROL 36"W 21"L 33"H

$RFQ

SINGLE SIDE SWING DOOR WITH POSITIVE LATCHING AND PRESSURE RELIEF ROOF PANEL. INSIDE WALLS, ROOF AND DOOR ARE LINED WITH LIGHT WEIGHT REFRACTORY. FLOOR IS A POURED CASTABLE REFRACTORY. TWO PACKAGE BURNERS (300,000 BTU/HR

Tolland, CT
View Listing

40 HP AIR COMPRESSOR, INGERSOLL RAND

$RFQ

40 HP WITH DRYER AND TANK, LATE MODEL. SHIP FROM SYRACUSE,NY

Motor: 40HP

Tolland, CT
View Listing

BURN OFF OVEN, TOP LOAD, POLLUTION CONTROL, 3'W 3'L 3'H

$RFQ

TOP LOAD DESIGN WITH HAND OPERATED COVER. LIGHT WEIGHT REFRACTORY LINING ON WALLS AND DOOR. FLOOR IS A POURED CASTABLE REFRACTORY. HEAT FOR MAIN HEAT AND AFTERBURNER ARE SUPPLIED BY PACKAGE BURNERS (

Tolland, CT
View Listing

INERT ATMOSPHERE OVEN, DESPATCH 25"W 25"L 25"H, 1000 F

$RFQ

INERT ATMOSPHERE OVEN HAS SINGLE SIDE SWING DOOR WITH POSITIVE LATCHING. HEATING AIR IS CIRCULATED HORIZONTALLY. INTERIOR HAS PROVISIONS FOR (8) SHELVES, (4) SHELVES ARE INCLUDED. ORIGINALLY DESIGNED FOR STRESS RELIEVIN

Chamber width: 25"
Chamber length: 25"

Tolland, CT
View Listing

QUINCY 50 HP ROTARY SCREW AIR COMPRESSOR

$RFQ

50 HP FIXED SPEED ROTARY SCREW COMPRESSOR RATED 226 ACFM. @ 100 PSI. PURCHASE NEW 2016 NEVER USED.

Motor: 50HP

Tolland, CT
View Listing

ROLLER CONVEYOR OVEN, FB SERIES, 4'W 8'L 56"H, 500 F GAS

$RFQ

DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES AT BOTH FRONT AND REAR. INTERIOR HAS A GRAVITY ROLLER CONVEYOR. HEAT IS SUPPLIED BY A GAS BURNER FIRING INTO A PROTECTED CHAMBER ABOVE WORK AREA AND CIRCULATED BY (2) ROOF M

Chamber width: 48"
Chamber length: 96"

Tolland, CT
View Listing

VACUUM FURNACE, SURFACE COMBUSTION 36"W 48"L 24"H, 1350 F

$RFQ

HORIZONTAL DOUBLE WALLED WATER COOLED CHAMBER WITH SINGLE SIDE SWING BOLT DOWN FRONT DOOR. WHEN PROCESS BEGINS VACUUM PUMPS EVACUATE THE VESSEL. WHEN COMPLETE VESSEL IS BACK FILLED WITH NITROGEN. HEAT IS

Chamber width: 36"
Chamber length: 48"

Tolland, CT
View Listing

CAR BOTTOM FURNACE, BEAVERMATIC, 1500 F GAS 7'W 10'L 7'H

$RFQ

HEAT (4,100,000 BTU/HR MAX TOTAL 5-7 PSI) IS SUPPLIED BY (9) NOZZLE MIX BURNERS WITH SPARK IGNITION AND FLAME SAFETY FIRING FROM ABOVE AND BELOW WORK AREA.. INTERIOR IS LINED WITH LIGHT WEIGHT REFRACTORY. CAR IS ELECTR

Chamber width: 84"
Chamber length: 120"

Tolland, CT
View Listing

VACUUM FURNACE, SECO WARWICK BOTTOM LOAD 48"DIA 48"H 2200 F

$RFQ

BOTTOM LOAD VERTICAL VACUUM FURNACE WITH METALLIC HOT ZONE AND HEATING ELEMENTS HAVING CAPACITY OF: 1000 LBS @ 1000C. HEATING ELEMENTS ARE MOUNTED IN FLOOR BELOW HEARTH,ON ROOF & SIDE WALL. POWER TO HEATING ELEM

Chamber width: 48"
Chamber length: 48"

Tolland, CT
View Listing

Amada HG2204RH 220 Ton x 14' 8-Axis CNC Press Brake W/Robotic Manipulat

$RFQ

Reference #32512 Amada HG2204RH 220 Ton x 14' 8-Axis CNC Press Brake W/Robotic Manipulator FEATURES: Yaskawa Motoman 6-Axis Robot 5-Axis CNC Back Gauge Part Load, Manipulator and Unload System CAPACITIES:

Tonnage: 220T

Melville, NY
View Listing

Doosan BM-2740M CNC Bridge Type Vertical Machining Center

$RFQ

Reference #32749 Doosan BM-2740M CNC Bridge Type Vertical Machining Center FEATURES: Fanuc 31iB CNC Control 60-Station Automatic Tool Changer Thru Spindle Coolant 4-Axis Ready SPECIFICATIONS: X-Axis Travel ..

Melville, NY
View Listing

Motoman Gantry Type Robotic Welding Cell

$RFQ

Reference #32742 Motoman Gantry Type Robotic Welding Cell FEATURES: Motoman DX100 Controller for Robot, Gantry and Rotary Positioner Motoman MA1900T 6 Axis Robot Miller Auto-Axcess 675 Weld Controller Binzel WH6

Melville, NY
View Listing

USED PIRANHA 140 TON HYDRAULIC SINGLE END PUNCH MODEL SEPP-140, Stock# 11037, Year: 1996

$RFQ

Brand: PiranhaModel: SEPP-140Specifications: Tonnage: 140 tonsThroat depth: 20.5"Platen size: 36" x 16"Open height: 14"Closed height: 7-3/4"Stroke length: 7"Strokes per minute: 24 @ 1"Main motor: 20 H.P.Voltage:

Warren, MI
View Listing

USED PIRANHA 120 TON HYDRAULIC IRONWORKER MODEL P-120, Stock# 11036, Year: 2004

$RFQ

Brand: PiranhaModel: P-120Specifications: Tonnage: 120 tonsThroat depth: 12"Round bar: 1/2" - 2"Square bar: 1/2" - 1-3/8" (blades not included) Plate shear: 20" x 1/2", 18" x 3/4", 12" x 1"Angle shear: 6" x 6" x

Warren, MI
View Listing

ShopSabre sidekick 10

$20,000

pretty much brand new shop sabre only ran about 4 sheets on the moving shops and need to down size. see listing for more details https://www.facebook.com/marketplace/item/275329715073839/

louisville, TN
View Listing

H Lioho LH-1 1/2 Arlington Milling Machine

$4,800

Type: Vertical Table: 9" x 42" Spindle: R8 Automatic feed: X Axis HP: 1.5 Dimensions: 56" x 58" x 82"

Vinton, TX
View Listing

Oster 716

$8,900

Swing over bed: 20" Spindle bore: 7-1/2" Between centers: 18" HP: 5 Voltage / Phase: 440 / 3 Weight: 3,550 lbs Dimensions: 28"x 79" x 57" Capacity: Tube: 1" to 6", Screw: 1&

Vinton, TX
View Listing

Pines Engineering Co. 11015-64033 Tube Bender

$6,500

Type: Hydraulic Bending radius: 180° Dies: Square 3/4" HP: 5 Voltage / Phase: 220 | 3 Dimensions: 39" x 148" x 40" Capacity: 1-1/2"

Vinton, TX
View Listing

Pullmax E 23D Shear

$22,500

Type: Hydraulic Backgauge: Motorized HP: 15 :: Phase: 3 Year: 1985 Dimensions: 90" x 138" x 83" Capacity: 10' x 1/4"

Vinton, TX
View Listing

George Gorton Machine Co. 2-28 Milling Machine

$5,500

Type: Horizontal Table: 12" x 56" Spindle: CAT 50 HP: 3 :: Phase: 3 Dimensions: 66" x 81" x 65"

Vinton, TX
View Listing

Okamoto PSG-64 Grinder

$10,500

Type: Hydraulic Grinding wheel size: 9-1/2" Table: 16" x 31" Year: 1981 Voltage / Phase: 220 | 3 Dimensions: 93" x 71" x 76"

Maximum gear diameter: 9.5"

Vinton, TX
View Listing

BLANCHARD ROTARY SURFACE GRINDER

$3,950

18" WHEEL

Chuck: 32"

Thousand Oaks, CA
View Listing

Plate Jointer Deluxe-PC

$159

Plate Jointer Deluxe-PC Model: 557 Type 2 [Porter Cable] S/N: 108835A0071 Plate Jointer 7.5Amp; 1Ph; 120Volt

Mesa, AZ
View Listing

Hankook Hanturn-95CM x 8000 CNC Lathe

$RFQ

Reference #32726 Hankook Hanturn-95CM x 8000 CNC Lathe FEATURES: Fanuc 31iA CNC Control 24" 3-Jaw Manual Chuck 12-Position Turret Live Milling C-Axis 10" Spindle Bore SMW Hydraulic Rest Tooling

Swing: 37.4"
Centers: 314.96"

Melville, NY
View Listing

OMAX 80X EnduroMax CNC Abrasive Water Jet Cutting System

$RFQ

Reference #32724 OMAX 80X EnduroMax CNC Abrasive Water Jet Cutting System FEATURES: Omax PC Based CNC Control 50 HP Enduromax 5060V Pump Closed Loop Water Recycling System Terrain Follower (Collision Sensing Fol

Output Pressure: 60000PSI
Motor: 50HP

Melville, NY
View Listing

Amada EG 6013 AR Ultra Compact Robotic Bending Cell

$RFQ

Reference #32717 Amada EG 6013 AR Ultra Compact Robotic Bending Cell FEATURES: AMNC 3i CNC Control with Vertical 18.5" Multi-Touch Display Dual Electric Servo Power Drive Automatic Tool Changer Yaskawa MH6S-

Tonnage: 67T

Melville, NY
View Listing

GMC GMM-949VPKG 9 x 49 in. Vertical Metal Mill w/2-Axis DRO

$RFQ

CALL 386-304-3720 FOR AVAILABILITY FEATURES: Our 9" x 49" metal milling machine aka vertical milling machines come fully equipped with a SINO digital readout and power feed. Our mill machines are rigid, mad

Port Orange, FL
View Listing

Fanuc Alpha 0iA Wire EDM, New in 1999

$RFQ

• Fanuc high speed digital / AC power supply • Fanuc series 18iW 64 bit CNC control • Fanuc serial / digital AC servo motors. Absolute position detection system • Five controllable axes (X,Y,U,V, Z) • Column mounted

X axis travel: 12.6"
Y axis travel: 8.7"

Prescott, AZ
View Listing

USED COPPER / NICKEL / CHROME MANUAL DIP PLATING LINE, Stock# 11038

$RFQ

Used copper / nickel, chrome manual dip plating lineMachine sold As-Is Where-IsAvailable as a turn-key operation including the industrial building located in the metropolitan Detroit area.  

Warren, MI
View Listing

Baileigh CNC Press Brake BP-3305CNC

$13,500

Used-Like New Shipping not included Need high production in a limited space? This CNC press brake offers programmable controls, top-quality components, and heavy steel construction for an unbeatable price. Deliver

Tonnage: 33T

Huntington, IN
View Listing

METALPRO 50 Ton Ironworker MP5000FS

$RFQ

CALL 386-304-3720 FOR AVAILABILITY FEATURES: The machine is ready with die holder, stripper, and punch retaining nut. The punch station can be used with a range of notchers, custom shape punching, and forming ope

Port Orange, FL
View Listing

METALPRO 45 Ton Ironworker MP4500FS

$RFQ

CALL 386-304-3720 FOR AVAILABILITY FEATURES: The machine is ready with die holder, stripper, and punch retaining nut. The punch station can be used with a range of notchers, custom shape punching, and forming ope

Port Orange, FL
View Listing

METALPRO 40 Ton Ironworker MP4000FS

$RFQ

CALL 386-304-3720 FOR AVAILABILITY FEATURES: The machine is ready with die holder, stripper, and punch retaining nut. The punch station can be used with a range of notchers, custom shape punching, and forming operati

Port Orange, FL
View Listing

Tru Turn 63" x 236" CKD CNC Lathe

$RFQ

Reference #32600 Tru Turn 63" x 236" CKD CNC Lathe Features: Fanuc Oi TF5 CNC Controls 55.11" 4-Jaw Chuck 4-Position Tool Post Center sleeve Roller Type Steady Rest 120-480MM Specific

Swing: 63"
Centers: 236"

Melville, NY
View Listing

Ingersoll Masterhead Adj Rail 5-Axis Plano Mill w/2-Axis Nutating Head

$RFQ

Reference #32616 Ingersoll Masterhead Adj Rail 5-Axis Plano Mill w/2-Axis Nutating Head Features: GE Fanuc Series 150M CNC Control 140 Station Automatic Tool Changer 4-Station Automatic Attachment Changer 98.4

Melville, NY
View Listing

Ingersoll Double Column 5-Axis CNC Bridge Mill W/Pallet Shuttle

$RFQ

Reference #32608 Ingersoll Double Column 5-Axis CNC Bridge Mill W/Pallet Shuttle FEATURES: Siemens 840D CNC Controls Pallet Shuttle System (4)Interchangeable Spindle Units Gun Drilling Attachment Renishaw Probe

Melville, NY
View Listing

USED HYD-MECH 18" X 29" AUTOMATIC VERTICAL TILT FRAME BANDSAW MODEL V-18APC, Sto

$RFQ

Brand: Hyd-MechModel: V-18APCSpecifications: Capacity @ 90 degrees: 18"w X 29"tCapacity @ 45 degrees: 18"w X 21"tMitering capability: 45 degrees left and rightBlade dimensions: 1-1/4" x .050" x 16'11"Blade drive

Warren, MI
View Listing

USED FABRILINE 4" X 4" X 3/8" HYDRAULIC ANGLE SHEAR MODEL FAS 44, Stock# 10

$RFQ

Brand: FabrilineModel: FAS 44Specifications: Tonnage: 35 tonsMaximum stroke: 2-1/8"Cycle time: 6 seconds Angle capacity: 4" x 4" x 3/8"Voltage: 220 / 440 volt 3 phaseWeight: 400 lbs.Equipped with:&n

Warren, MI
View Listing

buy & sell, new & used machinery, machine tools & equipment

Machines currently for sale: