buy & sell, new & used machinery, machine tools & equipment

<Prev | 101 | 102 | 103 | 104 | 105 | 106 | 107 | 108 | 109 | 110 | Next>
Refine: Viewing 10201 - 10300 of 20798 matches
Sort by:
Items Per Page:  20 |  50 |  100
Best 960 Radial Arm Saw
$4,392
Best 960 Radial Arm Saw
The Best 960 radial arm saw offers adaptability, versatility, precision and durability to shops of all sizes. THREE PHASE MOTOR POWER 4 (3) Hp (Kw) SINGLE PHASE MOTOR POWER 3 (2.2) Hp (Kw) MOTOR SPEED 3360 DIAME
Junior 640 Radial Arm Saw
$3,832
Junior 640 Radial Arm Saw
The Junior 640 radial arm saw offers adaptability, versatility, precision and durability to shops of all sizes. Heavy castings and the eight bearing saw carriage makes this machine very accurate and rigid. THREE PHAS
3/8" Patterson Wire Straighten And Cut Machine
$RFQ
3/8" Patterson Wire Straighten And Cut Machine
No description providedMaximum Wire Diameter.375" (3/8") Maximum Cutoff Length6' Speed Range50 - 250 FPM Lots Of Tooling
VECTRAX MODEL GS-20V VERTICAL MILL, 10" X 54"
$RFQ
VECTRAX MODEL GS-20V VERTICAL MILL, 10" X 54"
SPECIFICATIONS TABLE SIZE: 10” X 54” TRAVERSE LONGITUDINAL TRAVEL (X-AXIS): 31.75” CROSS TRAVEL (Y-AXIS): 16.2” KNEE TRAVEL: 19” RAM TRAVEL: 18” HEAD MAIN MOTOR: 3 HP SPINDLE TAPER: R-8 SPINDLE SPEEDS (L
  • Table width: 10"
  • Table length: 54"
    DMG GildeMeister CTX-510 CNC Turning Center
    $49,500
    DMG GildeMeister CTX-510 CNC Turning Center
    DMG GILDEMEISTER CTX-510 CNC TURNING CENTER Make: DMG GILDEMEISTER Model No.: CTX-510 Serial No.: 943070 Year: 2005 Condition: Very Good Comes with 15" Chuck, Steady Rest, Tailstock, Books &
    • Swing: 26.77"
    • Centers: 45.27"
      60" x 30,000Lb McKay Uncoiler
      $RFQ
      60" x 30,000Lb McKay Uncoiler
      Make: McKay Model: 69-3903-11 Mandrel Width: 69" Weight Capacity: 30,000Lb Coil ID: 20" Coil OD: 72" Powered Hold-Down Roll Hydraulic Mandrel Expansion AC Feed-Up Motor Air Cooled Brake Sel
      • Maximum weight capacity: 30000Lb
      • Maximum coil width: 60"
        10 Stand x 1-1/8" x 6" LOCKFORMER Roll Former
        $RFQ
        10 Stand x 1-1/8" x 6" LOCKFORMER Roll Former
        Serial #SO-1383 Stands: 10 Direction: R-L Roll Shaft Dia: 1.125" Roll Space: 6" Center, 2.5" Outsides Horizontal Centers: 6" Vertical Center: 3.5" Base to Lower Shaft: 3.25" Shaft Keyway Size: .25" Capacity: 20
        28 Stands Tishken Duplex Roll Former
        $RFQ
        28 Stands Tishken Duplex Roll Former
        Make: Tishken Year New: 1996 Serial # 21490 Number of Stands: 28 Spindle Diameter: 3" Maximum Material Thickness: .148" Roll Space: 30" - 40" Upper Spindle Adjustment: 6.5" - 8-3/8&quo
        • # Stands: #28
        • Roll diameter: 3"
          CLAUSING KONDIA FV-1 2-AXIS CNC VERTICAL MILL WITH PROTOTRAK MX-2 CONTROL
          $RFQ
          CLAUSING KONDIA FV-1 2-AXIS CNC VERTICAL MILL WITH PROTOTRAK MX-2 CONTROL
          SPECIFICATIONS TABLE TABLE SIZE: 9” X 48” T-SLOT: 5/8" X 3" X 2-9/16" TABLE LOAD CAPACITY: 880 LBS TRAVEL LONGITUDINAL TRAVEL: 36" SADDLE TRAVEL: 15" KNEE TRAVEL: 16.5" RAM
          2012 CATERPILLAR D3K2 XL DOZER - E6735
          $52,500
          2012 CATERPILLAR D3K2 XL DOZER - E6735
          4 CYL CAT ENGINE, HY-STAT TRANS W/ JOYSTICK STEERING, 16 IN PADS, RECENTLY INSTALLED NEW TOP & BOTTOM ROLLERS, 6 WAY BLADE (8 FT 7 IN WIDE), 3RD VALVE FOR RIPPER, HEAT, 3068 HRS SHOWING
          2007 CATERPILLAR CB534DXW ROLLER - E6738
          $37,000
          2007 CATERPILLAR CB534DXW ROLLER - E6738
          4 CYL CAT ENGINE, 2 SPD TRANS, DUAL 79 IN SMOOTH DRUM, DRUM DRIVE, VARIABLE VIBRATION, WATER SYSTEM, FRONT AND REAR SPRAY BARS, OROPS
          2007 INGERSOLL RAND PT125R ROLLER - E6740
          $35,500
          2007 INGERSOLL RAND PT125R ROLLER - E6740
          4 CYL CUMMINS ENGINE, HYDRO-STATIC TRANS, 4 FRONT WHEELS, 5 REAR WHEELS, 7.50-15 TIRES, PRESSURIZED 100 GAL WATER TANK, FRONT AND REAR SPRAY BARS, OROPS, 2388 HRS SHOWING
          2004 INGERSOLL RAND PT-125R ROLLER - E6741
          $32,000
          2004 INGERSOLL RAND PT-125R ROLLER - E6741
          4 CYL CUMMINS ENGINE, HYDRO-STATIC TRANS, 4 FRONT WHEELS, 5 REAR WHEELS, 7.50-15 TIRES, PRESSURIZED 100 GAL WATER TANK, FRONT AND REAR SPRAY BARS, OROPS
          *NEW* 149 Ton x 10.17' Ermak Speed Bend CNC Press Brake
          $RFQ
          *NEW* 149 Ton x 10.17' Ermak Speed Bend CNC Press Brake
          Specifications Capacity 149 Tons Overall Bending Length 122" Distance Between Columns 102.4" Throat 16.1" Daylight 21.7" Stroke 10.8" Approach Speed 7.87 IPS Bending Speed .47 IPS Retu
          • Tonnage: 149T
            HAAS VF3 VERTICAL MACHINING CENTER W/PALLET CHANGER UMBRELLA STYLE TOOL CHA
            $RFQ
            HAAS VF3 VERTICAL MACHINING CENTER W/PALLET CHANGER UMBRELLA STYLE TOOL CHA
            HAAS VF3 VERTICAL MACHINING CENTER W/PALLET CHANGER UMBRELLA STYLE TOOL CHANGER MFG:2006
            RMG Uncoiler Model 1216-02
            $RFQ
            RMG Uncoiler Model 1216-02
            No description providedMaximum Coil Weight4,000 lbs Maximum Wire Size (Alloy).750" Maximum Wire Size (Mild Steel)1" Maximum Rod Size (Alloy).50" Maximum Rod Size (Mild Steel).63" Mandrel Length6' Prefeeding Speed30 FPM E
            3" x .197″ BRONX #6CR 4-1/2 BW Straightener
            $RFQ
            3" x .197″ BRONX #6CR 4-1/2 BW Straightener
            6-Roll, Vertically Opposed Cross Roll Design OD Range: .394"-2" Max Wall Thickness: .197" Max OD Admitted: 3" Direction: R-L Roll Size: 4" Diameter x 8" Long Manual Roll Adjustment: 3" Approx Speed: 60–120 MPM
            OKUMA CROWN L1060 CNC TURNING CENTER
            $RFQ
            OKUMA CROWN L1060 CNC TURNING CENTER
            OKUMA CROWN L1060 CNC TURNING CENTER S/N 1531 NEW 1999 SWING OVER BED ------------------------------- 21.65" MAXIMUM OVER CARRIAGE --------------------- 15.75" MAXIMUM TURNING
            • Swing: 21.65"
              Kearney and Trecker or Milwaukee 40:1 Dividing Head
              $RFQ
              Kearney and Trecker or Milwaukee 40:1 Dividing Head
              ****Excellent Condition***** 40:1 - K & T or Milwaukee Dividing Head Runs Smoothly For More Information Please Contact Mickey at 760-662-9299 or Email: [email protected]
              2013 BOBCAT E80A EXCAVTOR - E6727
              $59,500
              2013 BOBCAT E80A EXCAVTOR - E6727
              4 CYL YANMAR ENGINE, 18 IN RUBBER TRACKS, 24 IN BUCKET, MANUAL QUICK CONNECT, BLADE 7 FT 6 IN WIDE, PLUMBING ON STICK, PATTERN CHANGER, ENCLOSED CAB W/ A/C & HEAT. SHOWING 1743 HOURS.
              2001 JOHN DEERE 770CH MOTOR GRADER - E6729
              $65,500
              2001 JOHN DEERE 770CH MOTOR GRADER - E6729
              6 CYL JD ENGINE, 8 SPD TRANS, BLADE (14 FT), REAR RIPPER, 14.00R24 TIRES, ENCLOSED CAB W/ A/C & HEAT, 7364 HRS SHOWING
              125" x 629" Mackintosh-Hemphill 3-Way Bed Engine Lathe
              $RFQ
              125" x 629" Mackintosh-Hemphill 3-Way Bed Engine Lathe
              Reference #28706 Mackintosh-Hemphill 125" x 629" 3-Way Bed Engine Lathe Retrofit: 2012 FEATURES: Machine was Fully Retrofit in 2012 Fanuc 21i CNC Control CAPACITIES: Maximum Swing Over Carriag
              • Swing: 125.98"
              • Centers: 629.92"
                1600mm x 20mm UBR Sheet Leveler
                $RFQ
                1600mm x 20mm UBR Sheet Leveler
                Make: UBR WMW Gotha (Germany) Maximum Material Width: 1600mm Material Thickness: 4mm - 20mm Number of Work Rolls: 11 Work Roll Diameter: 180mm Up & Down Back-Up Flights Speed: 10 meters per minute Motor:
                • Width: 64"
                • Thickness: 0.787"
                  MTR CNC, Turn-Mill Index Table w/Siemens 840 D CNC, 200 ton table capacity.
                  $RFQ
                  MTR CNC, Turn-Mill Index Table w/Siemens 840 D CNC, 200 ton table capacity.
                  MTR CNC, Turn-Mill Index Table Stock#: 60395-SB Year: New 2006 Specifications: Table diameter: 16 ft. Table height: 45” Table Capacity: 200 Ton Bearing: Hydrostatic Track Diameter: 116” Dual Track
                  Press Machine| Stroke 10" |
                  $RFQ
                  Press Machine| Stroke 10" |
                  Press Machine Stroke 10" Bed 10" x 59" Dimensions 75" x 75" x 106" *without hydraulic unit
                  • Stroke: 10"
                    1-1/2″ x .120″ PINES #1 Horizontal Tube Bender
                    $RFQ
                    1-1/2″ x .120″ PINES #1 Horizontal Tube Bender
                    SERIAL #11040–71236 YEAR: 1971 Round Tube: • Max OD: 1.5" (38.1 mm) • Max Wall: .109" (2.76 mm) • 1" (25.4 mm) Schedule 80 Steel • Max Yield Pressure: 40,000 PSI Square Tube: • Max OD: 1.125" (28.5 mm) • Max W
                    3/8" RMG 67 25190-90 Wire Drawer
                    $RFQ
                    3/8" RMG 67 25190-90 Wire Drawer
                    No description providedMaximum Wire Diameter (Alloy).312" Motor25 HP Maximum Speed190 FPM Capstan Diameter28" Maximum Wire Diameter (Mild Steel).375" (3/8") <span s
                    • Block diameter: 0.375"
                    • Block diameter: 0.375"
                      96" x 60,000Lb P/M Double Mandrel Uncoiler
                      $RFQ
                      96" x 60,000Lb P/M Double Mandrel Uncoiler
                      Make: P/M (Production Machinery) Serial # 145-150 Weight Capacity: 60,000Lb Material Width: 6" - 96" Dual Expandable Mandrels Dual Sliding Base Powered Hold-Down Rolls One Mandrel was Recently Painte
                      • Maximum weight capacity: 60000Lb
                      • Maximum coil width: 96"
                        10 TON POWER TEAM HYDRAULIC H-FRAME PRESS
                        $RFQ
                        10 TON POWER TEAM HYDRAULIC H-FRAME PRESS
                        10 TON POWER TEAM HYDRAULIC H-FRAME PRESS Stock # K14140 EQUIPPED WITH: H-Frame Design, Power Team R10-6SA Hydraulic Cylinder, Power Team HF-32 Hydraulic Pump, 2-Speed Hydraulic Hand
                        • Tonnage: 10T
                        • Stroke: 6"
                          72" x 60,000Lb Aetna - Standard Uncoiler
                          $RFQ
                          72" x 60,000Lb Aetna - Standard Uncoiler
                          Make: Aetna-Standard Mandrel Width: 84" Weight Capacity: 60,000Lb Coil ID: 24" Coil OD: 72" Powered Mandrel Expansion Sliding Base Motirized Brake Feed-Up Motor Drive
                          • Maximum weight capacity: 60000Lb
                          • Maximum coil width: 72"
                            72" x .135" Bronx 4-Hi Precision Leveler
                            $RFQ
                            72" x .135" Bronx 4-Hi Precision Leveler
                            Make: Bronx Material Width: 12" - 72" Material Thickness: .020" - .135" Work Roll Diameter: 1.75" Work Roll Width: 77" Number of Work Rolls: 19 Number of Back-Up Flights: 9 Driven
                            • Width: 72"
                            • Thickness: 0.135"
                              61' Steel I-beam bridge
                              $8,500
                              61' Steel I-beam bridge
                              61' span steel I-beam bridge frame with 5 cross pieces. I-beams measure 3'x12". Bolts and nuts fasteners included. Width of span stringers center to center will accommodate the wheel base of a ten yard du
                              3/16" National Single Stroke Solid Die Cold Header
                              $RFQ
                              3/16" National Single Stroke Solid Die Cold Header
                              No description providedMaximum Wire Diameter3/16" Maximum Shank Length1" Maximum Cutoff Length1-1/2" Maximum Production300 PPM Approx. Weight4,000 lbs AC Motor &am
                              THK Ball Screws X and y axis
                              $1,490
                              THK Ball Screws X and y axis
                              One is 10-feet in length, One is 5-foot length, $1,490.00 Plus Freight Re-balled with new properly sized ball bearings.
                              CLEARANCE! 6000 Lb x 20″ EGAN #M601-20 Single Uncoiler
                              $6,000
                              CLEARANCE! 6000 Lb x 20″ EGAN #M601-20 Single Uncoiler
                              Capacity: 6000 Lbs Max Width: 20″ ID Range: 16″–20″ Max OD: 60″ EQUIPPED WITH: Manual Expansion 4-Arm Brake 2 Keepers NOTE: Air motor needs work DIMENSIONS: 5′ x 3′ x 5′ APPROX WEIGHT: 4000 Lbs LOCATIO
                              • Maximum weight capacity: 6000Lb
                              • Maximum coil width: 20"
                                50 Ton Used Airam Cut Off Press With Large Bed, Mdl. 3562, Note: New Replacement Cost $ 61
                                $12,500
                                50 Ton Used Airam Cut Off Press With Large Bed, Mdl. 3562, Note: New Replacement Cost $ 61
                                Tonnage 50 Bed Size (L- R, F- B) 70" x 51" Distance Between Guide Pins (L- R, F- B) 61" x 32 1/2" Stroke 3" Guide Pins Diameter 2 1/2" Dimensions (L x D x H) 70" x 70" x 84" WEIGHT 10,000 Lbs.
                                75 Ton x 5" Used Minster OBS Punch Press, Mdl. 70-4-1/2, Bolster Plate with Ball Tran
                                $29,500
                                75 Ton x 5" Used Minster OBS Punch Press, Mdl. 70-4-1/2, Bolster Plate with Ball Tran
                                Tonnage 75 Tons Stroke 5" Opening Between Uprights 18-1/2" Shank Szie 2" Ram Area 18" x 24" Throat 11" Dimensions (W x D x H) Control Box 37" x 13" x 61" Dimensions (W x D x H) (Machine) 70" x 78
                                25 Ton x 3" Used Rousselle Gap Frame OBI Punch Press (Single Crank), Mdl. #3G, Air Tr
                                $5,950
                                25 Ton x 3" Used Rousselle Gap Frame OBI Punch Press (Single Crank), Mdl. #3G, Air Tr
                                Tonnage 25 Stroke 3" Shut Height 9 3/4" Bed Size ( L-R, F-B ) 20" x 14" Ram Size ( L-R, F-B ) 8 1/4" x 5 1/2" Throat 18" Strokes Per MInute 135 WEIGHT 4400 Lbs. Electric Foot Pedal Air Tri
                                20 Ton x 2" Used Benchmaster High Speed Press, Mdl. 20-4-2424-2-14-PP 20/300-787F, Re
                                $5,500
                                20 Ton x 2" Used Benchmaster High Speed Press, Mdl. 20-4-2424-2-14-PP 20/300-787F, Re
                                Stroke 2" Bed Area 24" x 24" Shut Height 14" Strokes Per MInute 20 - 300 Reeves Variable Speed Drive Hydraulic Overlaod Protection Palm Button Controls W/Emergency Stop Auto Lube System Pedestal
                                20 Ton x 1-1/4" Used Minster High Speed Punch Press, Mdl. P2-20-24, Air Clutch & Brak
                                $17,500
                                20 Ton x 1-1/4" Used Minster High Speed Punch Press, Mdl. P2-20-24, Air Clutch & Brak
                                NOTE:  This press is set up in Jog Mode right now.  Depending on which feeder you use it will need to be customized to your setup.  Press Runs well.  Rear Feeder is currently connected.  The Vam
                                35 Ton x 15" Used Denison Hydraulic MultiPress (C Frame Style), Mdl. SPLA35C, Safety
                                $9,950
                                35 Ton x 15" Used Denison Hydraulic MultiPress (C Frame Style), Mdl. SPLA35C, Safety
                                Tonnage 35 Stroke 15" Bed Size (L-R, F- B) 20" x 30" Bore 4-3/4" Ram 3-1/4" PSI Rating 3950 Horsepower 30 H.P. Voltage WEIGHT 15,000 Lbs. Voltage 440v 3-Phase Note: This Machine Was O
                                30 Ton x 18" Used Logan Hydraulic Press, Mdl. 6000 D-10, Tonnage Indicator, Foot Trea
                                $6,500
                                30 Ton x 18" Used Logan Hydraulic Press, Mdl. 6000 D-10, Tonnage Indicator, Foot Trea
                                Tonnage 30 Stroke 18" Daylight 19" Throat Depth 8 1/2" Bed Area (L-R, F-B) 24 1/2" x 14" Ram Area 6" Ram Cylinder Diameter 4" Type C-Frame Horsepower 15 H.P. Dimensions (LxDxH) 34" x 60" x
                                60 Ton x 6" Used Savage 4 Post Hydraulic Blanking Trim Press, Mdl. 60HTP, STI Minisaf
                                $32,500
                                60 Ton x 6" Used Savage 4 Post Hydraulic Blanking Trim Press, Mdl. 60HTP, STI Minisaf
                                For Questions on Specifications please contact http:www.Savagepress.com Note:  This machine has 3 Pieces.  Press, Electrical Cabinet and the Hydraulic Pump.SAVAGE 4 post presses are built with very long b
                                50 Ton x 18" Used Hannifin Hydraulic Press, Mdl. 500-41, Tonnage Gauge, #6649
                                $11,500
                                50 Ton x 18" Used Hannifin Hydraulic Press, Mdl. 500-41, Tonnage Gauge, #6649
                                Tonnage 50 Stroke 18" Daylight 18" Bed Size (L-R, F-B) 40 1/2" x 24" Ram Size (L-R, F-B) 23" x 22" Ram Cylinder Diameter 5 1/2" Type C-Frame Horsepower 15 H.P. Dimensions (LxWxH) 70" x 50" x 1
                                25 Ton x 3/4" Used Bliss High Speed Punch Press, Mdl. , Shut Height Indicator, Bliss
                                $21,500
                                25 Ton x 3/4" Used Bliss High Speed Punch Press, Mdl. , Shut Height Indicator, Bliss
                                Capacity 25 Ton x 3/4" Bed Area (F-B, L-R) 24" x 18" Stroke 3/4" Crankshaft Diameter 2-1/2" Strokes Per Minute ( Variable ) 220 - 660 SPM Shut Height 10-1/2" Horsepower 5 H.P. WEIGHT 7,000 Lbs.
                                250 Ton Used Best Press Hydraulic Powder Compacting Press (Up And Down Acting), Mdl. JC-14
                                $65,000
                                250 Ton Used Best Press Hydraulic Powder Compacting Press (Up And Down Acting), Mdl. JC-14
                                This press was pressing Zerconium Oxide into the round white pucks you see in the photos.It was recently reconditioned including-- New hydraulic fittings- New Hydraulic Seals- Hydraulic container cleaned and conditioned
                                32 Ton x 4" Used Minster OBI Press As IS Machine, Mdl. #4, Foot Pedal, #20000-36-60-H
                                $12,000
                                32 Ton x 4" Used Minster OBI Press As IS Machine, Mdl. #4, Foot Pedal, #20000-36-60-H
                                Tonnage 32 Stroke 4" Shut Height 11 1/2" Bed Size (L-R, F-B) 24" x 15" Ram Size (L-R, F-B) 15" x 10 1/2" Throat 8 1/4" Opening Thru Back 11 1/2" Strokes Per MInute 100 Horsepower 3 H.P. Clu
                                500 Ton Used Bliss Straight Side Stamping Press (BIG HEAVY DUTY PUNCH PRESS), Mdl. HP2-500
                                $RFQ
                                500 Ton Used Bliss Straight Side Stamping Press (BIG HEAVY DUTY PUNCH PRESS), Mdl. HP2-500
                                Tonnage 500 Ton Bed Area (L-R, F-B) 84" x 48" Stroke Length 6" Slide Adjustment 6" Shut Height 18" Bolster Plate 8" Thick, T-Slotted Stroke Per Minute (Variable) 30 - 60 SPM Bed Opening 66" x 28"
                                100 Ton x 5" Used Schuler Beuhler (Excellent Shape) C-Frame Straight Side Stamping Pr
                                $54,500
                                100 Ton x 5" Used Schuler Beuhler (Excellent Shape) C-Frame Straight Side Stamping Pr
                                Capacity 100 Ton x 5" Stroke 5" Stroke Adjustment 3.9" Maximum Open Height 14.5" Table Size 37" x 25" Shank Hole 1.9" Distance of the Slide, Maximum Tool Dimension (BxD) 21" x 17" Distance Betwee
                                80 Ton x 10" Used Federal OBI Press, Mdl. #7, Wintress Dipro 1500 Die Monitor, Air Cl
                                $24,500
                                80 Ton x 10" Used Federal OBI Press, Mdl. #7, Wintress Dipro 1500 Die Monitor, Air Cl
                                Tonnage 80 Stroke 10" Bed Size (L-R, F-B) 36" x 28" Shut Height 13 1/2" Throat 15" Strokes Per MInute 75 Clutch Type Air Clutch Ram Size (L-R, F-B) 28" x 18" Horsepower 7 1/2 Dimensions (Lx
                                150 Tons x 10" Used Chicago Straight Side Double Crank Punch Press, Mdl. , Air Clutch
                                $14,500
                                150 Tons x 10" Used Chicago Straight Side Double Crank Punch Press, Mdl. , Air Clutch
                                          Tonnage 150 Ton Bed Area 84" x 48" Shut Hieght 20" Stroke Length 10" Ram Size (L-R, F-B) 74" x 42" Distance From Floor To Bed 44" Dimensions
                                50 Ton Used Whitney Single End Punch, Mdl. 652-50, Foot Pedal, #7206 *SPECIAL PRICE! ASK S
                                $12,000
                                50 Ton Used Whitney Single End Punch, Mdl. 652-50, Foot Pedal, #7206 *SPECIAL PRICE! ASK S
                                Foot Pedal
                                20 Kilonewton Used Eckold Riveter, Shear and Forming Tool, Mdl. HSP 900/20, Dual Palm Cont
                                $17,500
                                20 Kilonewton Used Eckold Riveter, Shear and Forming Tool, Mdl. HSP 900/20, Dual Palm Cont
                                The HSP 900/20 is a hydraulic press in special design with 900 mm horizontal throat depth and 20 kilonewton pressure. Stroke position adjustable by hand wheel. Throat 36" Vertical Height 12" ~ 21" Stroke 0 -
                                8" Used Dayton Bench Grinder, Mdl. 42909B, #A3999
                                $150
                                8" Used Dayton Bench Grinder, Mdl. 42909B, #A3999
                                Capacity 8" Arbor Size 5/8" Wheel Center to Center 16-1/2" Grit 32 & 60 Horsepower 3/4 H.P Maximum Speed 3,450 RPM None
                                1/2" x 3.9" Used Cavallin Tandem Plate & Wire Rolling Mill Jewelry Making Machin
                                $4,500
                                1/2" x 3.9" Used Cavallin Tandem Plate & Wire Rolling Mill Jewelry Making Machin
                                Capacity 1/2" x 3.9" Roll Diameter 2" Roll Width 3.9" Roll Speed 16/17 RPM Production Rate 3m. per minute Horsepower 1 H.P. WEIGHT 400 Lbs. Manual Downfeed Adjustment 110V.
                                26" Trennjaeger Heavy Duty Ferrous Up-Cut Cold Saw, Mdl. PMC-8, (2) Vertical Hydrauli
                                $14,500
                                26" Trennjaeger Heavy Duty Ferrous Up-Cut Cold Saw, Mdl. PMC-8, (2) Vertical Hydrauli
                                Cutting Capacity: Rectangle 8 1/2" High x 24" Long Round 8 1/2" Sawblade Size 22"- 26" Non Ferrous 146 FPM Mitering 40 Degrees Rotary Table Size 27 1/2" Dimensions ( L x W x H ) 120" x 38" x 89"
                                240 Ton x 16' Used Steelweld Mechanical Press Brake, Mdl. H3 1/2-12 (M), Note: Machine Is
                                $12,000
                                240 Ton x 16' Used Steelweld Mechanical Press Brake, Mdl. H3 1/2-12 (M), Note: Machine Is
                                Tonnage 240 Ton Tonnage at Mid Stroke 160 Shut Height 12" Throat 18" Thickness of Base Plate 3" Bed Width 7 1/8" Stroke Length 3 1/2" Strokes Per MInute 22 Backgauge No Safety Curtains No
                                10" x 12" Used Karstens Stuttgart Universal Cylindrical Grinder, Mdl. ASA, Work
                                $8,500
                                10" x 12" Used Karstens Stuttgart Universal Cylindrical Grinder, Mdl. ASA, Work
                                NOTE:  THIS MACHINE DOES NOT HAVE THE COMPLETE OPTIONAL INTERNAL GRINDING ATTACHMENT Capacity Swing Over Table 10" Distance Between Centers 12" Grinding Wheel Diameter x Width x Bore 10" x 1" x 3
                                6" x 12" Used Mitsui Surface Grinder, Mdl. MSG-200SH, Lubrication System, Perman
                                $3,750
                                6" x 12" Used Mitsui Surface Grinder, Mdl. MSG-200SH, Lubrication System, Perman
                                Capacity 6" x 12" Longitudinal Table Travel 17" Cross Table Travel 8" Table to Spindle Center 18" Height Under Wheel to Chuck 11" Grinding Wheel Size 8" x 3/4" x 1-1/4" Cross Feed per Rev. of Handwh
                                6" x 12" Used Webb Heavy Duty Surface Grinder, Mdl. 612, 6" x 12" Perm
                                $3,850
                                6" x 12" Used Webb Heavy Duty Surface Grinder, Mdl. 612, 6" x 12" Perm
                                Note: this machine appears to be a 6 by 18. The Chuck currently in the machine is smaller than the available capacity. WEIGHT 1,800 Lbs. Spindle to Top of Chuck 12" Made In Taiwan 6" X 12" Permanent Magen
                                3/16" x 10' Used Elga Hydrapower Hydraulic Power Shear, Mdl. 10316, Front Operated Po
                                $19,500
                                3/16" x 10' Used Elga Hydrapower Hydraulic Power Shear, Mdl. 10316, Front Operated Po
                                Max. Cutting Length 120" Back Gauge Front Operated Power Back Gauge with Indicator Back Gauge Range 27" Throat 13 1/2" Type Hydraulic Number of Hold Downs (Hydraulic) 13 Strokes Per MInute 21 Hor
                                .060" - 6.5" Used Sunnen Power Stroker Honing Machine, Mdl. MBB-1801E, Power Str
                                $10,950
                                .060" - 6.5" Used Sunnen Power Stroker Honing Machine, Mdl. MBB-1801E, Power Str
                                Max. Honing Length 16" Spindle Speeds (12) 200 - 2,500 RPM Stroke Rates 80 - 310 SPM Power Stroke Length 1/2" - 3" Honing Oil Capacity 25 Gallons Voltage 440V ~ 3 Phase Horsepower 1 H.P. Floor Sp
                                Used Ramco Monoset Tool & Cutter Grinder, Mdl. UNOSET, Motorized Work Head, One Shot Lubri
                                $4,950
                                Used Ramco Monoset Tool & Cutter Grinder, Mdl. UNOSET, Motorized Work Head, One Shot Lubri
                                Wheelhead Capacity Spindle Speeds (3) 4,000- 5,729- 8,000 RPM Grinding Wheel Size 4" Longitudinal Slide Travel 6" Vertical Slide Travel 9.50" Cross Slide Travel 7.50" Workhead Capacity: Speed 4
                                11" Used N. Ferrara Motorized Metal Gang Slitter With Take Up, Mdl. , Foot Pedal, E-S
                                $6,750
                                11" Used N. Ferrara Motorized Metal Gang Slitter With Take Up, Mdl. , Foot Pedal, E-S
                                Thickness Range .002"/.060" Slitting Width 11" Speed Range 50 to 80 F.P.M Stroke 2" Slitter Knife Diameter 4" Spacer Size 3" Take up 5-1/2" Entrance Table 15" WEIGHT 650 Lbs. Foot Pedal
                                Used BMT Multi Barrel Slide Hone Finishing Mill, Flywheel Tumbler Deburring Machine, Mdl.
                                $7,500
                                Used BMT Multi Barrel Slide Hone Finishing Mill, Flywheel Tumbler Deburring Machine, Mdl.
                                Barrels 6 None
                                Used Kentrall Hardness Tensile Tester, Mdl. MC-2, Tooling, #A3607
                                $425
                                Used Kentrall Hardness Tensile Tester, Mdl. MC-2, Tooling, #A3607
                                Work Table 6" x 10" Voltage 115V ~ 1 Phase Dimensions (W x L x H) 18" x 15" x 24" Tooling
                                2.75" Used Eagle Tube End Former, Mdl. E2000, (6) EXTRA DIES, Allen Bradley SLC 500 P
                                $9,950
                                2.75" Used Eagle Tube End Former, Mdl. E2000, (6) EXTRA DIES, Allen Bradley SLC 500 P
                                Tube Capacity 2.75" Max. Wall Thickness 0.080" Average Machine Cycle Time 4 - 6 Seconds Water Supply 3 - 5 GPM Hydraulic Pump 15 GPM Oil Reservoir Capacity 81 Gallons WEIGHT 1,650 LBS. (6) EXTR
                                16 Ga. Used Marchant Foot Stretching & Shrinking Machine, Mdl. 6F, Set Of Stretching Jaws
                                $2,450
                                16 Ga. Used Marchant Foot Stretching & Shrinking Machine, Mdl. 6F, Set Of Stretching Jaws
                                Jaw Opening 16 GA. WEIGHT 400 Lbs. Set Of Stretching Jaws
                                60" Used Lodge & Shipley Right Angle T Lathe (Good Working Condition, Comes With Warr
                                $19,500
                                60" Used Lodge & Shipley Right Angle T Lathe (Good Working Condition, Comes With Warr
                                Swing in Gap 60" Carriage Travel 52.5" Compound Travel 16" Hole Thru Spindle 11-1/2" Distance Face Plate to Carriage 16" Distance Face Plate to Compound 4.13" - 20.5" Spindle Speeds (24) 4 - 225 RPM
                                7.5 KVA Used Rex Spot Welder With Long Arms, Mdl. 62FR, Foot Pedal, Rocker Arms, #A4077
                                $2,250
                                7.5 KVA Used Rex Spot Welder With Long Arms, Mdl. 62FR, Foot Pedal, Rocker Arms, #A4077
                                KVA Rating 7.5 KVA Throat 30" Voltage 230V, 60CY Foot Pedal Rocker Arms
                                11" x 18" Used Hardinge Precision Toolroom Turning, Facing, Boring Lathe, Mdl. T
                                $12,500
                                11" x 18" Used Hardinge Precision Toolroom Turning, Facing, Boring Lathe, Mdl. T
                                Swing Over Carriage 9" Swing Over Cross Slide 6" Distance Between Centers 18" Spindle Speeds (Variable) 125- 3,000 RPM Spindle Nose 4 Degree Taper Hole Thru Spindle 1 1/4" Feeds (Variable) 1/4"- 7 I
                                6,000 Lbs. x 48" Used Ransome Powered Welding Positioner, Mdl. , Foot Pedal, Push But
                                $17,500
                                6,000 Lbs. x 48" Used Ransome Powered Welding Positioner, Mdl. , Foot Pedal, Push But
                                Capacity 6,000 LBS. Table Size 48" Tilting Range 0 - 135 Degrees Motorized Horsepower 3 H.P. x 2 Motors Voltage 460V ~ 3 Phase Dimensions (WxDxH) 110" x 89" x 74" Foot Pedal Power Tilt Power R
                                1/8" - 5/16" Used Shuster Wire Straightener/Cutoff Machine, Mdl. 2A4V, Vari Spee
                                $11,500
                                1/8" - 5/16" Used Shuster Wire Straightener/Cutoff Machine, Mdl. 2A4V, Vari Spee
                                Wire Diameter .125" - .312" Speed Range (Variable) 28 - 200 FPM Voltage 480V ~ 3 Phase WEIGHT 2,400 Lbs. Vari Speed Drive Straightening Head
                                4.5" Used Conrac Hydraulic Tube Bender, Mdl. Digicon 255- SX, Digicon Digital Program
                                $19,500
                                4.5" Used Conrac Hydraulic Tube Bender, Mdl. Digicon 255- SX, Digicon Digital Program
                                Capacity: Round Tubing 4.5" x 0.312" W.T. Pipe 4" IPS x Schedule 80 Bend Direction Clockwise Bend Radius: Centerline Max. Without Booster 12" Centerline Max. With Booster 6" Max. Bend Angle 180
                                19-1/2" x 88" Used Kearney & Trecker Plain Type Horizontal Milling Machine W/ Un
                                $7,950
                                19-1/2" x 88" Used Kearney & Trecker Plain Type Horizontal Milling Machine W/ Un
                                Table Size 80" x 20" Vertical Table Travel 21" Longitudinal Table Travel 42" Cross Table Travel 14" Speed Selector Variable Speed Spindle Speed (16) 15 - 1500 RPM Table Feeds 3/8" To 90 IPM Table
                                1/16" - 3/16" Used Lewis Wire Straightener & Cut Off, Mdl. 2C3-829-6, Dies Inclu
                                $12,500
                                1/16" - 3/16" Used Lewis Wire Straightener & Cut Off, Mdl. 2C3-829-6, Dies Inclu
                                Dimensions (L x W x H) 122" x 39" x 48" Capacity (High Carbon, Alloy Or Steel Wire 1/16" to 1/8" Speed Range 100 Feet Per Minute Cutting Lengths 3" to 7-1/2", Clutching 7-1/2" and Longer Shuttle Length 72
                                SAJO PF-52 | Horizontal | Spindle Cat 40 |
                                $RFQ
                                SAJO PF-52 | Horizontal | Spindle Cat 40 |
                                Horizontal 11" x 49" Table Spindle taper Cat 40 Speeds Manual feed x, y, z 220v / 3 Phases Weight 3240 lbs Dimensions 63"x58"x62"
                                2012 CATERPILLAR D4K XL DOZER - W6645
                                $57,000
                                2012 CATERPILLAR D4K XL DOZER - W6645
                                4 CYL CAT ENGINE, HYDRO-STATIC TRANS W/ JOYSTICK STEERING, 18 IN PADS, 9FT 6 WAY BLADE
                                USED C FRAME PRESS 100 TON HANNIFIN HYDRAULIC
                                $RFQ
                                USED C FRAME PRESS 100 TON HANNIFIN HYDRAULIC
                                100 TON HANNIFIN HYDRAULIC C FRAME PRESS Floor standing Bed area: 96" L-R x 21" F-B Stroke approx.: 18" maximum Throat depth: 15" Ram diameter: 7.5" Floor to top of bed: 41" Power un
                                NEW CLEVELAND A3VHG VERTICAL KNEE MILL
                                $RFQ
                                NEW CLEVELAND A3VHG VERTICAL KNEE MILL
                                **PLEASE CLICK ON LINK BELOW FOR BROCHURE/SPECIFICATIONS AND PICTURE** http://www.clevelandmachinery.com/pdf/N2869.pdf
                                NEW CLEVELAND BM660H CNC VERTICAL BED MILL
                                $RFQ
                                NEW CLEVELAND BM660H CNC VERTICAL BED MILL
                                **PLEASE CLICK ON LINK BELOW FOR BROCHURE/SPECIFICATIONS AND PICTURE** http://www.clevelandmachinery.com/pdf/n2986.pdf
                                NEW CLEVELAND MODEL #D2202 DOUBLE COLUMN VERTICAL MACHINING CENTER D2202
                                $RFQ
                                NEW CLEVELAND MODEL #D2202 DOUBLE COLUMN VERTICAL MACHINING CENTER D2202
                                **PLEASE CLICK ON LINK BELOW FOR BROCHURE/SPECIFICATIONS AND PICTURE** http://www.clevelandmachinery.com/pdf/N2999.pdf
                                NEW SAMSTAR CYLINDRICAL GRINDER MODEL #ME1432B
                                $RFQ
                                NEW SAMSTAR CYLINDRICAL GRINDER MODEL #ME1432B
                                Cylindrical, OD/ID
                                USED G & L ROTARY TABLE 60" X 72" HYDROSTATIC
                                $RFQ
                                USED G & L ROTARY TABLE 60" X 72" HYDROSTATIC
                                CAPACITY: 60" X 72"HYDROSTATIC 360 DEGREE MANUAL ROTATION (6) 1" T-SLOTS CLAMPING 4 CORNERS ANY DEGREE 90 DEGREE SHOT PIN 19" BASE TO TOP 30,000LB CAPACITY
                                USED T-SLOTTED FLOOR PLATE 96"W X 240"L X 12"H
                                $RFQ
                                USED T-SLOTTED FLOOR PLATE 96"W X 240"L X 12"H
                                T-SLOTTED FLOOR PLATE 96"W X 240"L X 12"H 8 T-SLOTS 1-3/8"
                                USED MIGHTY COMET MV-6 CNC BED MILL WITH DELTA DYNAPATH CONTROL
                                $RFQ
                                USED MIGHTY COMET MV-6 CNC BED MILL WITH DELTA DYNAPATH CONTROL
                                Table size 13" x 49-1/2" Maximum table load 1500 lbs. Range: longitudinal (X) 40"            cross (Y) 20"     &#
                                USED HECKERT UNIVERSAL MILL WITH H.D. VERTICAL MILLING ATTACHMENT
                                $RFQ
                                USED HECKERT UNIVERSAL MILL WITH H.D. VERTICAL MILLING ATTACHMENT
                                TABEL WORKING SURFACE: 10 1/2" X 49 1/2" LONGITUDINAL:34 " CROSS: 12" VERTICAL:20 " TAPER IN BOTH SPINDLES: #40 SPINDLE SPEED RANGE: 45-2240 RPM 18 SELECTIONS LONGITUDINAL & CROSS FEED
                                • Table width: 10.5"
                                • Table length: 49.5"
                                  amada RG-50 press brake
                                  $25,000
                                  amada RG-50 press brake
                                  amada press brake RG-50
                                  • Tonnage: 55T
                                    USED ACRA CNC Vertical Machining Center
                                    $RFQ
                                    USED ACRA CNC Vertical Machining Center
                                    Mitsubishi Meldas CNC Control Full Enclosure 16 Tool Carousel Rigid Box Ways Worklight AC Digital Drives Pilot Lamp Ribbed Castings Levelling Bolts and Pads No Table Overhang Manuals, toolbox TABLE: Overall
                                    USED Mighty Comet CNC Vertical Machining Center,
                                    $RFQ
                                    USED Mighty Comet CNC Vertical Machining Center,
                                    Table Size - 25" x59" X-Travel - 58" Y-Travel - 28.5" Z-travel - 24.5" Spindle Motor - 20 HP GEAR HEAD Spindle Speeds - 50 to 4000 RPM Max Cutting Feed Rate - 393 IPM Rapid Traverse Rate -
                                    • X axis: 58"
                                    • Y axis: 28.5"
                                      USED Hurco CNC VMC 40SLV SPIRIT
                                      $RFQ
                                      USED Hurco CNC VMC 40SLV SPIRIT
                                      With 24 Tool Changer Z Digital Readout Overall Table Size 23.7" x 55.2" Working Surface 19.7" x 47.2" Slotted Table Table Load Capacity 1100 Lbs. Travels: X-Axis Travel 40 " Y-Axis Trave
                                      • X axis: 40"
                                      • Y axis: 20"
                                        USED SAMSTAR HEAVY DUTY 32 X 120 LATHE
                                        $RFQ
                                        USED SAMSTAR HEAVY DUTY 32 X 120 LATHE
                                        HEAVY DUTY ONE PIECE CONSTRUCTION HARDENED & GROUND BED WITH GAP 4-3/16" SPINDLE BORE ELECTRO-MAG CLUTCH & BRAKE SYSTEM HARDENED AND GROUND WAYS 6 WAY RAPID TRAVERSE 3 JAW CHUCK 4 JAW CHUCK FACE PLAT
                                        USED MONARCH HEAVY DUTY LATHE 49" X 84"
                                        $RFQ
                                        USED MONARCH HEAVY DUTY LATHE 49" X 84"
                                        32" 4 Jaw Chuck Sony Digital Readout on Carriage Travel D1-11 Camlock Spindle 30 HP 220/440 Main Motor 48 Feeds .006 - .363 Thread Dial 32" Wide Bed Dorian Quick Change Toolpost with Holders
                                        USED Hardinge Cobra 65 CNC LATHE, Fanuc 21i-TA, Tailstock
                                        $RFQ
                                        USED Hardinge Cobra 65 CNC LATHE, Fanuc 21i-TA, Tailstock
                                        USED Hardinge Cobra 65 CNC LATHE, Fanuc 21i-TA, Tailstock Swing diameter over upper way cover (max) 22.00"/558.8mm Z-Axis travel (maximum) ................. 31.00"/787.4mm 10" Jaw chuck Spindle co
                                        • Swing: 22"
                                          USED DENVER ASTRO II MONOSET TOOL GRINDER
                                          $RFQ
                                          USED DENVER ASTRO II MONOSET TOOL GRINDER
                                          (ASTRO II) ... Swing Over Table............................. 12" Dist. Between Tailstock & Workhead........... 15" Work Head Spindle Tapers..................... 5C Table Working Surface................
                                          Amada FBD-8025-E
                                          $34,000
                                          Amada FBD-8025-E
                                          1995 Amada FBD-8025-E good working
                                          • Tonnage: 88T
                                            USED GER / K.O. LEE CNC SURFACE GRINDER
                                            $RFQ
                                            USED GER / K.O. LEE CNC SURFACE GRINDER
                                            K.O. LEEMATIC 7000 CNC CONTROL 12" X 30" MAXIMUM CAPACITY WITH 10" X 24" SUBURBAN PERMANENT MAGNETIC CHUCK 12" DIAMETER GRINDING WHEEL CAPACITY VARIABLE SPEED SPINDLE WITH AC TECH MODEL SCF
                                            USED MATTISON 14" X 96" HORIZ SURFACE GRINDER SQUARE COLUMN
                                            $RFQ
                                            USED MATTISON 14" X 96" HORIZ SURFACE GRINDER SQUARE COLUMN
                                            Magnetic Chuck: (2x) 14" x 40" Wheel Diameter: 20" Wheel Width: 6" Wheel ID: 10" Spindle Power: 30 HP 1150 RPM Square Column Twin Magnetic Chucks Power Increme
                                            amada
                                            $35,000
                                            amada
                                            1993 Amada press brake call 216 214 6600
                                            • Tonnage: 88T
                                              5" SPINDLE GIDDINGS & LEWIS CNC HORIZONTAL BORING MILL
                                              $RFQ
                                              5" SPINDLE GIDDINGS & LEWIS CNC HORIZONTAL BORING MILL
                                              5" SPINDLE DIAMETER G & L "NUMERIPOINT" M-400 CONTROL WITH CRT ON PENDANT - MANUAL CONTROL #50 TAPER W/POWER DRAW BAR PENDANT CONTROL SPINDLE SPEEDS 6 TO 1120 RPM FEEDS- 0.0492 In -139.76 IPM H
                                              • Spindle diameter: 5"
                                              • X axis travel: 84"
                                                Categories:
                                                Condition:
                                                Manufacturer:
                                                Location:
                                                Price:
                                                •  to 
                                                <Prev | 101 | 102 | 103 | 104 | 105 | 106 | 107 | 108 | 109 | 110 | Next>