Machine Sales – Buy or Sell New and Used Machinery and Machine Tools at Machine Sales

LAPMASTER DSG 720 (14434)

$RFQ

LAPMASTER STOCK # 14434MANUFACTURER:    LAPMASTER INTERNATIONALMODEL:           DSG 720SERIAL NUMBER:&a

Woodbridge, CT
View Listing

9" VERTICAL WIRE DRAWING BLOCK (14426)

$RFQ

TYPE: SINGLE DIE WIRE DRAWING BLOCKAXIS: VERTICALBLOCK DIAMETER: 9"BLOCK FACE WIDTH: 4"NO. OF DIES: 1PURCHASER MUST PROVIDE DIE HOLDERDRIVE MOTOR:-MANUFACTURER: DAYTON DC GEARMOTOR-MODEL" 62418A-RATIO 11.8 TO 1-1/2 HP, 1

Woodbridge, CT
View Listing

METTLER-TOLEDO COIN COUNTING AND WEIGHING MACHINE (14425)

$RFQ

MANUFACTURER: METTLER-TOLEDO CORP. (USA)TYPE: HI SPEED COIN COUNTING AND WEIGHING MACHINEMODEL: IM3100 XESERIAL NO.: 11013121VOLTS: 120PHASE: 3CYCLES: 50/60AMPS: 2.8TYPE 1 ENCLOSUREDRAWING NO.: 66069006OVERCURRENT PROTEC

Woodbridge, CT
View Listing

1/4" NATIONAL COLD HEADER (14423)

$RFQ

MANUFACTURER: NATIONAL MACHINERY COMPANY, TIFTON, OHIO (USA)TYPE: COLD HEADING MACHINECAPACITY: 1/4" MAXIMUMSERIAL NO.: 1869DOUBLE STROKETWO ROLL FEED

Woodbridge, CT
View Listing

N. FERRARA 300 TON PRESS (14422)

$RFQ

Tonnage 300 tons

Woodbridge, CT
View Listing

T-M VACUUM PRODUCTS V-1G1200

$RFQ

MANUFACTURER: T-M VACUUM OVENSOERLIKON LEYBOLD VACUUM FURNACETYPE: ELECTRIC D16 BSERIAL NO: 11266MODEL: V-1G1200-24POWER: 480 VOLTS, 3 PHASE, 60 HERTZ, 25 AMPSVACUUM: 70-80 PSIOVEN: MODEL V/IG

Woodbridge, CT
View Listing

DELTA RIMMER/GRINDER/POLISHER (14420)

$RFQ

MANUFACTURER: CUSTOMTYPE: CIRCULAR RIMMER, GRINDER, POLISHERTYPE OF WHEEL: VERTICALWHEEL DIAMETER: 16-1/2"DRIVE MOTOR: 3 HP CENTURYCONTROLS: DELTA MODEL VFD-BSE ENCORE DRIVE

Woodbridge, CT
View Listing

WATERBURY FARREL 18" x 26" Hot/Cold 2 Hi Rolling Mill for Flats or Bars (14435)

$RFQ

18" X 26" WATERBURY FARREL 2 HI ROLLING MILLStock # 14344MANUFACTURER: WATERBURY FARREL CORPORATION (USA)TYPE: 2 HI REVERSING ROLLING MILL FOR FLAT SHEET OR ROD/BARROLL SIZE: 18" (457MM) DIAMETER X 26" (660MM) WIDTHDRIVE

Woodbridge, CT
View Listing

HAAS Automatic Parts Loader for VTL (14436)

$RFQ

MANUFACTURER: HAAS UMC (USA)TYPE: AUTOMATIC PARTS LOADER FOR VERTICAL MACHINING CENTERAPPLICATION: FOR USE ON HAAS MODEL 500 AND 500SS VERTICAL MACHINING CENTERSYEAR OF MANUFACTURE:NOTE; MACHINE IS NEW. ONLY TESTED ONCE.

Woodbridge, CT
View Listing

450mm SUNDWIG 20 HIGH COLD ROLLING MILL (14419)

$RFQ

Brief Specification of 450mm Sundwig 20 high Cold Rolling MillStock # 14419 Type: 4 column type 20 high millManufacturer: Sundwig, GermanyYear of construction: 1971Year of revamp: 2017Main

Woodbridge, CT
View Listing

FENN 3-1/2F 2 DIE ROTARY SWAGING MACHINE 1-3/4" TUBE CAPACITY, SOLID 5/8" CAPACI

$RFQ

Capacity, Tubes 1.750 inches Capacity, Solids

Woodbridge, CT
View Listing

UNGERER 700mm (27.5") TENSION LEVELER (14400)

$RFQ

700mm Ungerer Tension LevelerStock # 14400Maker                 &am

Woodbridge, CT
View Listing

DURANT 6" LEVELER (14398)

$RFQ

Max Width of Workpiece 6 inches MANUFACTURER: DURANT TOOL COMPANY (USA)TYPE: STRIP LEVE

Woodbridge, CT
View Listing

LANGELIER #3 2 DIE SWAGER (14396)

$RFQ

MANUFACTURER: LANGELIER (USA)TYPE: ROTARY SWAGERNO. OF DIES: 2CAPACITY: 3/16" SOLID - 3/8" TUBEDIE SIZE: 2" LONG X 1-1/2" HIGHDRIVE MOTOR: 2 HPFLOOR MODELNOTE: SPECS ARE PER CATALOG AND VERIFIED

Woodbridge, CT
View Listing

TORIT MODEL 84 DUST COLLECTOR (14395)

$RFQ

MANUFACTURER: TORITTYPE: DUST COLLECTORMODEL: 84SERIAL NO. F 111DRIVE: 3 HP, 208/230-460 VOLTS, 3 PHASE, 60 HZ

Woodbridge, CT
View Listing

CATERPILLAR NDC 100 ELECTRIC FORKLIFT (14394)

$RFQ

MANUFACTURER: CATERPILLARSTOCK # 14394TYPE: TOWMOTORPOWER: ELECTRICMODEL: NDC 10024 VOLTBATTERY RATING: 750 AMP, 6 HOUR RATEDRATED DRAWBAR: 200 LB (91 KG) MAX., 700 LB (318 KG) INTERMITTENTSERIAL NO: 2HL04229TRUCK WEIGHT

Woodbridge, CT
View Listing

WATERBURY FARREL 4 SLIDE 00-SDDS (14393)

$RFQ

MANUFACTURER: WATERBURY FARREL (USA)TYPE: FOUR SLIDE WIRE MACHINEMODEL: 00-SDDSDRIVE: 5 HP, 2000 RPM W/ STERLING VARI-SPEED DRIVEREBUILT: 2005

Woodbridge, CT
View Listing

ZED & H NEMAN Mechanical Press (14392)

$RFQ

NEMAN MECHANICAL PRESSMANUFACTURER: ZED & H NEMAN CO.TYPE: VERTICAL MECHANICAL PRESSWORK PLATE: 12" X 6"MODEL: 1-1SHUT HEIGHT: 6"DRIVE: 1 HP, 220/440 VOLTS U.S. MOTORS

Woodbridge, CT
View Listing

PAUL O ABBE BALL MILL (14391)

$RFQ

MANUFACTURER: PAUL O. ABBETYPE: BALL MILLBARREL SIZE: 26" X 3"DRIVE MOTOR: 5 HP, 1745 RPM,230/460 VOLT WESTINGHOUSEGEARBOX: DORRIS GEAR DRIVE, RATIO 25 TO 1PRESSURE IN JACKET: 14 PSIG

Woodbridge, CT
View Listing

REROLLING MILL OPERATION (14390)

$RFQ

REROLLING MILL OPERATIONStock # 143901. 12-Hi SENDZIMIR REVERSIBLE MILL LINE(CUPPER)               &

Woodbridge, CT
View Listing

1000 LBS X 18" AMERICAN STEEL LINE COIL REEL: STOCK #14389

$RFQ

Max Weight of Coil 1000 pounds Max Width of Coil

Woodbridge, CT
View Listing

6,000 lb x 12" JACO UNCOILER (14387)

$RFQ

Max Weight of Coil 6000 pounds Max Width of Coil

Woodbridge, CT
View Listing

720,000 TPY USED WIRE ROD ROLLING MILL (14380)

$RFQ

720,000 TPY WIRE ROD MILLStock # 14380    Wire rod rolling equipment    1.    Brief Introduction2.    Layout3.&a

Woodbridge, CT
View Listing

3" RUESCH 11 ROLL LEVELER (14322)

$RFQ

Max Width of Workpiece 3 inches RUESCH 11 ROLL LEVELERStock # 14322SPECIFICATIONS&n

Woodbridge, CT
View Listing

16" ROBINSON RENCO WIRE DRAWING DEADBLOCK [14043]

$RFQ

(Used) 16" Diameter Robinson Renco Wire Drawing Deadblcok Machine # 14043 Type Machine: Wire Drawing Deadblock Model: 16DB30VF Serial Number: 3563 Finish Blo

Woodbridge, CT
View Listing

Haas TM-1 CNC Vertical Mill

$RFQ

SPECIFICATIONS: Table Size 10.5” x 47.8” X-Travel 30” Y-Travel 12” Z-Travel 16” Rapid Feedrate (X, Y, Z) 200 ipm Spindle Speed 4,000 RPM Spindle Taper CAT40 Spindle Motor 7.5 HP Approximate Weight 5,000 lbs.

Lake Bluff, IL
View Listing

Cincinnati Milacron Model 220-8 “Centuramic” Centerless Grinder

$RFQ

SPECIFICATIONS: Maximum Capacity, Standard Work Rests Diameter 0-3” Maximum Work Diameter Depending on Work Rest Ordered 4.5” Grinding Wheel Width 1”-8” Grinding Wheel Maximum Diameter 24” Grinding Wheel Minimum Dia

Lake Bluff, IL
View Listing

Haas TM-2 CNC Milling Machine

$16,500

Table: 10" x 57" Spindle: Cat 40 x-Axis Travel: 40" y-Axis Travel: 16" z-Axis Travel: 16" RPM: 4,000RPM Controller: Haas Year: 2004 Voltage / Phase: 240 / 3 Weight: 5,500lbs Dimensions:

Vinton, TX
View Listing

LINDBERG 2350 F ATMOSPHERE BOX FURNACE, ELECTRIC, 24"W 36"L 18&qu

$RFQ

DIGITAL CONTROLS ELECTRIC ATMOSPHERE BOX FURNACE WITH VERTICAL LIFT AIR OPERATED FRONT DOOR. HEATING ELEMENTS ARE ON BOTH SIDE WALLS, REAR WALL AND DOOR,. EQUIPPED WITH (3) GAS FLOSCOPES (ENDOTHERMIC, NATURAL GAS &

Chamber width: 24"
Chamber length: 36"

Tolland, CT
View Listing

LINDBERG 1400 F ELECTRIC BOX DRAW FURNACE 24"W 36"L 18"H

$RFQ

DIGITAL TEMPERATURE CONTROL AIR OPERATED VERTICAL LIFT FRONT DOOR. HEATING ELEMENTS AND BELT DRIVEN CIRCULATING FAN (WITH WATER COOLED SHAFT) ARE MOUNTED IN A CHAMBER BEHIND THE WORK AREA..

Chamber width: 24"
Chamber length: 36"

Tolland, CT
View Listing

POLLUTION CONTROL VPI 52 BURN OFF OVEN 42"W 48"L 44"H

$RFQ

DIGITAL CONTROLS SINGLE SIDE SWING DOOR WITH POSITIVE LATCHING AND PRESSURE RELIEF ROOF PANEL. INTERIOR DOORS, WALLS AND ROOF ARE LINED WITH LIGHT WEIGHT FIBER REFRACTORY. FLOOR IS A POURED CASTABLE REFRACTORY. HEAT (35

Tolland, CT
View Listing

KOIKE-ARONSON PLASMA ARC CUTTING SYSTEM WITH TABLE 10'CAPACITY

$RFQ

NEW 2004 CAPACITY 3100MM (122") ORDER # S0178105 HYPERTHERM HYSPEED HT2000 POWER SUPPLY

Tolland, CT
View Listing

GASBARRE 2150 F ELECTRIC ATMOSPHERE BOX FURNACE 28"W 48"L 28"

$RFQ

DIGITAL CONTROLS ELECTRICALLY HEATED ATMOSPHERE (HYDROGEN & NITROGEN) RETORT BOX FURNACE WITH SIDE SWING DOOR (WATER COOLED DOOR FLANGE). INTERIOR HAS AN ALLOY RETO

Chamber width: 28"
Chamber length: 48"

Tolland, CT
View Listing

ABBOTT 2100 F ATMOSPHERE 12"WIDE BELT FURNACE

$RFQ

DIGITAL CONTROLS 12"WIDE ATMOSPHERE BELT FURNACE WITH ALLOY RETORT CURRENTLY USING A 10"WIDE BELT. PARTS ARE LOADED ON THE VARIABLE SPEED MESH BELT AT 6'LONG ENTRANCE TABLE, PASS THROUGH 3' ENTRANCE P

Chamber width: 12"
Chamber length: 216"

Tolland, CT
View Listing

STEELMAN GAS FIRED BURN OFF OVEN 6'W 3'L 3'H

$RFQ

DIGITAL CONTROLS DOUBLE DOOR OPENING WITH POSITIVE LATCHING. PRIMARY HEAT CHAMBER AND AFTER BURNER CHAMBER ARE MOUNTED ON REAR WALL WITH HEAT (351,000 BTU/HR MAX. TOTAL) SUPPLIED BY TWO PACKAGE BURNERS. HEAT FLOW IS &q

Tolland, CT
View Listing

LUCIFER 1450 F TWO CHAMBER ELECTRIC FURNACE

$RFQ

DIGITAL CONTROLS (2) CHAMBER BOX FURNACE WITH SIDE SWING DOORS AND REAR MOUNTED AIR CIRCULATING FANS. THE TOP CHAMBER IS 18"LONG . BOTTOM CHAMBER IS 48"L

Chamber width: 18"
Chamber length: 48"

Tolland, CT
View Listing

FADAL VMC 15 VERTICAL MACHINING CENTER 1994

$RFQ

FADAL VMC 15 VERTICAL MACHINING CENTER 1994 Serial # 9404163 MODEL........................: 914-15 TRAVELS: X............................: 20" Y............................: 16" Z.....................

Livonia, MI
View Listing

Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999

$RFQ

Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999 S/N 9910278 Fadal CNC 88 HS CNC Controller, 21-Automatic Tool Changer, CAT40 Taper, Work Light Table Size: 38″x16″ Travels: X Axis 30″ Y Axis

Livonia, MI
View Listing

Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999

$RFQ

Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999 S/N 9910278 Fadal CNC 88 HS CNC Controller, 21-Automatic Tool Changer, CAT40 Taper, Work Light Table Size: 38″x16″ Travels: X Axis 30″ Y Axis

Livonia, MI
View Listing

3/4" X 30" Eldorado Mega Model M-75-1041 Precision Deep Hole Gun

$RFQ

SPECIFICATIONS: Drilling Diameter Maximum .75” Drilling Diameter Minimum .055” Maximum Drilling Depth 30” Spindle Speeds 725-5860 RPM Drilling Feed Rate .1-99.9 IPM Rapid Feed Rate 200 IPM Work Table 22” x 26” H

Lake Bluff, IL
View Listing

Johnford SV-40 CNC Vert Machining Cntr, 47" x20" tbl, XYZ=41/20/2

$RFQ

JOHNFORD SV-40 CNC VERTICAL MACHINING CENTER Model SV-40, S/N MLB130534, New 2013 Stock # Q11996 EQUIPPED WITH: Fanuc 0i CNC Control, 10000 RPM Cat 40 Spindle, 24 ATC, Spindle Chiller, Chip Pan. SPECIFICATIONS:

X axis: 41"
Y axis: 20"

Cincinnati, OH
View Listing

Est. 2019 Hitachi ZAXIS 250LC-6 Excavator RTR#5013076-01

$49,000

Unit located in Harriman, TN. Est. 2019 Hitachi ZAXIS 250LC-6 Excavator w/ Bucket, Isuzu 4HK1 Diesel Engine, Hyd Transmission, Enclosed Cab, A/C, Heater, Air Ride Seat, AM/FM Radio, Hyd Thumb, Hour Meter Reads: 2,327 (

Salem, OR
View Listing

8' x 1/2" Bertsch 3-Roll Plate Bending Roll w/Air Drop End, Initia

$RFQ

8' x 1/2" BERTSCH 3-ROLL INITIAL PINCH PLATE BENDING ROLL Model #9, S/N M-9980, New 1971 Stock # Q12014 EQUIPPED WITH: 3-Roll Hydraulic Initial Pinch Design, Air Drop End, Power Bottom-Roll Adjustment, Dia

Roll length: 99"
Thickness: 0.406"

Cincinnati, OH
View Listing

HAAS HL-2BB CNC LATHE

$5,950

BIG BORE, PARTS CATCHER, CHIP CONVEYOR, 3400 RPM, 15 HP, 10"CHUCK

Swing: 20"
Centers: 20"

Thousand Oaks, CA
View Listing

Thermo Scientific Heratherm IMH180 Benchtop Incubator, 6.3 CU FT Capacity

$RFQ

THERMO FISHER SCIENTIFIC BENCHTOP INCUBATOR Model Heratherm IMH180, New 2015 Stock # Q11725, Q11726 (2) Incubators Available FEATURES: Advanced Protocol Microbiological Incubator Capacity 6.3 cu ft (178L) Dual

Cincinnati, OH
View Listing

CHEVALIER FSG-3A818 SURFACE GRINDER

$8,950

2 HP, 8" GRINDING WHEEL

Table width: 8"
Table length: 18"

Thousand Oaks, CA
View Listing

16-36 Barber Colman Universal Gear Hobber

$RFQ

SPECIFICATIONS: Maximum Rated Diameter Pitch (Nominal) 6DP (4.2 Module) Maximum Rated Work Diameter 16” Maximum Hob Diameter 5” Maximum Hob Slide Travel 36” Maximum Work Slide Travel 8” Main Drive Motor 5HP Approx

Lake Bluff, IL
View Listing

No. 16-36 Barber-Colman Universal Gear Hobber

$RFQ

SPECIFICATIONS: Capacity in Steel, 1 Cut 6 DP (4.2 Mod) Rated Work Diameter Max 16” Travel of Hob Carriage Max 36.5” Distance Work Spindle Face to Tail Center Max 64” Work Spindle to C/L of Hob Spindle Max 39.5” Wo

Lake Bluff, IL
View Listing

Haas VF-2SS Machining Center

$51,500

Table: 14" x 36" Spindle: CAT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 24 RPM: 12,000RPM Controller: Haas Year: 2017 4th axis: Ready 5th axis: Available

Vinton, TX
View Listing

Fadal VMC15 Machining Center

$19,000

Table: 16" x 39" Spindle: BT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 21 RPM: 7,500RPM Controller: Fadal Year: 2006 Voltage / Phase: 220 / 3 Weight: 11,0

Vinton, TX
View Listing

buy & sell, new & used machinery, machine tools & equipment

Machines currently for sale: