buy & sell, new & used machinery, machine tools & equipment

<Prev | 101 | 102 | 103 | 104 | 105 | 106 | 107 | 108 | 109 | 110 | Next>
Refine: Viewing 10201 - 10300 of 20768 matches
Sort by:
Items Per Page:  20 |  50 |  100
THK Ball Screws X and y axis
$1,490
THK Ball Screws X and y axis
One is 10-feet in length, One is 5-foot length, $1,490.00 Plus Freight Re-balled with new properly sized ball bearings.
CLEARANCE! 6000 Lb x 20″ EGAN #M601-20 Single Uncoiler
$6,000
CLEARANCE! 6000 Lb x 20″ EGAN #M601-20 Single Uncoiler
Capacity: 6000 Lbs Max Width: 20″ ID Range: 16″–20″ Max OD: 60″ EQUIPPED WITH: Manual Expansion 4-Arm Brake 2 Keepers NOTE: Air motor needs work DIMENSIONS: 5′ x 3′ x 5′ APPROX WEIGHT: 4000 Lbs LOCATIO
  • Maximum weight capacity: 6000Lb
  • Maximum coil width: 20"
    50 Ton Used Airam Cut Off Press With Large Bed, Mdl. 3562, Note: New Replacement Cost $ 61
    $12,500
    50 Ton Used Airam Cut Off Press With Large Bed, Mdl. 3562, Note: New Replacement Cost $ 61
    Tonnage 50 Bed Size (L- R, F- B) 70" x 51" Distance Between Guide Pins (L- R, F- B) 61" x 32 1/2" Stroke 3" Guide Pins Diameter 2 1/2" Dimensions (L x D x H) 70" x 70" x 84" WEIGHT 10,000 Lbs.
    75 Ton x 5" Used Minster OBS Punch Press, Mdl. 70-4-1/2, Bolster Plate with Ball Tran
    $29,500
    75 Ton x 5" Used Minster OBS Punch Press, Mdl. 70-4-1/2, Bolster Plate with Ball Tran
    Tonnage 75 Tons Stroke 5" Opening Between Uprights 18-1/2" Shank Szie 2" Ram Area 18" x 24" Throat 11" Dimensions (W x D x H) Control Box 37" x 13" x 61" Dimensions (W x D x H) (Machine) 70" x 78
    25 Ton x 3" Used Rousselle Gap Frame OBI Punch Press (Single Crank), Mdl. #3G, Air Tr
    $5,950
    25 Ton x 3" Used Rousselle Gap Frame OBI Punch Press (Single Crank), Mdl. #3G, Air Tr
    Tonnage 25 Stroke 3" Shut Height 9 3/4" Bed Size ( L-R, F-B ) 20" x 14" Ram Size ( L-R, F-B ) 8 1/4" x 5 1/2" Throat 18" Strokes Per MInute 135 WEIGHT 4400 Lbs. Electric Foot Pedal Air Tri
    20 Ton x 2" Used Benchmaster High Speed Press, Mdl. 20-4-2424-2-14-PP 20/300-787F, Re
    $5,500
    20 Ton x 2" Used Benchmaster High Speed Press, Mdl. 20-4-2424-2-14-PP 20/300-787F, Re
    Stroke 2" Bed Area 24" x 24" Shut Height 14" Strokes Per MInute 20 - 300 Reeves Variable Speed Drive Hydraulic Overlaod Protection Palm Button Controls W/Emergency Stop Auto Lube System Pedestal
    20 Ton x 1-1/4" Used Minster High Speed Punch Press, Mdl. P2-20-24, Air Clutch & Brak
    $17,500
    20 Ton x 1-1/4" Used Minster High Speed Punch Press, Mdl. P2-20-24, Air Clutch & Brak
    NOTE:  This press is set up in Jog Mode right now.  Depending on which feeder you use it will need to be customized to your setup.  Press Runs well.  Rear Feeder is currently connected.  The Vam
    35 Ton x 15" Used Denison Hydraulic MultiPress (C Frame Style), Mdl. SPLA35C, Safety
    $9,950
    35 Ton x 15" Used Denison Hydraulic MultiPress (C Frame Style), Mdl. SPLA35C, Safety
    Tonnage 35 Stroke 15" Bed Size (L-R, F- B) 20" x 30" Bore 4-3/4" Ram 3-1/4" PSI Rating 3950 Horsepower 30 H.P. Voltage WEIGHT 15,000 Lbs. Voltage 440v 3-Phase Note: This Machine Was O
    30 Ton x 18" Used Logan Hydraulic Press, Mdl. 6000 D-10, Tonnage Indicator, Foot Trea
    $6,500
    30 Ton x 18" Used Logan Hydraulic Press, Mdl. 6000 D-10, Tonnage Indicator, Foot Trea
    Tonnage 30 Stroke 18" Daylight 19" Throat Depth 8 1/2" Bed Area (L-R, F-B) 24 1/2" x 14" Ram Area 6" Ram Cylinder Diameter 4" Type C-Frame Horsepower 15 H.P. Dimensions (LxDxH) 34" x 60" x
    60 Ton x 6" Used Savage 4 Post Hydraulic Blanking Trim Press, Mdl. 60HTP, STI Minisaf
    $32,500
    60 Ton x 6" Used Savage 4 Post Hydraulic Blanking Trim Press, Mdl. 60HTP, STI Minisaf
    For Questions on Specifications please contact http:www.Savagepress.com Note:  This machine has 3 Pieces.  Press, Electrical Cabinet and the Hydraulic Pump.SAVAGE 4 post presses are built with very long b
    50 Ton x 18" Used Hannifin Hydraulic Press, Mdl. 500-41, Tonnage Gauge, #6649
    $11,500
    50 Ton x 18" Used Hannifin Hydraulic Press, Mdl. 500-41, Tonnage Gauge, #6649
    Tonnage 50 Stroke 18" Daylight 18" Bed Size (L-R, F-B) 40 1/2" x 24" Ram Size (L-R, F-B) 23" x 22" Ram Cylinder Diameter 5 1/2" Type C-Frame Horsepower 15 H.P. Dimensions (LxWxH) 70" x 50" x 1
    25 Ton x 3/4" Used Bliss High Speed Punch Press, Mdl. , Shut Height Indicator, Bliss
    $21,500
    25 Ton x 3/4" Used Bliss High Speed Punch Press, Mdl. , Shut Height Indicator, Bliss
    Capacity 25 Ton x 3/4" Bed Area (F-B, L-R) 24" x 18" Stroke 3/4" Crankshaft Diameter 2-1/2" Strokes Per Minute ( Variable ) 220 - 660 SPM Shut Height 10-1/2" Horsepower 5 H.P. WEIGHT 7,000 Lbs.
    250 Ton Used Best Press Hydraulic Powder Compacting Press (Up And Down Acting), Mdl. JC-14
    $65,000
    250 Ton Used Best Press Hydraulic Powder Compacting Press (Up And Down Acting), Mdl. JC-14
    This press was pressing Zerconium Oxide into the round white pucks you see in the photos.It was recently reconditioned including-- New hydraulic fittings- New Hydraulic Seals- Hydraulic container cleaned and conditioned
    32 Ton x 4" Used Minster OBI Press As IS Machine, Mdl. #4, Foot Pedal, #20000-36-60-H
    $12,000
    32 Ton x 4" Used Minster OBI Press As IS Machine, Mdl. #4, Foot Pedal, #20000-36-60-H
    Tonnage 32 Stroke 4" Shut Height 11 1/2" Bed Size (L-R, F-B) 24" x 15" Ram Size (L-R, F-B) 15" x 10 1/2" Throat 8 1/4" Opening Thru Back 11 1/2" Strokes Per MInute 100 Horsepower 3 H.P. Clu
    500 Ton Used Bliss Straight Side Stamping Press (BIG HEAVY DUTY PUNCH PRESS), Mdl. HP2-500
    $RFQ
    500 Ton Used Bliss Straight Side Stamping Press (BIG HEAVY DUTY PUNCH PRESS), Mdl. HP2-500
    Tonnage 500 Ton Bed Area (L-R, F-B) 84" x 48" Stroke Length 6" Slide Adjustment 6" Shut Height 18" Bolster Plate 8" Thick, T-Slotted Stroke Per Minute (Variable) 30 - 60 SPM Bed Opening 66" x 28"
    100 Ton x 5" Used Schuler Beuhler (Excellent Shape) C-Frame Straight Side Stamping Pr
    $54,500
    100 Ton x 5" Used Schuler Beuhler (Excellent Shape) C-Frame Straight Side Stamping Pr
    Capacity 100 Ton x 5" Stroke 5" Stroke Adjustment 3.9" Maximum Open Height 14.5" Table Size 37" x 25" Shank Hole 1.9" Distance of the Slide, Maximum Tool Dimension (BxD) 21" x 17" Distance Betwee
    80 Ton x 10" Used Federal OBI Press, Mdl. #7, Wintress Dipro 1500 Die Monitor, Air Cl
    $24,500
    80 Ton x 10" Used Federal OBI Press, Mdl. #7, Wintress Dipro 1500 Die Monitor, Air Cl
    Tonnage 80 Stroke 10" Bed Size (L-R, F-B) 36" x 28" Shut Height 13 1/2" Throat 15" Strokes Per MInute 75 Clutch Type Air Clutch Ram Size (L-R, F-B) 28" x 18" Horsepower 7 1/2 Dimensions (Lx
    150 Tons x 10" Used Chicago Straight Side Double Crank Punch Press, Mdl. , Air Clutch
    $14,500
    150 Tons x 10" Used Chicago Straight Side Double Crank Punch Press, Mdl. , Air Clutch
              Tonnage 150 Ton Bed Area 84" x 48" Shut Hieght 20" Stroke Length 10" Ram Size (L-R, F-B) 74" x 42" Distance From Floor To Bed 44" Dimensions
    50 Ton Used Whitney Single End Punch, Mdl. 652-50, Foot Pedal, #7206 *SPECIAL PRICE! ASK S
    $12,000
    50 Ton Used Whitney Single End Punch, Mdl. 652-50, Foot Pedal, #7206 *SPECIAL PRICE! ASK S
    Foot Pedal
    20 Kilonewton Used Eckold Riveter, Shear and Forming Tool, Mdl. HSP 900/20, Dual Palm Cont
    $17,500
    20 Kilonewton Used Eckold Riveter, Shear and Forming Tool, Mdl. HSP 900/20, Dual Palm Cont
    The HSP 900/20 is a hydraulic press in special design with 900 mm horizontal throat depth and 20 kilonewton pressure. Stroke position adjustable by hand wheel. Throat 36" Vertical Height 12" ~ 21" Stroke 0 -
    8" Used Dayton Bench Grinder, Mdl. 42909B, #A3999
    $150
    8" Used Dayton Bench Grinder, Mdl. 42909B, #A3999
    Capacity 8" Arbor Size 5/8" Wheel Center to Center 16-1/2" Grit 32 & 60 Horsepower 3/4 H.P Maximum Speed 3,450 RPM None
    1/2" x 3.9" Used Cavallin Tandem Plate & Wire Rolling Mill Jewelry Making Machin
    $4,500
    1/2" x 3.9" Used Cavallin Tandem Plate & Wire Rolling Mill Jewelry Making Machin
    Capacity 1/2" x 3.9" Roll Diameter 2" Roll Width 3.9" Roll Speed 16/17 RPM Production Rate 3m. per minute Horsepower 1 H.P. WEIGHT 400 Lbs. Manual Downfeed Adjustment 110V.
    26" Trennjaeger Heavy Duty Ferrous Up-Cut Cold Saw, Mdl. PMC-8, (2) Vertical Hydrauli
    $14,500
    26" Trennjaeger Heavy Duty Ferrous Up-Cut Cold Saw, Mdl. PMC-8, (2) Vertical Hydrauli
    Cutting Capacity: Rectangle 8 1/2" High x 24" Long Round 8 1/2" Sawblade Size 22"- 26" Non Ferrous 146 FPM Mitering 40 Degrees Rotary Table Size 27 1/2" Dimensions ( L x W x H ) 120" x 38" x 89"
    240 Ton x 16' Used Steelweld Mechanical Press Brake, Mdl. H3 1/2-12 (M), Note: Machine Is
    $12,000
    240 Ton x 16' Used Steelweld Mechanical Press Brake, Mdl. H3 1/2-12 (M), Note: Machine Is
    Tonnage 240 Ton Tonnage at Mid Stroke 160 Shut Height 12" Throat 18" Thickness of Base Plate 3" Bed Width 7 1/8" Stroke Length 3 1/2" Strokes Per MInute 22 Backgauge No Safety Curtains No
    10" x 12" Used Karstens Stuttgart Universal Cylindrical Grinder, Mdl. ASA, Work
    $8,500
    10" x 12" Used Karstens Stuttgart Universal Cylindrical Grinder, Mdl. ASA, Work
    NOTE:  THIS MACHINE DOES NOT HAVE THE COMPLETE OPTIONAL INTERNAL GRINDING ATTACHMENT Capacity Swing Over Table 10" Distance Between Centers 12" Grinding Wheel Diameter x Width x Bore 10" x 1" x 3
    6" x 12" Used Mitsui Surface Grinder, Mdl. MSG-200SH, Lubrication System, Perman
    $3,750
    6" x 12" Used Mitsui Surface Grinder, Mdl. MSG-200SH, Lubrication System, Perman
    Capacity 6" x 12" Longitudinal Table Travel 17" Cross Table Travel 8" Table to Spindle Center 18" Height Under Wheel to Chuck 11" Grinding Wheel Size 8" x 3/4" x 1-1/4" Cross Feed per Rev. of Handwh
    6" x 12" Used Webb Heavy Duty Surface Grinder, Mdl. 612, 6" x 12" Perm
    $3,850
    6" x 12" Used Webb Heavy Duty Surface Grinder, Mdl. 612, 6" x 12" Perm
    Note: this machine appears to be a 6 by 18. The Chuck currently in the machine is smaller than the available capacity. WEIGHT 1,800 Lbs. Spindle to Top of Chuck 12" Made In Taiwan 6" X 12" Permanent Magen
    3/16" x 10' Used Elga Hydrapower Hydraulic Power Shear, Mdl. 10316, Front Operated Po
    $19,500
    3/16" x 10' Used Elga Hydrapower Hydraulic Power Shear, Mdl. 10316, Front Operated Po
    Max. Cutting Length 120" Back Gauge Front Operated Power Back Gauge with Indicator Back Gauge Range 27" Throat 13 1/2" Type Hydraulic Number of Hold Downs (Hydraulic) 13 Strokes Per MInute 21 Hor
    .060" - 6.5" Used Sunnen Power Stroker Honing Machine, Mdl. MBB-1801E, Power Str
    $10,950
    .060" - 6.5" Used Sunnen Power Stroker Honing Machine, Mdl. MBB-1801E, Power Str
    Max. Honing Length 16" Spindle Speeds (12) 200 - 2,500 RPM Stroke Rates 80 - 310 SPM Power Stroke Length 1/2" - 3" Honing Oil Capacity 25 Gallons Voltage 440V ~ 3 Phase Horsepower 1 H.P. Floor Sp
    Used Ramco Monoset Tool & Cutter Grinder, Mdl. UNOSET, Motorized Work Head, One Shot Lubri
    $4,950
    Used Ramco Monoset Tool & Cutter Grinder, Mdl. UNOSET, Motorized Work Head, One Shot Lubri
    Wheelhead Capacity Spindle Speeds (3) 4,000- 5,729- 8,000 RPM Grinding Wheel Size 4" Longitudinal Slide Travel 6" Vertical Slide Travel 9.50" Cross Slide Travel 7.50" Workhead Capacity: Speed 4
    11" Used N. Ferrara Motorized Metal Gang Slitter With Take Up, Mdl. , Foot Pedal, E-S
    $6,750
    11" Used N. Ferrara Motorized Metal Gang Slitter With Take Up, Mdl. , Foot Pedal, E-S
    Thickness Range .002"/.060" Slitting Width 11" Speed Range 50 to 80 F.P.M Stroke 2" Slitter Knife Diameter 4" Spacer Size 3" Take up 5-1/2" Entrance Table 15" WEIGHT 650 Lbs. Foot Pedal
    Used BMT Multi Barrel Slide Hone Finishing Mill, Flywheel Tumbler Deburring Machine, Mdl.
    $7,500
    Used BMT Multi Barrel Slide Hone Finishing Mill, Flywheel Tumbler Deburring Machine, Mdl.
    Barrels 6 None
    Used Kentrall Hardness Tensile Tester, Mdl. MC-2, Tooling, #A3607
    $425
    Used Kentrall Hardness Tensile Tester, Mdl. MC-2, Tooling, #A3607
    Work Table 6" x 10" Voltage 115V ~ 1 Phase Dimensions (W x L x H) 18" x 15" x 24" Tooling
    2.75" Used Eagle Tube End Former, Mdl. E2000, (6) EXTRA DIES, Allen Bradley SLC 500 P
    $9,950
    2.75" Used Eagle Tube End Former, Mdl. E2000, (6) EXTRA DIES, Allen Bradley SLC 500 P
    Tube Capacity 2.75" Max. Wall Thickness 0.080" Average Machine Cycle Time 4 - 6 Seconds Water Supply 3 - 5 GPM Hydraulic Pump 15 GPM Oil Reservoir Capacity 81 Gallons WEIGHT 1,650 LBS. (6) EXTR
    16 Ga. Used Marchant Foot Stretching & Shrinking Machine, Mdl. 6F, Set Of Stretching Jaws
    $2,450
    16 Ga. Used Marchant Foot Stretching & Shrinking Machine, Mdl. 6F, Set Of Stretching Jaws
    Jaw Opening 16 GA. WEIGHT 400 Lbs. Set Of Stretching Jaws
    60" Used Lodge & Shipley Right Angle T Lathe (Good Working Condition, Comes With Warr
    $19,500
    60" Used Lodge & Shipley Right Angle T Lathe (Good Working Condition, Comes With Warr
    Swing in Gap 60" Carriage Travel 52.5" Compound Travel 16" Hole Thru Spindle 11-1/2" Distance Face Plate to Carriage 16" Distance Face Plate to Compound 4.13" - 20.5" Spindle Speeds (24) 4 - 225 RPM
    7.5 KVA Used Rex Spot Welder With Long Arms, Mdl. 62FR, Foot Pedal, Rocker Arms, #A4077
    $2,250
    7.5 KVA Used Rex Spot Welder With Long Arms, Mdl. 62FR, Foot Pedal, Rocker Arms, #A4077
    KVA Rating 7.5 KVA Throat 30" Voltage 230V, 60CY Foot Pedal Rocker Arms
    11" x 18" Used Hardinge Precision Toolroom Turning, Facing, Boring Lathe, Mdl. T
    $12,500
    11" x 18" Used Hardinge Precision Toolroom Turning, Facing, Boring Lathe, Mdl. T
    Swing Over Carriage 9" Swing Over Cross Slide 6" Distance Between Centers 18" Spindle Speeds (Variable) 125- 3,000 RPM Spindle Nose 4 Degree Taper Hole Thru Spindle 1 1/4" Feeds (Variable) 1/4"- 7 I
    6,000 Lbs. x 48" Used Ransome Powered Welding Positioner, Mdl. , Foot Pedal, Push But
    $17,500
    6,000 Lbs. x 48" Used Ransome Powered Welding Positioner, Mdl. , Foot Pedal, Push But
    Capacity 6,000 LBS. Table Size 48" Tilting Range 0 - 135 Degrees Motorized Horsepower 3 H.P. x 2 Motors Voltage 460V ~ 3 Phase Dimensions (WxDxH) 110" x 89" x 74" Foot Pedal Power Tilt Power R
    1/8" - 5/16" Used Shuster Wire Straightener/Cutoff Machine, Mdl. 2A4V, Vari Spee
    $11,500
    1/8" - 5/16" Used Shuster Wire Straightener/Cutoff Machine, Mdl. 2A4V, Vari Spee
    Wire Diameter .125" - .312" Speed Range (Variable) 28 - 200 FPM Voltage 480V ~ 3 Phase WEIGHT 2,400 Lbs. Vari Speed Drive Straightening Head
    4.5" Used Conrac Hydraulic Tube Bender, Mdl. Digicon 255- SX, Digicon Digital Program
    $19,500
    4.5" Used Conrac Hydraulic Tube Bender, Mdl. Digicon 255- SX, Digicon Digital Program
    Capacity: Round Tubing 4.5" x 0.312" W.T. Pipe 4" IPS x Schedule 80 Bend Direction Clockwise Bend Radius: Centerline Max. Without Booster 12" Centerline Max. With Booster 6" Max. Bend Angle 180
    19-1/2" x 88" Used Kearney & Trecker Plain Type Horizontal Milling Machine W/ Un
    $7,950
    19-1/2" x 88" Used Kearney & Trecker Plain Type Horizontal Milling Machine W/ Un
    Table Size 80" x 20" Vertical Table Travel 21" Longitudinal Table Travel 42" Cross Table Travel 14" Speed Selector Variable Speed Spindle Speed (16) 15 - 1500 RPM Table Feeds 3/8" To 90 IPM Table
    1/16" - 3/16" Used Lewis Wire Straightener & Cut Off, Mdl. 2C3-829-6, Dies Inclu
    $12,500
    1/16" - 3/16" Used Lewis Wire Straightener & Cut Off, Mdl. 2C3-829-6, Dies Inclu
    Dimensions (L x W x H) 122" x 39" x 48" Capacity (High Carbon, Alloy Or Steel Wire 1/16" to 1/8" Speed Range 100 Feet Per Minute Cutting Lengths 3" to 7-1/2", Clutching 7-1/2" and Longer Shuttle Length 72
    SAJO PF-52 | Horizontal | Spindle Cat 40 |
    $RFQ
    SAJO PF-52 | Horizontal | Spindle Cat 40 |
    Horizontal 11" x 49" Table Spindle taper Cat 40 Speeds Manual feed x, y, z 220v / 3 Phases Weight 3240 lbs Dimensions 63"x58"x62"
    2012 CATERPILLAR D4K XL DOZER - W6645
    $57,000
    2012 CATERPILLAR D4K XL DOZER - W6645
    4 CYL CAT ENGINE, HYDRO-STATIC TRANS W/ JOYSTICK STEERING, 18 IN PADS, 9FT 6 WAY BLADE
    USED C FRAME PRESS 100 TON HANNIFIN HYDRAULIC
    $RFQ
    USED C FRAME PRESS 100 TON HANNIFIN HYDRAULIC
    100 TON HANNIFIN HYDRAULIC C FRAME PRESS Floor standing Bed area: 96" L-R x 21" F-B Stroke approx.: 18" maximum Throat depth: 15" Ram diameter: 7.5" Floor to top of bed: 41" Power un
    NEW CLEVELAND A3VHG VERTICAL KNEE MILL
    $RFQ
    NEW CLEVELAND A3VHG VERTICAL KNEE MILL
    **PLEASE CLICK ON LINK BELOW FOR BROCHURE/SPECIFICATIONS AND PICTURE** http://www.clevelandmachinery.com/pdf/N2869.pdf
    NEW CLEVELAND BM660H CNC VERTICAL BED MILL
    $RFQ
    NEW CLEVELAND BM660H CNC VERTICAL BED MILL
    **PLEASE CLICK ON LINK BELOW FOR BROCHURE/SPECIFICATIONS AND PICTURE** http://www.clevelandmachinery.com/pdf/n2986.pdf
    NEW CLEVELAND MODEL #D2202 DOUBLE COLUMN VERTICAL MACHINING CENTER D2202
    $RFQ
    NEW CLEVELAND MODEL #D2202 DOUBLE COLUMN VERTICAL MACHINING CENTER D2202
    **PLEASE CLICK ON LINK BELOW FOR BROCHURE/SPECIFICATIONS AND PICTURE** http://www.clevelandmachinery.com/pdf/N2999.pdf
    NEW SAMSTAR CYLINDRICAL GRINDER MODEL #ME1432B
    $RFQ
    NEW SAMSTAR CYLINDRICAL GRINDER MODEL #ME1432B
    Cylindrical, OD/ID
    USED G & L ROTARY TABLE 60" X 72" HYDROSTATIC
    $RFQ
    USED G & L ROTARY TABLE 60" X 72" HYDROSTATIC
    CAPACITY: 60" X 72"HYDROSTATIC 360 DEGREE MANUAL ROTATION (6) 1" T-SLOTS CLAMPING 4 CORNERS ANY DEGREE 90 DEGREE SHOT PIN 19" BASE TO TOP 30,000LB CAPACITY
    USED T-SLOTTED FLOOR PLATE 96"W X 240"L X 12"H
    $RFQ
    USED T-SLOTTED FLOOR PLATE 96"W X 240"L X 12"H
    T-SLOTTED FLOOR PLATE 96"W X 240"L X 12"H 8 T-SLOTS 1-3/8"
    USED MIGHTY COMET MV-6 CNC BED MILL WITH DELTA DYNAPATH CONTROL
    $RFQ
    USED MIGHTY COMET MV-6 CNC BED MILL WITH DELTA DYNAPATH CONTROL
    Table size 13" x 49-1/2" Maximum table load 1500 lbs. Range: longitudinal (X) 40"            cross (Y) 20"     &#
    USED HECKERT UNIVERSAL MILL WITH H.D. VERTICAL MILLING ATTACHMENT
    $RFQ
    USED HECKERT UNIVERSAL MILL WITH H.D. VERTICAL MILLING ATTACHMENT
    TABEL WORKING SURFACE: 10 1/2" X 49 1/2" LONGITUDINAL:34 " CROSS: 12" VERTICAL:20 " TAPER IN BOTH SPINDLES: #40 SPINDLE SPEED RANGE: 45-2240 RPM 18 SELECTIONS LONGITUDINAL & CROSS FEED
    • Table width: 10.5"
    • Table length: 49.5"
      amada RG-50 press brake
      $25,000
      amada RG-50 press brake
      amada press brake RG-50
      • Tonnage: 55T
        USED ACRA CNC Vertical Machining Center
        $RFQ
        USED ACRA CNC Vertical Machining Center
        Mitsubishi Meldas CNC Control Full Enclosure 16 Tool Carousel Rigid Box Ways Worklight AC Digital Drives Pilot Lamp Ribbed Castings Levelling Bolts and Pads No Table Overhang Manuals, toolbox TABLE: Overall
        USED Mighty Comet CNC Vertical Machining Center,
        $RFQ
        USED Mighty Comet CNC Vertical Machining Center,
        Table Size - 25" x59" X-Travel - 58" Y-Travel - 28.5" Z-travel - 24.5" Spindle Motor - 20 HP GEAR HEAD Spindle Speeds - 50 to 4000 RPM Max Cutting Feed Rate - 393 IPM Rapid Traverse Rate -
        • X axis: 58"
        • Y axis: 28.5"
          USED Hurco CNC VMC 40SLV SPIRIT
          $RFQ
          USED Hurco CNC VMC 40SLV SPIRIT
          With 24 Tool Changer Z Digital Readout Overall Table Size 23.7" x 55.2" Working Surface 19.7" x 47.2" Slotted Table Table Load Capacity 1100 Lbs. Travels: X-Axis Travel 40 " Y-Axis Trave
          • X axis: 40"
          • Y axis: 20"
            USED SAMSTAR HEAVY DUTY 32 X 120 LATHE
            $RFQ
            USED SAMSTAR HEAVY DUTY 32 X 120 LATHE
            HEAVY DUTY ONE PIECE CONSTRUCTION HARDENED & GROUND BED WITH GAP 4-3/16" SPINDLE BORE ELECTRO-MAG CLUTCH & BRAKE SYSTEM HARDENED AND GROUND WAYS 6 WAY RAPID TRAVERSE 3 JAW CHUCK 4 JAW CHUCK FACE PLAT
            USED MONARCH HEAVY DUTY LATHE 49" X 84"
            $RFQ
            USED MONARCH HEAVY DUTY LATHE 49" X 84"
            32" 4 Jaw Chuck Sony Digital Readout on Carriage Travel D1-11 Camlock Spindle 30 HP 220/440 Main Motor 48 Feeds .006 - .363 Thread Dial 32" Wide Bed Dorian Quick Change Toolpost with Holders
            USED Hardinge Cobra 65 CNC LATHE, Fanuc 21i-TA, Tailstock
            $RFQ
            USED Hardinge Cobra 65 CNC LATHE, Fanuc 21i-TA, Tailstock
            USED Hardinge Cobra 65 CNC LATHE, Fanuc 21i-TA, Tailstock Swing diameter over upper way cover (max) 22.00"/558.8mm Z-Axis travel (maximum) ................. 31.00"/787.4mm 10" Jaw chuck Spindle co
            • Swing: 22"
              USED DENVER ASTRO II MONOSET TOOL GRINDER
              $RFQ
              USED DENVER ASTRO II MONOSET TOOL GRINDER
              (ASTRO II) ... Swing Over Table............................. 12" Dist. Between Tailstock & Workhead........... 15" Work Head Spindle Tapers..................... 5C Table Working Surface................
              Amada FBD-8025-E
              $34,000
              Amada FBD-8025-E
              1995 Amada FBD-8025-E good working
              • Tonnage: 88T
                USED GER / K.O. LEE CNC SURFACE GRINDER
                $RFQ
                USED GER / K.O. LEE CNC SURFACE GRINDER
                K.O. LEEMATIC 7000 CNC CONTROL 12" X 30" MAXIMUM CAPACITY WITH 10" X 24" SUBURBAN PERMANENT MAGNETIC CHUCK 12" DIAMETER GRINDING WHEEL CAPACITY VARIABLE SPEED SPINDLE WITH AC TECH MODEL SCF
                USED MATTISON 14" X 96" HORIZ SURFACE GRINDER SQUARE COLUMN
                $RFQ
                USED MATTISON 14" X 96" HORIZ SURFACE GRINDER SQUARE COLUMN
                Magnetic Chuck: (2x) 14" x 40" Wheel Diameter: 20" Wheel Width: 6" Wheel ID: 10" Spindle Power: 30 HP 1150 RPM Square Column Twin Magnetic Chucks Power Increme
                amada
                $35,000
                amada
                1993 Amada press brake call 216 214 6600
                • Tonnage: 88T
                  5" SPINDLE GIDDINGS & LEWIS CNC HORIZONTAL BORING MILL
                  $RFQ
                  5" SPINDLE GIDDINGS & LEWIS CNC HORIZONTAL BORING MILL
                  5" SPINDLE DIAMETER G & L "NUMERIPOINT" M-400 CONTROL WITH CRT ON PENDANT - MANUAL CONTROL #50 TAPER W/POWER DRAW BAR PENDANT CONTROL SPINDLE SPEEDS 6 TO 1120 RPM FEEDS- 0.0492 In -139.76 IPM H
                  • Spindle diameter: 5"
                  • X axis travel: 84"
                    2000 Zieman 2660 Beaver Tail Equipment Trailer
                    $13,900
                    2000 Zieman 2660 Beaver Tail Equipment Trailer
                    22 ft flat deck w/ 4 ft beaver tail spring loaded 5.5 ft ramps 6 D-rings each side LED lights Bucket rest Wheel chocks Steel/Hardwood reinforced deck Ex Utility company owned Matching Firestone tires Very clean
                    MICRON MICRO-VR MODULAR CNC GRINDER
                    $RFQ
                    MICRON MICRO-VR MODULAR CNC GRINDER
                    MICRON MICRO-VR MODULAR CNC GRINDER<br /> <br /> New 2004<br /> <br /> This Grinder is Based on the Utilization of Micro Modular CNC Grinding which is designed for Creep Feed and HEDG Grinding App
                    2005 Hwacheon Hi-TECH 200CL 11 HP 3.5K RPM 10" Chuck CNC Lathe (SOLD)
                    $27,900
                    2005 Hwacheon Hi-TECH 200CL 11 HP 3.5K RPM 10" Chuck CNC Lathe (SOLD)
                    Sold if you have a similar machine for sale then do please let us know. 2005 Hwacheon Hi-TECH 200CL 11 HP 3.5K RPM 10" Chuck CNC Lathe with Fanuc Oi-TB Control Please wait for your shipping quote and invoice bef
                    2001 Gehring BRH1 Roller Bearing Finishing Honing Machine
                    $7,000
                    2001 Gehring BRH1 Roller Bearing Finishing Honing Machine
                    2001 Gehring BRH1 Roller Bearing Finishing Honing Machine Please wait for your invoice or shipping quote before sending us money EZSystems Machine Reference Number: EZ8201 Machine Type: Bearing Race Grinder T
                    • Maximum diameter: 72"
                    • Stroke: 72"
                      2012 CATERPILLAR D3K 2 LGP DOZER - W6704
                      $60,500
                      2012 CATERPILLAR D3K 2 LGP DOZER - W6704
                      4 CYL CAT ENGINE, HYSTAT TRANS W/ JOYSTICK STEERING, 25 IN PADS, 6 WAY BLADE (10 FT 6 IN WIDE), REAR SCREENS, HEAT, 4776 HRS SHOWING
                      1995 CATERPILLAR D8N DOZER - E6705
                      $71,500
                      1995 CATERPILLAR D8N DOZER - E6705
                      6 CYL CAT ENGINE, 3 SPD TRANS W/ DIFF STEERING, 24 IN PADS, ANGLE BLADE (15 FT 3 IN WIDE), SWEEPS, REAR SCREENS, 3329 HRS SHOWING
                      KOIKE ARONSON MASTERGRAPH MGX 2500 PLASMA CUTTING / BURNING TABLE
                      $140,000
                      KOIKE ARONSON MASTERGRAPH MGX 2500 PLASMA CUTTING / BURNING TABLE
                      Brand: Koike Aronson Model: Mastergraph MGM 2500 Cutting Dimensions: 10' x 50' Serial: 45387 Year: 2008 Includes: Hypertherm HPR260 Hypertherm Edgepro Control Autogas Console Hypertherm Plasm
                      24" X 24" AMADA H-600 SEMI-AUTOMATIC POST TYPE HORIZONTAL BAND S
                      $RFQ
                      24" X 24" AMADA H-600 SEMI-AUTOMATIC POST TYPE HORIZONTAL BAND S
                      24" X 24" AMADA H-600 SEMI-AUTOMATIC POST TYPE HORIZONTAL BAND SAW S/N 555084 NEW 1980 CAPACITY --------- ( SQUARE ) ------------- 24" X 24"
                      • Width capacity: 24"
                      • Height capacity: 24"
                        Trumpf L3050 5000 Watt Laser - Refurbished in 2017
                        $159,500
                        Trumpf L3050 5000 Watt Laser - Refurbished in 2017
                        Trumpf L3050 5000 Watt Laser - Refurbished in 2017 Year: 2004 Laser Output: 5,000 Watts Number of Pallets: 2 Work Area: 5' x 10' Max. Material Thickness: 1" (Mild Steel); .79" (Stainless
                        • Wattage: 5000W
                          6.3" Wotan Cutmax CNC Table Type Horizontal Boring Mill
                          $RFQ
                          6.3" Wotan Cutmax CNC Table Type Horizontal Boring Mill
                          Reference #28704 6.3" Wotan Cutmax CNC Table Type Horizontal Boring Mill Age 1987 Rebuilt & Retrofit 2004 Model: Cutmax 3PT-160S FEATURES: Siemens 840D CNC New 2004 80-Station Automatic Tool Chang
                          • Spindle diameter: 6.3"
                          • X axis travel: 137.79"
                            14 Stand BRADBURY Roll Former, $69,500
                            $69,500
                            14 Stand BRADBURY Roll Former, $69,500
                            Model #415RF Serial #21086 Year: 1990 Driven Stands: 14 Spindle Dia.: 2.5" Roll Space: 42" Vertical Adjustment: 4"- 7.25" Horizontal Centers: 13.5" Center Line of Lower Spindle to Base: 6" Direction: L-R Equipp
                            • # Stands: #14
                            • Roll diameter: 2.5"
                              50 Ton, YODER P50, 4-post, cut off
                              $RFQ
                              50 Ton, YODER P50, 4-post, cut off
                              STOCK #1308 Max OD: 2.5" Max Wall: .095" Max Sheet Width: 36" Cutting Stroke: 5" Max Strokes/Min.: 50 Max Stock Speed: 150 FPM Bottom Die Rails: 58.5" x 6" Post Diameter: 3.75" Distance Between Posts: 40.5" L-R,
                              • Tonnage: 50T
                              • Stroke: 5"
                                Lubow MGW 25 Multi Head Welder
                                $RFQ
                                Lubow MGW 25 Multi Head Welder
                                No description providedNumber of Welding Heads16 Number of Transformers8 Transformer KVA90 KVA X8 Bed Openining72" Welding Head Max. Width@66" Interlock Model 108 BLD
                                1998 CHARMILLES ROBOFORM 20A CNC RAM TYPE SINKER EDM, 32 AMP
                                $RFQ
                                1998 CHARMILLES ROBOFORM 20A CNC RAM TYPE SINKER EDM, 32 AMP
                                SPECIFICATIONS WORK TANK SIZE: 25” X 17” X 19” TABLE WORKING SURFACE: 15.7”X 11.8” X-AXIS TRAVEL: 11.81” Y-AXIS TRAVEL: 9.85 HEAD VERTICAL TRAVEL: 9.85” TOOL CHANGER TYPE: RACK DIELECTRIC FLUID CAPACITY: 55 GALL
                                • Power: 32A
                                • Table width: 15.7"
                                  1998 ACRA MODEL ASG-1224HS 3-AXIS AUTOMATIC SURFACE GRINDER, 12" X 24&
                                  $RFQ
                                  1998 ACRA MODEL ASG-1224HS 3-AXIS AUTOMATIC SURFACE GRINDER, 12" X 24&
                                  SPECIFICATIONS TABLE SIZE: 12” X 24” MAXIMUM TABLE TRAVEL: 14.5” X 27.5” MAXIMUM SURFACE GROUND: 12” X 24” TABLE TO SPINDLE CENTER: 25” GRINDING WHEEL SIZE: 14" X 1.5" X 5" TABLE SPEED: 16 – 82 FPM
                                  • Table width: 24"
                                  • Table length: 12"
                                    1999 CHARMILLES MODEL HD-8 HOLE DRILLING EDM MACHINE, 13.8" X 9.8"
                                    $RFQ
                                    1999 CHARMILLES MODEL HD-8 HOLE DRILLING EDM MACHINE, 13.8" X 9.8"
                                    SPECIFICATIONS DRILLING CAPACITY: .0118” - .266” WORKTABLE SIZE: 23.6” X 11.8” TABLE LOAD CAPACITY: 880 LBS X-AXIS TRAVEL: 13.8” Y-AXIS TRAVEL: 9.8” Z-AXIS TRAVEL: 13.8” MAXIMUM WORKPIECE DIMENSIONS: 25.5” X 1
                                    • Minimum hole diameter: 0.012"
                                    • Maximum hole diameter: 0.226"
                                      SJP 16 pass Corrugated Panel
                                      $RFQ
                                      SJP 16 pass Corrugated Panel
                                      7/8" x 2.67" rib Corrugated Panel Rollform Line. 10,000lb Powered Uncoiler, Powered ID: 17" - 21" 16 pass Rollform mill tooled for Corrugated Air Press Flying Shear Operator Control Station, AMS
                                      • # Stands: #16
                                        SJP 16 pass Corrugated Panel
                                        $RFQ
                                        SJP 16 pass Corrugated Panel
                                        7/8" x 2.67" rib Corrugated Panel Rollform Line. 10,000lb Powered Uncoiler, Powered ID: 17" - 21" 16 pass Rollform mill tooled for Corrugated Air Press Flying Shear Operator Control Station, AMS
                                        • # Stands: #16
                                          SJP 16 pass Corrugated Panel
                                          $RFQ
                                          SJP 16 pass Corrugated Panel
                                          7/8" x 2.67" rib Corrugated Panel Rollform Line. 10,000lb Powered Uncoiler, Powered ID: 17" - 21" 16 pass Rollform mill tooled for Corrugated Air Press Flying Shear Operator Control Station, AMS
                                          • # Stands: #16
                                            2011 CATERPILLAR D6T LGP DOZER - E6673
                                            $115,500
                                            2011 CATERPILLAR D6T LGP DOZER - E6673
                                            6 CYL CAT ENGINE, 3 SPD TRANS W/ DIFF STEERING, 36 IN PADS, 13FT 2IN S/TILT BLADE, 3RD VALVE, ENCLOSED CAB W/ A/C & HEAT
                                            MUD REMOVER From The Cottage´s Lake.
                                            $2,700
                                            MUD REMOVER From The Cottage´s Lake.
                                            Handy new in the factory made hydraulic device for removing mud from the cottages´s lake or equivalent. The device is the main part of the system you need. In addition you need a small size (6x10 feet) light ferry a
                                            Pratt & Whitney OK R8 Linear Bearing Radius Tool & Cutter Grinder
                                            $RFQ
                                            Pratt & Whitney OK R8 Linear Bearing Radius Tool & Cutter Grinder
                                            Pratt & Whitney OK R8 Linear Bearing Radius Tool & Cutter Grinder "Excellent Condition Very Clean" Includes Workhead and Collets. For More Information Please Call Mickey at 760-662-9299 or Emai
                                            Kearney & Trecker 5:1 Dividing Head
                                            $RFQ
                                            Kearney & Trecker 5:1 Dividing Head
                                            *****Excellent Condition***** Kearney & Trecker 5:1 Dividing Head 50 Taper For More Information Please Call Mickey at 760-662-9299 or Email: [email protected]
                                            Used Hammond DusKolector Model DK-1255
                                            $2,500
                                            Used Hammond DusKolector Model DK-1255
                                            Used Hammond DusKolector Model DK-1255. Ser# 13774. 10HP 230/460 volt 3 phase (wired 230) 25.6/12.8 amps. Cyclone style dust collector with single drum and Oneida 4 cartridge after filter with 2 drum storage. Approx
                                            Amada SP-30 | Hydraulic | 30 Tons |
                                            $RFQ
                                            Amada SP-30 | Hydraulic | 30 Tons |
                                            Hydraulic Capacity: 30 Tons Bed 40" x 15"
                                            Whitney 635-A | Hydraulic | 30 Tons |
                                            $RFQ
                                            Whitney 635-A | Hydraulic | 30 Tons |
                                            Hydraulic 30 Tons Bed: 96" x 57" 10 HP 440v / 3 Phases Dimensions: 86" x 150" x 74"
                                            HANSVEDT SM-150B EDM, 20 Amp, DIELECTRIC OIL SYSTEM
                                            $RFQ
                                            HANSVEDT SM-150B EDM, 20 Amp, DIELECTRIC OIL SYSTEM
                                            HANDSVEDT RAM TYPE EDM SPECIFICATIONS: WORK TABLE......................... 15" X 9" TANK SIZE.......................... 24" X 16" X 11.5" LONGITUDINAL TABLE TRAVEL.......... 8"
                                            • Power: 20A
                                            • Table width: 40"
                                              #20 Robertson/Hartford 20-225 Automated Flat Die Thread Roller
                                              $RFQ
                                              #20 Robertson/Hartford 20-225 Automated Flat Die Thread Roller
                                              No description providedScrew Diameter Capacity1/4" thru 1/2" Thread Length Capacityto 3" Thread Length (Maximum)1-1/2" @ Maximum Diameter Maximum Shank Length4" Production Rates135 to 225 PPM Die Pocket Depth3-1/8" Flat
                                              • Maximum workpiece diameter: 0.5"
                                              • Maximum workpiece diameter: 0.5"
                                              • Maximum thread length: 3"
                                                42" Widebelt Orbital Sander
                                                $10,000
                                                42" Widebelt Orbital Sander
                                                This Sander is in rebuilt condition! We are liquidating our business and no longer have use for it! Works great for cabinet doors!
                                                248" CKX CNC Vertical Boring Mill with Live Spindle
                                                $RFQ
                                                248" CKX CNC Vertical Boring Mill with Live Spindle
                                                Reference #28360 248" CKX CNC Vertical Boring Mill with Live Spindle Age: 2009 Model: 5280 x40/160 FEATURES: Siemens 840DE CNC Control .001 Degree C-Axis w/ Heidenhain Rotary Encoder Turning, Milling, D
                                                • Swing: 248.03"
                                                  48" x .075" x 20,000Lb Braner Slitting Line
                                                  $RFQ
                                                  48" x .075" x 20,000Lb Braner Slitting Line
                                                  Make: Braner Material Width: 12" - 50" Material Thickness: .010" - .075" Coil Weight: 20,000Lb Coil ID: 20" - 24" Coil OD: 60" Type: Pull - Thru Direction: Right to Left E
                                                  • Maximum workpiece width: 50"
                                                  • Maximum workpiece thickness: 0.075"
                                                    Century Viper GT R-12/R-134a Air Conditioning AC Recovery/Recycle/Recharge
                                                    $1,750
                                                    Century Viper GT R-12/R-134a Air Conditioning AC Recovery/Recycle/Recharge
                                                    Century Viper GT R-12/R-134a Air Conditioning AC Recovery/Recycle/Recharge Stock #RS-0409 Model #Viper VRGT- - Serial #651595 Viper GT R-12 & R134a Recovery/Recycle/Recharge Unit 115v Features: •
                                                    HARDINGE/BRIDGEPORT #GX1000-OSP CNC VERTICAL MACHINING CENTER
                                                    $RFQ
                                                    HARDINGE/BRIDGEPORT #GX1000-OSP CNC VERTICAL MACHINING CENTER
                                                    HARDINGE/BRIDGEPORT #GX1000-OSP CNC VERTICAL MACHINING CENTER BUILT 2011, INSTALLED 2012 S/N NVCB1B-0033 NEW 2011 TABLE SIZE -------------------------------
                                                    • X axis: 40.16"
                                                    • Y axis: 21"
                                                      Categories:
                                                      Condition:
                                                      Manufacturer:
                                                      Location:
                                                      Price:
                                                      •  to 
                                                      <Prev | 101 | 102 | 103 | 104 | 105 | 106 | 107 | 108 | 109 | 110 | Next>