buy & sell, new & used machinery, machine tools & equipment

<Prev | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | Next>
Refine: Viewing 181 - 200 of 22757 matches
Sort by:
Items Per Page:  20  |  50 |  100
No. 36-6" Fellows Gear Shaper with 22" Riser
S/N: 33437 New: 1965 EQUIPPED WITH: 22" Riser. Extended Cutter Spindle Elevation. Rapid Rotation of Cutter Spindle. Change Gears. Indexing and Relieving Mechanism. Rotating Feed Mechanism. Spur Guide. Coolan
  • Maximum gear diameter: 6"
    16" Sundstrand H Horizontal Spindle Precision Rotary Surface Grinder
    S/N: 44-49 New: 1969 EQUIPPED WITH: Motor Driven With 20 HP, 3 Phase, 60 Cycle AC Precision Balanced Spindle Wheelhead Drive. 7.5 HP, 3 Phase, 60 Cycle AC Hydraulic Power Supply Drive. 17" Diameter Magne
    • Chuck: 16"
      Bancroft Model Weld-A-Round 300 Rotary Mig Welder
      S/N: 3812/121-339 New: 1999 EQUIPPED WITH: 360° Torch Rotation Plus Adjustable Overlap. Integral Bancroft Wire Feed. 30" Fixture Table. Adjustable Height. Variable Speed Torch Rotation. Variable Speed R
      Daewoo Puma 200C  CNC Turning Center (1998)
      Specifications: Max Turning Diameter: 13.78″ Max Turning Length: 15.75″ Max Bar Capacity: 2.56″ Swing Over Bed: 20.08″ X Axis Travel: 9.53″ Z Axis Travel: 17.32″ Rapid Traverse X Axis: 787 IPM Rapid Traverse Z Ax
      MATSUURA H.PLUS-405 PC12, 2013, FULL 4TH, TSC, 240ATC
      MATSUURA H.PLUS-405 PC12 NEW: 2013 SPECIFICATIONS: PALLET DIMENSIONS................. 19.68" X 19.68" NUMBER OF PALLETS................. (12) PALLET INDEXING................... FULL 4TH AXIS X-A
      • X axis: 25.98"
      • Y axis: 29.13"
        TSUNE FULLY AUTO NON-FERROUS CIRCULAR SAW WITH INCLINE LOADING RACK, 2002
        USED TSUNE FULLY AUTOMATIC NON-FERROUS CIRCULAR SAW WITH INCLINE LOADING RACK , Model TK5M90PL, Year 2002, Stock No. 10599 3.5” cap, 355mm blade, 7.87” max cut length, 20’ inclined loading magazine, 15H.P., Mist lube
        1997 Dainichi F20
        1997 Dainichi F20 Fanuc 21TB Control
        1998 Citizen L20
        1998 Citizen L20 Fanuc 0T Control Bar Feed
        2004 Mori Seiki NL2500SMC Multi Axis Turning Center
        2004 Mori Seiki NL2500SMC Multi Axis Turning Center MSX 850 III Control Kitagawa B210 Chuck (main) / Kitagawa B206 Chuck (Sub) Assortment of Holders and Live Tools
        • Swing: 27.7"
          1999 HAAS HS-1RP HMC
          ROTARY PALLETS, 30HP, 4-AXIS, 24 ATC, CHIP CONVEYOR, UNDER POWER & RUNNING
          • X axis: 24"
          • Y axis: 20"
            SCOTCHMAN MODEL CPO-350LT COLD SAW
            UNDER POWER & RUNNING
            • Blade diameter: 12"
              1995 Caterpillar D6E w/ Angle Blade & Sweeps - Stock Number: E7198
              6 CYL CAT ENGINE, 155 HP, 3 SPD TRANS, 20 INCH PADS, TWIN TILT ANGLE BLADE, FRONT SWEEPS, REAR WINCH
              2014 Caterpillar 312EL W/ ENCLOSED CAB W/ A/C & Heat - Stock Number: E7
              6 CYL CAT ENGINE, 94 HP, QUICK CONNECT, PLUMBING ON STICK, ENCLOSED CAB W/ A/C & HEAT
              Okuma & Howa Millac 40V CNC Vertical Machining Center
              Okuma & Howa Millac 40V CNC Vertical Machining Center Year of Mfg: CNC Control: Fanuc OM Travels: X-Axis: 23" Y-Axis: 16" Z-Axis: 18" Spindle Speed: Up to 8,000 RPM Spindle Taper: CAT 40 S
              • X axis: 23"
              • Y axis: 16"
                Fanuc Robocut Alpha OiB Wire EDM
                Fanuc Robocut Alpha OiB Wire EDM Year of Mfg: 2003 CNC Control: Fanuc 180is-WB Table Size: 12"x8" Max Workpeice Weight: 1,000 lbs Max Workpiece Size: 26" x 17" x 7" Travels: X Axis: 12
                • X axis travel: 12.6"
                • Y axis travel: 8.7"
                  Piranha P36 Hydraulic Ironworker
                  Piranha P36 Hydraulic Ironworker S/N: P36-840, Mfg: 1995, Stock No: 18100 Model P36 Max. Capacity: 40 Tons 13/16" Dia. Through 1/2" Throat Depth: 5" Open
                  • Angle L1: 3125"
                    USED HYD-MECH H-26A HORIZONTAL AUTO BANDSAW WITH 40' OF POWERED CONVEYO
                    Overhead bundling, 40' powered conveyor, 10 H.P., 2" blade, Inverter drive, 28" stroke Rect-Cap (H) 26 inches Rect-Cap (W) 26 inches CNC Control yes Type of CNC Control Mitsubishi Dimensions 155&qu
                    1997 SOUTHWESTERN INDUSTRIES TRAK DPM 3-AXIS CNC BED TYPE MILL, 10" x
                    TABLE TABLE SIZE: 50" X 10" T-SLOTS: 5/8" W X 3 NO. X 2-9/16" PITCH MAXIMUM WEIGHT ON TABLE: 1,320 LBS TRAVELS X-AXIS TRAVEL: 31" Y-AXIS TRAVEL: 17" Z-AXIS TRAVEL: 23.5"
                    • Table width: 10"
                    • Table length: 50"
                      1999 DO-ALL MODEL BRM-DEBURRING MACHINE, 2”  - 6”
                      SPECIFICATIONS CAPACITY, DIAMETER: 2” - 6” CAPACITY (LENGTH): 2” - 6” BELT SPEED: 2 TO 20 FPM PARTS PER HOUR: 200 TO 600 DRIVE MOTOR: 1/42 HP BELT MOTOR: 1/2 HP UPPER BELT MOTOR: 1/2 HP GENERAL DIMENSIONS,
                      • Width: 6"
                        WF WELLS SEMI-AUTO DUAL POST HIGH SPEED BANDSAW F-16-2 400-3,000 FPM, VVP
                        USED W.F. WELLS SEMI-AUTOMATIC DUAL POST HIGH SPEED BANDSAW MODEL F-16-2, Stock 10598, Year 2006 Rect-Cap (H): 16 inches Rect-Cap (W): 20 inches CNC Control: no Dimensions: 97" x 49" x 83" Weight:
                        Price:
                        •  to 
                        <Prev | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | Next>